Search

Reducing greenhouse gas emissions is a crucial challenge in urban areas characterized by high energy consumption and reduced exposure to nature. In this context, the urban green system could play a pivotal role. In the literature, scholars have analyzed both the ability of species-specific and layout-specific green infrastructure to increase carbon sequestration and the best location sites for new green infrastructure to increase the provision of overall ecosystem services. There is a lack of studies helping green urban planners and designers choose where and which green infrastructure to implement based on vegetation species-specific performance and the local carbon emissions of city components. This paper uses tree inventory data from a medium-sized city in central Italy (Perugia) to develop a spatial analysis of urban park performance in carbon sequestration. Then, the method evaluates the carbon emission of a public city building to generate a spatialized balance between building demand and tree supply to support local decisions about the best locations for new green infrastructure and the choice between species. The paper contributes to GIS-based tools that vary the recommended location sites and species for new green infrastructure based on the demanded ecosystem service. [ABSTRACT FROM AUTHOR]

The paper discusses the energy efficiency of smart working (SW) as a solution to traditional work-approach issues, with a focus on evaluating benefits for both employers and employees. Remote working, while offering environmental advantages such as reduced commuting and office space use, poses challenges in assessing its true impact. The study presents results from a dynamic analysis on a real residential building, typical of an architectural style diffused in northern Italy, revealing a 15% average increase in energy consumption when all work tasks are performed from home. To address concerns about the environmental impact of SW, the research proposes a method and metrics for evaluation. Four novel indices (SWEET, SEE, SSEE, and 4E) are introduced, providing a structured approach to assess the energy efficiency of SW initiatives. The paper outlines a methodology for data gathering and metric application, aiming to acquire quantitative insights and mitigate disparities arising from a transfer of burdens to employees. This contribution not only signifies a ground-breaking methodology but also addresses an unresolved research question concerning the evaluation of the actual energy efficiency of smart working implementations for both employers and employees. The results underscore the importance of understanding the nuances of SW's impact on household energy usage and its broader implications for sustainability goals. [ABSTRACT FROM AUTHOR]

Before the COVID-19 pandemic, ventilation in buildings was not always given its due importance. The World Health Organization has highlighted the important role of air exchange with the outdoors in improving the air quality in buildings; buildings should, therefore, be equipped with mechanical ventilation or adequate air conditioning systems. This paper aims to investigate different retrofit solutions for air conditioning, evaluating them in terms of energy consumption and cost and the impact of increased outdoor air exchange rates on countering the propagation of COVID-19; the latter is the main novelty of the paper. As a case study, we take an existing office building located in Central Italy that was previously not equipped with a mechanical ventilation system (a system with primary air was introduced during the study). The energy analysis was conducted using dynamic simulation software after validation through energy bills; energy and economic analyses were conducted considering different external-air exchange rates. An optimal number of outdoor air changes was found to mitigate the risk of COVID-19 infection, a finding in line with the international literature. The increase in air changes with outdoor air leads to a rise in energy consumption and costs. These values were evaluated for different air conditioning systems and operational schedules. These drawbacks can be made less significant by combining interventions in the system with energy-efficiency measures applied to the building envelope. [ABSTRACT FROM AUTHOR]

The integration of renewable energy systems in buildings leads to a reduction in energy bills for end users and a reduction in the carbon footprint of such buildings, usually referred to as prosumers. In addition, the installation of charging points for the electric vehicles of people working or living in these buildings can further improve the energy efficiency of the whole system if innovative technologies, such as vehicle-to-building (V2B) technologies, are implemented. The aim of this paper is to present an Energy Management System (EMS) based on mathematical programming that has been developed to optimally manage a prosumer building equipped with photovoltaics, a micro wind turbine and several charging points for electric vehicles. Capabilities curves of renewable power plant inverters are modelled within the EMS, as well as the possibility to apply power curtailment and V2B. The use of V2B technology reduces the amount of electricity purchased from the public grid, while the use of smart inverters for the power plants allows zero reactive power to be drawn from the grid. Levelized cost of electricity (LCOE) is used to quantify curtailment costs, while penalties on reactive power absorption from the distribution network are evaluated in accordance with the current regulatory framework. Specifically, the model is applied to a prosumer building owned by the postal service in a large city in Italy. The paper reports the main results of the study and proposes a sensitivity analysis on the number of charging stations and vehicles, as well as on the consideration of different typical days characterized by different load and generation profiles. This paper also investigates how errors in forecasting energy production from renewable sources impact the optimal operation of the whole system. [ABSTRACT FROM AUTHOR]

In the frame of developing sustainable, reliable, and regenerative interventions on existing buildings, namely on large-scale public housing, the implementation of functional, technological, and effective strategies is devoted to thoroughly assessing the transformability of buildings using trustworthy performance indicators. With this aim, in the present paper, an assessment framework tool is presented and tested to evaluate the potential of buildings for transformation through the detection of regeneration strategies for the reduction of energy consumption, a definition of the new apartments' internal layout, and the implementation of sustainable systems to foster rainwater harvesting. The procedure is tested on a case study in Latina (Italy), showing its suitability to quantitatively assess the regenerative potentiality of public housing, thus resulting in an effective supporting tool for designers and policy makers. [ABSTRACT FROM AUTHOR]

The glass industry is highly energy-intensive, consuming approximately 500–700 million GJ each year. Replacing inefficient equipment with better-performing equipment is a good strategy to reduce the energy consumption of a glass plant. Since there are many alternative solutions, the choice of which technological improvement to implement is usually difficult. Therefore, a review of solutions to reduce energy consumption in a glass plant is pivotal. The literature offers similar studies, but they are not sufficiently up-to-date and do not represent the actual state of the art, which should be updated. Thus, this paper aims to provide an updated list of alternative solutions, clustering them into different categories (e.g., the process stage). Moreover, this paper investigates the current applicability of energy-saving solutions in Italy. Specifically, a sample of 103 Italian companies is considered and the type of interventions that the companies recently implemented or that they intend to adopt is analyzed. Quantitative statistical and economic analyses were conducted to highlight the most popular solutions and determine their cost-effectiveness. The results show that most interventions consist of replacing machinery with more efficient ones, mainly in auxiliary systems (132 out of 426). The outcome of this paper could represent a guide to select energy-saving solutions. [ABSTRACT FROM AUTHOR]

