Search

Purpose : The use of green and eco-natural fibers due to availability, biodegradability, reasonable cost, and non-toxic effects are known as potential acoustic materials in research. Nevertheless, in this area, the use of chemical treatment in natural fibers as an effective strategy to improve the overall properties and acoustic performance is faced with limitations. So that the current paper aims to investigate the effect of alkali treatment on the mechanical and acoustical properties of jute fibers and evaluation of its applicability in noise pollution control. Methods: To determine the effect of alkali treatment on the sound absorption behavior of jute fibers, a sufficient amount of both types of fibers (raw and treated) were used to the fabrication of acoustic samples with thicknesses of 30, 40 and 50 mm at a density of 200 kg/m3. The acoustic evaluation was measured by the Impedance tube system according to transfer function method using by the standard ISO 10534–2. The morphological and tensile properties of fibers were evaluated by the Scanning Electron Microscopy (SEM) and tensile test (ASTM C1557-14 standard). Moreover, Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD) were used to study and compare the chemical properties of raw and treated fibers. Results: The result showed that the mean tensile strength and crystallinity index (CI) of treated fibers comparing with raw fibers increased by 61.66% and 3.26% respectively. The use of Alkali treatment helped to improve sound absorption performance of jute fibers with different thicknesses. Furthermore, noise reduction rate (NRC) in treated acoustic samples compared to untreated with a thickness of 50 mm increased from 0.66 to 0.69. Conclusion: Finally, the alkali treatment has enhanced the properties of jute fibers and confirmed the applicability of these fibers in acoustic absorption. [ABSTRACT FROM AUTHOR]

The sensitivity of phase-sensitive detectors, such as piezoelectric detectors, becomes increasingly directional as the detector element size increases. In contrast, pyroelectric sensors, which are phase-insensitive, retain their omni-directionality even for large element sizes, although they have significantly poorer temporal resolution. This study uses numerical models to examine whether phaseinsensitive detectors can be used advantageously in ultrasound tomography, specifically absorption tomography, when the number of detectors is sparse. We present measurement models for phasesensitive and phase-insensitive sensors and compare the quality of the absorption reconstructions between these sensor types based on relative error and image contrast metrics. We perform the inversion using synthetic data with a Jacobian-based linearized matrix inversion approach. [ABSTRACT FROM AUTHOR]

Acoustic absorption and thermal insulation play a key role in modern buildings to make living comfortable and energy-saving. This paper aims to study the workability, physical and mechanical properties, thermal conductivity, and acoustic absorption of modified geopolymer concrete (GPC) with various types of lightweight aggregates (LWA) such as extruded polystyrene foam beads waste (EPS), vermiculite, or lightweight expanded clay aggregate (LECA). The mixtures of geopolymer concrete have been modified by substituting for the ordinary aggregates (dolomite) by volume with various ratios of 0, 25, 50, 75, and 100% for each type of LWA. Besides, the mechanisms of specimens were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and mapping. The results illustrated that the compressive strength values range between 8.5 and 47.50 MPa. The hardened density of concrete was between 1500 and 2450 kg/m3, and thermal conductivity was between 0.45 and 1.16 W/m.K. Geopolymer concrete was considered an acoustic absorption and thermally insulating material. Geopolymer concrete was considered an acoustic absorption and thermally insulating material. EPS, vermiculite, and LECA will be beneficial for applications in lightweight geopolymer concrete due to their capability to reduce weight and excellent thermal conductivity, and the property of improving acoustic absorption. The mechanical results indicated that 25% LECA was the best compared with the ratios of other LWA and gained 35.0, 2.7, and 4.3 MPa of compressive, splitting tensile and flexural strength, respectively. It had positive workability; the thermal conductivity was 1.1 W/m.K, and hardened density was decreased to 10% compared to the control. In addition, LECA is considered the superior and suitable material for acoustic absorption compared with other aggregates. [ABSTRACT FROM AUTHOR]

