Search

Oil-immersed paper is a weak link in internal insulation of oil immersed power transformer, whose aging state distributes inhomogeneously. However, most of the current assessment methods fail to consider the spatial distribution of aging areas inside transformer. Aiming at this problem, this paper proposes the inversion detection method to obtain the resistivity of oil-immersed paper in various regions nondestructively, and uses the resistivity of oil-immersed paper to assess directly the insulation state of oil immersed power transformers. Finite element method is applied to establish the mapping relationship between the resistivity of oil-immersed paper in different regions, and the dielectric loss factor obtained from the port of transformer. Back propagation neural network is used to learn inversely this mapping relationship so as to calculate the resistivity. Applying the proposed method on a 10-kV transformer, the calculated results are close to the measured values. The study shows that the inversion method can effectively calculate the oil-immersed resistivity in various regions, which represent the aging state in different regions of the transformer. [ABSTRACT FROM AUTHOR]

Oil-paper insulation ageing of transformer has characteristics of spatial locality due to uneven temperature distribution. The transformer is sealed, it is difficult to obtain the local ageing state of oil-paper insulation by sampling directly. Currently, there are no effective detection method to detect the insulation state of local regions. The oil-immersed paper resistivity inversion method can nondestructively assess the local state of oil-paper insulation. However, the current inversion methods still have shortcomings and need to be improved. In this paper, combining the back propagation neural network (BPNN) and Newton downhill method (NDM), an improved inversion method is proposed to optimize the current inversion method, so as to reduce the effect of initial value on it and make calculated results converge better. Finally, a 3D 10 kV transformer model is established to verify the effectiveness of the proposed method. The resistivity calculated by the improved method show that the method can provide initial resistivity values for technicians and improve the convergence and accuracy of current inversion method, which is more suitable for extending to the engineering practice. [ABSTRACT FROM AUTHOR]

• This study improved the citation prediction accuracy by applying the BP neural network. • The BP neural network significantly outperformed the other six baselines (XGBoost, RF, LR, SVR, KNN, and RNN). • Five essential features were determined for citation prediction. Predicting the citation counts of academic papers is of considerable significance to scientific evaluation. This study used a four-layer Back Propagation (BP) neural network model to predict the five-year citations of 49,834 papers in the library, information and documentation field indexed by the CSSCI database and published from 2000 to 2013. We extracted six paper features, two journal features, nine author features, eight reference features, and five early citation features to make the prediction. The empirical experiments showed that the performance of the BP neural network is significantly better than those of the six baseline models. In terms of the prediction effect, the accuracy of the model at predicting infrequently cited papers was higher than that for frequently cited ones. We determined that five essential features have significant effects on the prediction performance of the model, i.e., 'citations in the first two years', 'first-cited age', 'paper length', 'month of publication', and 'self-citations of journals', and the other features contribute only slightly to the prediction. [ABSTRACT FROM AUTHOR]

Intelligent systems on Paper currency recognition and verification are inevitable for modern banking services. These systems are used in Auto-seller machines, vending machines etc. Extracting sufficient and reliable monetary characteristics are essential for accuracy and performance of such systems. This paper proposes a new intelligent system for paper currency recognition. Pakistani paper currency has been considered, as a case study, for intelligent recognition. This paper identifies, introduces, and extracts robust features from Pakistani banknotes. After extracting these features, the paper proposes to use three layers feed-forward Backpropagation Neural Network (BPN) for intelligent classification. The proposed technique and system are simple and comparatively less time consuming which makes it suitable for real-time applications. In order to evaluate the performance of the proposed technique, experiments have been conducted on 175 Pakistani banknotes. The results indicate that system has 100% recognition ability on properly captured images. [ABSTRACT FROM AUTHOR]

With the rapid development of social economy, the demand for electric power engineering is gradually increasing. The power supply system is constantly developing in the direction of large space and automation, and various high and new technologies are also constantly improving. The power monitoring data access control system is used to monitor and control the power production and supply process and improve the power supply efficiency. The further development of the region also has a higher demand for power and energy supply. For the problem that the natural environment of transmission and distribution lines in various power grids is uncertain, which makes the line operation unsafe. This paper proposed a power monitoring data access control system based on BP (back propagation, abbreviated as BP) neural network. This paper described the related concepts of BP neural network and power monitoring system, and described the functions and construction methods of power monitoring data access control system. On this basis, relevant experiments were carried out to verify the performance of the proposed system. The experimental results showed that the fault detection accuracy of the traditional algorithm was about 93 %, while the fault detection accuracy of the algorithm in this paper was more than 98 %. The highest accuracy rate was 99.88 %, and the accuracy rate of fault detection was greatly improved. [ABSTRACT FROM AUTHOR]

The performance improvement of CMOS computer fails to meet the enormous data processing requirement of artificial intelligence progressively. The memristive neural network is one of the most promising circuit hardwares to make a breakthrough. This paper proposes a novel memristive synaptic circuit that is composed of four MOS transistors and one memristor (4T1M). The 4T1M synaptic circuit provides flexible control strategies to change memristance or respond to the input signal. Applying the 4T1M synaptic circuit as the cell of memristive crossbar array, based on the structure and algorithm of the back-propagation (BP) neural network, this paper proposes circuit design of the memristive crossbar-based BP neural network. By reusing the 4T1M memristive crossbar array, the computations in the forward-propagation process and back-propagation process of BP neural network are accomplished on the memristive crossbar-based circuit to accelerate the computing speed. The 4T1M memristive crossbar array can change all the cells' memristance at a time, accordingly, the memristive crossbar-based BP neural network can realize synchronous memristance adjustment. The proposed memristive crossbar-based BP neural network is then evaluated through experiments involving XOR logic operation, iris classification, and MNIST handwritten digit recognition. The experimental results present fewer iterations or higher classification accuracies. Further, the comprehensive comparisons with the existing memristive BP neural networks highlight the advantages of the proposed memristive crossbar-based BP neural network, which achieves the fastest memristance adjustment speed using relatively few components. [ABSTRACT FROM AUTHOR]

Dual polarization quadrature phase shifting keying (DP-QPSK) modulation format along with coherent receiver helps in increasing the data carrying capability of existing optical networks without any major change in existing transmission infrastructure. The various linear and nonlinear fiber effects, frequency and phase errors are corrected in electrical domain at the receiver end with digital back propagation algorithms (DBP) instead of in-line compensation. In such a case the selection of optimum values of system parameters make the task easier for DBP algorithms. This paper highlights the importance of finding optimum operating point of continuous modulus algorithm (CMA) for better adaptive equalization (AE). The paper also discusses the optical pulse shaping using Gaussian optical band-pass filter to improve the spectral characteristics of DP-QPSK signal. [ABSTRACT FROM AUTHOR]

