Search

[Display omitted] • A total of 20 different paper sludges were investigated. • A wide range of biomethane potentials was determined. • Inhibiting substances for some paper sludge were identified. • Co-digestion resulted in methane yield increase of 5–10%. • The possibility of anaerobic co-digestion could be demonstrated. In this work, the feasibility of the anaerobic digestion of paper sludge as a co-substrate in anaerobic digestion mechanical–biological treatment (MBT) plants is investigated. In the first phase, the biochemical properties, biomethane potential (BMP), and pollutant contents of 20 different industrial paper sludges are determined. Following the general evaluation in the BMP tests, the second phase of the project involves the semi-continuous co-digestion of six paper sludges in continuous stirred reactors (CSTR). Paper sludges are categorized according to their origin within the pulp and paper mills: Deinking Sludge (DS), Primary Sludge (PS) and Biological Sludge (BS). The analysis of potentially inhibiting elements shows that the concentrations of chlororganic compounds, mineral oil and some heavy metals are highest in DS, while the mean heavy metal loads in all paper sludges are relatively low compared to other industrial sludges. Large differences in total solids (TS) and volatile solids (VS) contents are observed among the different paper sludges investigated, with DS having the highest TS due to the high inorganic contents. The BMP of the investigated sludges ranges from 90 to 355 NL CH 4 kg−1 VS. In subsequent semi-continuous co-digestion experiments simulating MBT conditions, three DS and two fiber sludges (a mixture of PS and BS) show good methane generation rates, while one fiber sludge causes inhibition and indicates an increase in viscosity. In general, co-digestion of paper sludge in anaerobic digestion MBT plants can be a viable option for energy production and also facilitates a safe disposal of the paper sludge digestates. [ABSTRACT FROM AUTHOR]

This work reports an innovative simulation method for effectively utilizing paper-mill sludge based on the co-gasification approach for energy-enriched renewable fuel production. An Aspen plus-based co-gasification model was developed to simulate and examine the synergetic effects of biomass and paper-mill sludge co-gasification. Initially, the model was validated using experimental data from the reported literature and found good agreement regarding gasification and co-gasification approaches. Sensitivity analysis of biomass gasification revealed that the maximum H 2 content of 29.6% and CO (36.0%), LHV (7.8 MJ/Nm3), 72.2% (CCE) was obtained at optimal (850 °C: temperature; 1 bar: pressure; 0.2: ER) conditions. Further, the H 2 proportion enhanced, and CO declined to 38.8 and 30.7% at the same operating conditions, respectively, with a co-gasification ratio of 50% compared to 0% (H 2 : 29.6% and CO: 36.0%). However, with increasing the co-gasification ratio beyond 20%, the CO content started to follow upward trends; at the same CGR, the H 2 , LHV, and CCE observed were 36.0%, 7.76 MJ/Nm3, and 65.2%, respectively. Hence, the developed co-gasification model can provide vital information for large-scale gasifier design, operating decisions, and optimization using different biomass blends. • Biomass and PMS utilization to produce renewable fuel. • Co-gasification parametric effects evaluation on product yield. • Increasing the proportion of PMS in feedstock mixture increases H 2 content. • 20% PMS co-gasification provided consistency with reported literature. [ABSTRACT FROM AUTHOR]