The use of biomass can be a strategic way to realize a carbon-neutral energy plan, ensuring a fuel feedstock. Residual biomass arising from pruning is demonstrated to be an important energy resource in terms of quantity and quality. In the Salento peninsula, Apulia Region, in the south of Italy, a dramatic outbreak of Xylella fastidiosa has decimated olive trees since 2013, gaining a considerable amount of wood biomass. This paper, starting from the need to find a way to optimize the use of this available stock, reviews the main technologies on the utilization of olive wood for energy purposes. In particular, processes and products are here described, and an energy analysis compares lower heating value (LHV), higher heating value (HHV), mass yield, process operating conditions, and energy generated and spent by the process in order to find the most effective technology in order to optimize the energy use of olive biomass. The conclusions show the advantages and disadvantages of each technology. Pyrolysis performs well, showing the best results for both char HHV and syngas yield under different operating conditions. Gasification seems to be the most appropriate among conversion technologies to optimize olive tree pruning for energy purposes, as it can be used to produce both electrical and thermal energy. In terms of economic valorization, char is the most promising material representing a value-added product, the quality and versatility of which ranges from fuel to soil improvers and additives for the construction of supercapacitors. Conversely, its disadvantages are mainly represented by high ash content, which can slightly decrease the boiler efficiency. Finally, the amount of alkali metals can produce several problems, such as fouling, slagging, corrosion, etc., posing a challenge for combustion control and pollutant minimization. [ABSTRACT FROM AUTHOR]

The building and construction sector has a significant impact on the CO2 emissions and pollutants released into the atmosphere, which contribute to climate change. The EPDB Directive mandates the achievement of minimum energy class E for all residential buildings by 2030 and energy class D by 2033. Particularly, in Italy, about 86% of the existing building stock predates the enactment of any energy laws or regulations, making it imperative to apply the energy efficiency interventions. This paper provides a support decision tool for the identification of the standardized interventions in the building envelope, the air conditioning system, and domestic hot water production. This study is focused on a specific construction period class (1976–1990) in six different climatic zones. The methodological approach is based on a cataloguing phase and the definition of ante operam energy classes as well as on case study identification, energy requalification intervention identification, solution simulations, and cost estimation. By simulating the standardized interventions for each climatic zone, a range of possible combinations is identified. The most advantageous ones are determined based on a cost–benefit analysis considering the potential class jump achieved. The research result is a matrix of energy efficiency interventions that is applicable to each climatic zone and can be extended to the existing housing stock. [ABSTRACT FROM AUTHOR]

Starting from the relationship between urban planning and mobility management, TeMA has gradually expanded the view of the covered topics, always remaining in the groove of rigorous scientific in-depth analysis. This section of the Journal, Review Notes, is the expression of continuously updating emerging topics concerning relationships between urban planning, mobility and environment, through a collection of short scientific papers written by young researchers. The Review Notes are made of four parts. Each section examines a specific aspect of the broader information storage within the main interests of TeMA Journal. In particular, the Urban Practices section aims at producing, analyzing and reporting data on recent and relevant policies in the urban domain. This contribution aims at delving into the Energy Community paradigm and its application into the Italian context. The concept of energy communities has gained significant attention and recognition in both the European and Italian contexts. These communities are based on the idea of decentralizing energy production and fostering local participation in the transition to renewable energy sources. Since only recently the legislative panorama provided a set of limits and opportunities to the implementation of energy communities, this note is dedicated to some of the most interesting spontaneous experiences recently born in Italy, to highlight their strengths and weaknesses. [ABSTRACT FROM AUTHOR]

In temperate climates, such as in most parts of Italy, it is necessary to limit both winter heat losses of buildings and their overheating in other periods. Moreover, in warmer Mediterranean climates the convenience of insulation against the building's thermal inertia must also be evaluated. Therefore, when the energy renovation of an old building with heavy masonry is performed the problem is to optimize the position and the thickness of the additional insulation. In presence of extended glazed surfaces, the most appropriate solar control strategy should be defined too. Both issues are present in many old Italian public buildings. This paper deals with a computerized methodology for optimizing these choices by taking into account the interactions between thermal mass, additional insulation as well as internal and solar gains. The case study consists in a typical school building from the early 1900s. Building's thermal behavior was simulated in different Italian climates: Bologna, Roma and Palermo. The effects of various solutions on energy demand and comfort were compared. The possible effects of different types of masonry, different building's orientations and various intended uses were also explored. Simulation results show that the optimal intervention strategy, for the considered type of building, depends not only on the climate but also on the building's intended use, which determines the internal gains and the time profile of use. [ABSTRACT FROM AUTHOR]

In the current context of joint efforts towards the decarbonisation of buildings, integrating occupants' comfort and health with latest technological advancements for energy efficiency is at the center of the latest development of research, policies and professional practice. Radiant systems are encountering great success since the low-thickness systems can also be used in renovation projects for both heating and cooling, while guaranteeing optimal comfort. However, dehumidification is often required for optimal radiant cooling operation with no condensation risks, and the great potential of mechanical ventilation systems to optimally address the needs for dehumidification, air renewal, health and energy efficiency appears to be far from its full exploitation in the post-COVID-19 era. The present paper aims at providing a quantification of the energy and financial impacts of the implementation of a controlled mechanical ventilation system (CMV) coupled to a radiant system in a typical residential case study building in Italy. The results show that the sole CMV may decrease primary energy demand and energy costs by more than 30% and contribute to an increase in the smart readiness of the building by 8%, but further incentive policies must be developed to cover the still high investment and maintenance cost. [ABSTRACT FROM AUTHOR]

As the urgency to mitigate climate change intensifies, the achievement of zero carbon targets in the built environment has become a critical objective. Building retrofitting plays a vital role in reducing energy consumption and carbon emissions in existing buildings. This paper presents an approach that combines Building Information Modeling (BIM) with multiple domains to strive for zero carbon targets in building retrofit projects. The proposed approach is based on a dynamic multi-parameter analysis that integrates indoor comfort, energy savings, CO2eq reduction, and the social cost of carbon while considering investment costs. Renewable energy technologies, such as photovoltaic panels and solar thermal systems, are emphasized to achieve the desired zero-carbon outcomes. Real-time monitoring mechanisms enable continuous performance evaluation and adaptive retrofit strategies for further energy savings. This approach is validated through a case study of an existing thermal bath building, known as "Terme Lucane", located in southern Italy. The results of the study demonstrate significant reductions in energy consumption and carbon emissions, highlighting the potential of the proposed approach to achieve zero carbon targets through the integration of multi-data BIM implementation. These findings offer a promising pathway for building retrofit projects aiming for zero carbon targets through multi-data BIM modeling. [ABSTRACT FROM AUTHOR]

The Renovation Wave for Europe highlighted the role of the public building stock for which Directive 2012/27/EU has set an annual renewal rate of 3%, which should rise to reach the goal of decarbonization by 2050. In this paper, the energy retrofit of an educational building—at the academic level—in Southern Italy was investigated. The aim was to evaluate the incentive share, which could accelerate the energy efficiency process, to achieve a cost-effective nZEB. The results show that the highest incentive rate is required for interventions on the opaque building envelope, which are also those that allow the least energy savings. An incentive rate of about 45% for the energy efficiency of the transparent envelope is necessary to reduce the payback time by about 7 years. The efficiency of the plants and the installation of a PV system are energetically and economically convenient even without forms of economic incentive. Finally, if the building is brought to high energy standards—a primary energy saving of 46% and energy class A3—an incentive rate of 40% is required to repay the intervention in about 10 years. [ABSTRACT FROM AUTHOR]

