Search

Moderate severity disturbances, those that do not result in stand replacement, play an essential role in ecosystem dynamics. Despite the prevalence of moderate severity disturbances and the significant impacts they impose on forest functioning, little is known about their effects on forest canopy structure and how these effects differ over time across a range of disturbance severities and disturbance types.Using longitudinal data from the National Ecological Observatory Network project, we assessed the effects of three moderate severity press disturbances (beech bark disease, hemlock woolly adelgid and emerald ash borer, which are characterized by continuous disturbance and sustained mortality) and three moderate severity pulse disturbances (spring cankerworm moth, spongy moth and ground fire, which are associated with discrete and relatively short mortalities) on temperate forest canopy structure in eastern US. We studied (1) how light detection and ranging (LiDAR)‐derived metrics of canopy structure change in response to disturbance and (2) whether initial canopy complexity offsets impact of disturbances on canopy structure over time. We used a mixed‐effects modelling framework which included a non‐linear term for time to represent changes in canopy structure caused by disturbance, and interactions between time and both disturbance intensity and initial canopy complexity.We discovered that high intensity of both press and pulse disturbances inhibited canopy height growth while low intensity pulse disturbances facilitated it. In addition, high intensity pulse disturbances facilitated increases in the complexity of the canopy over time. Concerning the impact of initial canopy complexity, we found that the initial canopy complexity of disturbed plots altered the effects of moderate disturbances, indicating potential resilience effects.Synthesis. This study used repeated measurements of LiDAR data to examine the effects of moderate disturbances on various dimensions of forest canopy structure, including height, openness, density and complexity. Our study indicates that both press and pulse disturbances can inhibit canopy height growth over time. However, while the impact of press disturbances on other dimensions of canopy structure could not be clearly detected, likely because of compensatory growth, the impact of pulse disturbances over time was more readily apparent using multi‐temporal LiDAR data. Furthermore, our findings suggest that canopy complexity might help to mitigate the impact of moderate disturbances on canopy structures over time. Overall, our research highlights the usefulness of multi‐temporal LiDAR data for assessing the structural changes in forest canopies caused by moderate severity disturbances. [ABSTRACT FROM AUTHOR]

The measurement of forest structure has evolved steadily due to advances in technology, methodology, and theory. Such advances have greatly increased our capacity to describe key forest structural elements and resulted in a range of measurement approaches from traditional analog tools such as measurement tapes to highly derived and computationally intensive methods such as advanced remote sensing tools (e.g., lidar, radar). This assortment of measurement approaches results in structural metrics unique to each method, with the caveat that metrics may be biased or constrained by the measurement approach taken. While forest structural diversity (FSD) metrics foster novel research opportunities, understanding how they are measured or derived, limitations of the measurement approach taken, as well as their biological interpretation is crucial for proper application. We review the measurement of forest structure and structural diversity—an umbrella term that includes quantification of the distribution of functional and biotic components of forests. We consider how and where these approaches can be used, the role of technology in measuring structure, how measurement impacts extend beyond research, and current limitations and potential opportunities for future research. [ABSTRACT FROM AUTHOR]

