Search

Stromboli is a volcanic island in a persistent state of activity, located off the northern coast of Sicily. The paroxysms have been the most powerful explosive phenomena at Stromboli in the last 150 years. These explosions can produce ballistic projectiles that can heavily affect trails and observation sites as well as hit inhabited areas at lower elevations, down to the coast. On July 3, 2019, a paroxysm significantly affected a great portion of the island with ballistic projectiles. In particular, many decimeter and meter-sized spatter bombs hit the W flank of Stromboli, and ignited multiple fires. In May 2022, we conducted an Unmanned Aerial System photogrammetric campaign over a sector of the W flank of Stromboli that was heavily affected by the paroxysm. The largest clasts were still preserved after 3 years, not disturbed by significant mass wasting phenomena or human interference, and they were not yet hidden by the post-fire regrowth of the brush vegetation. In this study, we constrained the main sources of uncertainty affecting the bombs distribution on the ground, by characterizing a percentage of uncertain clasts, testing various density estimators, and by modeling an areal buffer around the mapped clasts. We produced a 0.18 km2 wide 1.6-cm resolution orthomosaic, a 10-cm resolution Digital Surface Model, and 2813 outlines of the mapped ballistics. Spatial distribution of the ground cover and associated uncertainty were analyzed as a function of the distance and of the angular direction from the source. [ABSTRACT FROM AUTHOR]

A coupled framework of ballistic simulations and an optimized machine learning (ML) model was developed to accurately predict the kinetic energy reduction of a projectile impacting a target. ML models can require a significant number of data points for proper training, testing, and validation. High-performance computing (HPC) resources can be used to simulate the ballistic impacts of various projectiles against several different target materials using appropriate physics-based hydrocodes. Computational modeling can explore areas where experiments would naturally be cost-prohibitive. These hydrocodes can evaluate large parametric spaces varying the projectile and target variables that are required to train an ML model. In this study a large, generated set of data points was used to develop an optimized artificial neural network (ANN) algorithm to create a fast-running model without prior knowledge of the mathematical relationships between all the input and output variables. The optimized ANN model was developed using Optuna in an HPC environment to tune the hyperparameters needed for the ANN model. This fast-running ML model could then be leveraged to investigate designing optimized targets that could protect against different types of projectiles. The results of this work showed that the optimized ANN model predicted the kinetic energy reduction with a mean absolute percentage error of 2.7% across the validation data. Overall, the optimized ANN model showed excellent agreement across the range of data considered by the computational models. [ABSTRACT FROM AUTHOR]

Computed tomography (CT) may have a crucial role in the forensic documentation and analysis of firearm injuries. The aim of this forensic ballistics case study was to explore whether two types of expanding bullets and a full metal-jacketed bullet could be differentiated by inspecting bullet fragments and fragmentation pattern in CT. Three types of.30 caliber bullets (full metal-jacketed Norma Jaktmatch, expanding full-copper Norma Ecostrike, and expanding soft-point Norma Oryx) were test fired from a distance of 5 m to blocks of 10% ballistic gelatine. CT scans of the blocks were obtained with clinical equipment and metal artifact reduction. Radiopaque fragments were identified and fragmentation parameters were obtained from the scans (total number of fragments, maximum diameter of the largest fragment, distance between entrance and the closest fragment, length of the fragment cloud, and maximum diameters of the fragment cloud). The fragmentation patterns were additionally visualized by means of 3D reconstruction. In CT, the bullet types differed in several fragmentation parameters. While the expanding full-copper bullet Ecostrike left behind only a single fragment near the end of the bullet channel, the soft-point Oryx had hundreds of fragments deposited throughout the channel. For both expanding bullets Ecostrike and Oryx, the fragments were clearly smaller than those left behind by the full metal-jacketed Jaktmatch. This was surprising as the full metal-jacketed bullet was expected to remain intact. The fragment cloud of Jaktmatch had similar mediolateral and superoinferior diameters to that of Oryx; however, fragments were deposited in the second half of the gelatine block, and not throughout the block. This case study provides a basis and potential methodology for further experiments. The findings are expected to benefit forensic practitioners with limited background information on gunshot injury cases, for example, those that involve several potential firearms or atypical gunshot wounds. The findings may prove beneficial for both human and wildlife forensics. [ABSTRACT FROM AUTHOR]

