Search

This paper presents a method to analyze and improve the set of equations constituting a rainfall‐runoff model structure based on a combination of a data assimilation algorithm and polynomial updates to the state equations. The method, which we have called "Data Assimilation Informed model Structure Improvement" (DAISI) is generic, modular, and demonstrated with an application to the GR2M model and 201 catchments in South‐East Australia. Our results show that the updated model generated with DAISI generally performed better for all metrics considered included Kling‐Gupta Efficiency, NSE on log transform flow and flow duration curve bias. In addition, the elasticity of modeled runoff to rainfall is higher in the updated model, which suggests that the structural changes could have a significant impact on climate change simulations. Finally, the DAISI diagnostic identified a reduced number of update configurations in the GR2M structure with distinct regional patterns in three sub‐regions of the modeling domain (Western Victoria, central region, and Northern New South Wales). These configurations correspond to specific polynomials of the state variables that could be used to improve equations in a revised model. Several potential improvements of DAISI are proposed including the use of additional observed variables such as actual evapotranspiration to better constrain internal model fluxes. Plain Language Summary: This paper presents a data‐driven method to improve rainfall‐runoff models used to generate future water resources scenario in climate change studies. The method, which we have called "Data Assimilation Informed model Structure Improvement" (DAISI) is generic, modular, and demonstrated with an application to monthly streamflow simulations over a large data set of catchments in South‐East Australia. Our results show that DAISI improves model performance for a wide range of metrics and increases the sensitivity of the model to climate inputs, which is critical in climate change scenarios. Finally, the improvements identified by DAISI take a simple mathematical form with distinct regional patterns in three sub‐regions of the study domain (Western Victoria, central region, and Northern New South Wales). Several improvements of DAISI are discussed including the inclusion of additional observed variables such as evapotranspiration to better constrain model simulations. Key Points: Data Assimilation Informed model Structure Improvement method diagnoses hydrological model structures by combining data assimilation with a polynomial update of state equationsThe method was applied to the GR2M rainfall‐runoff model with significantly improved streamflow simulations in 201 Australian catchmentsThe method identified updates to state equations with marked regional characteristics that could guide future improvement of GR2M [ABSTRACT FROM AUTHOR]

Summary: We synthesise the findings from 10 years of ecological restoration in the Midlands of Tasmania, Australia, captured in the series of 14 papers in this special issue of Ecological Management and Restoration. The papers illustrate how expertise from disciplines as diverse as law, economics, social sciences, the arts, education, zoology, botany, genetics, climate modelling, agriculture, spatial sciences and fire ecology are necessary to address the complex social, ecological and financial questions that underpin restoration ecology. We highlight the complexity of the task, the multi‐disciplinary and collaborative approach needed, the importance of science to inform restoration practice and the problem of achieving functional connectivity. We also outline steps that need to be taken in the next 10 years. Together, the outcomes and recommendations from these studies provide a template for restoration in similar highly cleared and degraded agricultural landscapes affected by climate change in Australia and internationally. [ABSTRACT FROM AUTHOR]

We assess the impact of three bias correction approaches on present day means and extremes, and climate change signal, for six climate variables (precipitation, minimum and maximum temperature, radiation, vapour pressure and mean sea level pressure) from dynamically downscaled climate simulations over Queensland, Australia. Results show that all bias‐correction methods are effective at removing systematic model biases, however the results are variable and season‐dependent. Importantly, our results are based on fully independent cross‐validation, an advantage over similar studies. Linear scaling preserves the climate change signals for temperature, while quantile mapping and the distribution‐based transfer function modify the climate change signal and patterns of change. The Perkins score for all the values above the 95th percentile and below the 5th percentile was used to evaluate how well the climate model matches the observational data. Bias correction improved Perkins score for extremes for some variables and seasons. We rank the bias‐correction methods based on the Kling–Gupta efficiency (KGE) score calculated during the validation period. We find that linear scaling and empirical quantile mapping are the best approaches for Queensland for mean climatology. On average, bias correction led to an improvement in the KGE score of 23% annually. However, in terms of extreme values, quantile mapping and statistical distribution‐based transfer function approaches perform best, and linear scaling tends to perform worst. Our results show that, except linear scaling, all approaches impact the climate change signal. [ABSTRACT FROM AUTHOR]