Airborne Laser Scanners (ALS) and Terrestrial Laser Scanners (TLS) are two lidar systems frequently used for remote sensing forested ecosystems. The aim of this study was to compare crown metrics derived from TLS, ALS, and a combination of both for describing the crown structure and fuel attributes of longleaf pine (Pinus palustris Mill.) dominated forest located at Eglin Air Force Base (AFB), Florida, USA. The study landscape was characterized by an ALS and TLS data collection along with field measurements within three large (1963 m2 each) plots in total, each one representing a distinct stand condition at Eglin AFB. Tree-level measurements included bole diameter at breast height (DBH), total height (HT), crown base height (CBH), and crown width (CW). In addition, the crown structure and fuel metrics foliage biomass (FB), stem branches biomass (SB), crown biomass (CB), and crown bulk density (CBD) were calculated using allometric equations. Canopy Height Models (CHM) were created from ALS and TLS point clouds separately and by combining them (ALS + TLS). Individual trees were extracted, and crown-level metrics were computed from the three lidar-derived datasets and used to train random forest (RF) models. The results of the individual tree detection showed successful estimation of tree count from all lidar-derived datasets, with marginal errors ranging from −4 to 3%. For all three lidar-derived datasets, the RF models accurately predicted all tree-level attributes. Overall, we found strong positive correlations between model predictions and observed values (R2 between 0.80 and 0.98), low to moderate errors (RMSE% between 4.56 and 50.99%), and low biases (between 0.03% and −2.86%). The highest R2 using ALS data was achieved predicting CBH (R2 = 0.98), while for TLS and ALS + TLS, the highest R2 was observed predicting HT, CW, and CBD (R2 = 0.94) and HT (R2 = 0.98), respectively. Relative RMSE was lowest for HT using three lidar datasets (ALS = 4.83%, TLS = 7.22%, and ALS + TLS = 4.56%). All models and datasets had similar accuracies in terms of bias (<2.0%), except for CB in ALS (−2.53%) and ALS + TLS (−2.86%), and SB in ALS + TLS data (−2.22%). These results demonstrate the usefulness of all three lidar-related methodologies and lidar modeling overall, along with lidar applicability in the estimation of crown structure and fuel attributes of longleaf pine forest ecosystems. Given that TLS measurements are less practical and more expensive, our comparison suggests that ALS measurements are still reasonable for many applications, and its usefulness is justified. This novel tree-level analysis and its respective results contribute to lidar-based planning of forest structure and fuel management. [ABSTRACT FROM AUTHOR]

Lidar‐derived forest structural diversity (FSD) metrics—including measures of forest canopy height, vegetation arrangement, canopy cover (CC), structural complexity and leaf area and density—are increasingly used to describe forest structural characteristics and can be used to infer many ecosystem functions. Despite broad adoption, the importance of spatial resolution (grain and extent) over which these structural metrics are calculated remains largely unconsidered. Often researchers will quantify FSD at the spatial grain size of the process of interest without considering the scale dependency or statistical behaviour of the FSD metric employed.We investigated the appropriate scale of inference for eight lidar‐derived spatial metrics—CC, canopy relief ratio, foliar height diversity, leaf area index, mean and median canopy height, mean outer canopy height, and rugosity (RT)‐‐representing five FSD categories—canopy arrangement, CC, canopy height, leaf area and density, and canopy complexity. Optimal scale was determined using the representative elementary area (REA) concept whereby the REA is the smallest grain size representative of the extent. Structural metrics were calculated at increasing canopy spatial grain (from 5 to 1000 m) from aerial lidar data collected at nine different forested ecosystems including sub‐boreal, broadleaf temperate, needleleaf temperate, dry tropical, woodland and savanna systems, all sites are part of the National Ecological Observatory Network within the conterminous United States. To identify the REA of each FSD metric, we used changepoint analysis via segmented or piecewise regression which identifies significant changepoints for both the magnitude and variance of each metric.We find that using a spatial grain size between 25 and 75 m sufficiently captures the REA of CC, canopy arrangement, canopy leaf area and canopy complexity metrics across multiple forest types and a grain size of 30–150 m captures the REA of canopy height metrics. However, differences were evident among forest types with higher REA necessary to characterize CC in evergreen needleleaf forests, and canopy height in deciduous broadleaved forests.These findings indicate the appropriate range of spatial grain sizes from which inferences can be drawn from this set of FSD metrics, informing the use of lidar‐derived structural metrics for research and management applications. [ABSTRACT FROM AUTHOR]