This paper regards the design and dynamic modelling of a greenhouse coupled with renewable energy technologies to obtain a hybrid renewable energy plant as an optimal solution in the green farm framework. The considered technologies are PV panels, solar thermal collectors, and a biomass auxiliary heater. The system is also coupled with a pyrogasifier, supplied by wood and agricultural waste in the framework of a biocircular economic approach. To supply the investigated user, with a "green farm" located in Castelvolturno (Naples, South of Italy) reducing the energy consumption and operating costs, all of the main components of the plant were suitably designed. The operation of the designed components was simulated by a dynamic simulation model developed by TRNSYS software and validated by means of the literature results. A comprehensive energy, economic, and environmental analysis of the greenhouse is presented. The main results suggest that the investigated renewable plant reduces the total equivalent CO2 emissions by 148.66 t/y. Considering the current high increases in energy prices as a result of the energy crisis due to the war, the system shows very significant profitability with a simple payback of only 1.7 years. [ABSTRACT FROM AUTHOR]

Increasing interest in natural gas-fired gensets is motivated by District Heating (DH) network applications, especially in urban areas. Even if they represent customary solutions, when used in DH, duty regimes are driven by network thermal energy demands resulting in discontinuous operation, which affects their remaining useful life. As such, the attention on effective condition-based maintenance has gained momentum. In this paper, a novel unsupervised anomaly detection framework is proposed for gensets in DH networks based on Supervisory Control And Data Acquisition (SCADA) data. The framework relies on multivariate Machine-Learning (ML) regression models trained with a Leave-One-Out Cross-Validation method. Model residuals generated during the testing phase are then post-processed with a sliding threshold approach based on a rolling average. This methodology is tested against nine major failures that occurred on the gas genset installed in the Aosta DH plant in Italy. The results show that the proposed framework successfully detects anomalies and anticipates SCADA alarms related to unscheduled downtime. [ABSTRACT FROM AUTHOR]

The Water–Energy–Food (WEF) nexus describes natural resource use in the context of social needs and economic development, addressing food, water, and energy security. Population growth and rising economic prosperity will increase the demand for energy, food, and water in the Mediterranean region, compromising the sustainable use of resources. As governments are required to make decisions in order to cope with increasing demands for resources, this paper performs a review of the legislation and WEF policies, identifying the main political and institutional actors involved and the possible policy (in)coherence in four MED countries located on two continents: Egypt, Italy, Spain, and Tunisia. This choice will allow the identification of the barriers and catalysts influencing the implementation of WEF policies and will improve our understanding of the WEF trade-offs and synergies by exploring them on national, regional, and local scales. [ABSTRACT FROM AUTHOR]

This paper proposes an energy management system based on an Artificial Neural Network (ANN) to be integrated with the standard ISO 50001 and aims to describe the definition and the enhancement of the energy baselines by means of artificial intelligence techniques applied and tested on the real electrical absorption data of the auxiliary units of different thermal power plants in Italy. Power plant optimized operations are important both for cost and energy performance reasons with related effects on the environment in the next future energy transition scenario. The improvement of the energy baselines consists in determining more accurate consumption monitoring models that are able to track inefficiencies and absorption drifts through data analytics and Artificial Intelligence. Starting from the analysis of the energy vectors at the production site level, we performed a multi-scale analysis to define the consumption at macro areas level and finally find the most relevant consumption units within the plants. A comparison of different ANNs applied to several real power plant data was performed to model complex plant architecture and optimize energy savings with respect to pre-set thresholds according to the ISO 50001 standard procedure. The energy baselines are determined through the analysis of the data available in the power plants' Distributed Control System (DCS), and we can identify the consumption derived from the unit's proper operation. Based on the reported numerical simulations, improved baselines have been reached up to a 5% threshold for different plant sub-units, thus representing a relevant overall saving in terms of alert threshold definition and related control efficiency: a potential saving of about 140 MWh throughout the considered three-year dataset was obtained taking into account a cooling tower sub-unit, representing a considerable economic benefit. The results obtained highlight the neural technique efficiency in defining more accurate energy baselines and represents a valuable tool for large energy plant asset management to face relevant energy drifts observed in the last years of plant operation. [ABSTRACT FROM AUTHOR]

Green hydrogen exploitation plays a crucial role in achieving carbon neutrality by 2050. Hydrogen, in fact, provides a number of key benefits for the energy system, due to its integrability with other clean technologies for energy production and consumption. This paper is aimed at presenting the project of recovery of an abandoned industrial area located in central Italy by developing a site for the production of green hydrogen. To this aim, the analysis of the territorial and industrial context of the area allowed us to design the project phases and to define the sizing criteria of the hydrogen production plant. The results of a preliminary cost–benefit analysis show that a huge initial investment is required and that, in the short term, the project is sustainable only with a very large public grant. On the other hand, in the long term, the project is sustainable, and the benefits significantly overcome the costs. [ABSTRACT FROM AUTHOR]

Market-based instruments such as white certificates offer the potential to increase efficiency gains, reduce primary energy consumption and make energy systems more resilient. The purpose of this paper is to provide insights into the white certificate scheme through a case study analysis. In light of increasing decarbonization and energy efficiency targets, it is important to rethink the role that policy instruments play in the energy transition, including the energy efficiency obligation schemes within which white certificate schemes fall. We focus on Italy's white certificate scheme because it is among the longest-lived and has achieved notable results. The scheme is characterized by annually increasing energy savings targets, flexibility, the opportunity to include many interventions, and the role of energy services companies. We provide evidence based on an empirical survey and fill the research gap left by the latest updates to the scheme along with an appraisal of those updates, which covers prominent scheme innovations such as its stability mechanism. Our research can serve as a baseline for policymakers in designing white certificate schemes in countries with little related previous experience and provide useful information from countries where similar schemes have been implemented to fine-tune similar market-based mechanisms to improve energy efficiency. [ABSTRACT FROM AUTHOR]

Mediterranean rural settlements suffer from numerous environmental challenges, specifically the annual decrease of the farmlands, climate change threats, and growing resource consumption and demand, such as energy, the core of development. Rural areas play a significant role in achieving food security and sustainable development. Therefore, this paper promotes the energy community and agrivoltaic key concepts as pillars to show how buildings and farms' land uses positively impact the ecosystem. The study focused on Egypt and Italy as representatives of the entire region. Two rural settlements with the same characteristics representing typical agriculture-based patterns have been selected: Lasaifar Albalad, representing 339 villages in the Delta Region, northern Egypt, and Pontinia, representing rural typologies of the 1930s in the Lazio Region, central Italy. Then, two focus groups with versatile stakeholders were conducted. The results showed the juxtaposition of the key concepts and national rural and agricultural policies and fostered a novel approach between Egypt and Italy. The study presented the first analysis of both contexts. The focus groups promoted the ideas, led to a better understanding of the implementation possibilities, raised awareness, improved social acceptance, and highlighted the significant barriers. It paved the way for a further study (micro-scale on-ground practices) to be planned and implemented soon. [ABSTRACT FROM AUTHOR]

