Search

We discuss experimental and numerical studies of the deformation and destruction of fine-grained concrete B22.5 under dynamic loading. The experiments were carried out using the Kolsky (or split-Hopkinson pressure bar) method, and its modifications in the strain rate range from 400 to 2000 s−1. The rate dependences of ultimate stresses and fracture energy in tension and compression are obtained. Based on experimental data, the identification of the dynamic component of two models from the LS-DYNA computational complex was carried out: *MAT_CONCRETE_DAMAGE and *MAT_CSCM. The results of a comparative analysis of the identified models based on single-element modeling and comparison with experimental data are presented. It is shown that the obtained experimental strain rate dependences of the fracture characteristics can significantly improve the predictive ability of the model compared to the default parameter set. Information about the rate dependence of the fracture energy in *MAT_CSCM model makes it possible to more realistically simulate the behavior of the material beyond the ultimate stress. [ABSTRACT FROM AUTHOR]

We formulate a series of strong ellipticity inequalities for equilibrium equations of the gradient elasticity up to the Nth order. Within this model of a continuum, there exists a deformation energy introduced as an objective function of deformation gradients up to the Nth order. As a result, the equilibrium equations constitute a system of 2 N -order nonlinear partial differential equations (PDEs). Using these inequalities for a boundary-value problem with the Dirichlet boundary conditions, we prove the positive definiteness of the second variation of the functional of the total energy. In other words, we establish sufficient conditions for infinitesimal instability. Here, we restrict ourselves to a particular class of deformations which includes affine deformations. [ABSTRACT FROM AUTHOR]

It is worth mentioning stress and strain gradient elasticity, surface elasticity, media with internal degrees of freedom, and nonlocal continua among others. 32967152 10 Tocci Monaco G., Fantuzzi N., Fabbrocino F., Luciano R. Critical temperatures for vibrations and buckling of magneto-electro-elastic nonlocal strain gradient plates. Recent advances in technologies of design, manufacturing and further studies of new materials and structures result in an essential extension of classic models of continuum and structural mechanics. [Extracted from the article]

Dynamic tests of fine-grained fired dioxide-zirconia ceramics under compression under uniaxial stress conditions were carried out. The influence of the specimen length on the obtained strength and deformation properties of ceramics is investigated. The thickness of the specimen has a significant impact on the course of the obtained dynamic stress–strain diagrams: short specimens have a much more sloping area of active loading branch. The main contribution to the modulus of the load branch resulting from tests of brittle porous media is made by the geometry of the specimens and the porosity of the material. When choosing the length of specimens for dynamic tests, the optimal geometry of the tested specimens is preferable in accordance with the Davies–Hunter criterion, when the contributions of axial and radial inertia are mutually compensated, and the contribution of the effects of friction in the resulting diagram is minimal. When choosing the geometry of specimens of brittle porous media, the structure of the material should be taken into account so that the size of the specimen (both length and diameter) exceeds the size of the internal fractions of the material by at least five times. [ABSTRACT FROM AUTHOR]

In recent years, the static and dynamic response of micro/nanobeams made of hyperelasticity materials received great attention. In the majority of studies in this area, the strain-stiffing effect that plays a major role in many hyperelastic materials has not been investigated deeply. Moreover, the influence of the size effect and large rotation for such a beam that is important for the large deformation was not addressed. This paper attempts to explore the free and forced vibrations of a micro/nanobeam made of a hyperelastic material incorporating strain-stiffening, size effect, and moderate rotation. The beam is modelled based on the Euler–Bernoulli beam theory, and strains are obtained via an extended von Kármán theory. Boundary conditions and governing equations are derived by way of Hamilton's principle. The multiple scales method is applied to obtain the frequency response equation, and Hamilton's technique is utilized to obtain the free undamped nonlinear frequency. The influence of important system parameters such as the stiffening parameter, damping coefficient, length of the beam, length-scale parameter, and forcing amplitude on the frequency response, force response, and nonlinear frequency is analyzed. Results show that the hyperelastic microbeam shows a nonlinear hardening behavior, which this type of nonlinearity gets stronger by increasing the strain-stiffening effect. Conversely, as the strain-stiffening effect is decreased, the nonlinear frequency is decreased accordingly. The evidence from this study suggests that incorporating strain-stiffening in hyperelastic beams could improve their vibrational performance. The model proposed in this paper is mathematically simple and can be utilized for other kinds of micro/nanobeams with different boundary conditions. [ABSTRACT FROM AUTHOR]