Individual tree detection (ITD) and crown delineation are two of the most relevant methods for extracting detailed and reliable forest information from LiDAR (Light Detection and Ranging) datasets. However, advanced computational skills and specialized knowledge have been normally required to extract forest information from LiDAR.The development of accessible tools for 3D forest characterization can facilitate rapid assessment by stakeholders lacking a remote sensing background, thus fostering the practical use of LiDAR datasets in forest ecology and conservation. This paper introduces the treetop application, an open‐source web‐based and R package LiDAR analysis tool for extracting forest structural information at the tree level, including cutting‐edge analyses of properties related to forest ecology and management.We provide case studies of how treetop can be used for different ecological applications, within various forest ecosystems. Specifically, treetop was employed to assess post‐hurricane disturbance in natural temperate forests, forest homogeneity in industrial forest plantations and the spatial distribution of individual trees in a tropical forest.treetop simplifies the extraction of relevant forest information for forest ecologists and conservationists who may use the tool to easily visualize tree positions and sizes, conduct complex analyses and download results including individual tree lists and figures summarizing forest structural properties. Through this open‐source approach, treetop can foster the practical use of LiDAR data among forest conservation and management stakeholders and help ecological researchers to further understand the relationships between forest structure and function. [ABSTRACT FROM AUTHOR]

During the 21st century, human–environment interactions will increasingly expose both systems to risks, but also yield opportunities for improvement as we gain insight into these complex, coupled systems. Human–environment interactions operate over multiple spatial and temporal scales, requiring large data volumes of multi‐resolution information for analysis. Climate change, land‐use change, urbanization, and wildfires, for example, can affect regions differently depending on ecological and socioeconomic structures. The relative scarcity of data on both humans and natural systems at the relevant extent can be prohibitive when pursuing inquiries into these complex relationships. We explore the value of multitemporal, high‐density, and high‐resolution LiDAR, imaging spectroscopy, and digital camera data from the National Ecological Observatory Network's Airborne Observation Platform (NEON AOP) for Socio‐Environmental Systems (SES) research. In addition to providing an overview of NEON AOP datasets and outlining specific applications for addressing SES questions, we highlight current challenges and provide recommendations for the SES research community to improve and expand its use of this platform for SES research. The coordinated, nationwide AOP remote sensing data, collected annually over the next 30 yr, offer exciting opportunities for cross‐site analyses and comparison, upscaling metrics derived from LiDAR and hyperspectral datasets across larger spatial extents, and addressing questions across diverse scales. Integrating AOP data with other SES datasets will allow researchers to investigate complex systems and provide urgently needed policy recommendations for socio‐environmental challenges. We urge the SES research community to further explore questions and theories in social and economic disciplines that might leverage NEON AOP data. [ABSTRACT FROM AUTHOR]

Vegetation structural complexity and biodiversity tend to be positively correlated, but understanding of this relationship is limited in part by structural metrics tending to quantify only horizontal or vertical variation, and that do not reflect internal structure. We developed new metrics for quantifying internal vegetation structural complexity using terrestrial LiDAR scanning and applied them to 12 NEON forest plots across an elevational gradient in Great Smoky Mountains National Park, USA. We asked (1) How do our newly developed structure metrics compare to traditional metrics? (2) How does forest structure vary with elevation in a high‐biodiversity, high topographic complexity region? (3) How do forest structural metrics vary in the strength of their relationships with vascular plant biodiversity? Our new measures of canopy density (Depth) and structural complexity (σDepth), and their canopy height‐normalized counterparts, were sensitive to structural variations and effectively summarized horizontal and vertical dimensions of structural complexity. Forest structure varied widely across plots spanning the elevational range of GRSM, with taller, more structurally complex forests at lower elevation. Vascular plant biodiversity was negatively correlated with elevation and more strongly positively correlated with vegetation structure variables. The strong correlations we observed between canopy structural complexity and biodiversity suggest that structural complexity metrics could be used to assay plant biodiversity over large areas in concert with airborne and spaceborne platforms. [ABSTRACT FROM AUTHOR]