Precision agriculture is increasingly relying on tractor auto-steer systems to boost productivity and optimize crop inputs. Identifying field variations and performance, on the other hand, is necessary for giving site-specific recommendations. This study reports the field operating performance indicators of manual (MG), semi-automatic (SG), and automatic (AG) tractor guidance for weed control in wheat production in Southern Italy. Performance indicators include effective worked area, overall working time, effective field capacity, field efficiency, fuel consumption, and product usage. The SG tractor guidance working times were similar to the MG, but with significant savings in the herbicide spray solution and work quality. In terms of all parameters examined, the AG outperformed the SG and MG. The AG was 54% faster than the MG, resulting in an increased area worked and effective field capacity of 5 and 46%, respectively. The total time (effective time plus non-productive time) was reduced by 28%, while overlapped areas by 88.9%. Herbicide and fuel input was reduced by 30 and 11.5%, respectively. A streamlined environmental analysis indicated that AG could reduce the energy and carbon intensity of the one-time weed control process by 25 and 27% for each hectare. Our results confirm that auto guidance provides numerous benefits (e.g., machining uniformity, increased work quality, reduced resource use, and reduced environmental burdens), supporting the larger goal of agricultural production sustainability. [ABSTRACT FROM AUTHOR]

Hydraulic complexity metrics referred to as M1 and M2 play an important role when it comes to the analysis of habitat metrics. In the present paper, the significance of these parameters is analysed by using laboratory data as well as field observations along the Tiber River in Italy. Based on the laboratory data, the estimated parameters allow us to characterise the high/low-velocity areas. Based on field observations, larger magnitudes of M1 are linked to the zones with large changes in cross-sectional flow velocity. Larger magnitudes of M2 are observed at the left bank of the channel for all flow conditions, suggesting locations with larger kinetic energy consumption for aquatic organisms. Overall, the findings of the present research would be of particular interest in quantifying biologically important flow patterns occurring at different spatial scales within different streams and flow conditions. [ABSTRACT FROM AUTHOR]

The current paper contributes to the literature on community renewable energy by considering two projects developed in the north-west of Italy, in the Piedmont region. Community renewable energy is increasingly regarded by academic literature and policy discourse as crucial to ensure a socially and environmentally just energy transition. In spite of the growing diffusion of community renewable energy projects, there is still a lack of theoretically informed analyses. Our article tries to address this gap by combining two theoretical perspectives: the multilevel perspective and the socio-technical imaginaries approach. Applying the first perspective helps reconstruct the context and circumstances that have permitted the Piedmont's energy community projects to emerge. Particular attention is given to the windows of opportunity created by the Regional Law 12/2018, which acknowledged the establishment of energy communities for the first time in Italy. The socio-technical imaginaries perspective allows the identification of collective ideas and meanings that emerge when individuals or groups promote a socio-technical innovation. Based on this analysis, three main future changes are associated with community renewable energy: an integral ecology approach, a stronger sense of community, and a local development opportunity for rural areas characterised by depopulation, a low employment rate, and high energy demand. [ABSTRACT FROM AUTHOR]

The transition towards energy efficiency measures and green energy sources is strongly fostered by the European Union. Italy is among the EU countries that have heavily invested in renewable energy sources, more than doubling their share in gross final energy consumption. In particular, biogas has a pivotal role in the generation of electricity and can also be upgraded into biomethane, with a higher and more stable energy content. In this study, the sustainability of the supply chain of electricity from biogas in Italy has been thoroughly analyzed in the broader framework of the ARCADIA (Life Cycle Approach in Public Procurement and Italian LCA Database for Resource Efficiency) project. The environmental assessment, carried out by means of Life Cycle Assessment (LCA), provides a two-fold perspective. Firstly, it allows us to identify the main hotspots of the investigated system, such as the cultivation of dedicated crops, and to provide useful insights for improving environmental performance. Furthermore, a focus on the modeling of the dataset related to the production of electricity from biogas within the Italian electricity mix represents a step ahead in the LCA research, filling the lack of site-specific databases for reliable LCA results. [ABSTRACT FROM AUTHOR]

This study considers an application of the first-order Grey Markov Model to foresee the values of Italian power generation in relation to the available energy sources. The model is used to fit data from the Italian energy system from 2000 to 2022. The integration of Markovian error introduces a random element to the model, which is able now to capture inherent uncertainties and misalignments between the Grey Model predictions and the real data. This application provides valuable insights for strategic planning in the energy sector and future developments. The results show good accuracy of the predictions, which could provide powerful information for the effective implementation of energy policies concerning the evolution of energy demand in the country. Results show an improvement in the performance of more than 50% in terms of Root Mean Squared Error (RMSE) when the Markov chain is integrated in the analysis. Despite advancements, Italy's 2032 energy mix will still significantly rely on fossil fuels, emphasizing the need for sustained efforts beyond 2032 to enhance sustainability. [ABSTRACT FROM AUTHOR]

Neutral-temperature district heating and cooling (NT-DHC) is a recent concept in the district heating sector. The current literature does not directly address the ability to create comprehensive master plans for NT-DHC systems and reliably model their performance. This research presents a new approach for the evaluation and planning of NT-DHC systems. The methodology involves the use of a knapsack optimization algorithm to perform a comprehensive analysis of the conditions that make the NT-DHC solution competitive against individual heating and cooling technologies. The algorithm determines the optimal combination of potential extensions that maximizes overall economic value. The results of a case study, which was conducted in Italy, show that NT-DHC is more suitable in dense urban areas, while air-to-water heat pumps are better suited for low heat density zones. This methodology aims to reduce the risks associated with energy demand and provide more certainty about which areas a network can expand into to be competitive. It is targeted at energy planners, utilities experts, energy engineers, and district heating experts who require assistance and guidance in the planning and early stages of designing a NT-DHC system. This method might enable pre-feasibility studies and preliminary design to determine the opportunities and limitations of a system of this kind from an economic and technological perspective. [ABSTRACT FROM AUTHOR]

