Search

Nowadays, what captures consumers' primary attention is how to purchase electric vehicles with long range and desirable price. Lightweight construction stands as one of the most effective approaches for prolonging range and lowering costs. As a consequence, it is particularly imperative to undertake lightweight design optimization for the battery bracket of new energy vehicles by applying 3D printing technology. To actualize this goal, Rhino software was initially employed for 3D modeling to design the battery bracket system for a pure electric vehicle in China. Subsequently, topology optimization design of the battery bracket was carried out by adopting Altair Inspire software. Last but not least, manufacturing and assembly inspection were completed using a 3D printer. The results show that the maximum displacement of the battery lower tray bracket after topology optimization is 3.20 mm, which is slightly higher than before, but still relatively small. The maximum Mises equivalent stress rose to 240.7 MPa post-optimization, but brought about a uniform stress distribution at the bottom of the bracket. In comparison, the minimum factor of safety met design requirements at 1. The mass was lessened to 0.348 kg, representing a 49.2% decrease in comparison with pre-optimization levels. The 3D-printed bracket was fabricated by employing a 3D printer, thereby achieving the aforementioned mass abatement. The battery pack parts exhibited a bright surface with low roughness and no discernible warping or deformation defects. As revealed by the assembly results, the components of the battery pack bracket are tightly coordinated with each other, with no evident assembly conflicts, revealing that the dimensional accuracy and fit of the completed parts meet production requirements. These findings lay solid groundwork for the mass production of high-performance battery pack brackets. [ABSTRACT FROM AUTHOR]

Interest towards electric vehicle adoption is on the rise due to the lower running and maintenance cost it offers, along with zero tailpipe emissions. Range anxiety is one of the only concern that affects the adoption of electric vehicles. The state of charge of the traction battery pack has to be accurately determined and provided to the user to avoid range anxiety. Minute battery parameters has to be considered to improve the accuracy of the state of charge determination. In order to overcome the problem of range anxiety, an innovative strategy that takes into account how vibrations affect the performance of EV batteries is developed in this research. By doing this, the state of charge estimation precision is improved and thereby raises the driver's faith in electric vehicles. The impacts and vibrations felt on the traction battery pack during driving would lead to heat generation. The heat generated is found to be highest when the vibrations resonate at the natural frequencies of the traction battery pack. The natural frequency of the battery pack is considered when the battery is kept in the battery chamber of the two-wheeler electric vehicle. The vibrations at natural frequency produces heat which is accounted for when the state of charge is determined. To obtain accurate state of charge estimation, a Kalman filter-based approach is used. The Kalman filter-based estimation uses the conventional methods which are the open circuit voltage method and the Coulomb counting method to improve the estimation process along with the consideration of the heat component due to vibrations and impact. The vibration analysis is performed using MATLAB, while the state of charge determination is implemented in hardware and the Kalman estimation done using Python. The system is modelled on an electric two-wheeler platform and the testing is done to compare the state of charge accuracy of the open circuit voltage method, the Coulomb counting method and the Kalman filter-based estimation approach. The inclusion of the vibrational heat analysis for State of Charge estimation in the hardware testing of the electric two-wheeler provides an accurate state of charge value. [ABSTRACT FROM AUTHOR]

Lithium‐ion cell chemistries are favored in the automotive sector, as they enable electric vehicles (EVs) to compete with traditional gasoline‐powered vehicles in terms of performance, range, and cost. The life and performance of these packs depend upon the Battery management system which monitors and controls the pack. The modeling, simulation, and analysis of a lithium‐ion battery pack that closely resembles an actual automobile battery are the focus of this paper. Real cells that are commercially available and specifically developed for automotive applications are modeled in the simulation environment. The cell characterization and formation of pack topology with heat exchange are addressed. A commercial electric car's power train model and EV dynamics are used in the simulation environment to test the modeled battery pack over various drive cycles. The performance analysis is upscaled by considering different aspects like resistive forces while driving, ambient temperature, initial conditions while the vehicle starts, etc. The battery manufacturer can verify the battery's performance under different load conditions, with a high degree of similarity to real‐world scenarios. The simulations are conducted on MATLAB/Simulink 2021b software. [ABSTRACT FROM AUTHOR]