Aim: Canopy structural complexity, which describes the degree of heterogeneity in vegetation density, is strongly tied to a number of ecosystem functions, but the community and structural characteristics that give rise to variation in complexity at site to subcontinental scales are poorly defined. We investigated how woody plant taxonomic and phylogenetic diversity, maximum canopy height, and leaf area index (LAI) relate to canopy rugosity, a measure of canopy structural complexity that is correlated with primary production, light capture, and resource‐use efficiency. Location: Our analysis used 122 plots distributed across 10 ecologically and climatically variable forests spanning a > 1,500 km latitudinal gradient within the National Ecological Observatory Network (NEON) of the USA. Time period: 2016–2018. Taxa studied: Woody plants. Methods: We used univariate and multivariate modelling to examine relationships between canopy rugosity, and community and structural characteristics hypothesized to drive site and subcontinental variation in complexity. Results: Spatial variation in canopy rugosity within sites and across the subcontinent was strongly and positively related to maximum canopy height (r2 =.87 subcontinent‐wide), with the addition of species richness in a multivariate model resolving another 2% of the variation across the subcontinent. Individually, woody plant species richness and phylogenetic diversity (r2 =.17 to.44, respectively) and LAI (r2 =.16) were weakly to moderately correlated with canopy rugosity at the subcontinental scale, and inconsistently explained spatial variation in canopy rugosity within sites. Main conclusions: We conclude that maximum canopy height is a substantially stronger predictor of complexity than diversity or LAI within and across forests of eastern North America, suggesting that canopy volume places a primary constraint on the development of structural complexity. Management and land‐use practices that encourage and sustain tall temperate forest canopies may support greater complexity and associated increases in ecosystem functioning. [ABSTRACT FROM AUTHOR]

The study of vegetation community and structural change has been central to ecology for over acentury, yet the ways in which disturbances reshape the physical structure of forest canopies remain relatively unknown. Moderate severity disturbances affect different canopy strata and plant species, resulting in variable structural outcomes and ecological consequences. Terrestrial lidar (light detection and ranging) offers an unprecedented view of the interior arrangement and distribution of canopy elements, permitting the derivation of multidimensional measures of canopy structure that describe several canopy structural traits (CSTs)with known links to ecosystem function. We used lidar-derived CSTs within a machine learning framework to detect and describe the structural changes that result from various disturbance agents, including moderate severity fire, ice storm damage, age-related senescence, hemlock woolly adelgid, beech bark disease, and chronic acidification. We found that fire and ice storms primarily affected the amount and position of vegetation within canopies, while acidification, senescence, pathogen, and insect infestation altered canopy arrangement and complexity. Only two of the six disturbance agents significantly reduced leaf area, counter to common assumptions regarding many moderate severity disturbances. While findings are limited in their generalizability due to lack of replication among disturbances, they do suggest that the current limitations of standard disturbance detection methods—such as optical-based remote sensing platforms, which are often above-canopy perspectives—limit our ability to understand the full ecological and structural impacts of disturbance, and to evaluate the consistency of structural patterns within and among disturbance agents. A more broadly inclusive definition of ecological disturbance that incorporates multiple aspects of canopy structural change may potentially improve the modeling, detection, and prediction of functional implications of moderate severity disturbance as well as broaden our understanding of the ecological impacts of disturbance. [ABSTRACT FROM AUTHOR]

Vegetation canopy structure is a fundamental characteristic of terrestrial ecosystems that defines vegetation types and drives ecosystem functioning. We use the multivariate structural trait composition of vegetation canopies to classify ecosystems within a global canopy structure spectrum. Across the temperate forest sub‐set of this spectrum, we assess gradients in canopy structural traits, characterise canopy structural types (CST) and evaluate drivers and functional consequences of canopy structural variation. We derive CSTs from multivariate canopy structure data, illustrating variation along three primary structural axes and resolution into six largely distinct and functionally relevant CSTs. Our results illustrate that within‐ecosystem successional processes and disturbance legacies can produce variation in canopy structure similar to that associated with sub‐continental variation in forest types and eco‐climatic zones. The potential to classify ecosystems into CSTs based on suites of structural traits represents an important advance in understanding and modelling structure–function relationships in vegetated ecosystems. [ABSTRACT FROM AUTHOR]