The dependable functioning of switchgear is essential to maintain the stability of power supply systems. Partial discharge (PD) is a critical phenomenon affecting the insulation of switchgear, potentially leading to equipment failure and accidents. PDs are generally grouped into metal particle discharge, suspended discharge, and creeping discharge. Different types of PDs are closely related to the severity of a PD. Partial discharge pattern recognition (PDPR) plays a vital role in the early detection of insulation defects. In this regard, a Back Propagation Neural Network (BPNN) for PDPR in switchgear is proposed in this paper. To eliminate the sensitivity to initial values of BPNN parameters and to enhance the generalized ability of the proposed BPRN, an improved Mantis Search Algorithm (MSA) is proposed to optimize the BPNN. The improved MSA employs some boundary handling strategies and adaptive parameters to enhance the algorithm's efficiency in optimizing the network parameters of BPNN. Principal Component Analysis (PCA) is introduced to reduce the dimensionality of the feature space to achieve significant time saving in comparable recognition accuracy. The initially extracted 14 feature values are reduced to 7, reducing the BPNN parameter count from 183 with 14 features to 113 with 7 features. Finally, numerical results are presented and compared with Decision Tree (DT), k-Nearest Neighbor classifiers (KNN), and Support Vector Machine (SVM). The proposed method in this paper exhibits the highest recognition accuracy in metal particle discharge and suspended discharge. [ABSTRACT FROM AUTHOR]

Soil salinization has seriously affected agricultural production and ecological balance in the Yellow River Delta region. Rapid and accurate monitoring of soil salinity has become an urgent need. Traditional machine learning models tend to fall into local optimal values during the learning process, which reduces their accuracy. This paper introduces Circle map to enhance the crayfish optimization algorithm (COA), which is then integrated with the regularized extreme learning machine (RELM) model, aiming to improve the accuracy of soil salinity content (SSC) inversion in the Yellow River Delta region. We employed Landsat5 TM remote sensing images and measured salinity data to develop spectral indices, such as the band index, salinity index, vegetation index, and comprehensive index, selecting the optimal modeling variable group through Pearson correlation analysis and variable projection importance analysis. The back propagation neural network (BPNN), RELM, and improved crayfish optimization algorithm–regularized extreme learning machine (ICOA-RELM) models were constructed using measured data and selected variable groups for SSC inversion. The results indicate that the ICOA-RELM model enhances the R 2 value by an average of about 0.1 compared to other models, particularly those using groups of variables filtered by variable projection importance analysis as input variables, which showed the best inversion effect (test set R 2 value of 0.75, MAE of 0.198, RMSE of 0.249). The SSC inversion results indicate a higher salinization degree in the coastal regions of the Yellow River Delta and a lower degree in the inland areas, with moderate saline soil and severe saline soil comprising 48.69% of the total area. These results are consistent with the actual sampling results, which verify the practicability of the model. This paper's methods and findings introduce an innovative and practical tool for monitoring and managing salinized soils in the Yellow River Delta, offering significant theoretical and practical benefits. [ABSTRACT FROM AUTHOR]

Combined with the energy consumption data of individual buildings in the logistics group of Yangtze University, the analysis model scheme of energy consumption of individual buildings in the university is studied by using Back Propagation (BP) neural network to solve nonlinear problems and have the ability of global approximation and generalization. By analyzing the influence of different uses, different building surfaces and different energy-saving schemes on the change of building energy consumption, the grey correlation method is used to determine the main influencing factors affecting each building energy consumption, including uses, building surfaces and energy-saving schemes, which are used as the input of the model and the building energy consumption as the output of the model, so as to establish the building energy consumption analysis model based on BP neural network. However, in practical application, BP neural network has the defects of slow convergence and easy to fall into local minima. In view of this, this paper uses genetic algorithm to optimize the weight and threshold of BP neural network, completes the improvement of various building energy consumption analysis models, and realizes the qualitative analysis of building energy consumption. The model verification results show that the viscosity of the building energy consumption analysis model based on genetic algorithm improved BP neural network algorithm (GABP) in this paper is relatively high, which is more accurate than the results of the traditional BP neural network model, and the relative error of the analysis model is reduced from 11.56% to 8.13%, which proves that the GABP can be better suitable for the study of school building energy consumption analysis model, It is applied to the prediction of building energy consumption, which lays a foundation for the realization of carbon neutralization in the South expansion plan of Yangtze University. [ABSTRACT FROM AUTHOR]

Recycling wastewater of the pulping and paper-making industry are widely considered for clean production, which heavily rely on the timely and accurate monitoring in paper-making wastewater treatment processes. A novel predicting model based on genetic-deep belief network algorithm was proposed to improve the predictive accuracy and reliability for process monitoring. Considering the deep belief networks (DBN) as a deep learning model is aiming to describe the relationship among variables in a complex process modeling, genetic algorithm (GA) was employed to reduce the input variables dimensionality, simplify the network structure and overcome the dynamic characteristic difficulties of process data in monitoring. Compared with DBN and back propagation neural network (BPNN), the GA-DBN effectively achieved a better predictive accuracy than other tests models in complex wastewater treatment processes. The value of the coefficient of determination of GA-DBN model is increased by 1.71–1.86% and 5.21–9.32%, respectively. The GA-DBN model can be structured with fewer variables or samples to describe the complex paper-making wastewater treatment process, obtaining the better model performance and predictive accuracy. [ABSTRACT FROM AUTHOR]

Power system operation and control are based on power flow calculations. In order to solve the uncertainty of the increasing penetration of renewable energy, the voltage fluctuation at the load point increases in the distribution network, and the inaccuracy of the power flow calculation due to the insufficient power flow data collection capability of the traditional power system. In this paper, a data‐driven power flow analysis model is proposed, a back propagation neural network combined with genetic algorithm (GA) and adaptive moment estimation (ADAM) optimization algorithm model is constructed to analyze the power flow calculation method of distribution networks under stochasticity. Firstly, the power flow initial value information, topology characteristics, and power factor index are introduced to construct a training set, and the mapping relationship between bus voltage and power is fully explored by training the regression model. Second, the GA‐ADAM algorithm is used to optimize the initial values and weight parameters of the model. Finally, it is verified based on IEEE‐33 bus distribution model, and the model is used for power flow calculation, and compared with other methods through each relevant error evaluation indicators. The results show that the model constructed in this paper has small error indicators and high accuracy, which improves the efficiency and accuracy of power flow calculation. [ABSTRACT FROM AUTHOR]