Electric powered vehicle popularity gives us better option for reducing the hydrocarbon emissions for the clean environment and will help to minimizing the troposphere of ozone degradation. Evs that are powered by batteries are becoming more commonplace worldwide. A strong Battery Management System (BMS) is essential for the reliable and safe operation of batteries, which have been widely used in many large power applications, including EVs and hybrid EVs. Their optimal plan and the management are significant for safe and beneficial tasks. This review paper examined with about the oldest kind of battery-latest powered battery (Pb-acid battery) and the most recent innovation of battery, lithium-ion battery. The present paper deals about the recent improvement in three important areas like Battery pack shape, different battery material and thermal behaviour which covered main challenges for EVs operation. [ABSTRACT FROM AUTHOR]

The fire hazard resulting from the thermal runaway of lithium-ion batteries constitutes an severe threat for electric vehicles, and discovering an effective and prompt method for suppressing battery fire is still challenging. In this paper, a finite volume model for simulating the process of extinguishing lithium-ion battery fire was established, and the effect of water mist on suppressing battery fire was studied. It was found that the larger the droplet size, the greater the initial spray velocity, or the higher the nozzle height, the worse the fire extinguishing effect. The larger number of nozzles, the greater the spray flow, or the earlier the spray start time, the better the fire extinguishing effect. As the spray duration increased, the suppression effect at the center module gradually increased. When the water mist nozzle faced the center point of the module, the temperature rise was much lower than at other angles, and the fire extinguishing performance was the most effective. [ABSTRACT FROM AUTHOR]

The electric vehicles are not completely emission-free. The vehicles consume power and the power generation processes involve carbon emissions, resulting in indirect vehicle usage carbon emissions. A use-phase carbon emissions assessment can help electric vehicle designers and manufacturers analyze the onboard carbon footprint and mitigate vehicle-related carbon emissions through energy consumption optimization. In this article, we focus on the use-phase carbon footprint based on the energy losses in electric vehicle battery packs. A battery pack energy loss model is established to examine the carbon footprint of four main subsystems of the battery pack, including the energy storage system, thermal management system, and battery junction box. We use the proposed method to evaluate the battery pack use-phase carbon emissions in four different cities from four main continents. The results show that the highest emissions appear in Tokyo (436.2 kgCO 2) due to the relatively high greenhouse gas factor on the grid, the London has the lowest 207.5 kgCO 2 emissions due to the massive adoption of sustainable energy during power generation. With a similar high greenhouse gas factor, but Sydney shows lower emissions (347.5 kgCO 2) compared to Tokyo, which illustrates the closer the annual average temperature to the battery suitable operation range, the lower energy loss happens inside the battery pack due to the low thermal management load and resistance energy loss in the cells. This electric vehicle has the highest energy loss rate (20.8%) in New York, 343.6 kgCO 2 emissions, and the highest thermal management system energy losses show the high seasonal temperature difference causing the high thermal management load to maintain the battery temperature. The proposed method can be used for different battery pack configurations and vehicle uses, providing researchers with a robust and versatile use-phase carbon emissions assessment strategy. • A battery pack use-phase carbon footprint assessment strategy is proposed. • The carbon emissions for four battery pack subsystems are calculated. • Temperature has the greatest impact on the battery pack carbon emissions. [ABSTRACT FROM AUTHOR]

• The heat generation model for cylindrical Li-ion battery was built. • A liquid immersion cooling battery pack containing 60 batteries were established. • At 2C discharge rate, 0.5 L/min flow rate was recommended. • The battery pack can address localized high-rate discharge events (4.5C or 6.5C). • Liquid immersion cooling BTMSs have great heat dissipation performance. With the increasingly severe challenges of the thermal management of battery packs for electric vehicles, the liquid immersion cooling technology has gradually attracted more attention due to its superior characteristics such as high heat dissipation efficiency, well temperature uniformity and low risk of thermal runaway. To investigate the heat transfer characteristics of the liquid immersion cooling BTMSs, the 3D model of the 60-cell immersion cooling battery pack was established, and a well-established heat generation model that leveraged parameters derived from theoretical analysis and experiments was incorporated into the 3D simulation to analyze the thermal characteristics of battery pack. The simulation results showed that under the discharging rate of 2C, even with the lowest coolant flow rate in this work (0.2 L/min), no localized abnormal overheating within the battery pack was observed, and the highest temperature was 34.22 °C. The temperature uniformity within the battery pack improved with the increase of the coolant flow rate. It was recommended to maintain a flow rate above 0.5 L/min to ensure a temperature difference below 5 °C. The experimental apparatus of the immersion cooling battery pack was also developed to explore the heat dissipation and temperature uniformity at 2C discharge rate. The simulation results were in well agreement with the experimental results, with the deviation less than 0.43 °C when the flow rate exceeded 0.6 L/min. The effect of the localized high-rate discharge events (4.5C and 6.5C) at different battery pack locations on temperature distribution and uniformity was further discussed based on the verified 3D model. The results suggested that liquid immersion cooling systems offered promising potential for achieving both efficient heat dissipation and preventing thermal runaway in battery packs. [ABSTRACT FROM AUTHOR]

