Search

Glomeremus orchidophilus (Gryllacrididae) is a flower visiting cricket on the tropical island La Réunion. This species is the only Orthoptera shown to be a pollinator of a plant. We studied its nectar feeding behavior and mouthpart morphology in detail. Since G. orchidophilus possesses biting-and-chewing mouthparts, our objective was to find behavioral and/or structural specializations for nectar-feeding. The comparative analysis of feeding behavior revealed that fluid is taken up without movements of the mouthparts in Glomeremus . A comparative morphological examination of two Glomeremus species, together with several representatives of other Gryllacrididae and other Ensifera taxa revealed subtle adaptations to fluid feeding in Glomeremus . All representatives of Gryllacrididae were found to possess a distinct patch of microtrichia at the tip of their galeae. However, in Glomeremus a channel is formed between the distal components of the maxillae and the mandibles on each side of the body. Micro-CT and SEM examination revealed a longitudinal groove that extends over the galea beginning at the patch of microtrichia in the studied Glomeremus species. We hypothesize that the microtrichia take up fluid by capillarity and the action of the cibarium and pharyngeal pumps transports fluid along the channels between the maxillae and mandibles into the preoral cavity. These mouthpart features allow nectar uptake from flowers that is unique in Orthoptera. [ABSTRACT FROM AUTHOR]

Simple Summary: Female frog-biting midges exclusively feed on blood from frogs. They are attracted by the calling of male frogs and search for specific feeding sites on their host's body. To feed, these blood-feeding midges use a very short proboscis that is composed of six piercing structures and an enclosing component. We analyzed the morphology of the mouthparts using SEM and compared these with the well-studied proboscises of other blood-feeding flies. Females of Corethrella share more similarities to the very small blood-feeding short-proboscid biting midges, black flies and sand flies than to their more closely related long-proboscid mosquitoes. We interpret our findings in the functional context of a very short piercing proboscis and its possible specialization to pierce frogs. Females of frog-biting midges (Corethrellidae) obtain their blood meals from male calling frogs. While the morphology of the feeding apparatus is well studied in hematophagous Diptera that impact humans, frog-biting midges have received far less attention. We provide a detailed micromorphological examination of the piercing blood-sucking proboscis and maxillary palpus in three Corethrella species using scanning electron microscopy and histological semi-thin sectioning. We also compare the sensilla found on the proboscis tip and the palpus of Corethrella with other piercing blood-sucking Diptera. Corethrella spp. have a proboscis length of about 135 µm, equipped with delicate mandibular piercing structures composing the food canal together with the labrum and hypopharynx. Their proboscis composition is plesiomorphic and more similar to other short-proboscid hematophagous Culicomorpha (e.g., Simuliidae), in contrast to the phylogenetically more closely related long-proboscid Culicidae. As in other short-proboscid taxa, the salivary canal in Corethrella spp. transitions into an open salivary groove with one mandible forming a seal, whereas in Culicidae the salivary canal is closed until the tip of the proboscis. We discuss the possible functional constraints of very short, piercing blood-sucking proboscises (e.g., dimensions of host blood cells) that may limit the size of the food canal. [ABSTRACT FROM AUTHOR]

Simple Summary: Adult Yellowjackets only take up sugar-rich liquid for their daily diet. As these fluids are usually collected from sources with high amounts of various particles, such as fruit flesh or shards of bark, it is important to filter these particles, especially as these animals have a wasp waist with a constriction of the gut, through which the ingested fluid has to pass. We conducted experiments with variously-sized glass particles that were provided in a sugar solution. Female workers of the German Wasp were X-rayed after the food uptake. Possible areas of filtration were investigated with scanning electron microscopy to visualize the surface structures. We could identify two possible areas with filtration function. The first is at the frontal part of the mouthparts, at which the animals could prevent the uptake of particles that were larger than 0.2 mm. A second area inside the head with rows of interlinking hair-like structures enables much finer filtration. Particles that were bigger than 0.15 mm were reliably filtered. The particles that were filtered at this second filtration area were stored in a pouch-like organ inside the head. Smaller particles were also filtered, but some of these were able to pass. These results demonstrate fluid filtration, a poorly-studied topic of insect morphology and behavior. The mouthparts of Vespidae have evolved to forage various solid and liquid foods, such as animal prey, carbohydrate-rich fluids, as well as woody fibres for nest construction. Before nutritional fluids are ingested into the crop, bigger particles need to be filtered out. This study examined the functional morphology of the mouthparts, the preoral cavity, and the proximal alimentary tract inside the head focusing on this filtration process. The feeding organs and preoral cavity were studied using µCT and SEM that were complimented by feeding experiments with glass beads in workers of Vespula germanica. To visualize fluid ingestion into the head and alimentary tract, barium sulfate solution was used as contrast agent; a method that is rarely applied in entomology. Experimental results indicate that large glass beads (>212 µm) were filtered by the mouthpart structures before entering the preoral cavity. Smaller glass beads (152–212 µm) were found inside the infrabuccal pocket in front of the mouth. Morphological evidence indicates that cuticle structures of the epipharynx, hypopharynx, and cibarium filter this particle size inside the preoral cavity while glass beads < 152 µm reach the crop. A double fluid filtration system is proposed that is formed by (1) bristles of the mouthparts and (2) microtrichia of the preoral cavity. [ABSTRACT FROM AUTHOR]