This paper contributes to the climate policy discussion by focusing on the challenges and opportunities of reaching net zero emissions by 2050 in Italy. To support Italian energy planning, we developed energy roadmaps towards national climate neutrality, consistent with the Paris Agreement objectives and the IPCC goal of limiting the increase in global surface temperature to 1.5 °C. Starting from the Italian framework, these scenarios identify the correlations among the main pillars for the change of the energy paradigm towards net emissions by 2050. The energy scenarios were developed using TIMES-RSE, a partial equilibrium and technology-rich optimization model of the entire Italian energy system. Subsequently, an in-depth analysis was developed with the sMTISIM, a long-term simulator of power system and electricity markets. The results show that, to achieve climate neutrality by 2050, the Italian energy system will have to experience profound transformations on multiple and strongly related dimensions. A predominantly renewable-based energy mix (at least 80–90% by 2050) is essential to decarbonize most of the final energy consumption. However, the strong increase of non-programmable renewable sources requires particular attention to new flexibility resources needed for the power system, such as Power-to-X. The green fuels produced from renewables via Power-to-X will be a vital energy source for those sectors where electrification faces technical and economic barriers. The paper's findings also confirm that the European "energy efficiency first" principle represents the very first step on the road to climate neutrality. [ABSTRACT FROM AUTHOR]

The last ten years have witnessed an increase in publications focusing on bioeconomy as a proposal to confront the global challenges of climate change, depletion of non-renewable resources and ecosystem degradation. This paper investigates the scientific literature on issues related agricultural bioeconomy by applying a bibliometric network analysis. Bibliometric analysis is applied to the publications of the Scopus database during the period 2010–2020 in order to provide an overview of the main aspects that characterize agricultural bioeconomy. The results showed that out of a total of 1100 scientific papers, only 2.45% were published in 2010, while the corresponding share in 2020 was 20.81%. In the five years of 2016–2020, cumulatively, 70.63% of the publications were made, showing the dynamic evolution of bioeconomy. In addition, out of 85 countries in total, Germany and Italy are the two countries with most publications, while the fragmentation of research is evident with the creation of two main nodes, the European and the American. Moreover, keyword analysis showed that biomass and sustainability are two main recurring concepts, confirming that, currently, bioeconomy operates at three different levels: energy demand, land demand, and governance. It is apparent that to boost the development of agricultural bioeconomy, the following aspects should be assessed: the effective use of resources, an understanding of the key drivers of agricultural bioeconomy, and a clear perception of their associations. There is still no consensus as to which are the key factors that will accelerate its sustainable development. Our pursuit is to use the tools of bibliometric analysis to reach more critical conclusions regarding the agricultural bioeconomy, rather than approach it in a static way. [ABSTRACT FROM AUTHOR]

The paper deals with the energy transition, focusing on the decisions to be taken about the change in the energy conversion capacity of specified portion of the universe, such as industrial or domestic districts, regions, countries, etc. Conversion capacity is intended here as the set of all energy conversion and storage units characterized by type, size and number, and interacting with the natural gas and electricity grids. The goal is to find guidelines for new installations, obtained by simulations of a model able to describe properly the behavior of each energy conversion technology and the interaction with grids. The model is based on a traditional MILNP approach, but contains unique features in the literature, which allow to obtain results of general validity for applications to very different geographical areas, or to countries including very different regions that transmit energy with each other or export/import it from abroad. The main novelty of this work is to identify the best planning for the decarbonisation of energy demand sectors, according to the criterion of minimum cost, both at global and at regional level. The results applied to the case of Italy allow identifying clearly the energy demand sectors to which new installations should be applied first to minimize the cost for the total energy system, and the units that must be foreseen to satisfy these energy demands, i.e. a precise strategy for the energy transition towards a 100% renewable system. • A multi-regional model is built to find the most convenient energy transition path. • General guidelines for Western countries are derived from the Italian case study. • Replacement of boilers with heat pumps allows increasing RES share from 20 to 30%. • For RES share >60%, PtG is the low-carbon strategy for high temperature heat demand. • Transportation is the last energy sector that should be decarbonized. [ABSTRACT FROM AUTHOR]

This paper studies the influence of temperature and of rainfall intensity and the effect of such variations on the treatment efficiencies and on the electrical consumptions in seven medium-large size Wastewater Treatment Plants (WWTPs) in Apulia in South Italy (Bari, Barletta, Brindisi, Lecce, Foggia, Andria and Taranto). It has been observed, in the considered WWTPs, a slight but clear increase of the incoming flow due to the increase in rainfall intensity, which results to an increase of the energy consumption per incoming volume. The impact of the climate change to the incoming flow, during the last five years (2016–2020), has been assessed indicating that an increase in rainfall intensity results to an increase of the WWTPs energy consumptions per wastewater treated volume. More specifically, for a specific WWTP (Lecce) it was found that the electrical consumption increases from 0.36 kw/m3 to 0.51 kw/m3 when the rainfall intensity was increased from 0.8 mm/min to 2.9 mm/min. Some adaption measures have been considered to upgrade the existing WWTP so to mitigate the energy increase and to limit the global effects of climate change. [Display omitted] • As Rain intensity rises, wastewater influx into WWTPs increases. • Rainfall intensity influences negatively electrical consumptions. • BOD removal is lower with increasing annual precipitations. • Temperature influences BOD, COD and SST removal efficiency. [ABSTRACT FROM AUTHOR]

Wastewater treatment plants are highly energy-intensive systems. This research uses Life Cycle Assessment (LCA) to determine the impacts generated during the operation of a wastewater treatment plant. Three different scenarios are analyzed: a baseline scenario that considers a conventional activated sludge treatment technology exploiting data from an existing plant located in central Italy, a second scenario that involves the implementation of MBR technology applied to the baseline scenario, and finally a third scenario that consists of the addition of an anaerobic digester that allows energy recovery from biogas production, followed by a photovoltaic plant capable of supplying the plant energy demand. Global warming potential, eutrophication, and acidification are the environmental categories considered most relevant to emissions. The results showed that the effluent had the highest impact in terms of CO2 equivalent in all three situations due to the presence of N2O. Since emissions from biological processes, transportation, and wastewater are almost similar in all three scenarios, it is preferable to focus on the environmental impacts associated with energy consumption. The third scenario involves careful resource management and the use of treatment technologies that allow for a reduction in the use of nonrenewable energy sources in favor of renewable ones. [ABSTRACT FROM AUTHOR]

The diffusion of electric vehicles is fundamental for transport sector decarbonization. However, a major concern about electric vehicles is their compatibility with power grids. Adopting a whole-power-system approach, this work presents a comprehensive analysis of the impacts and benefits of electric vehicles' diffusion on a national power system, i.e., Italy. Demand and flexibility profiles are estimated with a detailed review of the literature on the topic, allowing us to put forward reliable charging profiles and the resulting flexibility, compatible with the Italian regulatory framework. Distribution network planning and power system dispatching are handled with dedicated models, while the uncertainty associated with EV charging behavior is managed with a Monte Carlo approach. The novelty of this study is considering a nationwide context, considering both transmission and distribution systems, and proposing a set of policies suitable for enabling flexibility provision. The results show that the power and energy demand created by the spread of EVs will have localized impacts on power and voltage limits of the distribution network, while the consequences for transmission grids and dispatching will be negligible. In 2030 scenarios, smart charging reduces grid elements' violations (−23%, −100%), dispatching costs (−43%), and RES curtailment (−50%). [ABSTRACT FROM AUTHOR]