External sun shading devices are increasingly used in sustainable buildings to reduce the greenhouse effect in the summer and the glare effect due to direct solar irradiation through transparent surfaces. The acoustic effects of these devices have been investigated in recent studies that suggest the possibility of optimising these elements to improve acoustic comfort in indoor environments, even with open windows. Nevertheless, there are few studies that analyse the combined effect of these devices on acoustic attenuation and improved daylighting. In this paper, the results of acoustics and daylighting simulations are reported, considering different dimensions, distances of the louvres and orientations of the façade. The main results of previous works concerning the effect of lining the bottom side of each louvre with sound-absorbing material are also briefly summarised. The acoustic effects of different configurations of the louvres are evaluated in terms of Insertion Loss in the façade plane. For the lighting simulations (daylight factor, daylighting uniformity and daylight glare probability), the variation of the shielding effect is studied considering the spacing between the louvres and the orientation of the façade for different times and seasons for latitude in the South of Europe. [ABSTRACT FROM AUTHOR]

The aim of this paper is to design a novel asphalt mixture capable of reducing tyre/pavement interaction noise for urban roads at speeds around 50 km/h. To this end, various mechanical and functional tests were carried out both in the laboratory and on a real road in the city of Florence. The asphalt mixture developed improves the noise reduction properties without compromising its mechanical performance or neglecting its rolling and skid resistance. To this end, various mechanical tests were carried out in the laboratory, including water sensitivity or wheel tracking tests, as well as functional tests relating to texture, flow resistance and sound absorption. Full-scale measurements were carried out using the CPX method. The result of the study was a novel asphalt mixture that reduced noise by 3 dB compared to a conventional road.

Cellulose aerogels have great prospects for noise reduction applications due to their sustainable value and superior 3D interconnected porous structures. The drying principle is a crucial factor in the preparation process for developing high-performance aerogels, particularly with respect to achieving high acoustic absorption properties. In this study, multifunctional cellulose nanocrystal (CNC) aerogels were conveniently prepared using two distinct freeze-drying principles: refrigerator conventional freezing (RCF) and liquid nitrogen unidirectional freezing (LnUF). The results indicate that the rapid RCF process resulted in a denser CNC aerogel structure with disordered larger pores, causing a stronger compressive performance (Young's modulus of 40 kPa). On the contrary, the LnUF process constructed ordered structures of CNC aerogels with a lower bulk density (0.03 g/cm3) and smaller apertures, resulting in better thermal stability, higher diffuse reflection across visible light, and especially increased acoustic absorption performance at low–mid frequencies (600–3000 Hz). Moreover, the dissipation mechanism of sound energy in the fabricated CNC aerogels is predicted by a designed porous media model. This work not only paves the way for optimizing the performance of aerogels through structure control, but also provides a new perspective for developing sustainable and efficient acoustic absorptive materials for a wide range of applications. [ABSTRACT FROM AUTHOR]

Kenaf fibers have long been utilized because of their remarkable properties, such as availability, durability, and strength. Recently, they have also been used as sound-absorbing composites for noise control purposes. This paper investigates the possibility of improving the tensile strength of kenaf fibers through optimizing the alkaline treatment process. It also considers the effects of such optimization on the acoustic absorption coefficients of the samples fabricated from these treated kenaf fibers as well as the applicability of the numerical model to predict the acoustic absorption. Having employed the response surface methodology (RSM) to optimize the alkaline treatment process and achieve optimal conditions for the kenaf fibers, the scanning electron microscopy (SEM) and tensile test were used to study and compare the morphological and tensile properties of raw fibers (nonoptimal) and the fibers treated in optimal conditions. Several cylindrical samples with constant thickness and density (30 mm and 200 kg/m3) were then made of fibers treated in optimal conditions. The sound absorption coefficient, porosity, and airflow resistivity of these samples were measured based using ISO 10534–2 (impedance tube system), SEM and ASTM C423-09A, respectively. The results demonstrated that the tensile strength of optimally treated fibers increased by 182.39%. The acoustic absorption coefficients of the samples fabricated from these fibers were also higher at all frequencies (low-, mid-, and high-frequency range) compared with samples made of untreated fibers in a way that the Sound Absorption Average value of the former increased by 17.97%. Moreover, it was found that inverted Dunn and Davern model via Nelder-Mead simplex method well follows the sound absorption pattern from the experimental results in the overall frequency range. The use of multifaceted improvement approaches for natural materials such as kenaf fibers increases the usability of these materials as sustainable and eco-friendly alternatives in the engineering process of manufacturing sound-absorbing materials.

