Search

Significance: High-speed three-dimensional (3D) super-resolution microscopy is a unique tool to investigate various biological phenomena; yet the technology is not broadly adopted due to its high cost and complex system design. Aim: We present a compact, low-cost, and high-speed 3D structured illumination microscopy (SIM) based on a digital micromirror device and binary holography to visualize fast biological events with super-resolution. Approach: The 3D SIM uses a digital micromirror device to generate three laser foci with individually controllable positions, phases, and amplitudes via binary holography at the back aperture of objective lens to form optimal 3D structured patterns. Fifteen raw images are sequentially recorded and processed by the 3D SIM algorithm to reconstruct a super-resolved image. Results: Super-resolution 3D imaging at a speed of 26.7 frames per second is achieved with a lateral and axial resolution of 155 and 487 nm, which corresponds to a 1.65- and 1.63-times resolution enhancement, respectively, comparing with standard deconvolution microscopy. Conclusions: The 3D SIM realizes fast super-resolution imaging with optimal 3D structured illumination, which may find important applications in biophotonics.

This work was supported by the EPSRC (Grant No. EP/K503162/1). Significance : Optical microscopy is characterized by the ability to get high resolution, below 1 μm, high contrast, functional and quantitative images. The use of shaped illumination, such as with lightsheet microscopy, has led to greater three-dimensional isotropic resolution with low phototoxicity. However, in most complex samples and tissues, optical imaging is limited by scattering. Many solutions to this issue have been proposed, from using passive approaches such as Bessel beam illumination to active methods incorporating aberration correction, but making fair comparisons between different approaches has proven to be challenging. Aim : We present a phase-encoded Monte Carlo radiation transfer algorithm (φMC) capable of comparing the merits of different illumination strategies or predicting the performance of an individual approach. Approach : We show that φMC is capable of modeling interference phenomena such as Gaussian or Bessel beams and compare the model with experiment. Results : Using this verified model, we show that, for a sample with homogeneously distributed scatterers, there is no inherent advantage to illuminating a sample with a conical wave (Bessel beam) instead of a spherical wave (Gaussian beam), except for maintaining a greater depth of focus. Conclusion : φMC is adaptable to any illumination geometry, sample property, or beam type (such as fractal or layered scatterer distribution) and as such provides a powerful predictive tool for optical imaging in thick samples. Publisher PDF

Significance: Polyp size is important for selecting the surveillance interval or treatment policy. Nevertheless, it is challenging to accurately estimate the polyp size during endoscopy. An easy and cost-effective function to assist in polyp size estimation is required. Aim: To propose a virtual scale function for endoscopy and evaluate its performance and expected accuracy. Approach: An adaptive virtual scale behavior was demonstrated. The measurement error of the virtual scale along the distance between the tip of the endoscope and the object plane was evaluated using graph paper. The accuracy of polyp size estimation by an expert endoscopist was compared with the accuracy of the biopsy forceps method using phantom images. Results: The measurement errors of the virtual scale were ≤ 0.7 mm when the distance to the graph paper, which faced the tip of the endoscope, varied from 4 to 30 mm. The accuracy with the virtual scale was significantly higher than that obtained with biopsy forceps (5.3 ± 5.5 % versus 11.9 ± 9.4 % , P

Quantifying parenchymal tissue changes in the lungs is imperative in furthering the study of radiation induced lung damage (RILD). Registering lung images from different time-points is a key step of this process. Traditional intensity-based registration approaches fail this task due to the considerable anatomical changes that occur between timepoints. This work proposes a novel method to successfully register longitudinal pre- and post-radiotherapy (RT) lung computed tomography (CT) scans that exhibit large changes due to RILD, by extracting consistent anatomical features from CT (lung boundaries, main airways, vessels) and using these features to optimise the registrations. Pre-RT and 12 month post-RT CT pairs from fifteen lung cancer patients were used for this study, all with varying degrees of RILD, ranging from mild parenchymal change to extensive consolidation and collapse. For each CT, signed distance transforms from segmentations of the lungs and main airways were generated, and the Frangi vesselness map was calculated. These were concatenated into multi-channel images and diffeomorphic multichannel registration was performed for each image pair using NiftyReg. Traditional intensity-based registrations were also performed for comparison purposes. For the evaluation, the pre- and post-registration landmark distance was calculated for all patients, using an average of 44 manually identified landmark pairs per patient. The mean (standard deviation) distance for all datasets decreased from 15.95 (8.09) mm pre-registration to 4.56 (5.70) mm post-registration, compared to 7.90 (8.97) mm for the intensity-based registrations. Qualitative improvements in image alignment were observed for all patient datasets. For four representative subjects, registrations were performed for three additional follow-up timepoints up to 48 months post-RT and similar accuracy was achieved. We have demonstrated that our novel multichannel registration method can successfully align longitudinal scans from RILD patients in the presence of large anatomical changes such as consolidation and atelectasis, outperforming the traditional registration approach both quantitatively and through thorough visual inspection.