Incentive policies play a crucial role in encouraging the adoption of renewable energy sources and energy efficiency measures. This study analyzes and compares the incentives for energy transition in the South Tyrol region of Italy using a marginal abatement cost (MAC) curve constructed with an expert-based approach. The incentives for residential energy efficiency, mobility, and boiler replacement are characterized based on assumptions for costs, energy savings, and parameters. The resulting expert-based MAC curve analysis reveals boiler replacement incentives to be the most cost-effective, yielding CO2 reductions at the lowest cost but with limited potential as the incentive is limited to apartment blocks that are not in district heating areas. Mobility incentives enabling electric vehicle adoption have the highest CO2 reduction potential, albeit at higher costs per ton abated. Residential energy efficiency incentives fall between the two for cost-effectiveness and potential. The MAC curve approach provides a useful comparison of cost-effectiveness versus potential, guiding policy prioritization. This techno-economic assessment methodology can be applied to other regions pursuing energy transition. Overall, a balanced policy mix encompassing transport, buildings, and heating is required for comprehensive low-carbon transition. [ABSTRACT FROM AUTHOR]

• Data about DHW in residential buildings were collected by survey in Southern Italy. • Contextual and personal factors influencing DHW usage were considered. • Descriptive statistics were performed to characterize DHW by climatic zone. • Inferential statistics were conducted to discover DHW usage patterns. • Four clusters of dwellings were identified considering DHW daily usage hours. In European efficient buildings, the share of energy use for DHW is a significant percentage of the heat requirement. The evaluation of DHW energy demand and consumption patterns has been neglected in the past and studies are located in Northern countries. This paper presents a survey conducted in Southern Italy. Descriptive statistics were performed to characterize DHW production by climatic zone. Inferential statistics were conducted to discover significant contextual and personal variables and identify usage groups. The most used energy source was biomass (49.3%), followed by methane gas (37.7%). Fireplaces were installed in the coldest zone, in detached houses, more in small municipalities (36%), and low-income families (32%). Solar systems were in 8% of dwellings having income higher than 28000€. Four clusters of dwellings were identified considering the daily usage hours. The eldest and less numerous households fell into the cluster with the lowest usage (3.5 h). Households with a percentage <25% of unemployed components had more probability to belong to clusters with more DHW usages. The paper contributes to fill the investigation in the Mediterranean area and provides a systematic approach to expand the limited knowledge about the influencing factors on the DHW production and usage. [ABSTRACT FROM AUTHOR]

[Display omitted] • Dynamic evaluation of economic and energy benefits due to thermostatic valve installation. • Dynamic evaluation of economic and energy benefits due to heat metering installation. • The adoption of both thermostatic valves and heat metering least to a payback period lower than 2 years. • Analysis carried out considering several shapes of typical building. The aim of this paper is to propose a novel approach in order to accurately calculate the energy and economic savings due to the use of heat metering and thermostatic valves in residential buildings. The paper aims at proving that the present simplified approaches used in European Legislation may lead to significantly underestimate the profitability of this technology. The study is developed for four different typologies of buildings located in the city of Naples (South of Italy), including their geometrical and thermophysical properties. The buildings are first modelled in Google Sketchup and subsequently linked to the TRNSYS environment, which also includes a detailed model of the piping systems. The models allow one to evaluate, for every period of the year, energy demand, energy supplied by radiators, heat gains, transmission, etc. The developed models are used to calculate energy demands for three scenarios for each type of building: centralized heating systems not equipped with heat metering; thermostatic valves without heat metering; heat metering and thermostatic valves. The possible savings related to thermostatic valves and heat metering are estimated using the developed model. The results are compared with the ones provided by the Italian Standards. Results show that the thermostatic valves adoption leads to a significant reduction, up to 50%, of the thermal energy demand of the residential buildings and that all the proposed systems exhibit a remarkable economic profitability, with a payback period lower than 1.7 years. [ABSTRACT FROM AUTHOR]

Building energy requalification in Italy and Europe has been much discussed in recent years due to the high percentage of existing buildings with poor energy performance. In this context, it is useful to obtain a user-friendly and fast tool to predict the thermal energy demand (TED) for space conditioning and the related primary energy consumption (PEC) as a function of climatic stress. In this study, the SLABE methodology (simulation-based large-scale uncertainty/sensitivity analysis of building energy performance) is used to simulate representative Italian buildings, varying parameters such as geometry, envelope and HVAC (heating, ventilating and space conditioning) systems. MATLAB® in combination with EnergyPlus is used to analyze 200 buildings belonging to two structural types (multi-family buildings and apartment blocks) built in 1961–1975. Nine scenarios (as-built scenarios and eight retrofit ones) are investigated in 63 climatic locations. A regression analysis shows that the classical HDDs (heating degree days) approach cannot give an accurate prediction of TED because solar radiation is not accounted for. Thus, new climatic indices are developed alongside solar radiation, including the heating stress index (HSI), the cooling stress index (CSI) and the yearly climatic stress index (YCSI). The purpose of our work is to obtain climatic stress curves for the prediction of TED and PEC. Testing of this novel approach is performed by comparison with another building energy simulation tool, showing a low discrepancy, i.e., the coefficient of variation of the root mean square error is between 12% and 28%, which confirms certain reliability of the approach here proposed. [ABSTRACT FROM AUTHOR]

In Italy, a large part of the buildings classified as historical–artistic heritage is in a state of degradation and requires urgent interventions. Among the needs, a reduction in the high energy consumption and an improvement of the indoor comfort are mandatory. The case study of the "Ex Institute of Zoology of Palermo" shows how it is possible to achieve a reduction in energy consumption and preserve the building's historicity through the estimation of energy loads and the subsequent processing. To quantify the energy savings of the structure, it was necessary to follow a few steps, namely an inspection of the building and an evaluation of its consumption. To elaborate a correct energy analysis, the thermal conductance was calculated by considering measurements over a period of 60 days and proceeding with the calculation of the transmittance. The resulting data are imported in the energy model developed with the TERMUS BIM software. In the case study, a potential energy saving equal to 35% of the current energy consumption can be avoided by replacing the lamps with LED ones, installing photovoltaic panels, replacing the heat pumps with a centralized system and the current fixtures with double thermal break fixtures. These interventions are implemented in compliance with the architectural peculiarities. [ABSTRACT FROM AUTHOR]