It is well-known that the acoustic stealth of an underwater vehicle composed of a non-watertight structure has been facing severe challenges. The origins of this effect are associated with the fact that the coupling between the water and the mechanical structure is not negligible because both sides are in the water. Along these lines, the idea of forward absorption and backward reflection was proposed in this work to address this issue. More specifically, a composite underwater acoustic metamaterial (AM) was designed based on different layers, namely a sound absorption layer and a sound insulation layer from the outside to the inside. The sound absorption layer was made of a soft rubber matrix with embedded steel scatterers (ESs) to enrich the coupled resonance effects, while the sound insulation layer was composed of hard rubber with a built-in cavity to improve the impedance mismatching between the AM and the water. The impact of the number and thickness of the embedded ESs on the acoustic performance of the AM was also thoroughly investigated via a finite element method (FEM). A fast non-dominated genetic algorithm (NAGA-II) with elite strategy was used to optimize the position and the size of the ESs. The optimization results revealed the high absorption at the forward incidence and the high reflection at the backward incidence. Thus, our work provides a novel and effective approach for improving the acoustic stealth of underwater vehicles composed of non-watertight structures. [ABSTRACT FROM AUTHOR]

External sun shading devices are increasingly used in sustainable buildings to reduce the greenhouse effect in the summer and the glare effect due to direct solar irradiation through transparent surfaces. The acoustic effects of these devices have been investigated in recent studies that suggest the possibility of optimising these elements to improve acoustic comfort in indoor environments, even with open windows. Nevertheless, there are few studies that analyse the combined effect of these devices on acoustic attenuation and improved daylighting. In this paper, the results of acoustics and daylighting simulations are reported, considering different dimensions, distances of the louvres and orientations of the façade. The main results of previous works concerning the effect of lining the bottom side of each louvre with sound-absorbing material are also briefly summarised. The acoustic effects of different configurations of the louvres are evaluated in terms of Insertion Loss in the façade plane. For the lighting simulations (daylight factor, daylighting uniformity and daylight glare probability), the variation of the shielding effect is studied considering the spacing between the louvres and the orientation of the façade for different times and seasons for latitude in the South of Europe.

Research and development of energy-efficient materials have been essential for sustainable infrastructure growth. A considerable amount of money is being spent on various energy stabilization techniques worldwide to attain thermal comfort in buildings. Thus, lowering the energy demand through green materials is vital to save energy and the environment. In this paper, a new form of Structural Insulated Panel (SIP) has been developed and referred to as Ferro Cellular Lightweight Concrete Insulated Panel (FCIP). Comparative thermal efficiency and acoustic performance of FCIP and brick masonry walls have been tested experimentally. The thermal results show that FCIP allows just 2 deg C rise in the internal temperature of the room chamber in two hours, whereas the brick masonry allows 9.5 deg C rise in the internal temperature of the room chamber for the same period. Similarly, the acoustic results show that FCIP has 0.85 sound absorption coefficient compared to 0.2 for brick masonry wall. Further, the cost-benefit analysis was conducted based on the electricity consumption results of a building produced by the eQuest energy simulation program. The outcome shows that the building’s lifetime running cost gets reduced to 50% when FCIP replaces the concrete/brick masonry envelope.

