Search

A multi responsive Schiff base sensor L with thiophenol moiety was synthesized by the single-step condensation method. The structural analysis of the sensor was proposed by 1H-NMR, UV- Visible absorption, HRMS and FT-IR spectroscopy. Sensor L exhibited an instant appearance of yellow color on the addition of copper ions. Since copper gave an intense color change, therefore detailed studies were performed for copper sensing w.r.t. designed sensor L. Selectivity and sensitivity of sensor concerning copper metal ions were established by performing various UV-Visible spectroscopic and colorimetric studies. The 1:1 binding framework of the L-Cu2+ complex is confirmed by Job’s Plot and further supported by DFT studies. With the help of Benesi-Hildebrand equation, the detection limit and the association constants were found to be $3.15 \times 10^{-6}$ M and $1.16 \times 10^{4}$ M−1, respectively. In addition, sensor L was transferred onto solid substrates including silica and paper strips for establishing its utility in the onsite detection of copper ions. [ABSTRACT FROM AUTHOR]

This editorial summarizes the papers published in issue 16(4) (2021). The first paper adopts a higher order spatial autoregressive model with endogenous spatial weight matrices. The second paper investigates the existence of the law of one price using regional observations over time. The third paper develops an economic-theoretical model that goes against the common belief that the most productive individuals and firms agglomerate at the core. The fourth paper provides empirical evidence that merger and acquisition deals are more likely to occur between firms in culturally than in geographically contiguous countries. The fifth paper develops a spatial econometric estimator based on the indirect inference principle. The sixth paper examines the investment behaviour of First Nation governments through joint ventures. The seventh paper employs a spatial econometric model with an endogenous spatial weight matrix to construct intraregional input-output models. [ABSTRACT FROM AUTHOR]

This editorial summarizes the papers published in issue 17(1) (2022). This issue begins with a second editorial calling on researchers to publish replication results from previous studies. The first paper applies a spatiotemporal Bayesian hierarchical model for understanding the dynamics of second home ownership in Corsica. The second paper determines the optimal time to invest in a new airport using real options analysis. The third paper employs unit root tests to provide empirical evidence that environmental policy changes have not been effective up to now. The fourth paper provides empirical evidence that regional spillover effects should play a crucial role in the policy discussion about climate change. The fifth paper forecasts the direct impact of climate change on crop yields in the agricultural sector and the indirect impacts on other sectors of the Brazilian economy up to 2100. The sixth paper investigates whether the percentage of women in national parliaments positively affects public expenditures on social needs both internally and in neighbouring countries. The seventh paper sets out a general framework for store sales evaluation and prediction. [ABSTRACT FROM AUTHOR]

Estimating depth from RGB images is a long-standing ill-posed problem, which has been explored for decades by the computer vision, graphics, and machine learning communities. Among the existing techniques, stereo matching remains one of the most widely used in the literature due to its strong connection to the human binocular system. Traditionally, stereo-based depth estimation has been addressed through matching hand-crafted features across multiple images. Despite the extensive amount of research, these traditional techniques still suffer in the presence of highly textured areas, large uniform regions, and occlusions. Motivated by their growing success in solving various 2D and 3D vision problems, deep learning for stereo-based depth estimation has attracted a growing interest from the community, with more than 150 papers published in this area between 2014 and 2019. This new generation of methods has demonstrated a significant leap in performance, enabling applications such as autonomous driving and augmented reality. In this paper, we provide a comprehensive survey of this new and continuously growing field of research, summarize the most commonly used pipelines, and discuss their benefits and limitations. In retrospect of what has been achieved so far, we also conjecture what the future may hold for deep learning-based stereo for depth estimation research. [ABSTRACT FROM AUTHOR]

This paper investigates the practicality of an autonomous and resilient positional navigation using corner cube reflectors on the lunar surface. The proposed approach stands as an efficient navigation solution when the current system, e.g. GPS, is unavailable due to being attacked, jammed or spoofed by a third party. The paper provides a complete setup of the mathematical models using a nonlinear least squares algorithm and covariance analysis. A study is done that determines how the blockage of the Earth affects the proposed solution’s ability to perform positional navigation. Numerical simulations are presented to show the accuracy, performance and practicality of the proposed solution. The results of the proposed solution are compared with the results of an Earth-based ground station system that uses radio frequency to track the given satellite. The results show that the lunar reflector-based system generates more accurate results than the Earth-based ground station system. [ABSTRACT FROM AUTHOR]