Biochar can be useful to overcome several environmental challenges in different sectors of energy, industry, and agriculture. However, there are currently only a limited number of studies with the employment of biochar for various applications and their environmental impacts. This study develops an LCA framework to evaluate the climate impacts of biochar production and its applications in soil enhancement and as a substitute for coal-based fuels in steel industries and then compares it with conventional biomass usage for energy production for Sweden, Italy, and Poland. Various pyrolysis operating temperatures are also considered to determine the optimal conditions for each location. The results show that biomass pyrolysis with biochar usage in the agricultural sector has the least environmental impact with the most significant potential in Poland followed by Italy. lower temperatures (around 350 °C) are more favorable for Sweden in terms of CO2 emissions, due to the country's renewable energy-based electrical system. Low to moderate temperatures (350–500 °C) are found to be optimal for pyrolysis temperature in Italy, while higher temperatures (around 650 °C) yield the highest GHG reduction for both biochar applications in Poland. [ABSTRACT FROM AUTHOR]

The 2030 zero-net emission target in the E.U. demands a significant improvement in the energy performance of the building stock. This study analyses the adoption of connected thermostats and Home energy-management system solutions (HEMS) as an effective means to tackle the residential energy footprint. It reviews the main features of HEMS systems in terms of technology, cross-study performances, and the obstacles to widespread adoption; the study adopts the case-study methodology to examine the impact on the Italian real estate stock at a regional level. A matrix of adoption scenarios assesses the potential benefits of global residential energy savings, weighted by local climatic variations, dimension, number of single dwellings, and average primary energy reduction per household. Results demonstrate that all adoption scenarios dramatically reduce residential energy consumption, outperforming the E.U. targets for Italy by 2030. [ABSTRACT FROM AUTHOR]

The construction sector contributes to 8% of carbon dioxide emissions, most of them caused by clinker production: in recent years, the efforts to reduce environmental impacts are growing. This paper investigates the environmental performances of clinker production and the factors driving emissions. For this purpose, the environmental impacts of 41 different grey clinkers produced in Italy from 2016 to 2021 certified by a third party according to the European standard EN 15804 have been assessed. Three input datasets (i.e., energy consumption, raw materials, and transport) have been investigated to identify the most significant variables that affected the environmental impact categories in the period 2016–2020: a stepwise regression allowed the identification of the optimal predictors to be included in the multiple regression models. The most significant variables are pet coke, fossil fuels, natural raw materials, and lorry transport. The identified models have been validated having regard to 2021 data. Therefore, for each impact category, multiple positive and negative dependencies which bear an effect on the environmental results have been quantified. The output provides proven quantitative results that can support cement producers to develop low-impacting clinker recipes. [ABSTRACT FROM AUTHOR]

Public acceptability appears an essential condition for the success of low-carbon transition policies. In this paper, we investigate the role of self-interest on citizens' preferences for the distribution of costs and environmental benefits of energy efficiency policies. Using a discrete choice experiment on nationally representative household samples of Sweden, Italy, and the United Kingdom, we first investigate preferences for national burden-sharing rules and for the distribution of environmental benefits accruing primarily in rural and/or urban areas. We examine the role of self-interest and self-serving bias in a correlational manner by looking at the effects of income and location of residency on preferences for these policy attributes. Moreover, we investigate the effect of self-serving bias on preferences for burden-sharing rules in a causal manner by experimentally priming randomly assigned groups of participants to feel either rich or poor. Our results suggest that the accountability rule is the most popular and the equal-amount rule the least popular burden-sharing rule. Further, policies with environmental benefits accruing primarily in rural areas are least preferred. We find some evidence for self-interest, especially through our correlational approach. Finally, across country samples, our results reveal heterogeneity in preferences for policy attributes and in the prevalence of self-interest. [ABSTRACT FROM AUTHOR]

The new European targets of achieving net zero emissions by 2050 have spurred Italy to aim for a 30% reduction in emissions by 2030, compared with 2005 levels. This goal will be achieved through the promotion of renewable energy sources and energy savings in the residential sector, which remains one of the main sectors accountable for total energy consumption, mainly for heating. This study aims at investigating the potential of some retrofit measures implemented in the Umbria Region, chosen as a case study, to reach the goal by 2030. Using parametric energy simulations with the standard calculation method and artificial neural networks (ANN), the energy consumption of Umbria's building stock and potential CO2 reductions were assessed. Results showed that with current energy policies, a reduction of 28% could be achieved, which is below the goal by 2030, while ANN integration within energy strategies could allow reaching it as early as 2025 or 2029, depending on the restriction set to the ANN and the extent of current energy policies. This study confirmed the potential benefits of using advanced technology in achieving national environmental goals, highlighting that they could be essential tools to be integrated into energy policies to accelerate progress towards ambitious climate goals. [ABSTRACT FROM AUTHOR]

• An integrated energy-economic analysis of Net ZEB office buildings was proposed. • A thorough discussion on the energy balance was provided for Italian climate zones. • Energy grid integrations, self-consumption, storage and losses were analyzed. • The cost assessment of office buildings was performed and compared to state-of-art. • The energy-economic benefit of a new Net ZEB office in Italy was demonstrated. Recently, the built environment has become one of the leading sectors in the challenge of decarbonization and energy consumption reduction. Because of the specific use and the complexity of the typological, architectural, and technical characteristics, non-residential buildings represent a challenge to overcome the nearly Zero Energy Building standard and to achieve the objective of Zero or Net Zero Energy Buildings. It is desirable that the energy produced in situ from renewable sources totally covers the energy demand (ZEB); alternatively, the amount of energy self-produced and dispatched into the grid must be greater than (or equal to) the energy withdrawn from the grid (Net ZEB). At the same time, it is necessary not to neglect the economic aspects. The aim of this work is to propose an integrated energy-economic analysis to demonstrate the actual feasibility of new Net ZEB offices in different Italian climate zones. Thus, the energy analysis of a reference building, based on consolidated and cost-effective envelope and HVAC systems, has been carried out through dynamic simulations. The photovoltaic field located on the roof provides the energy needed for lighting, appliances, and HVAC. The obtained results are the energy demand and the energy production from renewable sources for the case study in each Italian climate zone. Moreover, the paper discusses the complexity of the annual energy balance, considering contributions such as grid integrations, self-consumption, energy stored and losses. Finally, the cost assessment of the proposed building has been carried out and compared to the state-of-art, pointing out the economic feasibility of the Net ZEB. [ABSTRACT FROM AUTHOR]