The mouthparts of the spoon-winged lacewing Nemoptera sinuata are adapted for the uptake of pollen and nectar. Form and function of the mouthparts are described, and the technique of food uptake is discussed in context with flower-visiting behaviour and floral architecture of the preferred flowers. The maxillae are the main organs for food uptake. The brush-shaped laciniae, galeae and maxillary palpi form a functional unit which can be extended by the action of the cardo-stipes joint. Video analyses of the mouthpart movements distinguished different patterns of maxillary motions which occur in nectar feeding or pollen collecting. The flower-visiting behaviour and the specialised mouthparts of the Nemopteridae are derived traits which probably evolved from predatory and biting/chewing mouthparts within the Neuroptera. [ABSTRACT FROM AUTHOR]

Abstract: This review deals with the morphology and function of adult insect mouthparts modified to feed on nectar, pollen or petals. Specialization to nectar-feeding is evident in formation of proboscides of various lengths and designs. Proboscides of many Hymenoptera and Diptera function according to adhesion mechanisms that load nectar onto extensible apical mouthpart regions before fluid is conveyed along the food canal to the mouth by capillarity and suction. Predominantly suctorial proboscides evolved once in Lepidoptera, probably twice in Coleoptera, variously in some Hymenoptera and several times with similar design in Diptera. Many of them are particularly long and have sealed food tubes, specialized apical regions, new proboscis resting positions and modified feeding movements. Mouthparts of obligate pollen-feeding insects can be characterized by modified mandibles, specialized bristles for pollen manipulation and elaborate feeding movements. Often saliva is crucial for pollen retention and ingestion. In Coleoptera, intact pollen is gathered by sweeping movements of mouthparts; in Diptera, it is suspended in saliva prior to suction. Pollen is crushed by asymmetrical mandibles in aglossatan Lepidoptera and one group of basal Hymenoptera. Pollen-piercing mouthparts occur in Thysanoptera and one group of Diptera. Some butterflies and few Diptera extract nutrients from pollen by mixing it externally with saliva on their mouthparts. No mouthpart specializations to petal-feeding are reported in flower-visiting insects. [Copyright &y& Elsevier]

The morphology and functional anatomy of the mouthparts of pollen wasps (Masarinae, Hymenoptera) are examined by dissection, light microscopy and scanning electron microscopy, supplemented by field observations of flower visiting behavior. This paper focuses on the evolution of the long suctorial proboscis in pollen wasps, which is formed by the glossa, in context with nectar feeding from narrow and deep corolla of flowers. Morphological innovations are described for flower visiting insects, in particular for Masarinae, that are crucial for the production of a long proboscis such as the formation of a closed, air-tight food tube, specializations in the apical intake region, modification of the basal articulation of the glossa, and novel means of retraction, extension and storage of the elongated parts. A cladistic analysis provides a framework to reconstruct the general pathways of proboscis evolution in pollen wasps. The elongation of the proboscis in context with nectar and pollen feeding is discussed for aculeate Hymenoptera. [Copyright &y& Elsevier]

Abstract Krenn, H. W. 2000. Proboscis musculature in the butterfly Vanessa cardui (Nymphalidae, Lepidoptera): settling the proboscis recoiling controversy. —Acta Zoologica (Stockholm) 81: 259–266 The proboscis of Vanessa cardui (Nymphalidae) contains two basal galeal muscles and two different series of numerous oblique muscles. Both muscle series extend from the proximal region up to the tip-region; the individual muscles of each series run a constant course throughout the proboscis. In contrast to other butterflies, the knee bend region does not have additional types of muscles. The analysis of shock-frozen proboscises reveals that the dorsal wall is arched outwardly in the uncoiled, feeding position whereas in the coiled, resting position the dorsal proboscis wall is flat or concave. This results in a significantly greater cross-sectional area due to the significantly greater dorso-ventral diameter in uncoiled proboscises. After freezing the proboscis in its distal region, it can still be uncoiled, however, it cannot be fully recoiled. These morphometric and experimental results indicate that the oblique proboscis muscles are responsible for recoiling the proboscis to the resting position. [ABSTRACT FROM AUTHOR]

