Search

The transient performance of solar thermal power plants is critical to the system design and optimization. This study numerically investigates the dynamic efficiencies of an open-loop air receiver and a thermal energy storage unit. One-dimensional dynamic models of the air receiver and thermal energy storage were developed using the Modelica language with a graphical user interface and the Dymola solver to provide comprehensive thermal simulation at low computational cost. An air receiver and thermal energy storage experimental platforms were built to validate the simulation models. The simulation results compare well with the experimental data, so the models can be used to predict the variations of air receiver and thermal energy storage efficiencies. The models were then combined into a receiver and thermal energy storage system model with control schemes. The schemes control the air receiver outlet air temperature at relatively stable values while the thermal energy storage automatically switches between charging, discharging and stand-by modes. [ABSTRACT FROM AUTHOR]

Abstract: The discontinuous nature of the solar energy forces to study the dynamic behavior of solar plants to characterize their operations, to deepen their process understanding and to improve the performance and maintenance. The present paper focuses on the dynamic simulation and control of concentrating solar plants with the aim to define a reasonably simplified layout as well as to highlight the main issues to characterize the process dynamics of these energy systems and their related energy storages. Detailed first-principles mathematical models of key unit operations are developed, implemented, and integrated into commercial codes to improve the reliability of the plant dynamic simulation as well as the prevision accuracy. The case of Archimede concentrating solar power plant with the related two-tanks direct thermal energy storage technology is investigated. [Copyright &y& Elsevier]

Thermal energy storage system in concentrating solar power plants can guarantee sustainable and stable electricity output in case of highly unstable solar irradiation conditions. In this paper, the lumped parameter method is used to develop the models of different thermal energy storage systems. In order to improve the reliability as well as the prediction accuracy of developed models, the charging/discharging process is firstly simulated, and then the dynamic characteristics of thermal energy storage systems are fully tested by imposing 15% step disturbance of mass flow. The results show that the charging/discharging characteristics of the three different thermal energy storage systems are almost the same, which have little to do with the storage mediums used in the systems. Besides, for the representative 1MWe solar parabolic trough power plant, a 15% step up disturbance of oil mass flow will result in a small increase (1.8% and 1.3% respectively) on the outlet temperature of oil and molten salt. On the other side, a 15% step down disturbance of oil mass flow will lead a 2.7% and 2.2% decrease on the outlet temperature of oil and molten salt respectively. In order to verify the validity of the proposed models, the simulation results are compared with both the design points and representative experimental data from the 1MWe solar parabolic trough power plant. The results show that the maximum relative error is not more than 1% when comparing with the design points and the maximum relative error is not more than 12% when comparing with the representative experimental data. Conclusions of this paper are good references for system design, control and commissioning of concentrating solar power plants. • Thermal energy storage can provide sustainable and stable electricity output. • Lumped parameter method is used to build the model of thermal energy storage. • The dynamic characteristics are tested by a 15% step disturbance of mass flow. • A 15% step-up will result in a 1.3% increase in molten salt outlet temperature. • A 15% step down will result in a 2.2% decrease in molten salt outlet temperature. [ABSTRACT FROM AUTHOR]