Search

The aim of this study was to determine the acoustic and thermal properties of particleboards made from mulberry wood pruning waste using urea formaldehyde resin (UF) as a binder. The investigation focused on the evaluation of the thermal conductivity and the acoustic absorption of the boards and the assessment of their feasibility for use in the construction sector. The mean thermal conductivity values of the particleboards (0.065–0.068 W/mK) were lower than those obtained in wood and similar to those in cork panels. The samples were tested with frequencies from 50 to 6300 Hz. In all cases, the results allowed us to conclude that they were better sound absorbers than commercial wood and plywood panels of the same average density for low frequencies, and with similar values for medium and high frequencies. The mechanical results reached the minimum requirement to be considered as boards for general use and, specifically with particles from 0.25 to 1.00 mm, for furniture according to European standards. The particle size of the particleboards was the variable that influenced all the acoustic properties, but did not affect the thermal conductivity. The experimental results indicated that the thermal and acoustic properties of these particleboards were promising for their application in commercial uses. [ABSTRACT FROM AUTHOR]

The aim of this study was to determine the acoustic and thermal properties of particleboards made from mulberry wood pruning waste using urea formaldehyde resin (UF) as a binder. The investigation focused on the evaluation of the thermal conductivity and the acoustic absorption of the boards and the assessment of their feasibility for use in the construction sector. The mean thermal conductivity values of the particleboards (0.065–0.068 W/mK) were lower than those obtained in wood and similar to those in cork panels. The samples were tested with frequencies from 50 to 6300 Hz. In all cases, the results allowed us to conclude that they were better sound absorbers than commercial wood and plywood panels of the same average density for low frequencies, and with similar values for medium and high frequencies. The mechanical results reached the minimum requirement to be considered as boards for general use and, specifically with particles from 0.25 to 1.00 mm, for furniture according to European standards. The particle size of the particleboards was the variable that influenced all the acoustic properties, but did not affect the thermal conductivity. The experimental results indicated that the thermal and acoustic properties of these particleboards were promising for their application in commercial uses.

The use of bio-based building materials is a sustainable opportunity to reduce the environmental footprint associated with the construction sector. The achievement of this objective is primely achieved through the valorisation of vegetable waste, resulting in a reduction in the use of primary source material and waste generation. Within the scope of this study, the focus is directed towards research concerning the thermal, acoustic, and fire behaviour properties of bio-based building materials. This study conducts a comprehensive bibliometric analysis encompassing all documents meeting these criteria within the Scopus database, spanning two decades, from 2003 to 2023. The comprehensive analysis covered a total of 1081 documents, which were analysed. This analysis furnishes insight into various facets, including the temporal evolution of publications, journals boasting the highest publication counts and impact, influential research areas, countries with substantial contributions and their collaborative patterns, noteworthy affiliations, prolific authors, and seminal documents, alongside recurrent keywords. The objective of this comprehensive study is to provide a detailed analysis of the documents published up to the present day, in order to identify research gaps and potential opportunities in this field, to assist new researchers interested in the subject. The analysis reveals that bio-based building materials have gained substantial attention over the past decade. With each passing year, the published documents have increased their impact and become more specific, underscoring the growing importance of this subject. This evolution has also fostered a broader network of researchers engaged in this field. However, it is noteworthy that the characterization of these materials focuses predominantly on their thermal properties, while research avenues related to acoustic and fire properties remain less explored and present opportunities for future investigation. • This study contributes to identify research gaps and potential opportunities in the field of bio-based building materials. • Studies in bio-based building materials have shown an annual growth of the 25% since 2014, being a topic on the rise. • France and China are the countries with the highest scientific publication on bio-based building materials. • Keywords play a crucial role in making visible the research within bio-based building materials. • "Thermal Conductivity" and "Thermal insulation" are the most repeated keywords in this field. [ABSTRACT FROM AUTHOR]

Environmentally sustainable cement mortars containing wheat straw (Southern Italy, Apulia region) of different length and dosage and perlite beads as aggregates were prepared and characterised by rheological, thermal, acoustic, mechanical, optical and microstructural tests. A complete replacement of the conventional sand was carried out. Composites with bare straw (S), perlite (P), and with a mixture of inorganic and organic aggregates (P/S), were characterised and compared with the properties of conventional sand mortar. It was observed that the straw fresh composites showed a decrease in workability with fibre length decrease and with increase in straw volume, while the conglomerates with bare perlite, and with the aggregate mixture, showed similar consistency to the control. The thermal insulation of the straw mortars was extremely high compared to the sand reference (85–90%), as was the acoustic absorption, especially in the 500–1000 Hz range. These results were attributed to the high porosity of these composites and showed enhancement of these properties with decrease in straw length and increase in straw volume. The bare perlite sample showed the lowest thermal insulation and acoustic absorption, being less porous than the former composites, while intermediate values were obtained with the P/S samples. The mechanical performance of the straw composites increased with length of the fibres and decreased with fibre dosage. The addition of expanded perlite to the mixture produced mortars with an improvement in mechanical strength and negligible modification of thermal properties. Straw mortars showed discrete cracks after failure, without separation of the two parts of the specimens, due to the aggregate tensile strength which influenced the impact compression tests. Preliminary observations of the stability of the mortars showed that, more than one year from preparation, the conglomerates did not show detectable signs of degradation. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose : The use of green and eco-natural fibers due to availability, biodegradability, reasonable cost, and non-toxic effects are known as potential acoustic materials in research. Nevertheless, in this area, the use of chemical treatment in natural fibers as an effective strategy to improve the overall properties and acoustic performance is faced with limitations. So that the current paper aims to investigate the effect of alkali treatment on the mechanical and acoustical properties of jute fibers and evaluation of its applicability in noise pollution control. Methods: To determine the effect of alkali treatment on the sound absorption behavior of jute fibers, a sufficient amount of both types of fibers (raw and treated) were used to the fabrication of acoustic samples with thicknesses of 30, 40 and 50 mm at a density of 200 kg/m3. The acoustic evaluation was measured by the Impedance tube system according to transfer function method using by the standard ISO 10534–2. The morphological and tensile properties of fibers were evaluated by the Scanning Electron Microscopy (SEM) and tensile test (ASTM C1557-14 standard). Moreover, Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD) were used to study and compare the chemical properties of raw and treated fibers. Results: The result showed that the mean tensile strength and crystallinity index (CI) of treated fibers comparing with raw fibers increased by 61.66% and 3.26% respectively. The use of Alkali treatment helped to improve sound absorption performance of jute fibers with different thicknesses. Furthermore, noise reduction rate (NRC) in treated acoustic samples compared to untreated with a thickness of 50 mm increased from 0.66 to 0.69. Conclusion: Finally, the alkali treatment has enhanced the properties of jute fibers and confirmed the applicability of these fibers in acoustic absorption. [ABSTRACT FROM AUTHOR]