Significance: Quantitative stiffness information can be a powerful aid for tumor or fibrosis diagnosis. Currently, very promising elastography approaches developed for non-contact biomedical imaging are based on transient shear-waves imaging. Transient elastography offers quantitative stiffness information by tracking the propagation of a wave front. The most common method used to compute stiffness from the acquired propagation movie is based on shear-wave time-of-flight calculations. Aim: We introduce an approach to transient shear-wave elastography with spatially coherent sources, able to yield full-field quantitative stiffness maps with reduced artifacts compared to typical artifacts observed in time-of-flight. Approach: A noise-correlation algorithm developed for passive elastography is adapted to spatially coherent narrow or any band sources. This noise-correlation-inspired (NCi) method is employed in parallel with a classic time-of-flight approach. Testing is done on simulation images, experimental validation is conducted with a digital holography setup on controlled homogeneous samples, and full-field quantitative stiffness maps are presented for heterogeneous samples and ex-vivo biological tissues. Results: The NCi approach is first validated on simulations images. Stiffness images processed by the NCi approach on simulated inclusions display significantly less artifacts than with a time-of-flight reconstruction. The adaptability of the NCi algorithm to narrow or any band shear-wave sources was tested successfully. Experimental testing on homogeneous samples demonstrates similar values for both the time-of-flight and the NCi approach. Soft inclusions in agarose sample could be resolved using the NCi method and feasibility on ex-vivo biological tissues is presented. Conclusions: The presented NCi approach was successful in computing quantitative full-field stiffness maps with narrow and broadband source signals on simulation and experimental images from a digital holography setup. Results in heterogeneous media show that the NCi approach could provide stiffness maps with less artifacts than with time-of-flight, demonstrating that a NCi algorithm is a promising approach for shear-wave transient elastography with spatially coherent sources.

Significance: Screening and early detection of oral potentially malignant lesions (OPMLs) are of great significance in reducing the mortality rates associated with head and neck malignancies. Intra-oral multispectral optical imaging of tissues in conjunction with cloud-based machine learning (CBML) can be used to detect oral precancers at the point-of-care (POC) and guide the clinician to the most malignant site for biopsy. Aim: Develop a bimodal multispectral imaging system (BMIS) combining tissue autofluorescence and diffuse reflectance (DR) for mapping changes in oxygenated hemoglobin (HbO2) absorption in the oral mucosa, quantifying tissue abnormalities, and guiding biopsies. Approach: The hand-held widefield BMIS consisting of LEDs emitting at 405, 545, 575, and 610 nm, 5MPx monochrome camera, and proprietary Windows-based software was developed for image capture, processing, and analytics. The DR image ratio (R610/R545) was compared with pathologic classification to develop a CBML algorithm for real-time assessment of tissue status at the POC. Results: Sensitivity of 97.5% and specificity of 92.5% were achieved for discrimination of OPML from patient normal in 40 sites, whereas 82% sensitivity and 96.6% specificity were obtained for discrimination of abnormal (OPML + SCC) in 89 sites. Site-specific algorithms derived for buccal mucosa (27 sites) showed improved sensitivity and specificity of 96.3% for discrimination of OPML from normal. Conclusions: Assessment of oral cancer risk is possible by mapping of HbO2 absorption in tissues, and the BMIS system developed appears to be suitable for biopsy guidance and early detection of oral cancers.