Search

The effects of four cryoprotectants (dimethylformamide (DMF), ethylene glycol (EG), glycerol and dimethyl sulfoxide (DMSO)) on monolayers of four phospholipids were investigated at high cryoprotectant concentration (10% v/v) relevant to cryoprotection, and compared with previous work at lower concentrations (5% v/v). The results show that the interactions between cryoprotective agents (CPAs) and lipids are complex, with significant differences identified as functions of CPA, concentration and phospholipid species. It was observed that generally DMF and EG cause monolayer compaction, whereas glycerol causes expansion (penetrating the monolayer), although each exhibited subtle differences with different phospholipids. DMSO showed significant differences depending on the headgroup (phosphatidylcholine vs phosphatidylethanolamine) and the physical state of the monolayer. In addition, it was found that DMF was the only CPA capable of penetrating monolayers at physiologically relevant lateral pressures. The results highlight that conclusions based on a single model system (e.g. DPPC) should not be extrapolated to other lipids, and there is a need to study a wider range of lipid species and CPA concentrations in order to understand their mechanisms of action more fully. The interactions between four cryoprotectants and monolayers of four phospholipids were investigated. Significant differences are observed as functions of cryoprotectant, lipid species and physical state of the monolayer, highlighting that results based on a single model system are insufficient to understand the mechanisms of action of cryoprotectants. [ABSTRACT FROM AUTHOR]

Fatty acids, cholesterol, and phospholipids are amphiphilic compounds of biological interest, which form ordered monolayers mimicking biomembranes, and can be studied with the Langmuir technique using surface pressure-area isotherms and compressibility plots. Proteins are also components of biomembranes or are present in body fluids. In this study, the influence of lysozyme on different films of a fatty acid (stearic acid or oleic acid), cholesterol, a phospholipid (dipalmitoylphosphatidylcholine, DPPC, or palmitoyloleoylphosphatidylcholine, POPC), and mixtures of them is presented using a 0.9% saline solution as subphase. Results show that the presence of lysozyme alters the lipid monolayer formation in an important way at the beginning (low surface pressures) and the middle (intermediate surface pressures) parts of the isotherm. At high surface pressures, the phospholipids DPPC and POPC and the saturated fatty acid, stearic acid, expel lysozyme from the surface, while oleic acid and cholesterol permit the presence of lysozyme on it. The mixtures of oleic acid-DPPC also expel lysozyme from the surface at high surface pressures, while mixtures of oleic acid-POPC and cholesterol-POPC permit the presence of lysozyme on it. The compressibility of the monolayer is affected in all cases, with an important reduction in the elastic modulus values and an increase in the fluidity, especially at low and intermediate surface pressures. [ABSTRACT FROM AUTHOR]

The current strategies to eradicate bacteria require that the antimicrobial agent either penetrate or disrupt the bacterial membrane. In Escherichia coli (E.coli) as a model of Gram-negative strains, the antimicrobials have to cross two barriers -- the outer and the inner membrane being the latter composed by ~ 77% phosphatidylethanolamine (PE), ~ 13% phosphatidylglycerol (PG) and ~ 10% cardiolipin (CL) lipids. Each one of these lipid families shares the same headgroup, but contains acyl chains with varying length and degree of unsaturation. Bacteria adapt their membrane lipid composition and metabolism in response to environmental signals, such as the temperature, resulting in different interactions with exogenous molecules, e.g. antibacterial agents. Herein, bacterial model membranes are prepared to evaluate the lipid-lipid interactions in Langmuir monolayers of binary mixtures at several molar ratios of PE and PG or CL at human physiological temperature (37°C). Both PE:PG and PE:CL monolayers were stable at 37°C and presented higher molecular areas (> 20 Ų/molecule) than at 23°C. However, these lipid mixtures presented liquid-expanded state and rigidity (inverse of the compressibility modulus ~ 90 mN/m) slightly lower than at 23°C. Such athermalicity at biologically relevant temperatures may favour the preservation of the biological functions of E.coli. [ABSTRACT FROM AUTHOR]