The motivation of this paper is to solve the problem of tourism majors' lack of theoretical knowledge and professional ability by building a capacity training mechanism model based on grounded theory. The goal of the study is to optimize the ability training strategies of tourism undergraduates and improve their professional quality and competitiveness. The paper adopts the ability training model based on grounded theory, and combines with Back Propagation (BP) neural network for optimization and evaluation. By comparing the performance of different ability training mechanisms, this paper explores the best training strategies to provide support and guidance for the training of tourism undergraduates. Firstly, the employment background of the current market is studied and analyzed. By sorting out the relevant documents of grounded theory and combining with the current training strategies of tourism majors, the students' personality characteristics and the basic principles of establishing models are integrated. The Back Propagation (BP) neural network is combined with the grounded theory. The data input of the student ability model is re-optimized. The undergraduate competency training mechanism model is constructed. The results show that when the number of iterations of the network model is 500.00, the evaluation accuracy of the competency training model based on BP neural network can reach 70.00%. At this time, the evaluation accuracy of competency training model based on content analysis method is only 55.00%. In addition, the results show that with the increase of model iterations, the recognition accuracy of the ability model based on grounded theory and the ability training mechanism of content analysis method is continuously improved. However, the ability evaluation model based on grounded theory has higher accuracy, and the accuracy of ability evaluation even exceeds 78.52% when the number of iterations of the network model is 600. Secondly, through the statistics and comparison of the grading results of students of different majors, it is found that the ability training mechanism based on grounded theory can improve the overall ability level of students more significantly. The research has important reference value for promoting the optimization and perfection of students' training strategies. [ABSTRACT FROM AUTHOR]

Purpose: Due to the existence of information opacity, there is a common problem of adverse selection in the process of screening alternative technology start-ups (TSs) and determining investment targets by venture capital institutions, which does not reveal the true value of enterprises and makes the market inefficient. The aim of this paper is to design an evaluation and screening system help venture capital institutions to select the qualified TSs as their investment objective. Design: A research framework of four dimensions that include conception, technical innovation, business model and team structure, was built based on previous studies. Based on the research framework, 15 second-level indicators and 33 third-level indicators were extracted with literature research method. This paper proposes an evaluation model with back propagation neural network (BPNN) optimized by genetic algorithm (GA) to improve the rate of selecting and investing in qualified start-ups. Findings: The results show that the evaluation accuracy of the evaluation model for qualified and unqualified enterprises can reach 80.33% and 93.67% respectively, which has verified the effectiveness of the model and algorithm. Originality/Value: This paper established an effective evaluation system based on PCA and GA-BPNN to help venture capital institutions preliminarily screen potential technology start-ups, which provides the possibility for venture capital institutions to greatly reduce the screening time and cost, improve the screening efficiency of TSs, and scientifically assess the risk of investee projects or investee enterprises to obtain sustainable and stable excess profits. [ABSTRACT FROM AUTHOR]

This paper highlights the need for intelligent analysis of students' behavioral states in physical education tasks. The hand-ring inertial data is used to identify students' motion sequence states. First, statistical feature extraction is performed based on the acceleration and angular velocity data collected from the bracelet. After completing the filtering and noise reduction of the data, we perform feature extraction by Back Propagation Neural Network (BPNN) and use the sliding window method for analysis. Finally, the classification capability of the model sequence is enhanced by the Hidden Markov Model (HMM). The experimental results indicate that the classification accuracy of student action sequences in physical education exceeds 96% after optimization by the HMM method. This provides intelligent means and new ideas for future student state recognition in physical education and teaching reform. [ABSTRACT FROM AUTHOR]

To solve the high error phenomenon of microelectromechanical systems (MEMS) due to their poor signal-to-noise ratio, this paper proposes an online compensation algorithm wavelet threshold back-propagation neural network (WT-BPNN), based on a neural network and designed to effectively suppress the random error of MEMS arrays. The algorithm denoises MEMS and compensates for the error using a back propagation neural network (BPNN). To verify the feasibility of the proposed algorithm, we deployed it in a ZYNQ-based MEMS array hardware. The experimental results showed that the zero-bias instability, angular random wander, and angular velocity random wander of the gyroscope were improved by about 12 dB, 10 dB, and 7 dB, respectively, compared with the original device in static scenarios, and the dispersion of the output data was reduced by about 8 dB in various dynamic environments, which effectively verified the robustness and feasibility of the algorithm. [ABSTRACT FROM AUTHOR]

As a transitional vehicle between fuel and electric vehicles, hybrid vehicles achieve energy savings and emission reductions without range anxiety. Regenerative braking has a direct impact on the fuel consumption of the whole vehicle; however, the current regenerative braking strategy for commercial vehicles is not yet perfect and has a poor adaptability in terms of working conditions and whole-vehicle load changes. Therefore, this paper proposes a regenerative braking strategy based on the identification of working conditions, by considering the influence of the vehicle load state and driving conditions on braking. Firstly, historical driving data of commercial vehicles were obtained from GPS data, driving conditions were classified using principal component analysis (PCA) and K-means, and a working condition recogniser was constructed using a back propagation neural network (BPNN) optimised with the Coati optimisation algorithm (COA). The recognition accuracy of the COA-BPNN was 7.6% better than that of the BPNN. Secondly, front and rear axle braking force distribution strategies are proposed, according to the braking intensity magnitude and load state under empty-, half-, and full-load conditions. Finally, a genetic algorithm (GA) was used to find the optimal control parameters for each category of working conditions, and the COA-BPNN condition recogniser identified the current category of working conditions needed to retrieve the corresponding optimal control parameters in the offline parameter library. The simulation results under C-WTVC and synthetic conditions show that the energy recovery rate of the proposed strategy in this paper reached up to 69.65%, which is at most 206.3% higher than that of the fixed-ratio strategy and at most 37.4% higher than that of the fuzzy control strategy. [ABSTRACT FROM AUTHOR]

