Search

Abstract: This study used a twin-gun magnetron sputtering system to deposit ZrO2-silver (Ag) coatings on biograde pure-titanium implant materials, and the Ag content in the deposited coatings was controlled by the magnetron power. The films were then annealed using rapid thermal annealing at 350°C for 2min to induce the nucleation and growth of nanoparticles on the film surface. Staphylococcus aureus (S. aureus) and Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans) were used for in vitro antibacterial analyses. The cytocompatibility, mRNA expression, and adhesive morphology of human gingival fibroblast (HGF) cells on the coatings were also determined. The obtained results suggest that ZrO2-Ag composite coatings containing less than 10.6at.% Ag show hydrophobicity, good viability and proliferation of HGF cells, and antibacterial effects on S. aureus and A. actinomycetemcomitans. Moreover, the antibacterial performance of ZrO2-Ag coatings is superior to that pure-titanium whilst maintaining biological compatibility. [Copyright &y& Elsevier]

Abstract: Composite metal nitride–metal (MeN–Me) physical vapor deposited (PVD) films (e.g. TaN–Cu, TiN–Cu, ZrN–Ag, etc.) are often considered for applications such as tribological and antibacterial coatings. In this study, ZrN, ZrO2–Ag and ZrNO–Ag coatings with different Ag contents were deposited by reactive magnetron sputtering. Monoclinic ZrO2 and fcc Ag composite structures were obtained when Zr and Ag were cosputtered to react with oxygen. ZrNO–Ag showed a porous structure containing monoclinic ZrO2, fcc Ag and Zr2ON2. Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans) and Staphylococcus aureus (S. aureus), major pathogens frequently found in the implant-associated infections, were cultured on the coated samples. The antibacterial effects were determined using in vitro anti-bacterial analyses by a fluorescence staining method employing Syto9 and bacterial viability agar tests. In addition, the biocompatibility of human gingival fibroblast (HGF) cells on coatings was also evaluated by a MTT test assay. It showed that the nanostructure and Ag content of the ZrO2–Ag and ZrNO–Ag coatings were correlated with the biocidal property. The ZrN coating deposited by magnetron sputtering did not improve the bacterial reduction of A. actinomycetemcomitans and S. aureus. The ZrO2–Ag and ZrNO–Ag coated samples had lower bacterial retention, and the ZrNO–Ag coatings with silver content of 11.8at.% possessed the best antibacterial performance with excellent HGF cell compatibility as well. [Copyright &y& Elsevier]

Abstract: Bacterial adhesion and colonization are considered to play key roles in the pathogenesis of peri-implant disease, which is an inflammatory process leading the destruction of both soft and hard tissue around a Titanium (Ti) implant. The osseointegration of Ti implants is influenced by their composition and surface treatment. Zirconia (ZrO2) coatings have been shown to improve implant osseointegration in various biomedical fields, including orthopedic devices and dental implants. This study used a twin-gun magnetron sputtering system to deposit ZrO2–Sliver (Ag) and ZrO2–Copper (Cu) coatings on biograde pure-Ti implant materials. The effects of Ag and Cu on the antibacterial properties of the coated Ti samples were investigated using Staphylococcus aureus (S. aureus) and Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans), which are found frequently in implant-associated infections. The in vitro antibacterial analyses employed a fluorescence staining method using SYTO9 and bacterial-viability tests on agar plates. Incorporating Ag and Cu into ZrO2 changed the structure of crystalline ZrO2, and the nanostructures of the resulting ZrO2–Ag and ZrO2–Cu coatings were found to be correlated with the antibacterial performance. The adherence of S. aureus and A. actinomycetemcomitans was less for ZrO2 samples with a small doping of Cu than for uncoated Ti. The ZrO2–Ag coating with an Ag content of 10.6at.%, which showed hydrophobicity, exhibited the lowest bacterial retention and viability of S. aureus and A. actinomycetemcomitans. The results suggest that ZrO2–Ag and ZrO2–Cu coatings improve the antibacterial performance relative to pure-Ti implant materials. [Copyright &y& Elsevier]

Titanium (Ti)-based materials are widely used in biomedical implant components and are applied successfully in various types of bone-anchored reconstructions. However, in dental implants the Ti materials contact not only bone but also gingival tissues, and are partially exposed to the oral cavity that includes bacteria. This study used titania and silver (TiO/Ag) compound coatings and zinc oxide (ZnO) films to enhance the antibacterial activity of the Ti-based implant. The hydrophobicity of each sample was examined by measuring the contact angle. Streptococcus mutans and human gingival fibroblast (HGF) was cultured on the coated samples, and the antibacterial effects and cell compatibility were determined using a Syto9 fluorescence staining and MTT methods. For the TiO/Ag samples, depositing Ag on the plate at a higher power (which increased the proportion of Ag) increased the contact angle and the hydrophobicity. The bacterial count was lowest for the 50 W TiO/Ag sample, which contained 5.9% Ag. The contact angles of the ZnO samples did not show the same tendency. The antibacterial effect was higher on ZnO-coated samples since bacterial count was threefold lower on ZnO samples as compared to control samples (Ti plate). From the MTT assay test, the mean optical density values for TiO/Ag-coated samples after 72 h of HGF adhesion were similar to the value obtained from the uncoated Ti. However, biocompatibility was lower on ZnO films than in control samples. Conclusively, the antibacterial activity was higher but the cell compatibility was lower on ZnO films than on TiO/Ag coatings. [ABSTRACT FROM AUTHOR]

Abstract: Titanium (Ti)-based materials have been used for dental and orthopedic implants because of their excellent biological compatibility, superior mechanical strength, and high corrosion resistance. The hypothesis of this present study was to manufacture the Zn-doped TiO2 layer possessing the biocompatibility and antibacterial ability on the surface of Ti specimens. TiO2, ZnO, and Ti(Zn)O2 coatings were deposited on polished pure Ti substrates using a cathodic arc deposition system. Murine osteoblasts (MC3T3-E1) and human Staphylococcus aureus (S. aureus) were cultured onto the surface with different deposited coatings, respectively. The biocompatibility was examined by cell viability and osteogenic gene expression. The antibacterial ability was determined by SYTO9 nucleic acid staining. A porous Zn-doped TiO2 coating was successfully produced. The ZnO exhibited a fibrous structure with nanorods showing a hydrophobic feature (contact angle approximately 89°). These material properties affected the following biological performance. The antibacterial testing found no apparent difference between the uncoated Ti plate and the TiO2 coating. However, significantly lower numbers of S. aureus were observed on ZnO and Ti(Zn)O2 coatings compared to that on the uncoated Ti. The biocompatible testing exhibited that TiO2 and Ti(Zn)O2 coatings enhanced greater cell viability and proliferation than the uncoated Ti plate and ZnO coating. The osteogenic gene expression of Dlx-5 and osterix also improved for the TiO2 and Ti(Zn)O2 coatings. However, a significant inhibition of cell viability was found for the ZnO coating. These findings suggested that the composite Ti(Zn)O2 coating with a lower content of Zn (7.6±1.3at.%) not only improved antibacterial activity, but also maintained the biocompatibility to bone cells. [Copyright &y& Elsevier]