Highlights • Biomimetic membranes are prepared using the natural myriad of each lipid structures that constitute the bacterial membrane. • The biomimetic membranes are very elastic due to the presence of several unsaturations in the lipids structures. • The model membranes present the same physical state and minor rigidity differences regardless the PE:PG or PE:CL ratio. • The similar rigidity suggests that the changes in the lipid composition may influence the membrane proteins function. Abstract Novel antimicrobial agents are focused to interact with the bacterial membrane whose lipid composition (number and position of unsaturations and lipid headgroup) is adapted according to environmental signals. The anticipation of the adapted membrane properties is of high relevance to increase the targetability of such drugs. Herein, natural lipids extracted from Escherichia coli -phosphatidylethanolamine (PE), phosphatidylglycerol (PG) and cardiolipin (CL)- are used to form biomimetic membranes constituted by several PE:lipid ratios using the Langmuir and Langmuir-Blodgett techniques. The use of these techniques and the natural myriad of each lipid structures that constitute the biological E.coli membrane establishes a simple and reproducible model to evaluate the lipid-lipid interactions. PE and PG present similar shape and size, thus establish ideal and fluid -liquid expanded (LE) state - mixtures, whereas the differences between PE and CL motivate the formation of non-ideal and fluid (LE state) mixtures. The same physical state and the minor differences in elasticity (differences in the inverse of the compressibility modulus < 15 mN·m−1) between both systems regardless the PE content in the (PE:lipid) mixture suggest that the changes in the lipid composition influence the membrane proteins function rather than affecting the rigidity of the bacterial membrane. [ABSTRACT FROM AUTHOR]

Silver nanoparticles (Ag NPs) appeared as promising antimicrobial candidates to face the development of antibiotic resistance. Although reported as toxic towards mammalian cells, their combination with biomolecules have shown reduced toxicity, while maintaining the antimicrobial function. Herein, hyaluronic acid (HA) with low (40 kDa), medium (200 and 600 kDa) and high (2 MDa) molecular weight (Mw) was modified with adipic acid dihydrazide (ADH) and used as reducing and capping agents to synthesise antimicrobial hybrid Ag NPs. The Mw of the polymer played a crucial role in the morphology, size and antibacterial activity of the Ag NPs. The 600 and 200 kDa HA-ADH-Ag NPs were able to reduce the Escherichia coli and Staphylococcus aureus concentration by more than 3 logs, while the 40 kDa NPs reached ~2 logs reduction. The 2 MDa HA-ADH failed to form homogenous NPs with strong bactericidal activity. A mechanistic study of the interaction with a model bacterial membrane using Langmuir isotherms confirmed the greater interaction between bacteria and higher Mw polymers and the effect of the NP's morphology. The nanocomposites low toxicity to human skin cells was demonstrated in vitro, showing more than 90% cell viability after incubation with the NPs. [ABSTRACT FROM AUTHOR]

• Lipid-containing artificial tears can be studied with the Langmuir technique. • Interactions between natural tear components and lipid tears can be investigated. • Albumin and lysozyme proteins interact strongly with lipid tear products. • The influence of albumin and lysozyme on lipid π-A isotherms, at pH of 7.4, is opposite. • The natural tear components affects the fluidity of the lipid layer. We studied the behaviour of three lipid tear products, commercialised by the same brand, as Langmuir films at the air/liquid interface to simulate the ocular environment. No significant differences were observed in the surface behaviour of two of them disclosing the same composition, but commercialised for different applications. The interaction of several subphases, namely sodium chloride, glucose, albumin and lysozyme present in the natural tear, with the lipid films was assessed at room temperature and the temperature of human tear using surface pressure-area isotherms and elastic modulus plots. There is a notable influence of sodium chloride and the proteins albumin and lysozyme on the surface pressure-area isotherm of the lipid Langmuir films. Albumin shifted this isotherm to lower areas while an opposite shift was caused by lysozyme. These studies could be useful for the formulation of new lipid-containing artificial tears, and for increasing the confidence of the customers in commercial eye care formulations. [ABSTRACT FROM AUTHOR]