The distribution network is a crucial component of the power system as it directly connects to users and serves the purpose of distributing power and balancing the load. With the integration of new energy sources through distributed generation (DG), the distribution network has undergone a transformation from a single power radial network into a complex multi-source network. Consequently, traditional fault location methods have proven inadequate in this new network structure. Therefore, the focus of this paper is to investigate fault location techniques specifically tailored for DG integration into distribution networks. This paper analyzes how fault conditions impact the characteristics of single-phase grounding faults and extracts spectral feature quantities to describe differences in zero-sequence currents under various fault distances. This paper also proposes a fault location method based on centroid frequency and a BPNN (back propagation neural network). The method uses centroid frequency to describe the features of zero-sequence currents; to simulate the mapping relationship between fault conditions and spectral features, BPNN is employed. The mapping relationship differs for different lines and distribution networks. When a line faults, the spectral features are calculated, along with the transition resistance and fault closing angle. The corresponding mapping relationship is then called upon to complete distance measurements. This location method can be applied to various types of distribution lines and fault conditions with high accuracy. Even with insufficient training samples, sample expansion can ensure accuracy in fault distance measurement. We built a distribution network consisting of four feeders with different types and lengths of each line on Simulink and verified the effectiveness of the proposed method by setting different fault conditions. The results suggest that the method has a clear advantage over other frequency domain-based approaches, especially for hybrid lines and feeder lines with branches in distribution networks. Additionally, the method achieves a measurement accuracy within a range of 100 m. [ABSTRACT FROM AUTHOR]

Debris flow is a sudden natural disaster in mountainous areas, which seriously threatens the lives and property of nearby residents. Therefore, it is necessary to predict the volume of debris flow accurately and reliably. However, the predictions of back propagation neural networks are unstable and inaccurate due to the limited dataset. In this study, the Cubic map optimizes the initial population position of the whale optimization algorithm. Meanwhile, the adaptive weight adjustment strategy optimizes the weight value in the shrink-wrapping mechanism of the whale optimization algorithm. Then, the improved whale optimization algorithm optimizes the final weights and thresholds in the back propagation neural network. Finally, to verify the performance of the final model, sixty debris flow gullies caused by earthquakes in Longmenshan area are selected as the research objects. Through correlation analysis, 4 main factors affecting the volume of debris flow are determined and inputted into the model for training and prediction. Four methods (support vector machine regression, XGBoost, back propagation neural network optimized by artificial bee colony algorithm, back propagation neural network optimized by grey wolf optimization algorithm) are used to compare the prediction performance and reliability. The results indicate that loose sediments from co-seismic landslides are the most important factor influencing the flow of debris flows in the earthquake area. The mean absolute percentage error, mean absolute error and R2 of the final model are 0.193, 29.197 × 104 m3 and 0.912, respectively. The final model is more accurate and stable when the dataset is insufficient and under complexity. This is attributed to the optimization of WOA by Cubic map and adaptive weight adjustment. In general, the model of this paper can provide reference for debris flow prevention and machine learning algorithms. [ABSTRACT FROM AUTHOR]

When the linear Model Predictive Control (MPC) algorithm is used for trajectory tracking control of autonomous vehicles in high-speed turning conditions, the tracking accuracy is usually decreased due to the low fidelity of the predictive model. To deal with this problem, a trajectory tracking controller based on Neural Network Predictive Control (NNPC) is designed in this paper. The data collected from driving simulation experiments is used for the Back Propagation Neural Network (BPNN) training process to obtain the vehicle state predictive models. To reduce the iteration times of the rolling optimization module of NNPC, Particle Swarm Optimization (PSO) with Fitness Allocating Inertia Weights (PSO-FAIW) algorithm is proposed, which can allocate inertia weights in light of the distance between each particle's fitness and the best fitness of the swarm. Finally, the performance of the controller designed in this paper is verified based on MATLAB /Simulink. The simulation results demonstrate that the controller proposed in this paper can give consideration to tracking accuracy and real-time performance. [ABSTRACT FROM AUTHOR]

Ethnic minority resources are very rich and contain rich historical resources and culture. Under the impact of modern information technology, the development of minority resources and the inheritance of ethnic culture are facing many challenges, and the current school education is lagging behind in exploring the ecological resources of minority groups, which makes the integration of creative education and minority groups encounter a bottleneck. In response to this situation, we make full use of the platform of creative education to actively explore the traditional skills contained in the lives of ethnic minorities. In the evaluation of creative education, we should not only focus on the evaluation of students' works, but also on the improvement of students' knowledge of various creative tools, their ability to use comprehensive subject knowledge, hands-on ability, solution ability and creativity ability during the whole learning process. Based on this, this paper proposes a back propagation neural network (BPNN)-based quality evaluation method for creative education to evaluate the quality of creative education from multiple dimensions. Experiments and comparisons show that the BPNN-based evaluation method proposed in this paper can better evaluate the whole process of creative education and help the further development of creative education in minority regions. [ABSTRACT FROM AUTHOR]

This research paper is devoted to including new methods of approximation in Theory Of Approximation using Chebyshev Polynomials. The research focuses on creating a potential model for approximation using Neural Networks. This work enables mathematical analysis of the Chebyshev polynomials and activation functions. One of the goals of this paper was to minimize the time spent on the learning process. However, implementing every term of Chebyshev Polynomial could only be realized in some frameworks. [ABSTRACT FROM AUTHOR]

With the development of information technology construction in schools, predicting student grades has become a hot area of application in current educational research. Using data mining to analyze the influencing factors of students' performance and predict their grades can help students identify their shortcomings, optimize teachers' teaching methods and enable parents to guide their children's progress. However, there are no models that can achieve satisfactory predictions for education-related public datasets, and most of these weakly correlated factors in the datasets can still adversely affect the predictive effect of the model. To solve this issue and provide effective policy recommendations for the modernization of education, this paper seeks to find the best grade prediction model based on data mining. Firstly, the study uses the Factor Analyze (FA) model to extract features from the original data and achieve dimension reduction. Then, the Bidirectional Gate Recurrent Unit (BiGRU) model and attention mechanism are utilized to predict grades. Lastly, Comparing the prediction results of ablation experiments and other single models, such as linear regression (LR), back propagation neural network (BP), random forest (RF), and Gate Recurrent Unit (GRU), the FA-BiGRU-attention model achieves the best prediction effect and performs equally well in different multi-step predictions. Previously, problems with students' grades were only detected when they had already appeared. However, the methods presented in this paper enable the prediction of students' learning in advance and the identification of factors affecting their grades. Therefore, this study has great potential to provide data support for the improvement of educational programs, transform the traditional education industry, and ensure the sustainable development of national talents. [ABSTRACT FROM AUTHOR]

