Search

In the first half of 2020, the coronavirus pandemic led to a drastic slump in the automotive industry, which was replaced by a surprisingly rapid growth in demand in the fall of 2020, and consequently led to the current shortages in microelectronic products. The prospect of an equally rapid economic recovery in the automotive industry is still threatened by supply bottlenecks for raw materials and key components, foremost for semiconductors. The so-called 'semiconductor crises' show exemplarily the overlapping of short-term supply chain disruptions with long-term structural features of the semiconductor industry. The combination of both is preventing that the supply situation in the automotive industry will improve quickly. First in this paper, the reasons for and respective effects of the crisis on the automotive industry are investigated by a quantitative market analysis. Second, specific strategic measures and options of automotive Original Equipment Manufacturers (OEM) and suppliers in Germany to cope with the situation and increase resilience in future supply chains are described by the means of qualitative expert interviews. By that, the paper helps in understanding the actual situation in the automotive industry, on the one hand, and contributes to the field of strategic supply chain and risk management with a focus on practical implications on the other hand. The results aim to support political stakeholders as well as small and medium sized enterprises to prepare themselves for future developments in the automotive market and changes in manufacturer–supplier relationships due to the transformation to new powertrain technologies and digitization. [ABSTRACT FROM AUTHOR]

In this paper, we demonstrate the capabilities of Pleiades-1a imagery for very high resolution (VHR) crop yield estimation by utilizing the predictor variables from the horizontal-spectral information, through Normalized Difference Vegetation Indices (NDVI), and the vertical-volumetric crop characteristics, through the derivation of Crop Canopy Models (CCMs), from the stereo imaging capacity of the satellite. CCMs captured by Unmanned Aerial Vehicles are widely used in precision farming applications, but they are not suitable for the mapping of large or inaccessible areas. We further explore the spatiotemporal relationship of the CCMs and the NDVI for five observation dates during the growing season for eight selected crop fields in Germany with harvester-measured ground truth crop yield. Moreover, we explore different CCM normalization methods, as well as linear and non-linear regression algorithms, for the crop yield estimation. Overall, using the Extremely Randomized Trees regression, the combination of CCMs and NDVI achieves an R2 coefficient of determination of 0.92. [ABSTRACT FROM AUTHOR]

Precision agriculture relies on understanding crop growth dynamics and plant responses to short-term changes in abiotic factors. In this technical note, we present and discuss a technical approach for cost-effective, non-invasive, time-lapse crop monitoring that automates the process of deriving further plant parameters, such as biomass, from 3D object information obtained via stereo images in the red, green, and blue (RGB) color space. The novelty of our approach lies in the automated workflow, which includes a reliable automated data pipeline for 3D point cloud reconstruction from dynamic scenes of RGB images with high spatio-temporal resolution. The setup is based on a permanent rigid and calibrated stereo camera installation and was tested over an entire growing season of winter barley at the Global Change Experimental Facility (GCEF) in Bad Lauchstädt, Germany. For this study, radiometrically aligned image pairs were captured several times per day from 3 November 2021 to 28 June 2022. We performed image preselection using a random forest (RF) classifier with a prediction accuracy of 94.2% to eliminate unsuitable, e.g., shadowed, images in advance and obtained 3D object information for 86 records of the time series using the 4D processing option of the Agisoft Metashape software package, achieving mean standard deviations (STDs) of 17.3–30.4 mm. Finally, we determined vegetation heights by calculating cloud-to-cloud (C2C) distances between a reference point cloud, computed at the beginning of the time-lapse observation, and the respective point clouds measured in succession with an absolute error of 24.9–35.6 mm in depth direction. The calculated growth rates derived from RGB stereo images match the corresponding reference measurements, demonstrating the adequacy of our method in monitoring geometric plant traits, such as vegetation heights and growth spurts during the stand development using automated workflows. [ABSTRACT FROM AUTHOR]

In this paper we aim to show a proof-of-principle approach to detect and monitor weed management using glyphosate-based herbicides in agricultural practices. In a case study in Germany, we demonstrate the application of Sentinel-2 multispectral time-series data. Spectral broadband vegetation indices were analysed to observe vegetation traits and weed damage arising from herbicide-based management. The approach has been validated with stakeholder information about herbicide treatment using commercial products. As a result, broadband NDVI calculated from Sentinel-2 data showed explicit feedback after the glyphosate-based herbicide treatment. Vegetation damage could be detected after just two days following of glyphosate-based herbicide treatment. This trend was observed in three different application scenarios, i.e., during growing stage, before harvest and after harvest. The findings of the study demonstrate the feasibility of satellite based broadband NDVI data for the detection of glyphosate-based herbicide treatment and, e.g., the monitoring of latency to harvesting. The presented results can be used to implement monitoring concepts to provide the necessary transparency about weed treatment in agricultural practices and to support environmental monitoring. [ABSTRACT FROM AUTHOR]