Building and other construction assets constitute a significant part of a country's physical and economic infrastructure. According to several writers, the knowledge of reliable data of building and other construction assets of a specific country or region is a crucial element for the long-term management of these assets. Built capital stock statistics at the national or international levels have been available for most countries of the world, both developed and less developed ones, for some time, but construction infrastructure stock statistics at the disaggregated level are very scarce, even for most developed countries. Furthermore, the methodologies to produce the estimates of built capital stock, at the international level, do not consider countries' specificities. This paper discusses the methodologic issues for producing construction infrastructure stock statistics for Cape Verde, and makes estimates for the period 1980-2019. The paper outlines the Perpetual Inventory Method (PIM) used to produce capital estimation, data employed, and the assumptions made to estimate missing data. The paper analyses the level of the construction infrastructure stock estimates for Cape Verde, as well as their impact on the development pattern of the country's construction industry, and suggests how further studies can enhance our comprehension of the relationship between construction investment and economic growth and development. [ABSTRACT FROM AUTHOR]

This paper deals with the problem of process faults in the Lorenz system that can affect any of the system parameters and cause the system to exhibit various behaviors. In this paper, the homoclinic orbits in the Lorenz system are described and then the occurrence of process faults in the system is investigated that can cause a homoclinic explosion, bifurcation, change of fixed point, or even instability in the system. In such systems, where a small change in one of the parameters causes large changes in the behavior of the system, to prevent disaster in industrial systems and also to stop the propagation of faults in the system, the faults must be identified as soon as possible. In this paper, the states in the system are estimated by using a reduced-order observer, and the faults are detected. The purpose of this article is to recognize the change in behavior of this system in the face of this type of fault and to express the importance of timely detection and identification of faults in the system so as not to lead to failure and disaster in industrial systems. Finally, the effect of process fault, disturbance, and sensor fault are investigated simultaneously and the states and faults in the system are estimated. [ABSTRACT FROM AUTHOR]

Currently, SLAM (simultaneous localization and mapping) systems based on monocular cameras cannot directly obtain depth information, and most of them have problems with scale uncertainty and need to be initialized. In some application scenarios that require navigation and obstacle avoidance, the inability to achieve dense mapping is also a defect of monocular SLAM. In response to the above problems, this paper proposes a method which learns depth estimation by DenseNet and CNN for a monocular SLAM system. We use an encoder-decoder architecture based on transfer learning and convolutional neural networks to estimate the depth information of monocular RGB images. At the same time, through the front-end ORB feature extraction and the back-end direct RGB-D Bundle Adjustment optimization method, it is possible to obtain accurate camera poses and achieve dense indoor mapping when using estimated depth information. The experimental results show that the monocular depth estimation model used in this paper can achieve good results, and it is also competitive in comparison with the current popular methods. On this basis, the error of camera pose estimation is also smaller than traditional monocular SLAM solutions and can complete the dense indoor reconstruction task. It is a complete SLAM system based on monocular camera. [ABSTRACT FROM AUTHOR]

Statistical analysis of the time-to-event scenarios commonly involves the use of the exponential and Rayleigh distributions. However, the exponential distribution is constrained by its constant failure rate, while the Rayleigh distribution exhibits a growing (or increasing) failure rate. The linear failure rate distribution provides a broader perspective by encompassing both of these distributions, including the possibility of a non-increasing hazard function. In this paper, a new distribution is introduced, which could be considered as one of the major modifications to the linear failure rate distribution, known as the weighted linear failure rate distribution. The model proposed illustrates both monotonic and a known non-monotonic failure rate. This paper extensively explores the characteristics of the proposed distribution. It presents the maximum likelihood estimates for the unknown parameters and includes a simulation study. The analysis focuses on three real data sets obtained from the fields of musical education and engineering. By employing three decisive tools, it is observed that the current distribution provides a superior fit in comparison to several other widely recognized distributions. [ABSTRACT FROM AUTHOR]