The current commercial intelligent driving systems still take the optimal strategy judged by the machine to be the only goal. Therefore, in order to improve the driving experience of the intelligent driving following scene, based on the assumption that environmental factors remain unchanged for a short time, five important parameters affecting the following scene are selected through correlation analysis, and vehicle-following research is carried out. This paper adopts a driver-following model based on a Genetic Algorithm (GA)-optimized Back Propagation (BP) neural network. Based on the data of next-generation simulation (ngsim), this paper selects vehicle 32 (32 represents the ID of the vehicle in the ngsim project) as the main vehicle in order to study short-term driving habits. A BP neural network is built using MATLAB; 60% of the data of vehicles 32 and 29 is used for the training set, 20% is used for the verification set, and 20% for the test set. Because short-term prediction requires high timeliness, the genetic algorithm is used to optimize the initial weights of the neural network, which not only accelerates the convergence speed but also plays a role in avoiding the local optimal solution. The experimental results show that compared with the traditional stimulus-response vehicle-following model, this model has a following ability that is more in line with the driver's driving habits in terms of ensuring following safety. [ABSTRACT FROM AUTHOR]

Time-of-use (TOU) is an effective price-based demand response strategy. A reasonable design of TOU strategy can effectively reduce the peak-valley difference, and then produce a lot of benefits (such as delaying power grid investment, reducing interruption cost, and improving reliability). However, changing peak-valley period has a great influence on the peak-valley difference and power supply reliability of power system. Therefore, this paper aims to investigate the optimal modification of peak-valley period considering reliability loss under multiple TOU schemes. Firstly, this paper presents a clustering model and algorithm of optimal load curve based on a minimum error iteration method. Secondly, an optimal modification of peak-valley period based on a dynamic load point method is proposed, and the traditional peak-valley difference is replaced by the global peak-valley difference to calculate the objective function. Thirdly, this paper establishes a load–reliability relation fitting model based on the back propagation neural network. Finally, the effectiveness and correctness of the proposed method are investigated by the Roy Billinton test system and reliability test system. [ABSTRACT FROM AUTHOR]

The learning process and hyper-parameter optimization of artificial neural networks (ANNs) and deep learning (DL) architectures is considered one of the most challenging machine learning problems. Several past studies have used gradient-based back propagation methods to train DL architectures. However, gradient-based methods have major drawbacks such as stucking at local minimums in multi-objective cost functions, expensive execution time due to calculating gradient information with thousands of iterations and needing the cost functions to be continuous. Since training the ANNs and DLs is an NP-hard optimization problem, their structure and parameters optimization using the meta-heuristic (MH) algorithms has been considerably raised. MH algorithms can accurately formulate the optimal estimation of DL components (such as hyper-parameter, weights, number of layers, number of neurons, learning rate, etc.). This paper provides a comprehensive review of the optimization of ANNs and DLs using MH algorithms. In this paper, we have reviewed the latest developments in the use of MH algorithms in the DL and ANN methods, presented their disadvantages and advantages, and pointed out some research directions to fill the gaps between MHs and DL methods. Moreover, it has been explained that the evolutionary hybrid architecture still has limited applicability in the literature. Also, this paper classifies the latest MH algorithms in the literature to demonstrate their effectiveness in DL and ANN training for various applications. Most researchers tend to extend novel hybrid algorithms by combining MHs to optimize the hyper-parameters of DLs and ANNs. The development of hybrid MHs helps improving algorithms performance and capable of solving complex optimization problems. In general, the optimal performance of the MHs should be able to achieve a suitable trade-off between exploration and exploitation features. Hence, this paper tries to summarize various MH algorithms in terms of the convergence trend, exploration, exploitation, and the ability to avoid local minima. The integration of MH with DLs is expected to accelerate the training process in the coming few years. However, relevant publications in this way are still rare. [ABSTRACT FROM AUTHOR]

Economic forecasting is affected by many factors. The analysis of economic data needs an intuitive and operable algorithm model. Therefore, based on this, this paper designs an urban and rural economic forecasting system based on neural network algorithm, and conducts a system test. First of all, in the data processing module, this paper adopts an efficient BP neural network algorithm based on error back propagation. This algorithm can effectively improve the accuracy of data recognition. At the same time, in order to solve the identification error caused by the complexity of urban and rural economic data during data input, the data processing layer of the system can preprocess the input data and normalize the multiple linear regression algorithm. Finally, in order to further prove the availability of the neural network algorithm used in this paper, by comparing the results of the original data and the predicted data, it is concluded that the data prediction results obtained by using the model algorithm in this paper have high accuracy and are basically consistent with the target value. Finally, through the analysis of the urban and rural economic development data, the degree of coordination of urban and rural economic development is analyzed, and the urban and rural development model is constructed. This paper also further analyzes the factors that restrict the coordinated development of urban and rural economy through indicators such as population structure, economic development, residents' life, social services and ecological construction, so as to achieve a more comprehensive urban and rural economic forecast, and provide a basis for improving the development of urban and rural economy in the regional economy. [ABSTRACT FROM AUTHOR]

Firefighting soldiers are in danger during firefighting operations, and it is necessary to monitor the data of their physical indicators to ensure the safety of firefighting soldiers, improvement of the safety of firefighting personnel. A single sensor will appear the information blind spot, and has the defects of measurement limitation, low robustness and low precision, which can't satisfy the need of accurately judging the current state of the firefighting soldier. Therefore, this paper investigates the distribution characteristics of multi-dimensional data of firefighting soldiers in the process of working movement, The goal of multi-sensor information fusion is based on the separation of observations from each sensor, and its ultimate goal is to utilize the advantages of multiple sensors operating together or in conjunction to improve the effectiveness of the entire sensor system, the distribution characteristics of multi-dimensional data effectively improve the shortcomings of a single sensor. By introducing the idea of improving the local optimum of back propagation of BP neural network algorithm and the defects of network weights, this paper proposes a relevant fusion algorithm based on firefighting soldiers, establishes a kinematic physiological monitoring model based on firefighting soldiers, and realizes the physiological state monitoring of firefighting soldiers in the complex working environment. Experimental results show that this method can improve the accuracy with which data from several sensors determine the condition of firefighters, decision making for firefighting singletons' safety and security can be effectively improved by multi-sensor data fusion, and the accuracy of the improved FWA-BP data fusion algorithm model is increased by 3.64%, which improves the stability of the system. [ABSTRACT FROM AUTHOR]