Monitoring within-field crop variability at fine spatial and temporal resolution can assist farmers in making reliable decisions during their agricultural management; however, it traditionally involves a labor-intensive and time-consuming pointwise manual process. To the best of our knowledge, few studies conducted a comparison of Sentinel-2 with UAV data for crop monitoring in the context of precision agriculture. Therefore, prospects of crop monitoring for characterizing biophysical plant parameters and leaf nitrogen of wheat and barley crops were evaluated from a more practical viewpoint closer to agricultural routines. Multispectral UAV and Sentinel-2 imagery was collected over three dates in the season and compared with reference data collected at 20 sample points for plant leaf nitrogen (N), maximum plant height, mean plant height, leaf area index (LAI), and fresh biomass. Higher correlations of UAV data to the agronomic parameters were found on average than with Sentinel-2 data with a percentage increase of 6.3% for wheat and 22.2% for barley. In this regard, VIs calculated from spectral bands in the visible part performed worse for Sentinel-2 than for the UAV data. In addition, large-scale patterns, formed by the influence of an old riverbed on plant growth, were recognizable even in the Sentinel-2 imagery despite its much lower spatial resolution. Interestingly, also smaller features, such as the tramlines from controlled traffic farming (CTF), had an influence on the Sentinel-2 data and showed a systematic pattern that affected even semivariogram calculation. In conclusion, Sentinel-2 imagery is able to capture the same large-scale pattern as can be derived from the higher detailed UAV imagery; however, it is at the same time influenced by management-driven features such as tramlines, which cannot be accurately georeferenced. In consequence, agronomic parameters were better correlated with UAV than with Sentinel-2 data. Crop growers as well as data providers from remote sensing services may take advantage of this knowledge and we recommend the use of UAV data as it gives additional information about management-driven features. For future perspective, we would advise fusing UAV with Sentinel-2 imagery taken early in the season as it can integrate the effect of agricultural management in the subsequent absence of high spatial resolution data to help improve crop monitoring for the farmer and to reduce costs. [ABSTRACT FROM AUTHOR]

For more than 40 years, farmers in Germany have used the fertilization recommendation schema provided by the Association of German Agricultural Investigation and Research Institutions (VDLUFA) to quantify the required lime (CaO) demand of arable mineral soils. To be applicable as guidelines in practice, the results of 30 years of fertilization experiments that studied the correlation between crop yields and the actual soil pH, the soil texture, and the soil organic matter (SOM) content were finally condensed into a look-up table system. However, because the original experimental data are no longer accessible, the purpose of this study is to reconstruct the interaction between the three soil parameters and their appropriate lime demands. Therefore, the class-based, stepwise approach of the look-up table system is transferred into a continuous, stepless approach using mathematical models. Under the precondition to preserve the pH-, texture- and SOM-dependent CaO amounts recommended in the look-up system (n = 317) to the greatest extent possible, the algorithm was successful; more than 99% of their variability could be explained by the models. This adaptation helps to meet the accuracy of present-day requirements of precision farming. [ABSTRACT FROM AUTHOR]

The lack of soil data, which are relevant, reliable, affordable, immediately available, and sufficiently detailed, is still a significant challenge in precision agriculture. A promising technology for the spatial assessment of the distribution of chemical elements within fields, without sample preparation is laser-induced breakdown spectroscopy (LIBS). Its advantages are contrasted by a strong matrix dependence of the LIBS signal which necessitates careful data evaluation. In this work, different calibration approaches for soil LIBS data are presented. The data were obtained from 139 soil samples collected on two neighboring agricultural fields in a quaternary landscape of northeast Germany with very variable soils. Reference analysis was carried out by inductively coupled plasma optical emission spectroscopy after wet digestion. The major nutrients Ca and Mg and the minor nutrient Fe were investigated. Three calibration strategies were compared. The first method was based on univariate calibration by standard addition using just one soil sample and applying the derived calibration model to the LIBS data of both fields. The second univariate model derived the calibration from the reference analytics of all samples from one field. The prediction is validated by LIBS data of the second field. The third method is a multivariate calibration approach based on partial least squares regression (PLSR). The LIBS spectra of the first field are used for training. Validation was carried out by 20-fold cross-validation using the LIBS data of the first field and independently on the second field data. The second univariate method yielded better calibration and prediction results compared to the first method, since matrix effects were better accounted for. PLSR did not strongly improve the prediction in comparison to the second univariate method. [ABSTRACT FROM AUTHOR]