Search

The heavy metal copper is a serious hazard to human health and the environment. It is challenging to develop a highly efficient adsorbent that is easy to prepare, low cost, having large adsorption capacity, and non-polluting to the environment. Herein, an aminated electrospun polyacrylonitrile (PAN) staple fiber was prepared by grafting diethylenetriamine (DETA) after a hydrothermal reaction. DETA possessed numerous amino functional groups, thus providing more adsorption sites and higher adsorption capacity for copper ions (Cu2+). The Cu2+ adsorption behavior of the aminated fiber conformed to the pseudo-second-order kinetic model. It not only possessed high adsorption activity in the pH range of 3.0–6.0 and could reach a high saturated adsorption capacity of 349.65 mg g−1 at high Cu2+ concentrations but also had the ability to reduce the concentration below 1 mg L−1 at low Cu2+ concentrations with a small amount of adsorbent (0.5 mg). After 5 adsorption–desorption experiments, the removal efficiency of Cu2+ was maintained at more than 90%. This aminated PAN fiber is expected to become a candidate material for dealing with Cu2+ pollution. [ABSTRACT FROM AUTHOR]

Constructing lightweight and porous adsorbents which can effectively remove dye contaminants is of great significance in the field of the sewage treatment. In this work, anisotropic cellulose nanofibril (CNF) composite sponges assisted by rectorites are fabricated through directional freeze-drying. The resulted composite sponge exhibits the superior saturated adsorption capacity and removal efficiency of 120.0 mg/g and 96.1% for methylene blue (MB), respectively, which is better than the pure CNF sponge and rectorite powders. This is attributed to the strong electrostatic interaction between CNFs and MB, and good cation exchange property of rectorites inside the three-dimensional (3D) highly porous composite sponge. The MB adsorption process of the composite sponge fits to the pseudo-second-order kinetic model and the Langmuir isotherm model well, which is affected by both boundary layer and intraparticle diffusion, resulting in a theoretical maximum adsorption capacity of 214.6 mg/g. Moreover, it also possesses a selective adsorption capacity for anionic and cationic dyes, which is expected to realize the separation treatment of different dyes according to actual application requirements. [Display omitted] • Anisotropic CNF/rectorite composite sponge by directional freeze-drying. • Superior MB adsorption capacity and removal rate of 120.0 mg/g and 96.1%. • Selective adsorption and separation capacity for anionic and cationic dyes. • Detailed evaluation of the adsorption behavior and mechanism. [ABSTRACT FROM AUTHOR]

Herein, we used a one-pot method to fabricate a novel MOF-on-MOF adsorbent, namely MOF(Zr)-on-MOF(Ce). The adsorbent demonstrated a high maximum fluoride-ions capture capacity of 164.47 mg g−1. The morphology, elemental distribution, pore size distribution, and thermal stability were studied using SEM-EDS, XRD, BET, and TGA. The influence of the temperature, solution pH, fluoride concentration, and coexisting ions was explored using intermittent experiments. The results suggested that MOF(Zr)-on-MOF(Ce) had a fast capture rate for fluoride. MOF(Zr)-on-MOF(Ce) maintained an excellent fluoride removal performance over a wide pH range with an initial fluoride concentration of 20 mg L−1. The optimal effect was obtained at a pH of 4, but a high removal efficiency of 94% was maintained even at a pH of 9. Interference experiments showed that only the PO 4 3– had an adverse inhibition influence. The field experiments demonstrated that MOF(Zr)-on-MOF(Ce) can keep the safety threshold levels of fluoride in drinking water. The Langmuir and pseudo-second order kinetic models were well fitted for the defluoridation process, demonstrating that the adsorption of fluoride ions on MOF(Zr)-on-MOF(Ce) was dominated by monolayer chemisorption. With the further characterization and kinetic thermodynamic studies indicates that the removal mechanism involves ion exchange, electrostatic interactions and complexation effect. [Display omitted] • A novel MOF(Zr)-on-MOF(Ce) adsorbent were fabricated via one-pot methods for defluorination. • The maximum adsorption capacity of MOF(Zr)-on-MOF(Ce) was 164.47 mg g–1 for F ions. • The adsorbent had an excellent defluoridation performance with a wide pH range. • The mechanisms are ion-exchange, electrostatic interaction and complexation effect. [ABSTRACT FROM AUTHOR]

A reusable magnetic WC-Co composite (Co/C-1000) filter with efficient water treatment was prepared by in-situ growth of ZIF-67 on the inside and outside surface of wood following by carbonization. [Display omitted] • Magnetic WC-Co composite is designed for wastewater treatment. • WC-Co composite has ultra-high dyes adsorption capacity. • The Co/C-1000 filter has good removal efficiency for high dye concentration solution at a higher flux. • The Co/C-1000 filter with excellent thermal stability can be recycled by simple burning method. Organic dye in water is a crucial global environmental problem. Notably, dyes, especially anionic dye Congo red (CR) and cationic dye Methylene blue (MB), have carcinogenic and mutagenic effects on human health. However, the commercial activated carbon with bad reusability is difficult to collect, which results in poor actual adsorption. In this paper, ZIF-67@wood obtained by in situ growth of ZIF-67 on wood is carbonized to prepare magnetic WC-Co composites. The hierarchical porous structure of wood can facilitate the rapid passage of dye solution, and promote full contact between magnetic core–shell Co/C nanoparticles and dyes. The adsorption capacities of CR and MB by Co/C-1000 are 1117.03 and 805.08 mg g−1, respectively. The pH pzc (7.9) of Co/C-1000 is then determined. When the dye concentration reaches 1200 mg L−1, the removal efficiency of Co/C-1000 reaches 99.98% under gravity. With the flux of 1.0 × 104 L m−2h−1 for CR solution (100 mg L−1), the removal efficiency of Co/C-1000 filter connected with peristaltic pump is almost 99.28%. In addition, the Co/C-1000 filter with high reusability and the adsorbed dyes can be removed by simple burning. This economical, recyclable and self-supporting filter with ultra-high adsorption capacity feature has the potential to replace commercial activated carbon and it will be widely used in practical wastewater treatment. [ABSTRACT FROM AUTHOR]