The " C μ -stall" phenomenon of supersonic Coanda jet is one of the difficult problems to be solved in circulation control technology. In this paper, the circulation control of supersonic jet under high-subsonic flight state is studied. The " C μ -stall" phenomenon of supersonic Coanda jet is deeply explored. In this paper, it is found that there is the first " C μ -stall" phenomenon before the periodic detachment of the jet. This phenomenon will also lead to a sudden drop of lift, but it will not cause the jet to detach from the Coanda surface. The first " C μ -stall" is the main factor limiting the effect of supersonic circulation control. A scheme of using staged jet to delay " C μ -stall" phenomenon and improve the lift increasing effect of circulation control airfoil is proposed. The results show that the secondary-jet can effectively delay the " C μ -stall" phenomenon and increase the maximum lift coefficient from 0.4986 to 0.5763. The influence of secondary-jet on supersonic Coanda jet (main-jet) can be divided into the influence on its expansion degree and the influence on its attachment distance. The secondary-jet with appropriate strength can not only increase the expansion degree of the main-jet but also prolong the attachment distance of the main-jet, so as to obtain a higher lift coefficient. Finally, taking the lift coefficient as the optimization objective, this paper uses the back propagation (BP) neural network to optimize the mass flow rate combination of the staged jet scheme and improves the maximum lift coefficient to 0.5821. [ABSTRACT FROM AUTHOR]

Cold medications are widely used in daily life, and the quality and safety of the medications are directly related to the personal health of the user. However, with more and more lawbreakers imitating medications for profit and medication regulation looming, it is important to distinguish among cold medicines with similar ingredients. In this paper, the combination of laser-induced breakdown spectroscopy (LIBS) with t-distributed stochastic neighbour embedding (t-SNE) and back propagation neural network (BPNN) was proposed for classification and traceability of cold medications with the same main ingredient, compounded paracetamol and amantadine hydrochloride. Firstly, the elements contained in six extremely similar cold medications were analysed by LIBS. Then, t-SNE, a method of high-dimensional data visualization and dimensionality reduction, presented better classification results than other methods, i.e., principal component analysis (PCA), local semantic analysis (LSA), independent component analysis (ICA), linear analysis (Linear), Isomap and local linear embedding (LLE). However, it has limitations because of the number of datasets. Finally, BPNN was used to accurately trace these cold medications with its highly self-learning and self-adaptive ability, and the recognition accuracy was up to 96.7%. The results show that LIBS combined with t-SNE and BPNN provides assistance in drug classification as well as traceability. [ABSTRACT FROM AUTHOR]

Mega-constellation network traffic forecasting provides key information for routing and resource allocation, which is of great significance to the performance of satellite networks. However, due to the self-similarity and long-range dependence (LRD) of mega-constellation network traffic, traditional linear/non-linear forecasting models cannot achieve sufficient forecasting accuracy. In order to resolve this problem, a mega-constellation network traffic forecasting model based on EMD (empirical mode decomposition)-ARIMA (autoregressive integrated moving average) and IGWO (improved grey wolf optimizer) optimized BPNN (back-propagation neural network) is proposed in this paper, which makes comprehensive utilization of linear model ARIMA, non-linear model BPNN and optimization algorithm IGWO. With the enhancement of the global optimization capability of a BPNN, the proposed hybrid model can fully realize the potential of mining linear and non-linear laws of mega-constellation network traffic, hence improving the forecasting accuracy. This paper utilizes an ON/OFF model to generate historical self-similar traffic to forecast. RMSE (root mean square error), MAE (mean absolute error), R-square and MAPE (mean absolute percentage error) are adopted as evaluation indexes for the forecasting effect. Comprehensive experimental results show that the proposed method outperforms traditional constellation network traffic forecasting schemes, with several improvements in forecasting accuracy and efficiency. [ABSTRACT FROM AUTHOR]

How to evaluate the reliability of deep soft rock tunnels under high stress is a very important problem to be solved. In this paper, we proposed a practical stochastic reliability method based on the third-generation non-dominated sorting genetic algorithm (NSGA–III) and eXtreme Gradient Boosting (XGBoost). The proposed method used the Latin hypercube sampling method to generate the dataset samples of geo-mechanical parameters and adopted XGBoost to establish the model of the nonlinear relationship between displacements and surrounding rock mechanical parameters. And NSGA–III was used to optimize the surrogate model hyper-parameters. Finally, the failure probability was computed by the optimized surrogate model. The proposed approach was firstly implemented in the analysis of a horseshoe-shaped highway tunnel to illustrate the efficiency of the approach. Then, in comparison to the support vector regression method and the back propagation neural network method, the feasibility, validity and advantages of XGBoost were demonstrated for practical problems. Using XGBoost to achieve Monte Carlo simulation, a surrogate solution can be provided for numerical simulation analysis to overcome the time-consuming reliability evaluation of initial support structures in soft rock tunnels. The proposed method can evaluate quickly the large deformation disaster risks of non-circular deep soft rock tunnels. [ABSTRACT FROM AUTHOR]

Fourier ptychographic microscopy, as a computational imaging method, can reconstruct high-resolution images but suffers optical aberration, which affects its imaging quality. For this reason, this paper proposes a network model for simulating the forward imaging process in the Tensorflow framework using samples and coherent transfer functions as the input. The proposed model improves the introduced Wirtinger flow algorithm, retains the central idea, simplifies the calculation process, and optimizes the update through back propagation. In addition, Zernike polynomials are used to accurately estimate aberration. The simulation and experimental results show that this method can effectively improve the accuracy of aberration correction, maintain good correction performance under complex scenes, and reduce the influence of optical aberration on imaging quality. [ABSTRACT FROM AUTHOR]

Hydrological and water quality datasets usually encompass a large number of characteristic variables, but not all of these significantly influence analytical outcomes. Therefore, by wisely selecting feature variables with rich information content and removing redundant features, it not only can the analysis efficiency be improved, but the model complexity can also be simplified. This paper considers introducing the granular-ball rough set algorithm for feature variable selection and combining it with the k-nearest neighbor method and back propagation network to analyze hydrological and water quality data, thus promoting overall and fused inspection. The results of hydrological water quality data analysis show that the proposed method produces better results compared to using a standalone k-nearest neighbor regressor. [ABSTRACT FROM AUTHOR]

