Search

This study aimed to investigate inter- and intra-athlete technique variability in pre-elite and elite Australian fast bowlers delivering new ball conventional swing bowling. Ball grip angle and pelvis, torso, shoulder, elbow, wrist, upper arm, forearm, and hand kinematics were investigated at the point of ball release for inswing and outswing deliveries. Descriptive evaluations of group and individual data and k-means cluster analyses were used to assess inter- and intra-bowler technique variability. Inter-athlete technique and ball grip variability were identified, demonstrating that skilled bowlers use individualised strategies to generate swing. Functional movement variability was demonstrated by intra-athlete variability in successful swing bowling trials. Bowlers demonstrated stable technique parameters in large proximal body segments of the pelvis and torso, providing a level of repeatability to their bowling action. Greater variation was observed in bowling arm kinematics, allowing athletes to manipulate the finger and ball position to achieve the desired seam orientation at the point of ball release. This study demonstrates that skilled bowlers use individualised techniques and grips to generate swing and employ technique variations in successive deliveries. Coaches should employ individualised training strategies and use constraints-led approaches in training environments to encourage bowlers to seek adaptive movement solutions to generate swing. [ABSTRACT FROM AUTHOR]

This study compared the effects of rest redistribution (RR) on kinetic and kinematic variables during the countermovement shrug (CMS). Twenty-one male subjects (age 27.2 ± 3.3. years, height 1.78 ± 0.07 m, body mass 77.2 ± 10.6 kg, relative 1 repetition maximum (1RM) power clean [PC] 1.22 ± 0.16 kg·kg-1) performed the CMS using 140% of 1RM PC with 3 traditional sets of 6 repetitions (TS), 9 sets of 2 repetitions with RR [45 s rest after 2 repetitions] (RR45), and 6 sets of 3 repetitions with RR [72 s rest after 3 repetitions] (RR72). There were no significant or meaningful differences (p > 0.05, g = 0.00-0.15) between set configurations for any variables for the average of the 18 repetitions. There were no significant (p > 0.05) or meaningful (g = 0.00-0.14) differences for configuration and configuration × set for peak (PF) and mean force (MF), peak velocity (PV), impulse, phase duration, peak velocity decline, peak velocity maintenance, and rating of perceived exertion. There was significantly greater (p = 0.034) albeit small (g = 0.15) difference for mean velocity (MV) during TS compared with RR72. There were no significant or meaningful differences (p > 0.05, g = 0.00-0.09) between sets for PF, MF, PV, MV, impulse, and duration across TS, RR45, and RR72. Rest redistribution protocols did not result in greater kinetics or kinematics during the CMS compared with TS, when total rest time was equated. Thus, shorter more frequent rest periods during the CMS may not be required to maintain force-time characteristics. [ABSTRACT FROM AUTHOR]

The effect of complex training (CT) session design on acute postactivation performance enhancement (PAPE) of loaded jump squat(s) (JS) and ballistic bench throw(s) (BBT) was examined. This study further investigated whether relative strength is a moderating factor in PAPE in response to 3 distinct CT protocols. Fourteen Australian Football League (AFL) Academy athletes performed 3 different protocols comprising 85% 1 repetition maximum (1RM) back squats and bench press, and 30% 1RM loaded JS and BBT, differing in the sequencing of exercise order (i.e., complex pairs performed in isolation or with additional exercise interspersed within the intracomplex recovery period) and duration of the intracomplex recovery (2.5, 5, or 15 minutes). Differences in JS and BBT performance between CT protocols were trivial except for JS eccentric depth and eccentric impulse where small to moderate substantial differences were observed between protocols 2 and 3 in various sets; a small difference was observed between protocols 1 and 3 for eccentric depth. Small differences between protocols 1 and 2 were observed in set 1 in BBT peak velocity (ES= -20.26) and peak power (W·kg-1 ) (ES =-0.31). Small magnitudes of PAPE and decrements in performance were observed in some variables within protocols, yet effects across sets were inconsistent. Relative strength was negatively associated with JS performance (i.e., stronger athletes demonstrated a lower magnitude of PAPE) yet positively associated with PAPE of BBT peak force (N·kg-1 ) and peak power (W·kg-1 ). Alternating lower-body and upper-body complex sets and performance of ancillary exercise within the intracomplex recovery does not contribute to cumulative fatigue throughout the session and does not detrimentally affect subsequent JS and BBT performance. The manipulation of complex-set sequences offers practitioners a timeefficient means of providing both lower-body and upper-body heavy-resistance and ballistic training stimuli to achieve chronic training adaptations in maximal strength and power, with targeted improvements in specific kinetic and kinematic variables. [ABSTRACT FROM AUTHOR]