A detailed mapping of volcanic ballistic projectiles emplaced in a defined area, represents the starting point to derive preparatory data in hazard and risk studies of ballistics phenomena. Considering as case study the 3rd July 2019 paroxysmal eruption occurred at Stromboli volcano, we map and analyse at very high spatial resolution (8 cm) the distribution of the ballistic spatter clasts emplaced on the E flank of the volcano. The resulting map identifies and reproduces as geospatial polygon elements 152,228 spatter clasts with areal dimensions from 0.03 to 4.23 m2. Dispersed on 0.407 km2, the spatters cover an area of 29,000 m2 corresponding to an erupted products volume from 2.3 to 7.0 × 103 m3, calculated here for the first time. Spatial analyses indicate that the area mostly affected by the clasts emplacement is between N67.5 and N135 directions, identifying a preferential deposition between N112.50 and N123.75 directions. The clasts size distribution rapidly decreases with the size increase, highlighting a nearly constant ratio small/large clasts regardless the distance from the vent. Finally, additional investigations reveal that clasts dispersion parameters decrease progressively with the distance from the vent only along one direction (N67.5), highlighting how the morphology influences the deposition and remobilisation of mapped ballistics. [ABSTRACT FROM AUTHOR]

A mathematical simulation of the internal ballistics of a shot from a gun, depending on the design of the charge of the gun, has been performed. A general system of equations defining the unsteady movement of a two-phase gas–powder mixture in the channel of the barrel of a gun in the one-dimensional approximation is presented. Results of simulation of a shot from a gun charged with tubular powder or chopped powder are presented. The influence of the gradual ignition of a powder in a gun and of its nonstationary and erosion burning in it on the parameters of the ballistic process in the gun and the influence of the mass and disposition of an igniter in the gun on the dynamics of a shot from it were investigated. [ABSTRACT FROM AUTHOR]

In the era of unmanned war, with the increasing muzzle velocity requirement, the design of gun is significantly restricted by recoil, especially for guns installed on unmanned aerial vehicles. A recoilless gun with combustible cartridge was designed to eliminate recoil and increase projectile velocity, and the influence of main parameters on recoil was studied. First, a design of a recoilless gun with high projectile velocity is proposed based on combustible cartridge case. Next, a classical interior ballistic model is developed during the recoilless gun firing cycle, and the effect of main parameters of interior ballistics on the performance is investigated. Additionally, simple nonlinear fitting formulae are defined to highlight the variation of recoil momentum with the time of interior ballistic model. Finally, numerical simulation results are compared with the test results to validate the feasibility of the design. The experimental results demonstrate that the classical interior ballistic model can be used to accurately analyze the effect of the parameters on the projectile velocity and the recoil reduction efficiency. The projectile velocity of the recoilless gun could raised to 1200 m/s and the recoil momentum could be eliminated almostly. Therefore, the newly designed recoilless gun effectively eliminates the recoil momentum and significantly improves the projectile velocity. The findings should make an important contribution to the field of engineering applications of recoilless gun. [ABSTRACT FROM AUTHOR]

A detailed mapping of volcanic ballistic projectiles emplaced in a defined area, represents the starting point to derive preparatory data in hazard and risk studies of ballistics phenomena. Considering as case study the 3rd July 2019 paroxysmal eruption occurred at Stromboli volcano, we map and analyse at very high spatial resolution (8 cm) the distribution of the ballistic spatter clasts emplaced on the E flank of the volcano. The resulting map identifies and reproduces as geospatial polygon elements 152,228 spatter clasts with areal dimensions from 0.03 to 4.23 m2. Dispersed on 0.407 km2, the spatters cover an area of 29,000 m2 corresponding to an erupted products volume from 2.3 to 7.0 × 103 m3, calculated here for the first time. Spatial analyses indicate that the area mostly affected by the clasts emplacement is between N67.5 and N135 directions, identifying a preferential deposition between N112.50 and N123.75 directions. The clasts size distribution rapidly decreases with the size increase, highlighting a nearly constant ratio small/large clasts regardless the distance from the vent. Finally, additional investigations reveal that clasts dispersion parameters decrease progressively with the distance from the vent only along one direction (N67.5), highlighting how the morphology influences the deposition and remobilisation of mapped ballistics. [ABSTRACT FROM AUTHOR]