Accurately predicting hydrological runoff is crucial for water resource allocation and power station scheduling. However, there is no perfect model that can accurately predict future runoff. In this paper, a daily runoff prediction method with a seasonal decomposition-based-deep gated-recurrent-unit (GRU) method (SD-GRU) is proposed. The raw data is preprocessed and then decomposed into trend, seasonal, and residual components using the seasonal decomposition algorithm. The deep GRU model is then used to predict each subcomponent, which is then integrated into the final prediction results. In particular, the hyperparameter optimization algorithm of tree-structured parzen estimators (TPE) is used to optimize the model. Moreover, this paper introduces the single machine learning model (including multiple linear regression (MLR), back propagation (BP), long short-term memory neural network (LSTM) and gate recurrent unit (GRU)) and a combination model (including seasonal decomposition–back propagation (SD-BP), seasonal decomposition–multiple linear regression (SD-MLR), along with seasonal decomposition–long-and-short-term-memory neural network (SD-LSTM), which are used as comparison models to verify the excellent prediction performance of the proposed model. Finally, a case study of the Qingjiang Shuibuya test set, which considers the period 1 January 2019 to 31 December 2019, is conducted. Case studies of the Qingjiang River show the proposed model outperformed the other models in prediction performance. The model achieved a mean absolute error (MAE) index of 38.5, a Nash-Sutcliffe efficiency (NSE) index of 0.93, and a coefficient of determination (R2) index of 0.7. In addition, compared to the comparison model, the NSE index of the proposed model increased by 19.2%, 19.2%, 16.3%, 16.3%, 2.2%, 2.2%, and 1.1%, when compared to BP, MLR, LSTM, GRU, SD-BP, SD-MLR, SD-LSTM, and SD-GRU, respectively. This research can provide an essential reference for the study of daily runoff prediction models. [ABSTRACT FROM AUTHOR]

Big data analysis technologies and machine learning techniques are essential for examining and forecasting the state of network security as global concerns about cyber security grow. Models for monitoring network security have a number of challenges, including resource consumption, inaccuracies, low processing efficiency, and incompatibility with real-time and large-scale scenarios. This paper proposes a novel approach to Network Security Situation Awareness (NS-SA) using Big Data (BD) analytics and machine learning. The proposed approach addresses the limitations of existing NS-SA models by leveraging data purification and simplification techniques, and by employing an updated back propagation (BP) neural network to construct an NS BD analysis model. The paper provides a comprehensive explanation of the model's structure and outlines the relevant model techniques. Extensive testing has been conducted to ensure the model's accuracy and applicability in understanding NS scenarios. This study focuses on MATLAB and Python-based implementation of a neural network for network security using a big data approach. The results demonstrate the potential and value of the proposed model in accurately assessing and forecasting NS conditions. The proposed approach has several advantages over existing NS-SA models. It is more efficient in terms of resource usage, it is more accurate in its analysis of network data, It is more applicable in real-time and large-scale scenarios and it is more robust to noise and heterogeneity in network data. [ABSTRACT FROM AUTHOR]

To address the significant energy waste generated by axial flow pumps, this paper proposes an intelligent optimization method based on physics-considering machine learning. First, a highly parameterized geometric design theory is constructed using six featured variables to achieve a complete three-dimensional modeling of the blade geometry. Four hundred preliminary cases are studied using the computational fluid dynamics method with various combinations of these featured variables to obtain a preliminary solution. The best preliminary design has an efficiency of 83.33%, and a head of 5.495 m. To further improve this performance, this paper also presents a high-precision prediction model for the energy performance of axial flow pump based on back-propagation neural network and the encoding layers of random sampling and local feature aggregator network created. Afterwards, a multi-population genetic algorithm is used to quickly find the optimal solution within the prediction mode range. The algorithm achieved a highest efficiency of 86.373% and was validated by numerical simulation with a value of 86.057% and a prediction error of 0.316%. Compared with the preliminary solution, the efficiency of the optimized axial flow pump is increased by 1.615%, with a wider high-efficiency range and an optimal operating point closer to the design conditions. Overall, this intelligent optimization method has the potential to significantly reduce the design time of axial pumps and increase their performance. [ABSTRACT FROM AUTHOR]

The quality and efficiency of aircraft maintenance are the key to ensure flight safety and on‐time rate, which mainly depend on the techniques and experience of maintenance engineer. Generally, exercises on physical prototypes are used to improve the maintenance capability of engineers, but this will waste a lot of consumables and easily cause safety accidents. With the development of computer technology, maintenance training in a virtual environment has become an advanced and reliable solution. In this paper, a virtual training system of aircraft maintenance based on gesture recognition interaction is established. Leap Motion is used as a sensor to construct a hybrid machine learning gesture recognition model, so as to obtain natural human–computer interaction experience. In the recognition model, the initial weight matrix and the number of hidden layer nodes in the back propagation neural network are jointly optimized by the Particle Swarm Optimization algorithm with self‐adaption inertial weight. This optimization algorithm achieved a recognition rate of 81.26% in the dynamic gesture database constructed in this paper, which is higher than other available algorithms. A preliminary usability evaluation in university classrooms shows that the teaching system in this paper can achieve a better interactive experience. [ABSTRACT FROM AUTHOR]

Flow admission control (FAC) aims to efficiently manage the service requests while maximizing the network utilization. With multiple connection requests, access delay or even service interruption may occur. This paper proposes a novel FAC approach to reduce the contention between the end nodes and ensure high utilization of the networking resources for software defined IIoT. First, incoming flows are classified into different priorities using back propagation neural network based on selected features representing the current network status. Second, with the designed flow admission policies, bandwidth and buffer size are estimated with stochastic network calculus model. Finally, the thresholds of the proposed FAC scheme are dynamically decided based on the above two parameters. Various flows are admitted or rejected via the proposed FAC to maintain real time processing. Unlike traditional FAC schemes rely on static priority systems, the proposed scheme leverages machine learning technique for dynamic flow prioritization and the stochastic network calculus model for precise estimation. Computer simulation reveals that the proposed scheme accurately classifies the flows, and substantially decreases the transmission delay and improves the network utilization compared to the existing FAC schemes. This highlights the superiority of the proposed scheme meeting the demands of software defined IIoT. [ABSTRACT FROM AUTHOR]

Aiming to address the timing skew mismatch in the time‐interleaved analog‐to‐digital converter (TIADC) system, this paper presents a timing skew mismatch calibration method based on a back propagation (BP) neural network optimized by an adaptive genetic algorithm (AGA). In this paper, a trained BP neural network is used to detect the timing skew mismatch in the TIADC system, and the variable delay line is used to calibrate it. In this paper, AGA is used to optimize the BP neural network, accelerating its training speed and improving the detection accuracy of timing skew mismatch in the system. The proposed approach boasts superior detection speed and accuracy compared to other methods. In this paper, an 18‐bit 1GS/S 4‐channel TIADC system is simulated and the timing skew mismatch in the system is corrected. Simulation results show that the proposed calibration method has fast detection speed, high detection accuracy, and calibration accuracy. After completing the timing skew mismatch correction, the performance of the TIADC system is dramatically improved. The effective number of bits (ENOB) of the system increases by 9.5 bits, and the spurious‐free dynamic range (SFDR) increases by 59.9 dB. [ABSTRACT FROM AUTHOR]