The diurnal cycle is often poorly reproduced in global climate model (GCM) simulations, particularly in terms of rainfall frequency and amplitude. While improvements in the regional climate model (RCM) with bias‐corrected boundaries have been reported in previous studies, they assumed that diurnal patterns are simulated correctly by the GCM, potentially leading to inaccuracies in the maximum rainfall timing and magnitude within the RCM domain. Here we provide the first examination of improvements to the diurnal cycle, within a RCM domain, achieved through the use of sophisticated bias‐corrected lateral and lower boundary conditions. Results show that the RCMs with bias‐corrected boundaries generally present improvement in capturing both rainfall timing and magnitude, particularly in northern Australia, where a strong diurnal pattern in rainfall is prevalent. We show that correcting systematic sub‐daily multivariate bias in RCM boundaries improves the diurnal rainfall cycle, which is particularly important in regions where short‐term intense precipitation occurs. Plain Language Summary: Global climate models have limitations in simulating precipitation characteristics at sub‐daily time scales, leading to significant bias in capturing rainfall timing and magnitude in regional climate model (RCM) simulations that use global climate model data as input. Previous studies have applied various bias correction approaches to the boundary conditions of RCMs, but they often assume that GCM sub‐daily rainfall patterns are simulated correctly, leading to a significant bias in maximum rainfall timing and magnitude within the domain. This study investigates the consequences of multivariate sub‐daily bias correction on the boundary conditions in order to evaluate the model performance for short‐term precipitation events. The results show that RCMs with bias‐corrected boundary conditions exhibit improvement across Australia, especially in northern Australia, which regularly experiences intense sub‐daily rainfall. Key Points: Regional climate model (RCM) with uncorrected boundaries poorly represented 3‐hourly precipitation with only 20%∼30% agreements compared to observationsSub‐daily bias correction of RCM lateral boundaries improves the sub‐daily representation of fields entering the RCM domainSub‐daily multivariate bias correction on the boundaries resulted in additional improvements, especially in northern Australia [ABSTRACT FROM AUTHOR]

High‐resolution climate change projections are increasingly necessary to inform climate policy and adaptation planning. Downscaling of global climate models (GCMs) is required to simulate the climate at the spatial scale relevant for local impacts. Here, we dynamically downscaled 15 CMIP6 GCMs to a 10 km resolution over Australia using the Conformal Cubic Atmospheric model (CCAM), creating the largest ensemble of high‐resolution downscaled CMIP6 projections for Australia. We compared the host CMIP6 models and downscaled simulations to the Australian Gridded Climate Data (AGCD) observational data and evaluated performance using the Kling‐Gupta efficiency and Perkins skill score. Downscaling improved performance over host GCMs for seasonal temperature and precipitation (10% and 43% respectively), and for annual cycles of temperature and precipitation (6% and 13% respectively). Downscaling also improved the fraction of dry days, reducing the bias for too many low‐rain days. The largest improvements were found in climate extremes, with enhancements to extreme minimum temperatures in all seasons varying from 142% to 201%, and to extreme precipitation of 52% in Austral winter and 47% in summer. The ensemble average integrated skill score improved by 16%. Temperature and precipitation biases were reduced in mountainous and coastal areas. CCAM downscaling outperformed host CMIP6 GCMs at multiple spatial scales and regions—continental Australia, Australian IPCC regions and Queensland's regions—with integrated added value ranging from 9% to 150% and higher over densely populated regions more exposed to climate impacts. This data set will be a valuable resource for understanding future climate changes in Australia. Plain Language Summary: High‐resolution climate models are used for producing climate change projections for assessing regional and local climate change impacts and for adaptation and policy formulation. We completed 15 high‐resolution climate simulations using the Conformal Cubic Atmospheric Model at a 10 km spatial resolution over the Australian continent and surrounds based on global climate models (GCMs) used in the Intergovernmental Panel on Climate Change Assessment Report 6. We evaluated the new high‐resolution data set by comparing it to observations and to their host global model across several regions within Australia. The high‐resolution simulations improved the representation of topography, seasonal temperature and annual cycles of temperature, precipitation, as well as the number of dry days, extreme precipitation and extreme minimum temperatures. The high‐resolution projections show improvement compared to GCMs consistently across spatial scales and regions, being particularly high (150%) over urban areas with high exposure to impacts. This new 10 km data set is the highest resolution, and largest ensemble of the latest climate projections for the Australian continent and surrounds and will be a valuable tool for evaluating future climate change impacts. Key Points: We dynamically downscaled 15 CMIP6 global climate model simulations over Australia to a 10 km spatial resolution using the Conformal Cubic Atmospheric modelTwo new assessment metrics are proposed to assess model performance and added value of downscalingThe integrated added value of downscaling can be as high as 150% over highly populated areas [ABSTRACT FROM AUTHOR]