Hydrogen is emerging as a critical player in transitioning to sustainable and renewable energy systems, serving roles in energy storage, grid balancing, and decarbonization. This paper explores various aspects of hydrogen, including its production through renewable-electricity-driven electrolysis, advanced storage techniques, and incorporation into current energy systems. It highlights primary electrolysis methods like PEM and alkaline, noting their improved efficiency and cost-effectiveness. Various hydrogen storage methods, such as physical, chemical, and advanced porous materials, are examined for their benefits and limitations. The review further explores hydrogen's integration into grid storage systems and microgrids to enhance energy reliability. It discusses hydrogen's application in fuel cells for electricity generation, focusing on technological advancements that improve efficiency and reduce costs. Additionally, the paper underscores hydrogen's crucial role in reducing CO 2 emissions in industrial processes like steel production and its use in residential and commercial energy supply through combined heat and power systems. Economic aspects and supportive policies from regions are analyzed, highlighting the global efforts and policies supporting the potential hydrogen in renewable energy systems. This analysis emphasizes hydrogen's comprehensive role in enhancing renewable energy systems and achieving global sustainability objectives, providing a thorough review of recent progress and challenges. • Identifies PEM and alkaline as efficient electrolysis methods. • Analyzes varied H 2 storage options for mobility and stationarity. • Highlights advancements in H 2 fuel cells for vehicles. • Discusses global policies supporting H 2 integration. • Reviews economic impacts of scaling H 2 infrastructure. [ABSTRACT FROM AUTHOR]

Climate change and energy crises are twin challenges that require collective wisdom and polygeneration energy systems for sustainable development. Hydrogen is an abundant element in the universe that can shape the future of energy transmission and storage from electrons to molecules. This paper presents utilization of a solar PV assisted hydrogen and electricity production and storage system for a university transportation fleet of 43 student transit buses to reduce annual 9842 liter fuel consumption and 26.52 Mt CO 2 emissions. The system is designed, modeled, and simulated using TRNSYS® energy simulation software and optimized in TrnOpt linked to GenOpt for dynamic weather conditions of Gujrat (Pakistan), Fargo (USA), London (UK). As a model, the results of a 27kW p PV system are presented that assists an alkaline electrolyzer generating 12696 m3 hydrogen, 6348 m3 oxygen, 16848 KWh electricity exported to national grid and 11.56 GJ thermal energy annually. The proposed system generates energy vectors including hydrogen, electricity, heat, and oxygen with optimal performance during intermittent weathers. In this paper, a business model canvas is developed for solar PV assisted hydrogen production and storage system. These outputs can be accredited to the hydrogen as an energy alternative for green and sustainable future for transportation sector. [Display omitted] • A paradigm energy shift from electron to molecules for a sustainable future. • A Solar assisted polygeneration system is dynamically simulated and optimized in TRNSYS for various climate conditions. • Proposed 27kWp system effectively produces 12696 m³ hydrogen, 6348 m³ oxygen, and exports 16848 kWh electricity to grid. • The system cuts annual fuel consumption by 9842 liters for university fleet, reducing CO 2 emissions by 26.52 Mt annually. • Developed a business model for the sustainable application of solar PV-assisted hydrogen production in transportation. [ABSTRACT FROM AUTHOR]

The paper is devoted to the development of a device for protecting facilities with turn-to-turn insulation, namely transformers and wind generators in order to increase the reliability of operation of electrical power systems, renewable energy installations and energy storage systems. The paper presents the results of experimental studies of the parameters of a prototype frequency-dependent device, as well as an assessment of the effectiveness of suppression of high-frequency surge voltages by the proposed device. The results of four groups of measurements are shown, which were compared with each other and with the results of previously showed computer simulations. The high efficiency of the proposed device when influencing the slope and amplitude of short high-frequency transients is shown. It is indicated that the parameters proposed earlier in the simulation allow the device to be used effectively. A brief analysis of alternative methods and means of protection is provided, and the prospects for using the device as protective equipment for wind power plants are also considered. [ABSTRACT FROM AUTHOR]

