Search

The industrial sector is one of the biggest oil consumers in Cyprus, corresponding to 20% of the fuel consumption. A parabolic trough collector (PTC) system seems the best option to produce clean thermal energy at higher temperatures than those that can be achieved from the already widely used flat plate collectors on the island. This paper presents a simulation model built to investigate the performance of the first industrial PTC system in Cyprus, installed at the Cyprus biggest soft drinks factory. The simulation model is built in TRNSYS and is validated using data from the real PTC system installed at the factory. The results show a very good fitting between the operating parameters and the power output of the Solar Field (SF), Concrete Thermal Storage System (CTES), and the Steam Generator (SG). The average percentage relative error of the system's contribution to the process is less than 6.32% for the daily steam production and during a week did not exceed 6.45%. The novelty of this study is the development of a design tool that can be used by potential interested industries to identify the suitable system that fits their needs. All data are provided in the form of graphs and allow anyone to use as input data the thermal energy demand and required steam temperature of the industry to retrieve information about the size of a suitable system which satisfies these requirements depending on each case. The payback period for all cases examined varies from 2 to 6 years, depending on the size of the system. • Validated dynamic simulation model of a PTC system working under various operation modes for Industrial Process Heat application. • Evaluation of the operation modes and strategies developed to make the PTC system dispatchable. • A scaled up model for of the validated dynamic simulation model. • Development of a tool for potential interested industries in Cyprus for PTC systems. [ABSTRACT FROM AUTHOR]

Thermal energy storage system in concentrating solar power plants can guarantee sustainable and stable electricity output in case of highly unstable solar irradiation conditions. In this paper, the lumped parameter method is used to develop the models of different thermal energy storage systems. In order to improve the reliability as well as the prediction accuracy of developed models, the charging/discharging process is firstly simulated, and then the dynamic characteristics of thermal energy storage systems are fully tested by imposing 15% step disturbance of mass flow. The results show that the charging/discharging characteristics of the three different thermal energy storage systems are almost the same, which have little to do with the storage mediums used in the systems. Besides, for the representative 1MWe solar parabolic trough power plant, a 15% step up disturbance of oil mass flow will result in a small increase (1.8% and 1.3% respectively) on the outlet temperature of oil and molten salt. On the other side, a 15% step down disturbance of oil mass flow will lead a 2.7% and 2.2% decrease on the outlet temperature of oil and molten salt respectively. In order to verify the validity of the proposed models, the simulation results are compared with both the design points and representative experimental data from the 1MWe solar parabolic trough power plant. The results show that the maximum relative error is not more than 1% when comparing with the design points and the maximum relative error is not more than 12% when comparing with the representative experimental data. Conclusions of this paper are good references for system design, control and commissioning of concentrating solar power plants. • Thermal energy storage can provide sustainable and stable electricity output. • Lumped parameter method is used to build the model of thermal energy storage. • The dynamic characteristics are tested by a 15% step disturbance of mass flow. • A 15% step-up will result in a 1.3% increase in molten salt outlet temperature. • A 15% step down will result in a 2.2% decrease in molten salt outlet temperature. [ABSTRACT FROM AUTHOR]

The addition of thermal energy storage and natural gas as a complementary energy source improves the flexibility, reliability, and value of concentrated solar power (CSP) plants. Nevertheless, due to the transient nature of solar energy, transitions from solar-only mode and natural-gas mode to hybrid solar-natural gas mode is quite challenging, especially when the plant is equipped with thermal storage. Thus, it is important to develop proper dynamic modeling and control schemes to accurately simulate such transitions. The objective of this study is to address this subject by demonstrating a dynamic model with reliable control schemes for a highly integrated hybrid parabolic trough-natural gas plant equipped with thermal energy storage. The specific goal is to study the dynamics of adding thermal storage to the hybrid plant. It is found that the developed control schemes assist smooth transitions between different operational modes and effective utilization of thermal storage and natural gas to maintain steady power production and steam mass flow rates under different solar conditions. The results demonstrate that the integration of storage regulates power production by solar energy and natural gas during the day time. It also enables an increase in the solar fraction of the hybrid plant while it causes a small decrease in thermodynamic efficiency. The analysis shows that the hybrid plant with the storage has a substantially lower specific CO 2 emission (0.320 tonne/MWh) than single natural gas plant (0.413 tonne/MWh) although it has a higher levelized cost of electricity ($86.32/MWh against $74.92/MWh). The hybrid plant with storage demonstrates a promising potential for reliable and clean production of electricity, although research and development should be conducted to lower its cost. • A hybrid parabolic trough-natural gas plant with thermal storage is simulated. • A detailed dynamic model with reliable control schemes is developed. • The control schemes assist smooth transitions between different operational modes. • Thermal storage regulates power produced by solar and natural gas throughout days. • The hybrid plant shows promising potential for flexible and clean power production. [ABSTRACT FROM AUTHOR]