The effect of variable load jump squats (JSs) on acute drop jump (DJ) performance across multiple sets was examined. Seventeen elite rugby sevens athletes performed 3 DJs after 3 repetitions of a JS conditioning activity (CA) performed at 30 or 50% 1RM back squat loads. Acute postactivation performance enhancement (PAPE) in DJ kinetic and kinematic variables was assessed using a commercially available force platform (1,000 Hz). Postactivation performance enhancement was predominant after the 30% 1RM load with the greatest frequency of potentiation exhibited in set 3. The 50% 1RM CA resulted in substantial decrements in DJ performance with the exception of active stiffness, reactive strength index (flight:contact time), and contact time. Moderate differences were observed between the 50 and 30% 1RM loads for peak power (W), impulse (N·s), and force at zero velocity (N); active stiffness was the only variable where PAPE was greater in the 50% 1RM CA (ES: small). Active stiffness was the only variable to display favorable associations with relative strength in both the JS 30% 1RM (ES: 0.38 ± 0.20; moderate) and 50% 1RM (ES: 0.24 ± 0.23; small) CA loads. The JS 30% 1RM CA results in greater magnitude and frequency of PAPE of DJ kinetic and kinematic variables and is recommended if seeking to target PAPE in a range of DJ performance variables. Heavier JS loads may be appropriate if enhancement of muscle stiffness and stretch-shortening cycle efficiency is required. Consideration of targeted kinetic and kinematic variables when selecting CA intensity in complex training design is recommended. [ABSTRACT FROM AUTHOR]

Overarm throwing is an essential fundamental movement skill (FMS). Competency in throwing is critical to encourage physical activity throughout lifespan. However, the segmental sequencing characteristics of skilled throwing to achieve maximum ball release speed are unclear. Further, the standard instructions for segmental sequencing in coaching manuals are anecdotal and not based on scientific evidence. Therefore, the aim of this study was to establish the critical features of upper‐body sequencing in skilled throwing for maximum speed. This would enable revised instructions for coaching throwing based on scientific evidence. The three‐dimensional kinematics of 144 right‐handed unconstrained maximum overarm throws were captured and analyzed. The quartiles of participants with the fastest and lowest ball release speed, normalized by height, were defined as the Skilled Group and Less Skilled Group, respectively. Paired t‐tests were used to determine the differences in times of successive events within groups and independent t‐tests for between‐group differences in temporal space between events for all sequences. A characteristic segmental sequence of each group was defined as a sequence with significant within‐group differences in two successive events (p < 0.001), while a critical segmental sequence was defined as a sequence with significant differences in temporal space both within groups and between groups (p < 0.001). The Skilled Group had six characteristic sequences, while two were found for the Less Skilled Group, summarized in the conceptual model. A single critical sequence of non‐throwing arm elbow extension prior to shoulder extension was found. Five evidence‐based instructions were recommended to add to the Australian FMS instruction manual. [ABSTRACT FROM AUTHOR]

To investigate the sustainability of Robot-assisted upper limb therapy (RT-UL) as part of routine occupational therapy and physiotherapy clinical practice. Two separate audits, 12 months apart, of RT-UL computer data records were undertaken to determine sustainability in a subacute rehabilitation unit. Records of the two audits were compared in terms of the number of early subacute stroke survivors using RT-UL, the number of RT-UL sessions, duration of RT-UL sessions, and disciplines prescribing RT-UL. During Audit 1 58% (n = 18) of stroke survivors received RT-UL compared to 50% (n = 7) in Audit 2. The total number of RT-UL sessions reduced between audits (148 vs. 36 sessions) reflecting the overall reduction in admission rates for stroke survivors. There was no significant difference between audits in the average number of RT-UL sessions per patient (p = 0.203) nor the length of sessions (p = 0.762). Patients engaged in active therapy more than three-quarters of the time when on the robotic device. Physiotherapists were the primary prescribers of RT-UL when compared to occupational therapists. RT-UL was in continued and regular use with stroke survivors 2 years after initial implementation within an inpatient rehabilitation setting. RT-UL practice was intensive and used routinely with patients. RT-UL is a sustainable and intensive intervention for stroke survivors within an inpatient rehabilitative setting. The cost-benefits of RT-UL should be evaluated from the perspective of the whole rehabilitation service not just at an individual patient level. RT-UL may be considered a "bridging" form of UL practice for those with more limited active UL movement until there is sufficient UL movement and power for more complex real-world task-specific practice. [ABSTRACT FROM AUTHOR]

Biomechanically, sea turtles could be perceived as birds of the ocean as they glide and flap their forelimbs to produce the necessary forces required for locomotion, making sea turtles an interesting animal to study. However, being an endangered species makes studying the sea turtle's biomechanics a complex problem to solve, both technically and ethically, without causing disturbance. This work develops a novel, non-invasive procedure to develop full three-dimensional kinematics for wild sea turtles by filming the animals in Australia's Great Barrier Reef using underwater drones without disturbing them. We found that the wild animals had very different swimming patterns than previous studies on juveniles in captivity. Our findings show that the flipper goes through a closed-loop trajectory with extended sweeping of the flipper tip towards the centre of the carapace to create a clapping motion. We have named this the "sweep stroke" and in contrast to previously described four-stage models, it creates a five-stage cycle swimming locomotion model. The model presented here could lead to a better comprehension of the sea turtle propulsion methods and their fluid–structure interaction. [ABSTRACT FROM AUTHOR]