To date, various designs have been proposed to increase the efficiency of radiative coolers with approaches such as changes in materials and their properties, size and shape of the elements, and structures geometry. In the present work, an attempt has been made to obtain this important issue by presenting an innovative strategy from a new perspective. In this strategy, by keeping the face exposed to solar energy away from the body, heat distribution can be inhibited, which leads to a decrease in body temperature. This act simultaneously provides a higher operating temperature for the emitter section, thereby enhancing the exergy of the system. On the other hand, the presence of the thermal diode allows the surface of the object to continue to radiate its heat. Hence, several experiments were designed and performed to evaluate the performance of the strategy by an experimental apparatus built for this purpose. Initially, the rectification ratio results of constructed rectifier mirrors showed that the light transmission amount in the forward path is nearly 44% higher than in the reverse direction. In the next step, the temperature measurement of the samples showed the sub-ambient temperature for the present work with a difference of 9 and 2 °C, against direct sunlight and the night sky, respectively. This model also has a high-temperature difference of about 13, 11, and 6.5 °C during the day and 1.6, 0.5, and 0.5 °C at night below the other three samples. This superiority was maintained in cloudy weather conditions as well as thermal shock stability. One of the most important applications of radiation coolers is in the aerospace industry. In this particular application, in addition to cooling, it is vital to protect the equipment against thermal shock caused by sudden and extreme temperature differences in space. Due to obtaining results such as efficient cooling rate, and high resistance to thermal shock, this concept provides a practical vision for improving the spacecraft's cooling systems. [ABSTRACT FROM AUTHOR]

A promising direction in barrel ballistics aimed at increasing the muzzle velocity of a projectile is the use of new propellants as an attached charge. This paper presents an experimental and theoretical method for determining the law of propellant combustion in a manometric experiment (in a closed volume). Within the framework of this method, a small number of experiments could be sufficient to determine a change in the law of combustion during the propellant burnout and depending on pressure. This method is demonstrated on the example of processing three experiments with model high-density propellant. The laws of combustion of high-density propellants, obtained in this study, can later be used to calculate the gas-dynamic parameters of a shot from a barrel system or a nozzle bomb (in a semi-closed volume) using these propellants. [ABSTRACT FROM AUTHOR]

In the frame of an experimental setting, the formation of round-shaped compounded glass fragments on the exit site after gunshots through a windshield was examined. For that purpose, a 9 × 19 mm pistol (HK P30) and two different cartridges containing (a) a full metal jacketed round-nosed projectile and (b) a deformation projectile were used. On the basis of 52 gunshots, the morphology, impact angles and terminal ballistics of occurring compounded glass fragments were examined. The results showed that the compounded glass fragments' morphology allowed for the differentiation of two used projectiles. Fragments were able to cause round-shaped defects in a single cotton layer (T-shirt) with subsequent penetration of up to 2.4 cm into ballistic gelatin (10%, 4 °C). As a function of the projectile type, the compounded glass fragments showed different reproducible impact angles that differed notably from the known conical pattern of expelled glass fragments after bullet penetration. These findings might help to explain the atypical morphology of gunshot wounds with laminated glass as an intermediate target and prevent possible misinterpretations when reconstructing the sequence of events. [ABSTRACT FROM AUTHOR]

This paper describes the method and results of an experimental study of unsteady burning rate of high-energy materials containing metal powder additives under depressurization at a rate of 140–160 MPa/s. The method based on stating and solving the inverse problem of internal ballistics is used to determine the unsteady burning rate. The studies are carried out for high-energy materials, including energy additives in the form of metal powders (ASD-4, ASD-6, and Alex aluminum powders), aluminum diboride, and dodecaboride. It is shown by analyzing the this study that the unsteady burning rate of high-energy materials under sharp depressurization is oscillatory and depends on the energy additive type. [ABSTRACT FROM AUTHOR]