Several experimental evidences and field data documented that zooplankton may alter its behavioral response in the presence of toxic phytoplankton, reducing its consumption to the point of starvation. This paper is devoted to the mathematical study of such interactions of toxic phytoplankton with grazer zooplankton. The non-toxic phytoplankton is assumed to adopt a density-dependent refuge strategy to avoid over-predation by zooplankton. Both groups of phytoplankton are assumed to suffer direct harm from anthropogenic toxicants, while zooplankton is affected indirectly by ingesting contaminated phytoplankton. We calibrate the proposed model with the field data from Talsari and Digha Mohana, India, and estimate some crucial model parameters consistent with the behavior of the observed data. Our results demonstrate that zooplankton grazing on toxic phytoplankton plays a key role in the emergence or mitigation of plankton blooms. We also highlight the system's potential to exhibit multiple stable configurations under the same ecological conditions. The plankton system experiences significant regime shifts, which are explored through various bifurcation scenarios, such as transcritical and saddle-node bifurcations. These shifts are influenced by changes in refuge capacity, species growth rates, and environmental carrying capacity. Furthermore, we incorporate environmental variations due to seasonal periodic or almost periodic changes, allowing the refuge parameter to be time-dependent. We observe that the forced system exhibits double periodic solutions. Moreover, stronger seasonal variations in the refuge pattern lead to irregular chaotic blooms. In conclusion, the results offer valuable insights into the sustainability of biodiversity, potentially shedding light on the origin of diverse plankton bloom phenomena. [ABSTRACT FROM AUTHOR]

Featured Application: This work presents the use of device-free wireless sensing for crowd size estimation on subway platforms. Dense urban environments pose significant challenges when it comes to detecting and measuring crowd size due to their nature of being free-flow environments containing many dynamic factors. In this paper, we use a wireless sensor network (WSN) to perform device-free crowd size estimation in a subway station. Our sensing solution uses the change in attenuation of the communication links between sensor nodes to estimate the number of people standing on the platform. In order to achieve this, we use the same attenuation information coming from the WSN to detect the presence of a rail vehicle in the station and compensate for the channel fading caused by the introduced rail vehicle. We make use of two separately trained regression models depending on the presence or absence of a rail vehicle to estimate the people count. The detection of rail vehicles occurred with a near-perfect accuracy. When evaluating the resulting estimation model on our test set, we achieved a mean average error of 3.567 people, which is a significant improvement over 6.192 people when using a single regression model. This demonstrates that device-free sensing technologies can be successfully implemented in dynamic environments by implementing detection techniques and using different regression models depending on the environment's state. [ABSTRACT FROM AUTHOR]

High-speed dual-motor electric drive tracked vehicles (DDTVs) have emerged as a research hotspot in the field of tracked vehicles in recent years due to their advantages in fuel economy and the scalability of electrical equipment. The emergency braking of a DDTV at high speed can lead to slipping or even yawing (which is caused by a large deviation of forces at each track directly), posing significant challenges to the vehicle's stability and safety. Therefore, the accurate real-time acquisition of critical driving parameters, such as the longitudinal force and vehicle speed, is crucial for the stability control of a DDTV. This paper developed a novel estimating algorithm of critical driving parameters for DDTVs equipped with conventional sensors such as rotary transformers at PMSMs and onboard accelerometers on the basis of their dynamics models. The algorithm includes a sensor signal preprocessing module, a longitudinal force estimation method based on a nonlinear observer, and a speed estimation method based on an adaptive Kalman filter. Through hardware-in-loop experiments based on a Speedgoat real-time target machine, the proposed algorithm is proven to estimate the longitudinal force of the track and vehicle speed accurately, whether the vehicle has stability control functions or not, providing a foundation for the further development of vehicle stability control algorithms. [ABSTRACT FROM AUTHOR]

This paper introduces a new statistical distribution called length biased quasi suja distribution (LBQS). It explores its properties, including moments, moment generating function(MGF), characteristic function(CF), harmonic mean, reliability, hazard rate and reverse hazard rate. Order statistics of the above distribution is obtained. Furthermore, the paper also examines various entropy which measures the randomness of system, like Renyi entropy and Tsalli's entropy. It also evaluates Bonferroni and Lorenz curves which are useful in measuring the inequality. It also discusses parameter estimation techniques specifically maximum likelihood estimation and likelihood ratio testing. Moreover, a simulation study has been conducted to demonstrate how well the distribution would perform in real-life situation. The validity of the distribution is also demonstrated with real-world data example of failure data, highlighting its potential for practical applications in data analysis. [ABSTRACT FROM AUTHOR]