• DMSO expands the area per lipid for DPPC, but causes compression for POPC, highlighting species dependent effects. • Ethylene glycol and glycerol expand monolayers regardless of lipid species, implying they insert into the headgroup region. • Dimethylformamide compresses the monolayer for all lipid species, implying it dehydrates the lipid head groups. • Under physiological conditions, the penetrating action of cryoprotectants may only occur for unsaturated phospholipids. The influence of four common cryoprotectants (dimethyl sulfoxide, glycerol, ethylene glycol and dimethylformamide) on monolayers of four common phospholipids (DPPC, DOPC, POPC and POPE) have been studied using Langmuir isotherms and monolayer insertion experiments. The cryoprotectant concentrations were chosen to be directly relevant to cryoprotection. We show that DMSO causes an expansion of the DPPC area per lipid (in contrast to previous work at higher concentrations). However, it caused compression for POPC, and had little effect for POPE or DOPC. As most previous studies have involved only DPPC, this highlights the importance of studying different lipid types as these may have a significant effect on the interactions. We show that both ethylene glycol and glycerol cause a small expansion of the monolayer at fixed pressure, implying that they insert into the headgroup regions, regardless of lipid species, and consistent with their ability to penetrate membranes. By contrast, dimethylformamide causes monolayer compression for all lipid species, implying it dehydrates the lipid head groups. Membrane insertion experiments at physiological values of lateral pressure highlight that DPPC is the most difficult lipid to penetrate, implying that the penetrating action of cryoprotectants may only occur for unsaturated phospholipids. Thus, extrapolations of results based solely on the DPPC need to be made with care. [ABSTRACT FROM AUTHOR]

The photosynthesis is the process used by plants and bacteria cells to convert inorganic matter in organic thanks to the light energy. This process consist on several steps, being one of them the electronic transport from the photosystem II to the cytochrome thanks to plastoquinone-9 (PQ). Here we prepare membranes that mimic the characteristics and composition of natural photosynthetic cell membranes and we characterize them in order to obtain the PQ molecules position in the membrane and their electrochemical behaviour. The selected galactolipid is digalactosyldiacylglycerol (DGDG) that represents the 30% of the thylakoid membrane lipid content. The results obtained are worthful for several science fields due to the relevance of galactolipids as anti-algal, anti-viral, anti-tumor and anti-inflammatory agents and the antioxidant and free radical scavenger properties of prenylquinones. Both pure components (DGDG and PQ) and the DGDG:PQ mixtures have been studied using surface pressure–area isotherms. These isotherms give information about the film stability and indicate the thermodynamic behaviour of the mixture and their physical state. The Langmuir–Blodgett (LB) film has been transferred forming a monolayer that mimics the bottom layer of the biological membranes. This monolayer on mica has been topographically characterized using AFM and both the height and the physical state that they present have been obtained. Moreover, these monolayers have been transferred onto ITO that is a hydrophilic substrate with good optical and electrical features, so that, it is suitable for studying the electrochemical behaviour of these systems and it is a good candidate for energy producing devices. [ABSTRACT FROM AUTHOR]

The antibacterial activity of chitosan modified with the thiol-containing 2-iminothiolane HCl (TC-IMI) and N-acetyl-l-cysteine (TC-NAC) was studied by Langmuir film balance technique using a dipalmitoylphosphatidylglycerol (DPPG) monolayer bacterial membrane model. The interactions of the biopolymer with the membrane model were assessed by monitoring the differences in the shape of the compression isotherms recorded in the absence and presence of chitosan and thiolated conjugates in the subphase. A low molecular weight chitosan (15kDa) shifted the compression isotherms of DPPG monolayers towards larger areas (A 0,CS =145Å2), confirming its membrane disturbance capacity. Further thiolation induced higher yield of expansion, more pronounced in the case of TC-IMI. The expansion of the monolayer increased significantly (A 0,TC-NAC =150Å2 vs A 0,TC-IMI =175Å2) and the elasticity at a surface pressure of 30mN/m, typical for bio-membranes decreased to a greater extent =120mN/mvs =87mN/m) in presence of TC-IMI. Antibacterial tests against a Gram-negative Escherichia coli and a Gram-positive Staphylococcus aureus were in good agreement with these findings, suggesting that chitosan thiolated with 2-iminothiolane HCl acts as a bactericide disrupting the integrity of the bacterial cell membrane. [ABSTRACT FROM AUTHOR]

To palliate the appearance of antimicrobial resistance (AMR), the use of bactericidal agents acting differently than conventional antibiotics and the elimination of bacterial biofilm, are the two most promising strategies. Here, we integrated these two complementary strategies into new antimicrobial metal-enzyme nanoaggregates (NAs) of α-amylase and silver (αAgNAs) that are able to eliminate bacteria and their biofilm. The nanoparticle (NP) synthesis approach applied protein desolvation and laccase-mediated NP stabilization to innovatively produce catalytically active α-amylase nanoparticles (αNPs) for the elimination of the bacterial biofilm. At the same time, αNPs efficiently reduced silver for the incorporation of bactericidal Ag 0 and formation of the αAgNAs. The bactericidal and antibiofilm efficacies of αAgNAs were demonstrated by 5.4 and 6.1 log reduction of Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, respectively, and more than 80% removal of their biofilms, coupled with high biocompatibility. The biofilm-αAgNA interaction was assessed by quartz crystal microbalance and atomic force microscopy revealing how the degradation of a settled biofilm by αAgNAs caused an increase of the biofilm water content, thus weakening the biofilm surface attachment and facilitating its removal. With the present work, we not only provide a new efficient antimicrobial material to face the AMR threat, but we also envisage that the newly established method for the synthesis of metal-enzyme NAs is potentially transferable to other biocatalysts to expand the enzyme NP toolbox.

