Search

Abstract: Nanoparticles of AP-Al2O3 (aero-gel produced alumina) have been produced by an alkoxide based synthesis involving aluminum powder, methanol, toluene and water. Thus produced alumina nanoparticles were characterized and the data indicated the formation of nanoparticles of alumina in the size range of 2–30nm with high surface area (375m2/g). Thereafter, these nanoparticles were impregnated with reactive chemicals. Adsorptive removal kinetics for DEClP (diethylchlorophosphate) and GB (isopropylmethylphosphonofluoridate, sarin) was monitored by GC–FID (gas chromatograph coupled with flame ionization detector) technique and found to be following pseudo first order reaction kinetics. Among impregnated AP-Al2O3 nanoparticles based sorbent systems AP-Al2O3 impregnated with 9-molybdo-3-vanadophosphoric acid (10%, w/w) was found to be the most reactive with least half-life values of 7 and 30min for the removal of DEClP and GB, respectively, whereas unimpregnated AP-Al2O3 nanoparticles showed the best adsorption potential among all studied systems. In addition to this, hydrolysis reaction {identified using GC/MS (gas chromatograph coupled with mass spectrometer) technique} was found to be the route of degradation of DEClP and GB on impregnated alumina nanoparticles. [Copyright &y& Elsevier]

Abstract: Alumina nanoparticles in the size range of 2–30nm and surface area 375m2/g were synthesized using aerogel route and then characterized using N2–BET, SEM, TEM, XRD, FTIR and TGA techniques. Thereafter, these were impregnated with reactive chemicals and tested for their potential by conducting studies on kinetics of adsorption of 2-chloroethylethylsulphide (2-CEES) under static conditions. Kinetics was studied using linear driving force and Fickian diffusion model. The kinetics parameters such as equilibration constant, equilibration capacity, diffusional exponent and adsorbate–adsorbent interaction constant were also determined. AP-Al2O3 with 10% impregnation of MoVPA (V3) and NaOH showed the maximum (574mg/g) and minimum (88mg/g) uptake of 2-CEES among impregnated systems respectively. All impregnated systems except NaOH impregnation showed the values of diffusional exponent to be <0.5, indicated the diffusion mechanism to be Fickian, whereas AP-Al2O3 with and without NaOH impregnation showed the diffusional mechanism to be anomalous. Hydrolysis and dehydrohalogenation reactions (identified using GC/MS technique) were found to be the route of degradation of 2-CEES. [Copyright &y& Elsevier]

The article presents a study examining the kinetics of adsorption of 2-chloroethylethyl sulfide (2-CEES) and sulfur mustard (HD) on silica nanoparticles that were impregnated with reactive chemicals. The effectiveness of the chemicals against HD is noted, as well as the static conditions under which the kinetics of adsorption of 2-CEES and HD were studied. Linear driving force and Fickian diffusion models were used for the examination, noting that the study determined kinetic parameters including equilibration constant, equilibration capacity, and diffusional exponent.

Abstract: High surface area (887.3m2/g) silica nanoparticles were synthesized using aerogel route and thereafter, characterized by N2-Brunauer–Emmet–Teller (BET), SEM and TEM techniques. The data indicated the formation of nanoparticles of silica in the size range of 24–75nm with mesoporous characteristics. Later, these were impregnated with reactive chemicals such as N-chloro compounds, oxaziridines, polyoxometalates, etc., which have already been proven to be effective against sulphur mustard (HD). Thus, developed novel mesoporous reactive sorbents were tested for their self-decontaminating feature by conducting studies on kinetics of adsorptive removal of HD from solution. Trichloroisocyanuric acid impregnated silica nanoparticles (10%, w/w)-based system was found to be the best with least half-life value (t 1/2 =2.8min) among prepared systems to remove and detoxify HD into nontoxic degradation products. Hydrolysis, dehydrohalogenation and oxidation reactions were found to be the route of degradation of HD over prepared sorbents. The study also inferred that 10% loading of impregnants over high surface area and low density silica nanoparticles enhances the rate of reaction kinetics and seems to be useful in the field of heterogeneous reaction kinetics. [Copyright &y& Elsevier]