This paper investigates how ancillary geographic data – in particular, information on land or assessor parcels – might be used to improve estimates for small area populations and population characteristics. It seeks to determine whether parcel land use codes can be used to reliably replicate population and housing distributions within small (subcounty) areas and whether other parcel attributes – in addition to land use – exhibit any explanatory power in replicating population and housing characteristics within these same places. The basis for this paper was Professor Barbara Buttenfield's service on the Census Scientific Advisory Committee, in which her working group explored the utility of administrative source data as an alternative or complement to federal survey data. This analysis highlights some of the benefits and complications of the incorporation of parcel data into geodemographic estimation, and the findings demonstrate that such a use is problematic but encouraging. [ABSTRACT FROM AUTHOR]

This paper focuses on the factor-augmented panel regression models with missing data and individual-varying factors. A so-called CCEM estimator for the slope coefficient is proposed and its asymptotic properties are investigated under some regularity conditions. Furthermore, a joint test statistic is constructed for serial correlation and heteroscedasticity in the idiosyncratic errors. Under the null hypothesis, the test statistic can be shown to be asymptotically chi-square distributed. Monte Carlo simulation results show that the proposed estimator and test statistic have desired performance in finite samples. [ABSTRACT FROM AUTHOR]

This paper introduces a panel threshold model with covariate-dependent and time-varying thresholds (PTCT), which extends the classical panel threshold model of Hansen, B. E. 1999. "Threshold Effects in Non-dynamic Panels: Estimation, Testing, and Inference." Journal of Econometrics 93: 345–68 to a framework with multiple covariate-dependent and time-varying thresholds. Based on the within-group transformation and Markov chain Monte Carlo (MCMC) technique, we develop methods for estimation and inference for threshold parameters in the proposed panel threshold model. We also suggest test statistics for threshold effect, threshold constancy, and for determining the number of thresholds. Monte Carlo simulations indicate that the estimation, inference and testing procedures work well in finite samples. Empirically, using the same data as in Hansen, B. E. 1999. "Threshold Effects in Non-dynamic Panels: Estimation, Testing, and Inference." Journal of Econometrics 93: 345–68 we revisit the cash flow/investment relationship and find quite different results. [ABSTRACT FROM AUTHOR]

This article explores the mathematical and statistical performances and connections of the two well-known ordinary least-squares estimators (OLSEs) and best linear unbiased estimators (BLUEs) of unknown parameter matrices in the context of a multivariate general linear model (MGLM) for regression, both of which are defined under two different optimality criteria. Tian and Zhang [38] once collected a series of existing and novel identifying conditions for OLSEs to be BLUEs under general linear models: On connections among OLSEs and BLUEs of whole and partial parameters under a general linear model, Stat. Probabil. Lett., 112 (2016), 105–112. In this paper, we show how to extend this kind of results to multivariate general linear models. We shall give a direct algebraic procedure to derive explicit formulas for calculating the OLSEs and BLUEs of parameter spaces in a given MGLM, discuss the relationships between OLSEs and BLUEs of parameter matrices in the MGLM, establish many algebraic equalities related to the equivalence of OLSEs and BLUEs, and give various intrinsic statistical interpretations about the equivalence of OLSEs and BLUEs of parameter matrices in a given MGLM using some matrix analysis tools concerning ranks, ranges, and generalized inverses of matrices. [ABSTRACT FROM AUTHOR]