Highlights • Landsat greenness and brightness were correlated with canopy structure complexity. • NDVI could estimate six metrics of structural complexity from terrestrial LiDAR. • This improves the spatial understanding of 3D forest structure in Landsat metrics. • Coupling LiDAR and Landsat could lead to improved ecosystem function predictions. Abstract Vegetation metrics derived from satellite imagery provide continuous and large spatial-scale measurements that are critical for interpreting and predicting ecosystem function. However, uncertainty still remains as to the precise structural information that could be estimated from these metrics. Landsat-derived metrics provide pixel measurements of vegetation across the landscape, whereas Light Detection and Ranging (LiDAR) provides multidimensional data on the vertical arrangement of forests. Terrestrial LiDAR metrics of structural complexity describe the arrangement of vegetation in the canopy, and could be coupled with Landsat-derived metrics through their influence on energy and light. Linking Landsat to terrestrial LiDAR estimates of canopy structure could expand the interpretation of Landsat-derived metrics and broaden the spatial scale at which structural complexity can be evaluated. Here, we examined associations between Landsat-derived metrics and terrestrial LiDAR measurements of structural complexity. Structural complexity measurements were obtained with terrestrial LiDAR from plots within eight forested NEON sites across eastern North America. Vegetation metrics (NDVI, EVI, tasseled cap metrics) were calculated for corresponding locations from Landsat 8 satellite imagery. Results showed that canopy reflectance, greenness and brightness, were linked with several measures of canopy structure. Higher levels of greenness were associated with stands having a taller canopy, greater leaf area density and variability, and a less open and porous canopy. Among greenness metrics, NDVI was most strongly correlated with structural complexity metrics (adj. R2 = 0.52 – 0.62 for six metrics). Additionally, we found that a brighter canopy was associated with greater leaf area density and variability, canopy cover, porosity, and lower leaf clumping. Our results demonstrated the potential for large-spatial extent estimates of structural complexity using satellite imagery, and may lead to improved predictions of forest ecosystem functioning such as those predicted in “big leaf” ecosystem models. [ABSTRACT FROM AUTHOR]

Since biodiversity often increases ecosystem functioning, changes in tree species diversity could substantially influence terrestrial carbon cycling. Yet much less is known about the relationships between forest structural diversity (i.e., the number and physical arrangement of vegetation elements in a forest) and carbon cycling, and the factors that mediate these relationships. We capitalize on spaceborne lidar data from NASA's Global Ecosystem Dynamics Investigation (GEDI) and on-the-ground forest inventory and analysis (FIA) data from 1796 plots across the contiguous United States to assess relationships among the structural and species diversity of live trees and aboveground carbon storage. We found that carbon storage was more strongly correlated with structural diversity than with species diversity, for both forest inventory-based metrics of structural diversity (e.g., height and DBH diversity) and GEDI-based canopy metrics (i.e., foliage height diversity (FHD)). However, the strength of diversity‑carbon storage relationships was mediated by forest origin and forest types. For both plot-based and GEDI-based metrics, the relationship between structural diversity (i.e., height diversity, DBH diversity, and FHD) and carbon storage was positive in natural forests for all forest types (broadleaf, mixed, conifer). For planted forests, structural diversity showed positive relationships in planted conifer forests but not in planted mixed forests. Species diversity did not show strong associations with carbon storage in natural forests but showed a positive relationship in mixed coniferous-broadleaf planted forests. Although plot-based structural diversity metrics refine our understanding of drivers of forest carbon balances at the plot scale, remotely sensed metrics such as those from GEDI can help extend that understanding to regional/national scales in a spatially continuous manner. Carbon storage showed stronger associations with plot-based structural diversity than with stand age, soil variables, or climate variables. Incorporating structural diversity into management and restoration strategies could help guide efforts to increase carbon storage and mitigate climate change as nature-based solutions. • Structural explained carbon storage better than did species diversity. • Structural diversity outperformed stand age, soil, and climate variables. • Influences of diversity on carbon storage vary across natural and planted forests. • Plot-based structural diversity showed stronger correlations than GEDI-based metrics. • GEDI-based metrics of forest structure will help enable large scale carbon mapping. [ABSTRACT FROM AUTHOR]