The high recoil force of a high-power gun produces a strong impact on the carrier, which severely limits the application of the high-power gun mounted on vehicles. A gas-controlled side-jet gun was designed to reduce the recoil force, and the gas-solid transient flow in the bifurcated tube of the gun was studied. First, a one-dimensional two-phase interior ballistics model was established considering the gas-solid coupling between the propellant gas and the valve in the front gas tube. Then, the propagation of the rarefaction wave in the barrel was studied, and the flow field distribution in the bifurcated tube was obtained. Finally, the mechanism of recoil reduction was analyzed. Results show that the bifurcated two-phase flow model can be used to accurately analyze the effect of the gas-controlled side-jet gun's parameters on the projectile velocity and the recoil reduction efficiency. The projectile velocities of the gas-controlled side-jet gun and the traditional gun are 955.7 m/s and 960 m/s, respectively. The projectile velocity loss of the gas-controlled side-jet gun is less than 0.5 %. The recoil momentum of the traditional gun and the gas-controlled side-jet gun are 538.62 N·s and 336.68 N·s, respectively. The recoil momentum of the gas-controlled side-jet gun decreases by 37.49 %. Additionally, the single firing time of the gas-controlled side-jet gun (18.91 ms) is less than that of the traditional single-barrel gun (more than 60 ms). Therefore, the newly designed gas-controlled side-jet gun significantly reduces the recoil momentum without losing the projectile velocity and continuous firing mode. [ABSTRACT FROM AUTHOR]

Pepper spray launchers are more precise and wind stable compared to conventional pepper sprays and are commonly used as a self-defensive tool. With the advanced potential, they may also harbour a greater risk for injuries, especially if they are not used within the suggested safety distance. If the shooting distance is below 1.5 m, energy densities may exceed the threshold energy density for the penetration of skin leading to skin laceration. We present a case where a man is hit by the liquid jet of a JPX Jet Protector® with an estimated shooting distance of 0.3 m. The man suffered from a bleeding skin laceration, which had to be sewed in the hospital. This case report furthermore outlines the potentially dangerous effect of pepper spray launchers and thereby their role in forensic investigations. [ABSTRACT FROM AUTHOR]

Gunshot residues (GSRs) play an important role in forensic investigations of gun-related violence. The presence of GSRs has been described to help to identify the bullet entry area, as it was supposed not to be found at exit wounds. This report details the suicidal headshot of an 84-year-old male where unburned tube-like, cuboid and flake-formed powder particles have been found not only at the inside of the muzzle but also circular around the exit wound. With very short-barrelled weapons, it must be expected that part of the propellant charge leaves the barrel unburned behind the bullet. In contrast to that, the barrel length of the used weapon should lead to a complete burn-up of powder particles. The surprisingly large number of unburned powder particles present at the exit wound of the injury gave reason for further investigation to understand the underlying ballistic aspects and outlines the importance of having a close look at incidence scene photos during an investigation. [ABSTRACT FROM AUTHOR]

In the paper we apply asymptotic technique based on the method of stationary phase and obtain the approximate analytical description of thermal motions caused by a source on an isotopic defect of an arbitrary mass in a 1D harmonic crystal. It is well known that localized oscillation is possible in this system in the case of a light defect. We consider the unsteady heat propagation and obtain formulae, which provide continualization (everywhere excepting a neighbourhood of a defect) and asymptotic uncoupling of the thermal motion into the sum of the slow and fast components. The slow motion is related to ballistic heat transport, whereas the fast motion is energy oscillation related to transformation of the kinetic energy into the potential one and in the opposite direction. To obtain the propagating component of the fast and slow motions we estimate the exact solution in the integral form at a moving point of observation. We demonstrate that the propagating parts of the slow and the fast motions are "anti-localized" near the defect. The physical meaning of the anti-localization is a tendency for the unsteady propagating wave-field to avoid a neighbourhood of a defect. The effect of anti-localization increases with the absolute value of the difference between the alternated mass and the mass of a regular particle, and, therefore, more energy concentrates just behind the leading wave-front of the propagating component. The obtained solution is valid in a wide range of a spatial co-ordinate (i.e. a particle number), everywhere excepting a neighbourhood of the leading wave-front. [ABSTRACT FROM AUTHOR]