Simple Summary: Flies with a particularly long proboscis are characteristic of flower-visiting insects in the Greater Cape Floristic Region of South Africa. We studied an endemic nemestrinid fly species in a small isolated area of semi-natural vegetation where these insects were the only flower visitors that could drink nectar from the available long-tubed flowers of one plant species. We examined the mouthpart structures that are important for nectar uptake and the length and diameter of the proboscis in comparison with the flower sizes. This local one-to-one interaction between the fly population and its nectar host flower gave the opportunity to quantify the nectar resources available for the nemestrinid flies at the study site. By comparing the offered nectar volumes before and after flower visits, the average meal size could be estimated. Assessments of the nectar levels from measured quantities and flower size allowed us to make predictions of how various proboscis lengths could reach nectar inside floral tubes. Several Prosoeca (Nemestinidae) species use a greatly elongated proboscis to drink nectar from long-tubed flowers. We studied morphological adaptations for nectar uptake of Prosoecamarinusi that were endemic to the Northern Cape of South Africa. Our study site was a small isolated area of semi-natural habitat, where the long-tubed flowers of Babiana vanzijliae (Iridaceae) were the only nectar source of P. marinusi, and these flies were the only insects with matching proboscis. On average, the proboscis measured 32.63 ± 2.93 mm in length and less than 0.5 mm in diameter. The short labella at the tip are equipped with pseudotracheae that open at the apical margin, indicating that nectar is extracted out of the floral tube with closed labella. To quantify the available nectar resources, measurements of the nectar volume were taken before the flies were active and after observed flower visits. On average, an individual fly took up approximately 1 µL of nectar per flower visit. The measured nectar quantities and the flower geometry allowed estimations of the nectar heights and predictions of necessary proboscis lengths to access nectar in a range of flower tube lengths. [ABSTRACT FROM AUTHOR]

Abstract: Few species of true butterflies (Lepidoptera: Papilionoidea) have evolved a proboscis that greatly exceeds the length of the body. This study is the first to examine the morphology of an extremely long butterfly proboscis and to describe how it is used to obtain nectar from flowers with very deep corolla tubes. The proboscis of Eurybia lycisca (Riodinidae) is approximately twice as long as the body. It has a maximal length of 45.6 mm (mean length 36.5 mm ± 4.1 S.D., N = 20) and is extremely thin, measuring only about 0.26 mm at its maximum diameter. The proboscis has a unique arrangement of short sensilla at the tip, and its musculature arrangement is derived. The flower handling times on the preferred nectar plant, Calathea crotalifera (Marantaceae), were exceptionally long (mean 54.5 sec ± 28.5 S.D., N = 26). When feeding on the deep flowers remarkably few proboscis movements occur. The relationship between Eurybia lycisca and its preferred nectar plant and larval host plant, Calathea crotalifera, is not mutualistic since the butterfly exploits the flowers without contributing to their pollination. We hypothesize that the extraordinarily long proboscis of Eurybia lycisca is an adaptation for capitalizing on the pre-existing mutualistic interaction of the host plant with its pollinating long-tongued nectar feeding insects. [Copyright &y& Elsevier]

Female Pangoniinae in the tabanid fly genus Philoliche can display remarkably elongated proboscis lengths, which are adapted for both blood- and nectar-feeding. Apart from their role as blood-sucking pests, they represent important pollinators of the South African flora. This study examines the morphology of the feeding apparatus of two species of long-proboscid Tabanidae: Philoliche rostrata and Philoliche gulosa – both species display adaptations for feeding from a diverse guild of long-tubed flowers, and on vertebrate blood. The heavily sclerotised proboscis can be divided into two functional units. The short, proximal piercing part is composed of the labrum-epipharynx unit, the hypopharynx and paired mandible and maxilla. The foldable distal part is composed of the prementum of the labium which solely forms the food canal and is responsible for nectar uptake via the apical labella. The proboscis works as a drinking straw, relying on a pressure gradient provided by a two-part suction pump in the head. Both proboscis and body lengths and suction pump dimensions show a significantly correlated allometric relationship with each other. This study provides detailed insights into the adaptations for a dual diet using an elongated sucking proboscis, and considers these adaptations in the context of the evolution of nectar feeding in Brachycera. [ABSTRACT FROM AUTHOR]