• Structural and composition change following stem-girdling varied by disturbance severity. • Removal of large trees affected soil temperature, soil water content, and canopy light absorption. • Removal of small to medium trees primarily affected only soil temperature. Forest structural diversity and community composition are key in regulating forest microclimates. When disturbance affects structural diversity or composition, forest microclimates may be altered due to changes in soil temperature, soil water content, and light availability. It is unclear however which structural or compositional components, when changed or to what extent, result in microclimatic change. To address this question, we used data from a large scale, manipulative stem-girdling experiment in northern, lower Michigan—the Forest Resilience and Threshold Experiment (FoRTE). FoRTE follows a factorial design with multiple levels of disturbance severity (0, 45, 65, 85%) based on targeted reductions in gross leaf area index via stem-girdling induced mortality. These disturbance severity treatments are applied in two ways: either as top-down (largest trees are killed) or bottom-up (small to medium trees killed) treatments. We examined how multiple components of structural diversity and community composition changed as a product of disturbance severity and type, and then tested for resulting effects on forest microclimates (light availability, soil temperature, and soil water), using a multivariate, Random Forest framework. We found that measures of community composition (species richness, species evenness, and Shannon-Wiener Diversity Index) and stand structure (basal area, standard deviation of DBH, tree size diversity) declined more following disturbance than did measures of canopy cover, heterogeneity, arrangement, or height. However, when changes in each variable from pre- to post-disturbance, measured as log change, were employed in a multivariate, Random Forest regression framework, structural diversity measures of heterogeneity (rugosity, top rugosity), cover (canopy cover), and arrangement (porosity) were the most influential variables, but with differences among bottom-up and top-down treatments We found that the death of large trees from disturbance impacts soil temperature, water, and light environments more substantially and uniformly across disturbance gradients than does the death of smaller trees. Our results have implications for both statistical and process-based modeling of forest disturbance. [ABSTRACT FROM AUTHOR]

Abstract: Terrestrial LiDAR (light detection and ranging) technologies have created new means of quantifying forest canopy structure, allowing not only the estimation of biomass, but also descriptions of the position and variability in canopy elements in space. Such measures provide novel structural information broadly useful to ecologists. There is a growing need for both a detailed taxonomy of forest canopy structural complexity (CSC) and open, transparent, and flexible tools to quantify complexity in ways that will advance foundational ecological knowledge of structure‐function relationships. The CSC taxonomy we present groups structural descriptors into five categories: leaf area and density, canopy height, canopy arrangement, canopy openness, and canopy variability. This paper also introduces the r package forestr, the first open‐source r package for the calculation of CSC metrics from terrestrial LiDAR data. The r package forestr is an analysis toolbox that works with portable canopy LiDAR (PCL) data and other pixelated/voxelized point clouds derived from terrestrial LiDAR scanning (TLS) data to calculate CSC metrics of interest to ecologists, modellers, forest managers, and remote sensing scientists. [ABSTRACT FROM AUTHOR]

• Remotely sensed data on forest structure are critical for wildlife conservation. • Light Detection and Ranging (LiDAR) holds promise for predicting wildlife habitat. • LiDAR predicted occupancy for Golden-winged Warblers better than field data. • LiDAR data can describe the distribution of habitat for forest-dependent wildlife. Remotely-sensed data can inform conservation efforts that target forest wildlife, however, few spatial data products are able to quantify fine-scale aspects of structural variation within forests. Increased availability of Light Detection and Ranging (LiDAR) datasets that cover broad spatial extents and ownership types (e.g., entire states) provide useful information regarding canopy and understory structure within forested landscapes. The fusion of LiDAR data with field-based species surveys can advance our understanding of species-habitat relationships and improve the effectiveness of conservation programs to recover habitat-limited species. The Golden-winged Warbler (Vermivora chrysoptera) is a forest-dependent songbird that nests in structurally-complex young forest across eastern North America. As with many early-successional obligates, this species has been declining for decades due, in part, to the steady loss of young forest/shrubland nesting habitat. Although conservation programs have begun restoring Golden-winged Warbler habitat, these efforts are currently limited by the inability to identify existing habitat across large spatial extents and diverse ownership patterns. Recent availability of state-wide LiDAR data for Pennsylvania provides an opportunity to overcome this limitation. From 2019 to 20, we surveyed for Golden-winged Warblers and structural vegetation at 837 sites across six forest blocks in eastern Pennsylvania. We combined these data with LiDAR derived forest structural metrics to develop statistical models to predict patterns of occupancy. Golden-winged Warbler occupancy probability was explained by models containing several LiDAR-derived structural metrics (e.g., percentage of first returns between 1 and 5 m in height, structural complexity, etc.). Moreover, models fit with LiDAR-derived covariates predicted occupancy much better than those using only field-measured vegetation covariates (ΔAIC c = 53.27). Mapped predictions of Golden-winged Warbler occupancy revealed potential habitat (especially regenerating timber harvests) on both private and public lands. These results demonstrate the efficacy of LiDAR for modeling forest bird habitat associations, and how such data sources can provide a valuable tool for conservation planning. [ABSTRACT FROM AUTHOR]