Due to the emergence of social networking platforms, a large number of users around the world are being part and partial of this platform. At a fraction of the time users on social media are communicating digital files in the form of text, video, images, voice and music which ultimately generates big data. The matter of interest is to estimate precisely the average file size at time duration (occasion). The time may hours or days or months. This paper presents a sample-based methodology to deal with mean size estimation of digital communication content spreading on a social media platform. An estimator is suggested using a random sample from big data and its properties are derived. A simulation method is suggested that computes the confidence interval (CI) for the prediction of précised range of digital file size. The proposed method produces an optimal confidence interval at the suitable choice of constant. These estimated confidence intervals can be used for developing α-control charts for constant monitoring of the growth in file size in social media storage at the data centre. If the growth of mean digital file size crosses the upper limit then additional storage infrastructure is needed at the administration level of the social media site. One can generate machine learning algorithms proposed method for monitoring the growth of average digital file size over time duration. [ABSTRACT FROM AUTHOR]

This study investigates the correlation between the California Bearing Ratio (CBR) and the Dynamic Cone Penetrometer (DCP) for subgrade soil analysis. The paper aims to provide practical equations for predicting CBR values from DCP test results, therefore enhancing the efficiency of soil assessments in engineering practice. By analyzing test data and proposing correlations for different soil groups, the study introduces recalibrated correlations that demonstrate high accuracy in predicting CBR values. The newly proposed equations offer reliable predictions with R 2 values of 0.89, 0.92, and 0.94 for clean sand, silty sand or sandy silt, and cohesive soil, respectively. These correlations serve as valuable tools for engineers, enabling rapid and accurate CBR estimations for improved decision-making in various engineering projects. [ABSTRACT FROM AUTHOR]

Causal inference involves determining whether a treatment (e.g., an education program) causes a change in outcomes (e.g., academic achievement). It is well-known that causal effects are more challenging to estimate than associations. Over the past 50 years, the potential outcomes framework has become one of the most widely used approaches for defining, identifying, and estimating causal effects. In this paper, we review the potential outcomes framework with a focus on potential outcomes notation to define individual and average causal effects. We then show how three canonical assumptions, Unconfoundedness, Positivity, and Consistency, may be used to identify average causal effects. The identification results motivate methods for estimating causal effects in practice, which include model-based estimators, such as regression, inverse probability weighting, and doubly robust estimation, and procedures that target covariate balance, such as matching and stratification. Examples and discussion are grounded in the context of a running example of a study aimed at assessing the causal effect of receipt of special education services on 5th grade mathematics achievement in school-aged children. Practical considerations for education research are discussed. [ABSTRACT FROM AUTHOR]

This paper presents the overview and rationale behind the Decoder-Side Depth Estimation (DSDE) mode of the MPEG Immersive Video (MIV) standard, using the Geometry Absent profile, for efficient compression of immersive multiview video. A MIV bitstream generated by an encoder operating in the DSDE mode does not include depth maps. It only contains the information required to reconstruct them in the client or in the cloud: decoded views and metadata. The paper explains the technical details and techniques supported by this novel MIV DSDE mode. The description additionally includes the specification on Geometry Assistance Supplemental Enhancement Information which helps to reduce the complexity of depth estimation, when performed in the cloud or at the decoder side. The depth estimation in MIV is a non-normative part of the decoding process, therefore, any method can be used to compute the depth maps. This paper lists a set of requirements for depth estimation, induced by the specific characteristics of the DSDE. The depth estimation reference software, continuously and collaboratively developed with MIV to meet these requirements, is presented in this paper. Several original experimental results are presented. The efficiency of the DSDE is compared to two MIV profiles. The combined non-transmission of depth maps and efficient coding of textures enabled by the DSDE leads to efficient compression and rendering quality improvement compared to the usual encoder-side depth estimation. Moreover, results of the first evaluation of state-of-the-art multiview depth estimators in the DSDE context, including machine learning techniques, are presented. [ABSTRACT FROM AUTHOR]

This paper analyses the development of private actions for damages as a significant pillar of private enforcement of EU competition law and discusses the quantification and estimation of harm. Since the adoption of the EU Directive 2014/104/EU on Antitrust Damages Actions, private enforcement in Europe has undergone crucial clarifications in the case law of EU courts, yet the critical issue of quantifying damages in private actions has only recently been addressed by the Court of Justice of the European Union (CJEU). This paper takes a closer look at the recent ruling in the Tráficos Manuel Ferrer case (C-312/21) and assesses the implications of that case law for private enforcement proceedings. Concerning the allocation of procedural costs, this judgment has established that injured parties may be required to bear a cost risk, even if they are partially successful. This finding needs further reflection in the context of consumer claims for damages, as it is susceptible to add an additional cost burden on plaintiffs. The second intricate finding concerns the relation between the ability of national courts to estimate damages and the exhaustion of evidence disclosure. Taking the example of Spain, the paper advocates for the specific inclusion of the principle of proportionality when determining harm in private actions for damages and especially in cases involving consumers or smaller harmed parties. [ABSTRACT FROM AUTHOR]