Secondary blast injuries may result from high-velocity projectile fragments which ultimately increase medical costs, reduce active work time, and decrease quality of life. The role of skin penetration requires more investigation in energy absorption and surface mechanics for implementation in computational ballistic models. High-speed ballistic penetration studies have not considered penetrating and non-penetrating biomechanical properties of the skin, including radial wave displacement, resultant surface wave speed, or projectile material influence. A helium-pressurized launcher was used to accelerate 3/8″ (9.525 mm) diameter spherical projectiles toward seventeen whole porcine legs from seven pigs (39.53 ± 7.28 kg) at projectile velocities below and above V50. Projectiles included a mix of materials: stainless steel (n = 26), Si3N4 (n = 24), and acetal plastic (n = 24). Tracker video analysis software was used to determine projectile velocity at impact from the perpendicular view and motion of the tissue displacement wave from the in-line view. Average radial wave displacement and surface wave speed were calculated for each projectile material and categorized by penetrating or non-penetrating impacts. Two-sample t-tests determined that non-penetrating projectiles resulted in significantly faster surface wave speeds in porcine skin for stainless steel (p = 0.002), plastic (p = 0.004), and Si3N4 ball bearings (p = 0.014), while ANOVA determined significant differences in radial wave displacement and surface wave speed between projectile materials. Surface wave speed was used to quantify mechanical properties of the skin including elastic modulus, shear modulus, and bulk modulus during ballistic impact, which may be implemented to simulate accurate deformation behavior in computational impact models. [ABSTRACT FROM AUTHOR]

Weapons and past weapon systems are important research topics in Paleolithic archaeology. Its popularity stems from its relevance for understanding broader technological evolution, subsistence strategies, and human behavior. However, identifying what weapon system was used has proven to be a significant methodological challenge over the last few decades and in spite of what some titles of recent publications suggest, the question is still not resolved. In this paper, we present the results of a ballistic analysis of the four modes of propulsion that are traditionally considered for the Paleolithic period (bow, spear-thrower, hand-cast and thrusting spear). We advocate a stepwise approach to the problem given the multiple variables involved. The goal of this study is to add an essential building block to current understanding by exploring the notion of reactional impact stress (RIS) on the basis of the angle of incidence developed by the different projectiles. Our results show the importance of RIS for accurately understanding the projectile impact phenomenon and the existence of a reproducible and mutually distinct RIS between the four tested weapon systems. These results shed a new light on approaches that have been used previously to examine weapon systems archaeologically, such as those relying on the length of "diagnostic impact fractures". Our results allow the proposition of an alternative approach that appears to hold great potential, in particular for identifying the use of the bow. While a reliable method for recognizing past propulsion modes is not yet established, we conclude that the solution lies within the integration of several fields, more in particular use-wear analysis, fracture mechanics in brittle solids, and ballistics and we progressively move forward in identifying the key building blocks of such a method. [ABSTRACT FROM AUTHOR]

Ballistic devices that generate radial pressure waves are used for the treatment of different therapeutic indications. In order to assess the effectiveness of these devices and to interpret and transfer the results of clinical trials, it is important to know their acoustic output. In this paper, two ballistic devices and their reproducibility at different clinically relevant settings were investigated in the same in-vitro test setup. Pressure curves were measured in water at different intensity levels and pulse repetition rates. The sound field parameters (peak pressures, positive pulse intensity integral) were calculated from the pressure curves. Additionally, the surface velocity of the applicator was determined in air using a vibrometer. Both devices show a good pulse-to-pulse reproducibility. While the peak maximum pressure and the positive pulse intensity integral decrease only slightly (pmax up to 12%, PII+ up to 18.8%) comparing 1 Hz and 25 Hz for one device, they drop sharply (pmax up to 68.4%, PII+ up to 90.2%) for the other device comparing 1 Hz to 21 Hz. The same effect was observed in the vibrometer measurements. The results show that with increasing pulse repetition rate the stability of the parameters varies between different devices. Hence, all sound field parameters should be compared before transferring settings from one device to another. [ABSTRACT FROM AUTHOR]