Current methods for climate change assessment ignore the significant differences in uncertainty in model projections of the two key constituents of drought, precipitation, and evapotranspiration. We present here a new basis for assessing future drought using climate model simulations that addresses this limitation. The new method estimates the Standardized Precipitation Evapotranspiration Index (SPEI) in a two‐stage process. The first stage of our proposed approach is to derive the Standardized Precipitation Index (SPI) using reliable atmospheric variables, which are filtered with a wavelet‐based spectral transformation. This derived SPI is then converted to an equivalent SPEI by combining it with climate model evapotranspiration simulations. We assess the performance of our proposed approach across Australia. The consistency of general circulation model (GCM) drought projections, in terms of both frequency and severity, is improved using the derived SPI. Incorporating evapotranspiration further improves the consistency of the multiple GCMs and drought time scales. The proposed framework can also be generalized to other water resources applications, where the differences in GCM uncertainty for precipitation and evapotranspiration affect climate change impact assessments. Plain Language Summary: Drought is affected by both rainfall and evapotranspiration. Drought indices represent drought severity compared to normal conditions as a function of time. Some drought indices are based on rainfall alone and some use both rainfall and evapotranspiration in the calculations. To understand future drought risk, simulations from climate models are needed. Unfortunately, different climate models often disagree on amounts and patterns of rainfall in the future, the disagreement being considerably more on rainfall than for evapotranspiration. In this study, we attempt to reduce the impact of these differences by developing a new method to estimate future drought. We used a mathematical method known as wavelets to estimate drought indices based on rainfall. Evapotranspiration is then used directly from the climate model and combined with the rainfall based drought index to create one overall drought index. We used projections from multiple climate models to understand if our new method led to a greater agreement in how often and severe future droughts may be. Our results confirm that the new method offers greater consistency in drought projections for the future. Key Points: Current methods for projecting drought ignore differences in uncertainty between P and ET simulationsA new basis for projecting drought is proposed that explicitly accounts for relative uncertainty between P and ETOur results show that the new method offers greater consistency in drought projections for the future [ABSTRACT FROM AUTHOR]

Aims: Climate change is expected to have profound effects on species' distributions into the future. Freshwater fishes, an important component of freshwater ecosystems, are no exception. Here, we project shifts in suitable conditions for Australian freshwater fishes under different climate change scenarios to identify species that may experience significant declines in habitat suitability. Location: Australia. Methods: We use MAXENT bioclimatic models to estimate the effect of climate change on the suitable conditions for 154 species of Australian freshwater fishes, of which 109 are endemic and 29 are threatened with extinction. Suitable conditions for freshwater fish species are modelled using three different Earth System climate models (ESMs) under two different emission scenarios to the year 2100. For each species, we examine potential geographic shifts in the distribution of suitable conditions from the present day to 2100 and quantify how habitat suitability may change at currently occupied sites by the end of this century. Results: Broadscale poleward shifts in suitable conditions are projected for Australian freshwater fishes by an average of up to 0.38° (~180 km) across all species, depending on the emission scenario. Considerable loss of suitable conditions is forecast to occur within currently recognized distributional extents by 2100, with a mean projected loss of up to 17.5% across species. Predicted geographic range shifts and declines are larger under a high‐emission scenario. Threatened species are projected to be more adversely affected than nonthreatened species. Main Conclusions: Our models identify species and geographic regions that may be vulnerable to climate change, enabling freshwater fish conservation into the future. [ABSTRACT FROM AUTHOR]