An application of moving-horizon strategy for nonlinear systems with possible outliers in measurements is addressed. With the increased success of movinghorizon strategy in the state estimation for linear systems with outliers acting on the measurement, investigating the nonlinear approach is highly required. In this paper we applied the nonlinear version which has been presented in the literature in term of discrete-time linear time-invariant systems, where the applied strategy considers minimizing a least-squares functions in which each measure possibly contaminated by outlier is left out in turn and the lowest cost is propagated. The moving horizon filter effectiveness as compared with the extended Kalman filter is shown by means of simulation example and estimation error comparison. The moving horizon filter shows the feature of resisting outliers with robust estimation. [ABSTRACT FROM AUTHOR]

In this paper, we study the evasion game of high speed evader involving two pursuers and a single evader with geometric constraints on the control parameters of the players in the plane. The game is described by linear equations. Evasion is said to be possible if the state of the evader doesn’t coincide with the state of any pursuer for all time. We construct an evasion strategy for the evader which ensure completion the evasion game for any initial positions of players. In addition, we introduce a new concept of approach times and demonstrate that the number of approach times does not exceed 3. [ABSTRACT FROM AUTHOR]

A recent paper introduced the interpolating family (IF) of distributions, and they also derived various mathematical properties of the family. Some of the most important properties discussed were the integer order moments of the IF distributions. The moments were expressed as an integral (which were not evaluated) or as finite sums of the beta function. In this paper, more general expressions for moments of any integer order or any real order are derived. Apart from being more general, our expressions converge for a wider range of parameter values. The expressions for entropies are also derived, the maximum likelihood estimation is considered and the finite sample performance of maximum likelihood estimates is investigated. [ABSTRACT FROM AUTHOR]

In the count data set, the frequency of some points may occur more than expected under the standard data analysis models. Indeed, in many situations, the frequencies of zero and of some other points tend to be higher than those of the Poisson. Adapting existing models for analyzing inflated observations has been studied in the literature. A method for modeling the inflated data is the inflated distribution. In this paper, we extend this inflated distribution. Indeed, if inflations occur in three or more of the support point, then the previous models are not suitable. We propose a model based on zero, one, ... , and k inflated points with probabilities w 0 , w 1 , ... , and w k , respectively. By choosing the appropriate values for the weights w 0 , ... , w k , various inflated distributions, such as the zero-inflated, zero–one-inflated, and zero–k-inflated distributions, are derived as special cases of the proposed model in this paper. Various illustrative examples and real data sets are analyzed using the obtained results. [ABSTRACT FROM AUTHOR]

Capturing the ‘mutual gaze’ of people is essential for understanding and interpreting the social interactions between them. To this end, this paper addresses the problem of detecting people Looking At Each Other (LAEO) in video sequences. For this purpose, we propose LAEO-Net++, a new deep CNN for determining LAEO in videos. In contrast to previous works, LAEO-Net++ takes spatio-temporal tracks as input and reasons about the whole track. It consists of three branches, one for each character's tracked head and one for their relative position. Moreover, we introduce two new LAEO datasets: UCO-LAEO and AVA-LAEO. A thorough experimental evaluation demonstrates the ability of LAEO-Net++ to successfully determine if two people are LAEO and the temporal window where it happens. Our model achieves state-of-the-art results on the existing TVHID-LAEO video dataset, significantly outperforming previous approaches. Finally, we apply LAEO-Net++ to a social network, where we automatically infer the social relationship between pairs of people based on the frequency and duration that they LAEO, and show that LAEO can be a useful tool for guided search of human interactions in videos. [ABSTRACT FROM AUTHOR]

