Search

Haze aerosols have a profound impact on air quality and pose serious health risks to the public. Due to its geographical location, Beijing experienced haze events in the spring of 2024. Lidar is an active remote sensing technology with a high spatiotemporal resolution and the ability to classify aerosols, and it is essential for effective haze monitoring. This study utilizes fluorescence–Raman–Mie polarization lidar with an emission wavelength of 355 nm, employing the δ p - G f method based on the particle depolarization ratio at 355 nm ( δ p 355 ) and the fluorescence capacity ( G f ), and combines meteorological data and backward-trajectory analysis to observe and classify low-altitude haze aerosols in Beijing during the spring of 2024. Notably, a mining dust event with strong fluorescence backscatter was detected. The haze aerosols were categorized into three types: pollution aerosols, desert dust, and mining dust. Their optical properties were summarized and compared. Desert dust showed a particle depolarization ratio range of 0.23–0.39 and a fluorescence capacity range from 0.18 × 10−4 to 0.63 × 10−4. Pollution aerosols had a larger fluorescence capacity but a lower depolarization ratio compared to desert dust, with a fluorescence capacity ranging from 0.55 × 10−4 to 1.10 × 10−4 and a depolarization ratio ranging from 0.10 to 0.17. Mining dust shared similar depolarization characteristics with desert dust but had a larger fluorescence capacity, ranging from 0.71 × 10−4 to 1.23 × 10−4, with a depolarization ratio range of 0.30–0.39. This study validates the effectiveness of the δ p 355 - G f method in classifying low-altitude haze aerosols in Beijing. Additionally, it offers a new perspective for more detailed dust classification using lidar. Furthermore, utilizing the δ p 355 - G f classification method and the δ p 355 - G f distributions of three typical aerosol samples, we developed a set of equations for the analysis of mixed aerosols. This method facilitates the separation and fraction analysis of aerosol components under various mixing scenarios. It enables the characterization of variations in the three types of haze aerosols at different altitudes and times, offering valuable insights into the interactions between desert dust, mining dust, and pollution aerosols in Beijing. [ABSTRACT FROM AUTHOR]

Complexly distributed aerosol particles have significant impacts on climate and environmental changes. As one of the vital atmospheric power sources, the wind field deeply affects the distribution and transport of aerosol particles. For a more comprehensive investigation of the aerosols flux and transport mechanism, two retrieval methods of aerosol optical properties (backscatter coefficient and extinction coefficient at 1550 nm) from coherent Doppler lidar (CDL) observation are proposed in this paper. The first method utilizes the calculated aerosol backscatter coefficient (532 nm) from Mie-scattering lidar datasets and the iterative Fernald method to retrieve aerosol optical property profiles during joint measurements with CDL and Mie-scattering lidar. After verifying the correctness of the first method compared with AERONET datasets, we proposed the second retrieval method. Using the forward integral Fernald method with near-ground reference aerosol extinction coefficient calculated by atmospheric visibility, aerosol optical properties at 1550 nm could be obtained. Thirty-six-day joint measurements with two lidars were specially designed and conducted to verify the correctness of these retrieval methods. The validation results of these two methods indicate great performances, where the mean relative errors are 0.0272 and 0.1656, and the correlation coefficients are 0.9306 and 0.9197, respectively. In conclusion, the feasibility of these two retrieval methods extends the capability of CDL to detect aerosol optical properties and also provides a possibility to observe the aerosol distribution and transport process comprehensively, which is a great promotion of aerosol transport studies development. [ABSTRACT FROM AUTHOR]

[Display omitted] • Dual-wavelength-excitation fluorescence spectra detection of aerosol stream. • Fluorescence signals from two bands received by bifurcated fiber bundle. • Self-developed combined spectrometer with time-sharing detection. • A 32-channel PMT as the detector, resolution of 6 nm/channel for both bands. • Detection of two band fluorescence spectra of six kinds of samples. We developed a dual-wavelength-excitation aerosol fluorescence spectra detection device prototype. In our system, the 263 nm and 355 nm lasers are used to sequentially excite the fluorescence of aerosol stream, which is located spatially and temporally by two crossed infrared lasers; a bifurcated fiber bundle is applied to receive the fluorescence spectra of 274–463 nm and 374–565 nm. Besides, with a 32-channel photomultiplier tube as detector, a self-developed combined spectrometer with Czerny-Turner design is employed to detect the two band spectra in a preset timing sequence. Experiments show that the system can detect the fluorescence spectra, after dual-wavelength-excitation, of three intrinsic fluorophore samples and three bioaerosol samples. [ABSTRACT FROM AUTHOR]