Launching large (> 1 g) well-characterized projectiles to velocities beyond 10 km s - 1 is of interest for a number of scientific fields, but is beyond the reach of current hypervelocity launcher technology. This paper reports the development of an explosively driven light-gas gun that has demonstrated the ability to launch 8-mm-diameter 0.36-g magnesium projectiles to 10.4 km s - 1 . The implosion-driven launcher (IDL) uses the linear implosion of a pressurized tube to shock-compress helium gas to a pressure of 5 GPa, which then expands to propel a projectile to hypervelocity. The launch cycle of the IDL is explored with the use of down-bore velocimetry experiments and a quasi-one-dimensional internal ballistics solver. A detailed overview of the design of the 8-mm launcher is presented, with an emphasis on the unique considerations which arise from the explosively driven propellant compression and the resulting extreme pressures and temperatures. The high average driving pressure results in a launcher that is compact, with a total length typically less than a meter. The possibility to scale the design to larger projectile sizes (25 mm diameter) is demonstrated. Finally, concepts for a modified launch cycle which may allow the IDL to reach significantly greater projectile velocities are explored conceptually and with preliminary experiments. [ABSTRACT FROM AUTHOR]

In contrast to cranial gunshot trauma, diagnosis and interpretation of gunshot trauma to long bones remains difficult and controversial. The aim of this study is to review the published literature on fracture patterns resulting from gunshot trauma in human long bones, and to use the described characteristics to provide practical guidance for the forensic anthropologist. In order to achieve this, medical and forensic publications on this topic were reviewed. Several types of fractures, such as linear, oblique, comminuted and butterfly fractures, have been observed in either the shaft or the ends of long bones. Indirect fractures that are not caused by bullets striking bone directly but by bullet-induced forces to the surrounding soft tissue have been found as well. Some of these fractures are related to a specific context or mechanism which might help in the forensic reconstruction of events. It is recommended that future research should focus on available medical data to provide more detailed descriptions on fracture patterns for forensic purposes. Experimentation with bone surrogates and computer modelling might also provide better and more realistic reconstructions of gunshot trauma in the future and provide valuable insights for its diagnosis and interpretation in forensic anthropology. [ABSTRACT FROM AUTHOR]

The use of ordnance gelatine has been widespread in the field of ballistics as a simulant for soft tissue when assessing ballistic threats. However, the traditional method of preparing ordnance gelatine is time-consuming and requires precision to ensure that the final mold meets the required specifications. Furthermore, temperature control is necessary post-production, and there are limitations on its usage duration. To address these issues, manufacturers have developed pre-mixed, gelatine-like products that are stable at room temperature and require less preparation time. Nonetheless, it is uncertain whether these new products can perform in the same manner as the gold standard of ordnance gelatine. This study used five types of blocks, including ordnance gelatine (10% and 20%), Clear Ballistics (10% and 20%) and Perma-Gel (10%) and subjected them to 9 mm, 0.380 Auto fired from a universal receiver and a 5.56 × 45 mm ammunition fired by a certified firearms instructor. Delta-V and total energy dissipation were measured after each test using data collected from ballistic chronographs placed in front of and behind each block. High-speed video was recorded, and a cut-down analysis conducted. The findings revealed variations in energy dissipation and fissure formation within the block, with greater energy based on fissure formation observed in the ordnance gelatine. Additionally, the high-speed video showed the occurrence of secondary combustions occurring in the premixed gelatines. [ABSTRACT FROM AUTHOR]