• Honeysuckle removal caused immediate declines in canopy leaf area and changes in spatial leaf distribution that resulted in increased canopy structural complexity that continued to accrue more than a decade after removal. • The long-term structural changes were dependent on initial site conditions prior to disturbance, whereby increased structural complexity only occurred in areas with initially large honeysuckle abundance and low native tree density. • Visual assessments of honeysuckle cover may be used to rapidly quantify areas that would benefit most from honeysuckle removal due to the strong correlation with native tree canopy structure, while honeysuckle stem count and basal area are poor candidates, due to a lack of correlation with canopy structural metrics and the time consuming and labor-intensive nature of collecting this data. • In application, our results suggest that honeysuckle removal has the potential to increase the long-term canopy structural complexity and increase understory openness; but initial stand conditions should be considered during forest management aimed at restoring structural complexity of forests. Riparian forests across the continental United States are heavily invaded by Amur honeysuckle (Lonicera maackii (Rupr.)), an invasive shrub which suppresses native plants, homogenizes community structure and composition, and alters ecosystem processes. However, no studies have quantified the impacts of honeysuckle removal on forest canopy structure across the first decade of restoration. In this study we used a portable canopy LiDAR (PCL) to characterize the immediate (<1 year), short-term (1–2 years) and long-term (>10 years) impacts of honeysuckle removal on the horizontal and vertical complexity of canopy structure in 5 heavily invaded riparian forests in Ohio. Within two years of removal, forest canopies had a 40% reduction in canopy leaf volume, a greater average height of maximum canopy density, and increased aggregation of the remaining leaf area around trees than pre-removal conditions. Honeysuckle removal also prompted long-term (>10 years) increases in canopy structural complexity, but only in areas with initially high honeysuckle abundance and low native tree density. Honeysuckle cover had a much stronger influence on canopy structure than either its basal area or stem density. Our results suggest that removing honeysuckle from heavily-invaded stands can promote complex canopy structure over the long-term that is beyond the short-term accrual immediately following disturbance, but might depend on initial stand conditions. [ABSTRACT FROM AUTHOR]

This article is a Commentary on Smith et al., 222: 1284–1297. [ABSTRACT FROM AUTHOR]

Structural diversity is a key feature of forest ecosystems that influences ecosystem functions from local to macroscales. The ability to measure structural diversity in forests with varying ecological composition and management history can improve the understanding of linkages between forest structure and ecosystem functioning. Terrestrial LiDAR has often been used to provide a detailed characterization of structural diversity at local scales, but it is largely unknown whether these same structural features are detectable using aerial LiDAR data that are available across larger spatial scales. We used univariate and multivariate analyses to quantify cross-compatibility of structural diversity metrics from terrestrial versus aerial LiDAR in seven National Ecological Observatory Network sites across the eastern USA. We found strong univariate agreement between terrestrial and aerial LiDAR metrics of canopy height, openness, internal heterogeneity, and leaf area, but found marginal agreement between metrics that described heterogeneity of the outermost layer of the canopy. Terrestrial and aerial LiDAR both demonstrated the ability to distinguish forest sites from structural diversity metrics in multivariate space, but terrestrial LiDAR was able to resolve finer-scale detail within sites. Our findings indicated that aerial LiDAR could be of use in quantifying broad-scale variation in structural diversity across macroscales. [ABSTRACT FROM AUTHOR]