Search

In this study, the WRF-Chem v4.4 model was utilized to evaluate the sensitivity of O 3 simulations with three bottom-up emission inventories (EDGAR-HTAP v2 and v3 and KORUS v5) using surface and aircraft data in East Asia during the Korea-United States Air Quality (KORUS-AQ) campaign period in 2016. All emission inventories were found to reproduce the diurnal variations of O 3 and its main precursor NO 2 as compared to the surface monitor data. However, the spatial distributions of the daily maximum 8 h average (MDA8) O 3 in the model do not completely align with the observations. The model MDA8 O 3 had a negative (positive) bias north (south) of 30° N over China. All simulations underestimated the observed CO by 50 %–60 % over China and South Korea. In the Seoul Metropolitan Area (SMA), EDGAR-HTAP v2 and v3 and KORUS v5 simulated the vertical shapes and diurnal patterns of O 3 and other precursors effectively, but the model underestimated the observed O 3 , CO, and HCHO concentrations. Notably, the model aromatic volatile organic compounds (VOCs) were significantly underestimated with the three bottom-up emission inventories, although the KORUS v5 shows improvements. The model isoprene estimations had a positive bias relative to the observations, suggesting that the Model of Emissions of Gases and Aerosols from Nature (MEGAN) version 2.04 overestimated isoprene emissions. Additional model simulations were conducted by doubling CO and VOC emissions over China and South Korea to investigate the causes of the model O 3 biases and the effects of the long-range transport on the O 3 over South Korea. The doubled CO and VOC emission simulations improved the model O 3 simulations for the local-emission-dominant case but led to the model O 3 overestimations for the transport-dominant case, which emphasizes the need for accurate representations of the local VOC emissions over South Korea. [ABSTRACT FROM AUTHOR]

To validate the Geostationary Environment Monitoring Spectrometer (GEMS), the GEMS Map of Air Pollution (GMAP) campaign was conducted during 2020–2021 by integrating Pandora Asia Network, aircraft, and in situ measurements. In the present study, GMAP-2020 measurements were applied to evaluate urban air quality and explore the synergy of Pandora column (PC) NO2 measurements and surface in situ (SI) NO2 measurements for Seosan, South Korea, where large point source (LPS) emissions are densely clustered. Due to the difficulty of interpreting the effects of LPS emissions on air quality downwind of Seosan using SI monitoring networks alone, we explored the combined analysis of both PC- NO2 and SI- NO2 measurements. Agglomerative hierarchical clustering using vertical meteorological variables combined with PC- NO2 and SI- NO2 yielded three distinct conditions: synoptic wind-dominant (SD), mixed (MD), and local wind-dominant (LD). These results suggest meteorology-dependent correlations between PC- NO2 and SI- NO2. Overall, yearly daytime mean (11:00–17:00 KST) PC- NO2 and SI- NO2 statistical data showed good linear correlations (R=∼0.73); however, the differences in correlations were largely attributed to meteorological conditions. SD conditions characterized by higher wind speeds and advected marine boundary layer heights suppressed fluctuations in both PC- NO2 and SI- NO2 , driving a uniform vertical NO2 structure with higher correlations, whereas under LD conditions, LPS plumes were decoupled from the surface or were transported from nearby cities, weakening correlations through anomalous vertical NO2 gradients. The discrepancies suggest that using either PC- NO2 or SI- NO2 observations alone involves a higher possibility of uncertainty under LD conditions or prevailing transport processes. However, under MD conditions, both pollution ventilation due to high surface wind speeds and daytime photochemical NO2 loss contributed to stronger correlations through a decline in both PC- NO2 and SI- NO2 towards noon. Thus, Pandora Asia Network observations collected over 13 Asian countries since 2021 can be utilized for detailed investigation of the vertical complexity of air quality, and the conclusions can be also applied when performing GEMS observation interpretation in combination with SI measurements. [ABSTRACT FROM AUTHOR]