Firearm injuries are a preventable epidemic in the USA. Extremities are commonly affected in gunshot injuries. Such injuries may be complex with concomitant osseous, soft tissue, and neurovascular components. The maximum wounding potential of a projectile is determined by its kinetic energy and the proportion of the kinetic energy that is transmitted to the target. Accurate assessment of ballistic injuries is dependent on utilizing the principles of wound ballistics, accurate bullet count, and ballistic trajectory analysis. The goals of this article are to review wound ballistics and the imaging evaluation of extremity civilian firearm injuries in the adult population, with emphasis on ballistic trajectory analysis, specific ballistic fracture patterns, and diffuse, secondary soft tissue ballistic injuries. [ABSTRACT FROM AUTHOR]

Rifles are often involved in violent deaths such as homicide and suicide. Consequently, expert knowledge and experimental forensic investigations are important to clarify the nature of ballistic trauma when applied to the human head and neurocranium. This study investigated differences in entrance wound morphology with Synbone® spheres which are described as being comparable to human flat bones. A series of ballistic experiments were conducted using two different rifle calibers (5.56 × 45 mm and 7.62 × 39 mm Full Metal Jacket (FMJ)). Synbone® spheres were used for close-range 0.3 m simulated executions as well as at 25 m and 35 m to simulate urban and military engagements. Results were compared with previously published experimental studies using similar military ammunition. In our study, entry wound morphology closely resembles real forensic cases compared to exit wound and overall shape morphology independently of the distance and the caliber. Circumferential delamination was clearly visible with full metal jacket (FMJ) rounds, yielding similar damage pattern morphology to the human crania. This study documented the presence of hydraulic burst or shock in all ten rounds from all three distances. Krönlein shots were also observed in some cases. Synbone® spheres constitute an acceptable synthetic surrogate for ballistic experiments. The present study offers new initial data on the behavior of Synbone® proxies in ballistic testing of military ammunitions; FMJ gunshot injuries to the human head, for distances that have not previously been published, suggesting that efficient tests can take place under these conditions. Further research on experimental ballistics with a larger number of controlled factors and multiple repetitions is recommended to verify the results of this pilot study before applied in forensic simulations. [ABSTRACT FROM AUTHOR]

Forensic reconstructions and ballistic testing requires the use of consistent and repeatable simulants. Synthetic bone has been developed to be mechanically similar to human bone; however, it does not have the same viscoelastic properties. Bone acts as brittle and stiff material and fails instantly under high-energy events such as ballistic impacts. Consequently, bone simulants for use in ballistic testing should show comparable energy deposition to mammalian bones. This study aims to determine if Synbone® flat plates could be a viable proxy for Sus scrofa (domesticus) ribs in ballistic testing with 7.62 × 51 mm Full Metal Jacket ammunition. 5 mm, 6 mm and 12 mm quartered Synbone® plates were embedded into 10% ballistic gelatin and shot using 7.62 mm ammunition. The models were then analysed to compare the Synbone® to a previous Sus Scrofa (domesticus) rib study and focused on energy deposition, the number of fragments within the block, angle of deviation, onset of yaw, the temporary cavity, and the permanent wound channel. No significant difference was seen between the Sus Scrofa (domesticus) and the 5 mm Sybone®. There were significant differences observed between Sus Scrofa (domesticus) ribs and 6 mm Synbone® for the number of fragments, energy deposition and projectile tract diameter, and significant differences seen between Sus scrofa (domesticus) ribs and 12 mm Synbone® for the depth of onset of yaw, energy deposition and projectile tract diameter. This study indicates that the 5 mm Synbone® plate is a suitable proxy for Sus scrofa (domesticus) ribs for use with 7.62 × 51 mm FMJ ammunition in ballistic testing. [ABSTRACT FROM AUTHOR]