This comprehensive study delves deeply into the realm of electric vehicle (EV) battery temperature management, with a central focus on optimizing cooling systems using ethylene glycol solutions. The research rigorously examines the interplay between ethylene glycol concentrations and cooling methods on EV battery performance. ANSYS and MATLAB along with analytical methods were used for this project. Key findings reveal a consistent inverse relationship between ethylene glycol concentration and cooling efficiency, favoring lower concentrations. Indirect cooling, achieved with a 30% ethylene glycol solution, emerges as the most effective method, while direct cooling proves less efficient. Notably, mineral oil cooling at 0.04 m/s outperforms air cooling, albeit with higher energy consumption. Consequently, air cooling is recommended for smaller battery packs due to its lower power demand. The study also underscores the importance of selecting ethylene glycol concentrations based on environmental conditions, advocating lower concentrations for warmer climates and higher concentrations for colder regions. In summary, this research significantly advances EV technology by advocating for customized cooling system designs that consider environmental factors, battery specifications, and practical implementation. It provides a critical roadmap for enhancing EV thermal management systems' efficiency and sustainability. Further research is needed to explore the long-term effects of diverse cooling methodologies on battery longevity and performance within the practical constraints of EV integration. • Cooling effectiveness increases with lower concentration. • Indirect cooling outperforms direct methods. • Higher coolant flowrate enhances heat extraction but requires more energy. • A 50% ethylene glycol solution is suitable for most weather conditions. [ABSTRACT FROM AUTHOR]

Complex environments and variable working conditions lead to irreversible attenuation of battery pack capacity in electric vehicles (EVs). Online capacity estimation is of great significance for battery pack management and maintenance. This work proposes a state-of-health (SOH) attenuation model considering driving mileage and seasonal temperature for battery health estimation. Firstly, a variable forgetting factor recursive least square (VFFRLS) algorithm is proposed for battery model parameter identification. It adaptively adjusts the forgetting factor according to current fluctuations. Then, an extended Kalman-particle filter (EPF) algorithm is proposed for online capacity estimation. In addition, a battery pack SOH attenuation model is constructed considering seasonal temperature and driving mileage. Finally, the performance of the proposed model and algorithm is verified with nine months of actual vehicle data. The experimental results show that the proposed parameter identification and capacity estimation algorithm can accurately estimate the model parameters and capacity. The average capacity of the battery module decreases with the total mileage. The compensation of monthly driving mileage and ambient temperature factors effectively improves the accuracy of SOH model. • A SOH attenuation model considering temperature and mileage is proposed for EVs. • A variable forgetting factor RLS is proposed for battery parameter identification. • Multidimensional equation of state is constructed for capacity estimation with EPF. • Nine month real vehicle data are used to validate the proposed algorithm and model. [ABSTRACT FROM AUTHOR]

Power batteries are treated as heart of the electrical vehicles and they release huge amount of heat throughout both charging and discharging processes. Hence Battery Thermal Management System (BTMS) is designed in order to control maximum temperature rise within a battery pack and to maintain even temperature distribution among the cells for increasing life span, efficiency and safety of the batteries. With an enticing characteristic feature such as low parasitic power, low weight, uniform temperature distribution among cells, passive thermal management system namely Phase Change Material (PCM) is justified as an efficient BTMS in recent years. The current work begins with the introduction of Hybrid Thermal Management System combined with PCM for enhancing cooling performance of BTMS. In addition to that, some of the thermal conductivity enrichment techniques for PCM (i.e. the usage of thermal conductive particles, cellular foams, encapsulation) are summarized. Research studies which involves various key parameters such as cell spacing, mass of PCM, thickness of PCM, specific heat capacity and thermal conductivity influencing the performance of systems are reviewed. Eventually, the results of several studies on PCM cooling are proposed in the conclusion part based on analysis of previous works. • Battery thermal management system of PCM assisted liquid cooling provides uniform temperature distribution among the cells. • Addition of high thermal conductive particles into the PCM helps in enhancing thermal conductivity of PCM. • Metal foams have a continuous skeleton structure with large thermal conductivity, and high structural strength. • Addition of high thermal conductive particles into PCM,CPCM which incorporates porous foams to PCM exhibits more conductivity. [ABSTRACT FROM AUTHOR]