Global climate models (GCMs) are essential for investigating climate change, but their coarse scale limits their efficacy for climate adaptation planning at the regional scales where climate impacts manifest. Dynamical downscaling of GCM outputs better resolves regional climate and thus provides improved guidance for climate policy at regional scales. Being expensive to run, downscaling uses a subset of GCMs, necessitating careful GCM selection. This evaluation identifies a suitable subset of CMIP6 GCMs for downscaling over Australia by assessing individual GCMs against three criteria: (a) performance simulating daily climate variable distributions, climate means, extremes, and modes; (b) model independence; and (c) climate change signal diversity. Over Australia, GCMs are generally biased cold (warm) for maximum (minimum) temperature, with larger biases for minimum temperature. GCMs are generally wet biased, especially over the monsoonal north, but dry biased over eastern regions. Most GCMs show larger biases for temperature and precipitation over geographically complex, heavily populated eastern regions, relative to other regions. Evaluations identify a distinct group of 11 GCMs that perform consistently poorly across climate variables, statistics, and timescales with widespread, statistically significant biases, versus 13 GCMs that show consistent adequate‐to‐good performance with substantially reduced errors. Assessment of model independence highlights the lack of independence between several high‐performing GCMs, particularly from allied modeling groups, demonstrating the importance of careful ensemble selection when making selective samples of climate space. Once GCM climate signal diversity is considered, 6–8 mid‐to‐high‐performing, independent GCMs occupy the full range of the future climate space and, thus, are suitable for dynamical downscaling over CORDEX‐Australasia. Key Points: Per‐global climate model (GCM) performances varied markedly, though the best‐performing GCMs simulated consistently well across temperature variables and statisticsAssessment of model independence highlights the lack of independence between several high‐performing GCMsSix to eight mid‐to‐high‐performing, independent GCMs capturing a broad range of the future climate space are identified as suitable for downscaling [ABSTRACT FROM AUTHOR]

Aim: Many species are adapted to a particular fire regime and major deviations from that regime may lead to localized extinction. Here, we quantify immaturity risks to an obligate‐seeder forest tree using an objectively designed climate model ensemble and a probabilistic fire regime simulator to predict future fire regimes. Location: Alpine ash (Eucalyptus delegatensis) distribution, Victoria, south‐eastern Australia. Methods: We used a fire regime model (FROST) with six climate projections from a climate model ensemble across 3.7 million hectares of native forest and non‐native vegetation to examine immaturity risks to obligate‐seeder forests dominated by alpine ash (Eucalyptus delegatensis), which has a primary juvenile period of approximately 20 years. Our models incorporated current and future projected climate including fuel feedbacks to simulate fire regimes over 100 years. We then used Random Forest modelling to evaluate which spatial characteristics of the landscape were associated with high immaturity risks to alpine ash forest patches. Results: Significant shifts to the fire regime were predicted under all six future climate projections. Increases in both wildfire extent (total area burnt, area burnt at high intensity) and frequency were predicted with an average increase of up to 110 hectares burnt annually by short‐interval fires (i.e., within the expected minimum time to reproductive maturity). The immaturity risk posed by short‐interval fires to alpine ash forest patches was well explained by Random Forest models and varied with both location and environmental variables. Main conclusions: Alpine ash forests are predicted to be burned at greater intensities and shorter intervals under future fire regimes. About 67% of the current alpine ash distribution was predicted to be at some level of immaturity risk over the 100‐year modelling period, with the greatest risks to those patches located on the periphery of the current distribution, closer to roads or surrounded by a drier landscape at lower elevations. [ABSTRACT FROM AUTHOR]