Photosynthetic organisms use light to convert the inorganic matter in organic one. Photosynthetic process consists on several steps, and one of them involves plastoquinone (PQ) that acts as electron and proton shuttle between photosystem II and cytochrome. We prepared membranes that mimic the characteristics and composition of natural photosynthetic membranes and we characterized them using several techniques in order to obtain both the PQ molecules disposition in the membrane and their electrochemical behavior. The selected lipid was monogalactosyldiacylglycerol (MGDG) that represents the 50% of the lipid content of the thylakoid membrane. Both MGDG and PQ, and the MGDG:PQ mixtures have been studied using surface pressure-area isotherms and the presence of PQ alters the physical state and compactness of the MGDG matrix. Langmuir-Blodgett (LB) films have been obtained by transferring a monolayer that mimics half of the bilayer of a biological membrane. The AFM topographical characterization of the monolayers on mica indicates the presence of differentiated domains, corresponding to different physical states linked to the influence of the PQ content. Moreover, the electrochemical behavior of the monolayers has been studied when transferred on ITO, observing one main electrochemical process that is due to the diving position of PQ molecules in the lipid matrix.

Bacterial-mediated diseases are a major healthcare concern worldwide due to the rapid spread of antibiotic-resistant bacteria. One strategy to manage the bacterial infections while avoiding the emergence of resistant strains implies specific targeting and disruption of bacteria membranes. This work evaluates the potential of nanostructured biopolymer derivatives, nanocapsules (NCs), to disrupt the bacteria cell walls and effectively kill planktonic microorganisms. Two biopolymers, chitosan and cellulose, were chemically modified to synthesize derivatives with improved cationic character (thiolated chitosan and aminocellulose) prior to their processing into nanocapsules via a one-step sonochemical process. The interactions of NCs, displaying an average size of around 250 nm, with bacteria membrane were evaluated using two membrane models: Langmuir monolayers and liposome bilayers composed of a l-α-phosphatidylglycerol phospholipid extracted from Escherichia coli. NCs possessed improved membrane disturbing capacity in comparison to the nonprocessed biopolymer derivatives, by drastically increasing the monolayer fluidity and inducing more than 50% leakage of a dye inserted in the bilayered liposomes. In addition, membrane disturbance was directly proportional to the NCs cationic charge. Whereas evidence showed that thiolated chitosan and aminocellulose interacted with the bacteria membrane through a "carpet model", the NCs were found to induce larger surface defects and high local perturbance through a "detergent model". Importantly, the degree of disruption caused by the biopolymer derivatives and NCs correlated well with the antimicrobial capacity against Escherichia coli, selectively killing bacteria cells without imparting toxicity to human fibroblasts.

Ubiquinone (UQ) is one of the main electron and proton shuttle molecules in biological systems, and dipalmitoylphosphatidylcholine (DPPC) is one of the most used model lipids. Supported planar bilayers (SPBs) are extensively accepted as biological model membranes. In this study, SPBs have been deposited on ITO, which is a semiconductor with good electrical and optical features. Specifically, topographic atomic force microscopy (AFM) images and force curves have been performed on SPBs with several DPPC:UQ ratios to study the location and the interaction of UQ in the SPB. Additionally, cyclic voltammetry has been used to understand the electrochemical behavior of DPPC:UQ SPBs. Obtained results show that, in our case, UQ is placed in two main different positions in SPBs. First, between the DPPC hydrophobic chains, fact that originates a decrease in the breakthrough force of the bilayer, and the second between the two leaflets that form the SPBs. This second position occurs when increasing the UQ content, fact that eventually forms UQ aggregates at high concentrations. The formation of aggregates produces an expansion of the SPB average height and a bimodal distribution of the breakthrough force. The voltammetric response of UQ depends on its position on the bilayer.