In this era of information technology, information leakage and file corruption due to computer virus intrusion have been serious issues. How to detect and prevent the spread of the computer virus is the major challenge we are facing now. To target this problem, a class of virus propagation models with hybrid control scheme are formulated to investigate the dynamic evolution and prevention from a spatial-temporal perspective in this paper. Diffusion-induced Turing instability is detected in response to the computer virus propagation. The introduction of hybrid control scheme can effective suppress Turing instability and turn the propagation system back to a stable state. And then, the time delay is selected as the bifurcation parameter. If the time delay exceeds the bifurcation threshold, the propagation will be destabilised and a Hopf bifurcation will occur. The hybrid control tactic can not only regulate the occurrence of Hopf bifurcation well, but also optimise the properties of bifurcating period solutions. In the end, the correctness and validity of the theoretical results are verified via numerical simulations. [ABSTRACT FROM AUTHOR]

In this paper, artificial intelligence (AI) technology is applied to the electromagnetic imaging of anisotropic objects. Advances in magnetic anomaly sensing systems and electromagnetic imaging use electromagnetic principles to detect and characterize subsurface or hidden objects. We use measured multifrequency scattered fields to calculate the initial dielectric constant distribution of anisotropic objects through the backpropagation scheme (BPS). Later, the estimated multifrequency permittivity distribution is input to a convolutional neural network (CNN) for the adaptive moment estimation (ADAM) method to reconstruct a more accurate image. In the meantime, we also improve the definition of loss function in the CNN. Numerical results show that the improved loss function unifying the structural similarity index measure (SSIM) and root mean square error (RMSE) can effectively enhance image quality. In our simulation environment, noise interference is considered for both TE (transverse electric) and TM (transverse magnetic) waves to reconstruct anisotropic scatterers. Lastly, we conclude that multifrequency reconstructions are more stable and precise than single-frequency reconstructions. [ABSTRACT FROM AUTHOR]

This paper aims to improve the level of social credit system and the accuracy and efficiency of bank users' credit scoring by using business intelligence technology based on deep neural network (DNN). Firstly, based on the theory of personal credit evaluation factors, a comprehensive credit evaluation factor system is constructed, taking into account social and economic background, consumption habits, behavior patterns and other factors. Meanwhile, back propagation neural network (BPNN) theory is introduced as the core method of modeling to cope with the nonlinear relationship in the credit scoring task and the demand of large-scale data processing. Secondly, by analyzing the operation process of BPNN in detail, the specific application in credit scoring model is emphasized. Finally, on the basis of theory and operation, this paper implements a credit scoring model for bank users based on BPNN theory. The experimental results show that the model realized in this paper can automatically discover the key attributes and internal rules in the sampled data, and adjust the weight and threshold of the network by modifying the parameters and network structure to meet the expected requirements. The accuracy of the credit score of the predicted sample data reaches 99.5%, and the prediction error is very small, which has a good prediction effect. This paper provides a feasible solution for business intelligence and DNN in the field of credit scoring, and also provides strong empirical support for improving the level of social credit system. [ABSTRACT FROM AUTHOR]

To characterize the complex creep behavior of steel slag–asphalt mixture influenced by both stress and temperature, predictive models employing Back Propagation (BP) and Long Short-Term Memory (LSTM) neural networks are described and compared in this paper. Multiple stress repeated creep recovery tests on AC-13 grade steel slag–asphalt mix samples were conducted at different temperatures. The experimental results were processed into a group of independent creep recovery test results, then divided into training and testing datasets. The K-fold cross-validation was applied to the training datasets to fine-tune the hyperparameters of the neural networks effectively. Compared with the experimental curves, both the effects of BP and LSTM models were investigated, and the broad applicability of the models was proven. The performance of the trained LSTM model was observed by a 95% confidence interval around the fit errors, thereby the creep strain intervals for the testing dataset were obtained. The results suggest that the LSTM model had enhanced prediction compared the BP model for creep deformation trends of steel slag–asphalt mixture at various temperatures. Due to the potent generalization strength of artificial intelligence technology, the LSTM model can be further expanded for forecasting road rutting deformations. [ABSTRACT FROM AUTHOR]

The terminal settling velocity of microplastics plays a vital role in the physical behavior of microplastics, and is related to the migration and fate of these microplastics in the ocean. At present, the terminal settling velocity is mostly calculated by formulae, which also leads to a fewer studies on the use of machine-learning models to predict its settling velocity in this field. This study fills this gap by studying the prediction of the settling velocity by machine-learning models and compares it with the traditional formula calculation method. This study evaluates three machine-learning models, namely, random forest, linear regression, and the back propagation neural network. The results of this study show that the prediction results of the three machine-learning models are more accurate than those of traditional formula calculations, with an accuracy increase of 12.79% (random forest), 9.3% (linear regression), and 13.92% (back propagation neural network), respectively. At the same time, according to the results of this study, random forest is better than the other models in the mean absolute error and root mean square error evaluation indicators, which are only 0.0036 and 0.0047. This paper proposes three machine-learning methods to prove that the prediction effect of machine learning is much better than traditional formula calculations, thereby improving the shortcomings in this field. At the same time, it also provides reliable data support for studying the migration behavior of microplastics in water bodies. [ABSTRACT FROM AUTHOR]

The theory of composition technology is to study the basic knowledge and skills of musicology, instrumental music, composition, and composition technology, including harmony, polyphony, musical form, orchestration, and so on, and then to analyze, create, and edit music. The current theory of composition technology has resulted in the phenomenon of relatively single form. The current method is the traditional way of composing music through the creation of composers. The defect is that various elements cannot be integrated together, and the meaning of music cannot be perfectly presented. In order to solve these problems, this paper proposes the use of recurrent neural network algorithm and backpropagation algorithm in artificial intelligence algorithm. It aims to study how to innovatively integrate the composition technology theory course with the current network technology. And it utilizes recurrent neural networks in artificial intelligence to help design part of the analysis of musical characteristics, through the evaluation of the music effect generated by automatic composition. The results show that the accuracy of note prediction obtained by the automatic composition method on the basis of objective evaluation is 81.93%, 90.15%, and 92.62%, respectively, on Top1, Top2, and Top3, which basically meet the current basic requirements for composition technology theory. [ABSTRACT FROM AUTHOR]