In shooting crimes, ballistics tests are often recommended in order to reproduce the wound characteristics of the involved persons. For this purpose, several "simulants" can be used. However, despite the efforts in the research of "surrogates" in the field of forensic ballistic, the development of synthetic models needs still to be improved through a validation process based on specific real caseworks. This study has been triggered by the findings observed during the autopsy performed on two victims killed in the same shooting incident, with similar wounding characteristics; namely two retained head shots with ricochet against the interior wall of the skull; both projectiles have been recovered during the autopsies after migration in the brain parenchyma. The thickness of the different tissues and structures along the bullets trajectories as well as the incident angles between the bullets paths and the skull walls have been measured and reproduced during the assemblage of the synthetic head models. Two different types of models ("open shape" and "spherical") have been assembled using leather, polyurethane and gelatine to simulate respectively skin, bone and soft tissues. Six shots have been performed in total. The results of the models have been compared to the findings of post-mortem computed tomography (PMCT) and the autopsy findings.Out of the six shots, two perforated the models and four were retained. When the projectile was retained, the use of both models allowed reproducing the wounds characteristics observed on both victims in terms of penetration and ricochet behaviour. However, the projectiles recovered from the models showed less deformation than the bullets collected during the autopsies. The "open shape" model allowed a better controlling on the shooting parameters than the "spherical" model. Finally, the difference in bullet deformation could be caused by the choice of the bone simulant, which might under-represent either the strength or the density of the human bone. In our opinion, it would be worth to develop a new, more representative material for ballistic which simulates the human bone. [ABSTRACT FROM AUTHOR]

Booming technological advances and turbulent military reforms have promoted the continuous advancement of weapons and equipment. High-power microwave (HPM) weapons have changed the damage modes of traditional guns, missiles and other kinetic energy weapons, as well as having the huge advantage of "changing the rules of the game." The study of exterior ballistics of high-power microwave weapons has theoretical support for the design and development of weapons and the verification of performance indicators and is also an important basis in the firing application of high-power microwave weapons. By studying the coupling mechanism between HPM weapons and targets, an exterior ballistics description of HPM weapons is given According to the description of exterior ballistics, the differences between HPM and traditional weapons in definitions, accuracies, space trajectories, space descriptions and "end points" are summarized, and the exterior ballistics space transmission is established. This study reveals the nine major transmission laws of the exterior ballistics of HPM weapons. The constructed model and related theories of the transmission laws for exterior ballistics lay a theoretical foundation for the in-depth study of key technologies of HPM weapons, such as fire control and damage assessment. [ABSTRACT FROM AUTHOR]

Molecular ballistics combines molecular biological, forensic ballistic, and wound ballistic insights and approaches in the description, collection, objective investigation, and contextualization of the complex patterns of biological evidence that are generated by gunshots at biological targets. Setting out in 2010 with two seminal publications proving the principle that DNA from backspatter collected from inside surfaces of firearms can be retreived and successfully be analyzed, molecular ballistics covered a lot of ground until today. In this review, 10 years later, we begin with a comprehensive description and brief history of the field and lay out its intersections with other forensic disciplines like wound ballistics, forensic molecular biology, blood pattern analysis, and crime scene investigation. In an application guide section, we aim to raise consciousness to backspatter traces and the inside surfaces of firearms as sources of forensic evidence. Covering crime scene practical as well as forensic genetic aspects, we introduce operational requirements and lay out possible procedures, including forensic RNA analysis, when searching for, collecting, analyzing, and contextualizing such trace material. We discuss the intricacies and rationales of ballistic model building, employing different tissue, skin, and bone simulants and the advantages of the "triple-contrast" method in molecular ballistics and give advice on how to stage experimental shootings in molecular ballistic research. Finally, we take a look at future applications and prospects of molecular ballistics. [ABSTRACT FROM AUTHOR]

Gunshots to the human body can cause direct and indirect injuries. Direct injuries are a consequence of the projectile guiding its way through the body, creating a permanent wound channel and thereby damaging the penetrated as well as the adjacent tissue. In addition, the temporary wound cavity is responsible for indirect injuries occurring distant to the actual wound tract. This can potentially affect different types of tissue, like blood vessels, organs, or bones, that are not directly passed through by the projectile. For this case report, we describe a suicidal headshot to the temporal area where the extension of the temporary wound cavity and its subsequent collapse led to massive energy transfer to the surrounding tissue leading to breakage of the upper dental prosthesis and fractures of the lower jaw. Thereby outlining the ballistic mechanisms causing indirect injury pattern that have to be considered when examining gunshot wounds. [ABSTRACT FROM AUTHOR]