The paper presents a methodology of preparing and conducting airborne gravimetry survey using an inertial measuring unit (IMU) or strapdown inertial navigation system as airborne gravimeter. We also discuss the key aspects of developing appropriate postprocessing algorithms and software and their application to gravimeter raw data processing. Solving the strapdown inertial airborne gravimetry problem, we use readings of the IMU sensors (accelerometers and gyroscopes) as primary information. The second equally important source of information is raw (pseudorange, Doppler pseudorange rate, and carrier phase) measurements from the GNSS receivers on board the aircraft and on the ground. The developed methodology, algorithms, and practical recommendations presented in the paper are based on the authors' long-term experience in airborne gravimetry. [ABSTRACT FROM AUTHOR]

This paper proposes a deep learning framework to design distributed compression strategies in which distributed agents need to compress high-dimensional observations of a source, then send the compressed bits via bandwidth limited links to a fusion center for source reconstruction. Further, we require the compression strategy to be progressive so that it can adapt to the varying link bandwidths between the agents and the fusion center. Moreover, to ensure scalability, we investigate strategies that depend only on the local channel state information (CSI) at each agent. Toward this end, we use a data-driven approach in which the progressive linear combination and uniform quantization strategy at each agent are trained as a function of its local CSI. To deal with the challenges of modeling the quantization operations (which always produce zero gradients in the training of neural networks), we propose a novel approach of exploiting the statistics of the batch training data to set the dynamic ranges of the uniform quantizers. Numerically, we show that the proposed distributed estimation strategy designed with only local CSI can significantly reduce the signaling overhead and can achieve a lower mean-squared error distortion for source reconstruction than state-of-the-art designs that require global CSI at comparable overall communication cost. [ABSTRACT FROM AUTHOR]

Ridge Estimation (RE) is a widespread method to overcome the problem of collinearity defining a class of estimators depending on the non-negative scalar parameter k. A great number of papers focus on the estimation of this biasing parameter. Traditionally, the mean squared error criterion is used to compare the performance of the different proposed estimators. However, the minimization of the mean squared error (MSE) does not always guarantee the mitigation of collinearity, meaning it is possible, for example, to obtain a variance inflation factor (VIF) higher than 10 for the k that minimizes the MSE. In this paper, we propose the VIF criteria to select the biased ridge parameter. A Monte Carlo simulation is presented with results that support this idea. Also, two real life empirical applications are used to illustrate the contribution of this paper. [ABSTRACT FROM AUTHOR]

This paper proposes a new probability model called as Maxwell-Boltzmann-Exponential (MBE) distribution. The MBE distribution arises as a mixture distribution of the Maxwell-Boltzmann and exponential distributions. The statistical properties of the distributions are studied and obtained in closed-form expressions. Three methodologies are assessed and compared for the estimation of parameters in the MBE distribution. The MBE regression model is defined, with the proposed regression model being an alternative to the gamma regression model for response variables that are extremely right-skewed and bimodal. Two real data sets are used to demonstrate the applicability of the proposed models against the existing models. [ABSTRACT FROM AUTHOR]

In this research paper, we present an innovative investigation into a novel two parameter semicircular distribution, termed the "stereographic semicircular Erlang distribution," which is constructed using the inverse stereographic projection (ISP) technique. This distribution serves as advancement over the existing stereographic semicircular exponential distribution. We delve into essential mathematical properties of this distribution and execute a simulation study to estimate its parameter values. Furthermore, we perform an empirical analysis utilizing a dataset comprising posterior corneal curvature measurements extracted from the eyes of 23 patients. This empirical assessment is designed to evaluate the adaptability and potential applicability of the proposed distribution within the realm of ophthalmology in medical science. [ABSTRACT FROM AUTHOR]

In this paper, we introduce a new distribution called beta generated slash distribution by applying the slash construction idea to the existing beta distribution of first kind. The statistical properties of the distribution such as moments, skewness, kurtosis, median, moment generating function, mean deviations, Lorenz and Bonferroni curves, order statistics, Mills ratio, hazard rate functions have been discussed. The location-scale form of the beta generated slash distribution is also established. The hazard rate function is seen to assume different shapes depending upon the values of the parameters. The method of maximum likelihood is used to estimate the unknown parameters of beta generated slash distribution and a simulation study is conducted to check the performance of these estimates. Finally, the proposed distribution is applied to a real-life data set on failure times and the goodness-of-fit of the fitted distribution is compared with four other competing distributions to show its flexibility and advantage particularly in modeling heavy tailed data sets. [ABSTRACT FROM AUTHOR]