Climate change is projected to impact multiple components of the flow regime. However, changes in some ecologically important aspects of flow seasonality and variability are not well‐represented by global climate models. We used a stress testing method and global sensitivity analysis to investigate whether interactions between five different, but plausible, change "dimensions" (hydroclimatic variables or relationships) led to worse ecological outcomes than individual changes. The five dimensions include changes in long‐term average rainfall and temperature, low‐frequency variability of rainfall, seasonality of rainfall, and the rainfall‐runoff relationship. Our case study involved regulated and unregulated sections of the Goulburn River, Australia. We found that four different modeled ecological outcomes (condition of small bodied fish, large bodied fish, in‐channel vegetation, and floodplain vegetation) are most sensitive to changes in long‐term average rainfall. Sensitivity to changes in rainfall seasonality depends on river characteristics and appears to be heavily dampened by regulation and actively managed environmental water. Changes to the rainfall‐runoff relationship (which may be triggered by long‐term drying) were found to greatly influence ecological outcomes, but remain poorly understood. However, when considering the worst outcomes that are likely to present severe threats to ecological survival, all five dimensions were significant. These worst outcomes only manifest under certain combinations of changes with interactive effects. These joint interactions have implications for climate risk assessments that do not consider multiple dimensions of change, particularly those aimed at evaluating and mitigating severe threats or extinction probability. Plain Language Summary: Different kinds of climate changes, such as lower rainfall overall, increased temperatures, or changes to the time of year when the most rain falls can all threaten aquatic plants and animals. By manually changing the inputs to our water resource models, we can answer questions like "what happens if rainfall decreases by 20% and temperatures go up by two degrees?" We can do this many times, and build a picture of how rivers respond to a range of changes. We used this concept to understand how river ecology responds to up to five different changes at once and asked whether the outcomes are worse when these changes are combined versus when they occur separately. Ecological outcomes were most sensitive to changes in overall rainfall. The second biggest impact was changes in how much rainfall makes it into the river, which sometimes happens during long droughts. The other changes were less significant overall. Importantly, the most severe threats which could even lead to extinction only come about under combinations of the five changes. This means that in planning to avoid the worst outcomes under climate change, we might need to look at a wider range of combined changes. Key Points: We assessed sensitivity of four modeled freshwater ecosystem outcomes to five different hydroclimatic changes using a stress testVariation in ecological outcomes were most sensitive to changes in long‐term annual rainfall and rainfall‐runoff relationshipsHowever, in differentiating the worst ecological outcomes, a larger number of hydroclimatic changes were significant [ABSTRACT FROM AUTHOR]

During March 2021, large regions of Eastern Australia experienced prolonged heavy rainfall and extensive flooding. The maximum daily mean column integrated water vapor transport (IVT) over Sydney during this event was within the top 0.3% of all days since 1980, and the 10‐day mean IVT was in the top 0.2%. In this study, we have examined the change in frequency of extreme IVT events over Sydney in 16 climate models from the Coupled Model Intercomparison Project 6 under two Shared Socioeconomic Pathways (SSP245 and SSP585). Generalized Extreme Value modeling was used to further analyze the change in frequency of extreme IVT events. We found the probability of long duration high IVT events is projected to increase by 80% at the end of the century, but the future change in IVT is correlated to the rate of global and regional warming in each model. Plain Language Summary: During March 2021, large regions of Eastern Australia experienced prolonged heavy rainfall and extensive flooding. This was associated with strong horizontal water vapor transport over this region that persisted for approximately 10 days. The amount of water vapor transported over Sydney during this event was extreme and within the top 0.3% of all days since 1980. In this study, we used climate models to project how much more often events such as these may occur by the end of the twenty‐first century under two greenhouse gas emission scenarios. We found that the probability of long duration high water vapor transport over Sydney, as in March 2021, may increase by 80%. Key Points: Sydney's March 2021 floods were associated with persistent high water vapor transportThe probability of long‐duration high integrated water vapor transport events should increase by the end of the twenty‐first centuryDifferences in climate sensitivity within the CMIP6 ensemble may increase the spread of moisture flux projections [ABSTRACT FROM AUTHOR]