The dilution effect caused by boundary-layer evolution over land has strong influences on air quality. Accurate and continuous measurements of the boundary-layer height over urban areas are therefore needed for complete air-quality assessments. Commercial ceilometers, in combination with reliable and simple methodologies, can be used to retrieve the mixed-layer height, and represent a means of obtaining information on vertical mixing and atmospheric structure above cities. Here, we evaluate various retrieval algorithms based on the gradient method against high-temporal-resolution radiosonde observations. Based on the results, we propose a simple algorithm by using the gradient method, the correction of background noise and the moving averages, with the minimum number of parameters that need to be adjusted to the local properties and the instrument itself. The algorithm is adjusted for Seoul, Korea, and improves the retrieval performance by reducing high-frequency noise. The algorithm is used to investigate the relationship between the evolution of the daytime mixed-layer height and air pollution under a two-layer mixing model where changes in concentration depend only on the urban boundary-layer growth and air entrainment from the free atmosphere. Using 2 months of ceilometer retrievals of mixed-layer height and air-quality data from across the city, we find strong negative correlations for primary emitted pollutants such as NO2, CO, SO2, and particulate matter smaller than 10 µm, and a modest positive correlation for O3. The results provide insight into the significant influence of urban boundary-layer evolution on Seoul's air quality. [ABSTRACT FROM AUTHOR]

Accurate and consistent monitoring of anthropogenic combustion is imperative because of its significant health and environmental impacts, especially at city-to-regional scale. Here, we assess the performance of the Copernicus Atmosphere Monitoring Service (CAMS) global prediction system using measurements from aircraft, ground sites, and ships during the Korea-United States Air Quality (KORUS-AQ) field study in May to June 2016. Our evaluation focuses on CAMS CO and CO2 analyses as well as two higher-resolution forecasts (16 and 9 km horizontal resolution) to assess their capability in predicting combustion signatures over east Asia. Our results show a slight overestimation of CAMS CO2 with a mean bias against airborne CO2 measurements of 2.2, 0.7, and 0.3 ppmv for 16 and 9 km CO2 forecasts, and analyses, respectively. The positive CO2 mean bias in the 16 km forecast appears to be consistent across the vertical profile of the measurements. In contrast, we find a moderate underestimation of CAMS CO with an overall bias against airborne CO measurements of -19.2 (16 km), -16.7 (9 km), and -20.7 ppbv (analysis). This negative CO mean bias is mostly seen below 750 hPa for all three forecast/analysis configurations. Despite these biases, CAMS shows a remarkable agreement with observed enhancement ratios of CO with CO2 over the Seoul metropolitan area and over the West (Yellow) Sea, where east Asian outflows were sampled during the study period. More efficient combustion is observed over Seoul (dCO = dCO2 = 9 ppbv ppmv-1) compared to theWest Sea (dCO=dCO2 = 28 ppbv ppmv-1). This "combustion signature contrast" is consistent with previous studies in these two regions. CAMS captured this difference in enhancement ratios (Seoul: 8-12 ppbv ppmv-1, the West Sea: ~30 ppbv ppmv-1) regardless of forecast/analysis configurations. The correlation of CAMS CO bias with CO2 bias is relatively high over these two regions (Seoul: 0.64-0.90, the West Sea: ~0:80) suggesting that the contrast captured by CAMS may be dominated by anthropogenic emission ratios used in CAMS. However, CAMS shows poorer performance in terms of capturing local-to-urban CO and CO2 variability. Along with measurements at ground sites over the Korean Peninsula, CAMS produces too high CO and CO2 concentrations at the surface with steeper vertical gradients (~0:4 ppmv hPa-1 for CO2 and 3.5 ppbv hPa-1 for CO) in the morning samples than observed (0:25 ppmv hPa-1 for CO2 and 1.7 ppbv hPa-1 for CO), suggesting weaker boundary layer mixing in the model. Lastly, we find that the combination of CO analyses (i.e., improved initial condition) and use of finer resolution (9 km vs. 16 km) generally produces better forecasts. [ABSTRACT FROM AUTHOR]