In this paper, an on-line closed-loop identification of mainly mass and inertia of an under-actuated aerial vehicle, namely a quadrotor acting as an aerial manipulator, is presented. Being treated as a rigid body, only one set of eighteen- or six tri-axial linear accelerometers is used to facilitate such estimation. Force and torque disturbances acting upon the vehicle during identification are also estimated which will refine the overall estimation quality of the unknown parameters. Namely, recursive linear and nonlinear least squares methods are used to obtain initial and refined estimations, respectively. Random disturbances are introduced to the closed-loop system to ensure enough excitation of the overall system. Issues related to identifiability, stability and performance are discussed. Since the proposed method depends on general kinematical and dynamical analyses of motion, it is claimed that the presented method will be also applicable to a wider range of, mainly, aerial vehicles. [ABSTRACT FROM AUTHOR]

Emotion recognition is a critical component of affective computing. Training accurate machine learning models for emotion recognition typically requires a large amount of labeled data. Due to the subtleness and complexity of emotions, multiple evaluators are usually needed for each affective sample to obtain its ground-truth label, which is expensive. To save the labeling cost, this paper proposes an inconsistency-based active learning approach for cross-task transfer between emotion classification and estimation. Affective norms are utilized as prior knowledge to connect the label spaces of categorical and dimensional emotions. Then, the prediction inconsistency on the two tasks for the unlabeled samples is used to guide sample selection in active learning for the target task. Experiments on within-corpus and cross-corpus transfers demonstrated that cross-task inconsistency could be a very valuable metric in active learning. To our knowledge, this is the first work that utilizes prior knowledge on affective norms and data in a different task to facilitate active learning for a new task, even the two tasks are from different datasets. [ABSTRACT FROM AUTHOR]

When data exhibit a high frequency of small to medium values and a low frequency of large values, fitting a classical distribution might fail. This is why spliced models defined from different distributions on distinct intervals are proposed in the literature. In contrast to the intensive study of two-spliced distributions, the case with more than two components is scarcely approached. In this paper, we focus on three-spliced distributions and on their ability to improve the modeling of extreme data. For this purpose, we consider a popular insurance data set related to Danish fire losses, to which we fit several three-spliced distributions; moreover, the results are compared to the best-fitted two-spliced distributions from previous studies. [ABSTRACT FROM AUTHOR]

In this paper, we consider the on-line estimation of current subsequences for Partially Observable P-time Petri Nets and their starting markings on a sliding horizon composed of steps defined by two successive occurrences of observable transition firings. We propose a general strategy composed of two phases: Phase 1 exploits a simplification of the P-time Petri net under the form of a Timed Petri net; considering a candidate count vector and the relevant starting marking proposed at Phase 1, Phase 2 makes a schedulability analysis by building a system of relations which can be represented by an acyclic conflict-free computation graph. The complete approach avoids the generation of sets which is generally time and space consuming, and provides an optimal solution for each subproblem by using efficient standard tools. [ABSTRACT FROM AUTHOR]

While the evolution of state uncertainties from Gaussian to non-Gaussian is well understood in geocentric orbits, the only data product made publicly available by the United States Space Force, the Two-Line Element, does not include state uncertainties at all. With a new international focus on cislunar space situational awareness, it is useful to determine how this complex dynamical environment influences trajectory uncertainties and the resultant implications for data association, orbit determination, and force model algorithms. This paper utilizes a new tensor eigenpair measure of nonlinearity (TEMoN) to quantify the nonlinearity of gravitational forces in the cislunar regime. This measure is then compared with various characterizations of Gaussian distributions to determine the value of TEMoN at which trajectory uncertainties become non-Gaussian. This novel advancement combines the cumulative effect of time and physical location of the trajectory into one value. The result is a predictive method that obviates highly parameterized Monte Carlo runs, and allows an objective assessment of how sensor tasking cadence, measurement uncertainty, and force model selection can be balanced to enable nascent cislunar space situational awareness capabilities with legacy space surveillance network assets. [ABSTRACT FROM AUTHOR]