Polyurethane foams with a hybrid structure between closed cell and open cell were fabricated and fully characterized. Sound absorption measurements were carried out in order to assess their acoustic performance at different frequency ranges. The cellular structure of these systems was studied in detail by defining some novel structural parameters that characterize the cell wall openings such as the average surface of holes (Sh), the number of holes (h), and the area percentage thereof (%HCW). Therefore, these parameters allow to analyze quantitatively the effect of different structural factors on the acoustic absorption performance. It has been found that the parameters under study have a remarkable influence on the normalized acoustic absorption coefficient at different frequency ranges. In particular, it has been demonstrated that increasing the surface of the holes and the percentage of holes in the cell walls allows increasing the acoustic absorption of these types of foams, a promising statement for developing highly efficient acoustic insulators. Additionally, we could determine that a suitable minimum value of hole surface to reach the highest sound dissipation for these samples exists. [ABSTRACT FROM AUTHOR]

Flame-retardant water-blown rigid polyurethane foams (RPUFs) modified by ammonium polyphosphate (APP) and diethyl ethylphosphonate (DEEP) were synthesized by a one-pot free-rising method. We performed scanning electron microscopy (SEM), compression strength tests, acoustic absorption measurements and thermogravimetric analysis, as well as limited oxygen index, vertical burning and cone calorimeter tests to investigate the mechanical properties, acoustic performance and flame retardancy of the foams. SEM confirmed that the open-cell structures of the foams were successfully constructed with the introduction of a cell-opening agent. Upon using 20 php APP, the average acoustic absorption coefficient of the foam reached 0.535 in an acoustic frequency range of 1500–5000 Hz. The results of thermogravimetric analysis demonstrated that the incorporation of APP and DEEP can effectively restrain mass loss of RPUFs during pyrolysis. In particular, the compressive strength of a foam composite containing 5 php APP and 15 php DEEP increased to 188.77 kPa and the LOI value reached 24.9%. In a vertical burning test and a cone calorimeter test, the joint use of APP and DEEP endowed RPUFs with a V-0 rating and they attained a THR value of 23.43 MJ/m2. Moreover, the addition of APP improved the acoustic absorption performance of the foam, verified by acoustic absorption measurements. Considering potential applications, the formulation containing 15 php APP and 5 php DEEP could be used in the preparation of a new flame-retardant acoustic absorption rigid polyurethane foam. [ABSTRACT FROM AUTHOR]

Environmentally sustainable cement mortars containing wheat straw (Southern Italy, Apulia region) of different length and dosage and perlite beads as aggregates were prepared and characterised by rheological, thermal, acoustic, mechanical, optical and microstructural tests. A complete replacement of the conventional sand was carried out. Composites with bare straw (S), perlite (P), and with a mixture of inorganic and organic aggregates (P/S), were characterised and compared with the properties of conventional sand mortar. It was observed that the straw fresh composites showed a decrease in workability with fibre length decrease and with increase in straw volume, while the conglomerates with bare perlite, and with the aggregate mixture, showed similar consistency to the control. The thermal insulation of the straw mortars was extremely high compared to the sand reference (85–90%), as was the acoustic absorption, especially in the 500–1000 Hz range. These results were attributed to the high porosity of these composites and showed enhancement of these properties with decrease in straw length and increase in straw volume. The bare perlite sample showed the lowest thermal insulation and acoustic absorption, being less porous than the former composites, while intermediate values were obtained with the P/S samples. The mechanical performance of the straw composites increased with length of the fibres and decreased with fibre dosage. The addition of expanded perlite to the mixture produced mortars with an improvement in mechanical strength and negligible modification of thermal properties. Straw mortars showed discrete cracks after failure, without separation of the two parts of the specimens, due to the aggregate tensile strength which influenced the impact compression tests. Preliminary observations of the stability of the mortars showed that, more than one year from preparation, the conglomerates did not show detectable signs of degradation. [ABSTRACT FROM AUTHOR]