Frontal plane postures during the ultimate step of sidestepping are linked to increased anterior cruciate ligament injury risk. However, there is a lack of research detailing the kinematic strategies present in the penultimate step. This study, therefore, investigated penultimate and ultimate step kinematics of planned sidestepping (pSS) and unplanned sidestepping (upSS) to further understand the effect of planning time on known ultimate step kinematic and kinetic differences. Sixty male amateur Australian Rules football players performed three trials of straight‐line running (RUN), pSS, and upSS in a randomized order. Mediolateral foot placement and three‐dimensional joint kinematics for the knee, pelvis, and trunk were measured at final foot contact of the penultimate step and initial foot contact of the ultimate step. Peak knee moments were measured during the weight acceptance phase of the ultimate step. In pSS, at the penultimate step final foot contact, the support foot was placed across the midline of the center of mass, in the frontal plane, contralateral to the sidestep direction. Greater trunk lateral flexion toward the sidestep direction and greater negative pelvic lateral tilt were observed in pSS compared with upSS and RUN. Differences between pSS and upSS frontal plane kinematics at penultimate step final foot contact suggest preparatory reorientation strategies are likely constrained by the amount of planning time available. As there are clear differences in preparatory kinematics, we recommend that planning time be considered when training and assessing sidestepping maneuvers and planned and unplanned maneuvers not be treated as interchangeable skills. [ABSTRACT FROM AUTHOR]

To determine which potential contributing factors are associated with upper limb associated reaction (AR) expression in individuals with acquired brain injury (ABI). Forty-two participants underwent three-dimensional motion analysis at self-selected walking speed to generate the AR outcome measure, quantifying their upper limb kinematic deviation compared to healthy controls. Clinical assessment included: upper and lower limb hypertonicity, spasticity and strength, balance, dynamic walking stability, arm and leg function, anxiety, arm pain/discomfort, and fear of falling. Significant, moderate-to-strong correlations (r = 0.42–0.74, p < 0.05) existed between upper limb ARs and both hypertonicity and spasticity of the upper limb muscles and the knee extensors. Significant, moderate correlations to ARs (r = 0.42–0.59, p < 0.05) existed for balance, dynamic stability, upper limb strength, and arm function. The severity of AR was significantly different between those with and without hypertonicity of the four tested upper limb muscles, elbow and long finger flexor spasticity, knee extensor spasticity, and reduced dynamic stability (p < 0.05; effect sizes ≥0.80). However, these contributing factors were not present in all participants. Associated reactions are complex and multi-factorial. There were several significant correlations indicating that factors may influence AR severity. While positive upper motor neuron syndrome features should be prioritised for clinical assessment, these factors are not prerequisites for ARs. Upper limb associated reactions are a complex and multi-factorial phenomenon. Upper limb muscle hypertonicity and spasticity should be prioritised for assessment; however, they are not prerequisites for associated reactions. Hypertonicity and spasticity should be differentiated as they may have differing relationships to associated reactions. Knee extensor hypertonicity and spasticity, postural stability, upper limb strength, and arm function may also be contributing factors to consider. [ABSTRACT FROM AUTHOR]

The wide-scale adoption of selective apple harvesting robots is yet to be seen, due to their strict requirement of well-manicured canopies to perform reliably. However, maintaining this standard of canopy is labour and resource-intensive, and an unsustainable practice for farmers in the long term who are already burdened with labour shortages. Without a complete planner and intelligent decision-making, a robotic harvesting platform would struggle to adapt to, and navigate in even typical canopy environments. In this work, we introduce the Monash Apple Retrieving System (MARS), a selective apple harvesting platform that is capable of navigating and harvesting apples in complex canopy environments without the need for canopy simplification. Utilising a four-tier planning process, MARS is able to generate gentle, collision-free harvesting trajectories in complex and unstructured canopies. Extensive trials were conducted over the 2021 and 2022 apple harvesting seasons in Australia, where MARS achieved a harvesting success rate of 62.8% at a cycle time of 9.18 s per apple, with negligible damage to the fruit. Performance increased to 70.8% success rate and 7.91 s of cycle time under ideal visibility conditions. Although performance can be further enhanced with canopy simplification and hardware upgrades, the reported results were achieved under realistic canopy conditions where very limited attempts were made to modify the canopy to create idealistic conditions for robotic harvesting. This baseline performance is promising for farmers who are wanting to utilise robotic harvesting, but do not have the resources to maintain well-manicured canopies. By lowering strict canopy requirements for robotic harvesting, we can improve accessibility of this technology to more farmers who are struggling with labour shortages around the world. • An apple harvesting robot presented can harvest apples in complex canopies. • A comprehensive planner allows the robot to navigate unstructured environments. • A median cycle time of 9.18 s is achieved at a success rate of 62.8%. • The results are a fair representation of harvesting performance in typical canopies. [ABSTRACT FROM AUTHOR]