A large portion of aging existing buildings are susceptible to significant structural damage during earthquakes and suffer from poor energy performance. When considering how to improve the seismic performance and energy efficiency of these structures, retrofitting has been shown to be a more attractive alternative compared to complete demolition and reconstruction. Not only is retrofitting generally preferable from an economic perspective, but it also typically has lower levels of social and environmental impact as well. Together, these three aspects (economic, social, and environmental) form the so-called three pillars of sustainability. Recently, research efforts have begun to focus on developments in combined and integrated seismic and energy retrofit frameworks and techniques, showing that investing in combined retrofitting schemes is often more cost effective than conducting either energy-efficiency or seismic retrofitting alone. As new national and transnational policies place greater emphasis on the environmental impact of the built environment, it is crucial that combined retrofit schemes be evaluated in a comprehensive manner that allows for the selection of optimal schemes when a range of key sustainability-related decision variables (DVs) are considered. This study investigated the selection of a life cycle assessment (LCA)-based optimal combination of seismic and energy-efficiency retrofit schemes for an existing reinforced concrete case-study building in Italy. The seismic performance of the retrofit schemes was evaluated using detailed nonlinear time-history analysis and the Pacific Earthquake Engineering Research Centre's performance-based earthquake engineering (PEER-PBEE) framework, and the resulting economic costs and environmental impacts were incorporated into the LCA methodology. A detailed energy assessment was performed for each retrofit scheme so that the costs and environmental impacts associated with the operation of the building could be included in the LCA. Subsequently, the characteristics of each retrofit scheme were evaluated for a range of additional DVs, which encompassed the three pillars of sustainability. Finally, a multicriteria decision-making process was used to evaluate the optimal combination of seismic and energy retrofit schemes for several locations exhibiting different combinations of seismicity and climatic conditions. The results of this study provide insight into which combinations of seismic and energy efficiency retrofit measures can produce optimal solutions within the constraints set by decision makers and illustrate how assessments of both seismic and energy retrofit interventions can be implemented in the future. [ABSTRACT FROM AUTHOR]

Hospitals are among the most energy-intensive buildings in the service industry. Developing energy management strategies could lead to important energy savings, and it must pass through detailed analyses of each specific activity's energy requirement. The present study aims to find a healthcare facility's main energy drivers and develop an offline monitoring method applicable to future healthcare energy requirements. A Multiple Linear Regression model has been realised to define the standard energy consumption based on the year 2019, allowing a Cumulative Sum of differences control chart including the 2020 energy consumption data. The proposed method allows finding variations between actual and standard building energy demands, a useful tool to monitor the effectiveness of energy system control strategies. [ABSTRACT FROM AUTHOR]

The increase in the share of renewable energy in the power generation mix plays a pivotal role in the decarbonisation of power systems, thus facilitating the achievement of international and national targets for reducing greenhouse gas emissions and addressing climate change. Due to the intermittent nature of variable renewable energy, the integration of these sources in power systems requires investments in additional solutions and setting strategies to ensure grid stability and reliability. For that purpose, a prospective modelling was applied to the relatively isolated island named Procida, located in the gulf of Naples in Italy, through the bottom-up optimization model TIMES-Procida for a long-term energy plan where technical solutions, i.e., deployment of photovoltaics on rooftops and storage, and policy scenarios, i.e., energy efficiency, were used to analyse the evolution of the energy system. The introduction of renewable energy could be much more relevant when dealing with islands; they appear as decisive territories for experimentation and analysis of the transformation of all power systems. At year 2050, our results address decarbonisation and energy autonomy. They show that only with high shares of renewable energy will the territory see a noticeable decarbonisation of its economic sectors (up to 24%) and a decreasing dependency on imports (−16.6% compared to low renewable integration). By comparing the results of scenarios including or lacking storage solutions, we showcased how this reflected on the investments in PV and on grid congestion relief. [ABSTRACT FROM AUTHOR]

[Display omitted] • A research topic relatively new but with an increase interest in the last five years. • The largest scientific contribution from China, Australia and Italy. • The main journals in the field Building and Environment and Energy and Buildings. • Three main direction of research: thermal energy performance of buildings, ecological benefits and reducing the urban heat. • The main limitation of using green walls is the high cost of installing and maintenance. The continuous state of development of the human society imply a big effort and demand to generate and use more and more energy to power our lifestyle. The impact of human activity has negative effects on the environment and thus solutions to maintain or increase our development rate but in the same time to decrease the pressure on the environment must be developed. In this context, the purpose of this paper is to investigate if the use of green walls systems can be a solution to decrease the energy demands in buildings. The investigation include a bibliometric literature research, a scientometric analysis and an in-depth discussion. The data used for the research were obtained by interrogating the ISI Web of Science and Scopus databases, were selected using the guidelines of the PRISMA method and processed with the help of VOSviewer and Bibliometrix software. The research results indicate an increase interest in this topic in the last five years and that the use of vegetation in the constructed grey areas can bring a lot of benefits especially from environmental point of view. Green walls can be a solution to decrease the temperature on the wall surface in hot summer days and to prevent heat loses in the winter time, and thus have beneficial effects on the amount of energy required to maintain a proper interior temperature. The main limitation of using green walls is given by higher costs of installing and maintain the vegetation on walls, thus, finding new more economical, systems of green walls must be developed in the future. Considering all of this it can be state that green wall systems have the potential to become good solutions not just to improve the energy efficiency of buildings but also to create more sustainable urban areas. [ABSTRACT FROM AUTHOR]

In recent years, a rapid increase in the adoption of renewable energy sources and in the transition from a centralized electricity generation system to an increasingly distributed one has occurred. Within this scenario, in line with the European directives for achieving the objectives in the field of energy transition and climate change, energy communities are seen as potential contributors. The purpose of this work is to analyze the application potential of the energy community concept associated with district heating networks, leading to better overall energy-economic performance. This was demonstrated for a specific energy community in Italy, and it can be achieved by maximizing internal energy sharing—resulting from the electricity surplus generated by the photovoltaic system—and adopting different strategies that include heat pumps in order to maximize self-consumption and self-sufficiency, as well as to evaluate the most efficient investment in economic terms by exploiting the incentive tariff on shared energy. The results show that the performance of the system can be improved with the proposed design, achieving a significant reduction in the system's energy demand, emissions and costs: compared to the reference case, the use of photovoltaics reduces primary energy demand by approximately 11%, while the addition of the energy community configuration allows emissions to be reduced by nearly 12%, with no additional investment. [ABSTRACT FROM AUTHOR]

Worldwide, the use of fossil fuels covers almost 80% of the entire energy needs. In the European Union (EU), 2020 represents a watershed: for the first time, renewables were the main source of electricity. In Italy, the latest surveys demonstrate an increase in the use of alternative energy sources. European legislative framework highlights the importance of these new trends encouraging (and imposing) the use of renewables. The necessity to become more proactive in the energy production–consumption process and in the achievement of sustainability targets brings people to create Energy Communities (ECs) to manage their own energy supply chain. The authors present an overview of the main legislative framework in the EU and Italy in relation to ECs, analyzing the energy consumption, the electricity and heat energy production potentiality, and the energy balance in a portion of an Italian middle-size city in the Milan metropolitan area. Moreover, they underline the technical, regulatory, and planning possibilities to achieve energy independence, exchanging energy among the selected urban district when there is a surplus in production. Lastly, the authors underline the strengths and barriers to the development of ECs. [ABSTRACT FROM AUTHOR]