The present research is the first attempt to investigate the opportunity of incorporating Egyptian aluminum slag (aluminum dross [Al-dross]) up to 50% into alkali-activated slag (AAS) lightweight mortars for thermal insulation and acoustic absorption purposes. Because expanded perlite (EP) is a standout among the effective materials in insulating, it was used as a fine aggregate. To increase the efficiency of thermal insulation and acoustic absorption, different foaming/blowing agents (0.5 and 4%) of hydrogen peroxide (H2O2) were incorporated. The results of density, compressive strength, total porosity, water absorption, thermal conductivity, and acoustic absorption of different mixtures were measured and compared with those containing 100% slag prepared with either EP or natural silica sand as a fine aggregate without any foaming/blowing agent. The selected samples were examined by different tools such as X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The results showed that introducing 50% Al-dross, without any foaming agent, could decrease the thermal conductivity and density by 23.12% and 14.83%, respectively. Including a high dosage of foaming agent resulted in low thermal conductivities (0.091 to 0.107 W/mK), low densities (209.3 to 544 kg/m3), high acoustic absorption coefficient, and acceptable compressive strength (0.99 to 1.67 MPa). The new product can not only save energy but also reduce the problem of by-products in landfills. [ABSTRACT FROM AUTHOR]

Environmentally sustainable cement mortars containing wheat straw (Southern Italy, Apulia region) of different length and dosage and perlite beads as aggregates were prepared and characterised by rheological, thermal, acoustic, mechanical, optical and microstructural tests. A complete replacement of the conventional sand was carried out. Composites with bare straw (S), perlite (P), and with a mixture of inorganic and organic aggregates (P/S), were characterised and compared with the properties of conventional sand mortar. It was observed that the straw fresh composites showed a decrease in workability with fibre length decrease and with increase in straw volume, while the conglomerates with bare perlite, and with the aggregate mixture, showed similar consistency to the control. The thermal insulation of the straw mortars was extremely high compared to the sand reference (85–90%), as was the acoustic absorption, especially in the 500–1000 Hz range. These results were attributed to the high porosity of these composites and showed enhancement of these properties with decrease in straw length and increase in straw volume. The bare perlite sample showed the lowest thermal insulation and acoustic absorption, being less porous than the former composites, while intermediate values were obtained with the P/S samples. The mechanical performance of the straw composites increased with length of the fibres and decreased with fibre dosage. The addition of expanded perlite to the mixture produced mortars with an improvement in mechanical strength and negligible modification of thermal properties. Straw mortars showed discrete cracks after failure, without separation of the two parts of the specimens, due to the aggregate tensile strength which influenced the impact compression tests. Preliminary observations of the stability of the mortars showed that, more than one year from preparation, the conglomerates did not show detectable signs of degradation.

Flame-retardant water-blown rigid polyurethane foams (RPUFs) modified by ammonium polyphosphate (APP) and diethyl ethylphosphonate (DEEP) were synthesized by a one-pot free-rising method. We performed scanning electron microscopy (SEM), compression strength tests, acoustic absorption measurements and thermogravimetric analysis, as well as limited oxygen index, vertical burning and cone calorimeter tests to investigate the mechanical properties, acoustic performance and flame retardancy of the foams. SEM confirmed that the open-cell structures of the foams were successfully constructed with the introduction of a cell-opening agent. Upon using 20 php APP, the average acoustic absorption coefficient of the foam reached 0.535 in an acoustic frequency range of 1500–5000 Hz. The results of thermogravimetric analysis demonstrated that the incorporation of APP and DEEP can effectively restrain mass loss of RPUFs during pyrolysis. In particular, the compressive strength of a foam composite containing 5 php APP and 15 php DEEP increased to 188.77 kPa and the LOI value reached 24.9%. In a vertical burning test and a cone calorimeter test, the joint use of APP and DEEP endowed RPUFs with a V-0 rating and they attained a THR value of 23.43 MJ/m2. Moreover, the addition of APP improved the acoustic absorption performance of the foam, verified by acoustic absorption measurements. Considering potential applications, the formulation containing 15 php APP and 5 php DEEP could be used in the preparation of a new flame-retardant acoustic absorption rigid polyurethane foam. [ABSTRACT FROM AUTHOR]