Green hydrogen is crucial for society's access to peaceful, secure, and stable energy sources to flourish sustainably and get universal government support. To protect the environment and provide energy security, it is essential to use hydrogen as a sustainable fuel and energy source to cover the energy baseload. This paper investigates the developments of renewable energy (RE) and the potential for green hydrogen in the Middle East and North Africa (MENA) region. There is a considerable chance to use RE because of the MENA region's excellent solar radiation. On the other hand, many countries in the MENA region are classified as one of the poorest in water resources and are known to have water-energy challenges. This paper focuses on the water needed to produce hydrogen in countries with water scarcity. A strengths, weaknesses, opportunities, and threats (SWOT) analysis was performed for green hydrogen generation in the MENA, where recommendations for countries with a water-energy nexus can be made. Additionally, this paper offers suggestions for creating a sustainable hydrogen economy, such as cutting back on the domestic use of fossil fuels, subsidizing the renewable production industry, and supporting hydrogen manufacturing. • Green hydrogen production is highly affected by water scarcity. • SWOT analysis was performed on green hydrogen generation in the MENA. • Recommendations were provided on a country-by-country basis. [ABSTRACT FROM AUTHOR]

Fossil fuels are deemed to diminish because of their limited availability, no renewability, and emissions of greenhouse gases and other poisonous materials to the atmosphere and the ecosystem. Renewable energy based on sustainable biomass has occupied an increasing share of the energy system over the past decade. Among several massively cultivated crops worldwide, corn, sugarcane bagasse, and soybean straws are some of the leading agricultural by-products that can generate substantial energy (e.g., biofuels, hydrogen) as vital sustainable energy to substitute non-renewable fossil fuels. This paper aims to review recent progress in renewable energy generation from biomass based on thermochemical techniques-i.e., gasification, pyrolysis, and liquefaction-detailed technical features and their application for extraction energy from biomass. The quality, composition, and productivity of renewable energy extracted from biomass based on existing thermochemical techniques are compared, and their technical dependencies upon the thermochemical processes are discussed. Furthermore, analysis of technical deficiencies of existing methods, and exploration of innovative emerging technologies for high-efficiency and high-quality renewable energy generation from biomass straws. In general, biomass gasification stands out as the most efficient technique for hydrogen production (HP) from biomass due to mature technology, high hydrogen yield, and potential for integration with other presented techniques. [Display omitted] • A detailed review of HP from biomass using thermochemical techniques. • Discussion about gasification, pyrolysis, and liquefication working principles. • Comparison between all types of presented thermal techniques. • Advantages and disadvantages of gasification, pyrolysis, and liquefication. • Overall performance of all thermal techniques presented in this review. [ABSTRACT FROM AUTHOR]

Power generation systems using photovoltaic (PV) technology have become increasingly popular due to their high production efficiency. A partial shading defect is the most common defect in this system under the process of production, diminishing both the amount and quality of energy produced. This paper proposes an Artificial Neural Network and Golden Eagle Optimization based prediction of the fault and its detection in a standalone PV system to recover the optimum performance and diagnosis of the PV system. The proposed technique combines the Artificial Neural Network (ANN) and Golden Eagle Optimization (GEO) algorithm. The major contribution of this work is to raise PV systems' performance. The result is a defect in the classification and identification of an ANN is used. The use of GEO provides an efficient optimization technique for ANN training, which reduces the training time and improves the accuracy of the model. The proposed technique is executed on the MATLAB site and contrasted with different present techniques, like genetic algorithm (GA),Elephant Herding Optimization (EHO) and Particle Swarm Optimization (PSO). The findings displays that the proposed technique is more accurate and effective than the existing methodologies for detecting and diagnosing defects in PV systems. • A hybrid technique for predict fault in standalone PV to improve the performance of PV • The proposed method is the joint execution of ANN and GEO • The major contribution of this work is to improve the performance of PV systems • The use of GEO provides an efficient optimization technique for ANN training • The proposed method is more accurate and effective than existing techniques [ABSTRACT FROM AUTHOR]

Extensive research on zero-emissions autonomous surface vehicles has been recently carried out, aiming at increasing autonomy. Due to their small size, unmanned vehicles present unique difficulties in terms of weight and dimensions when powering the vehicle with renewable energy sources. In this paper, photovoltaic source, fuel cell and Li-ion battery multi-source configurations are proposed, demonstrating by physical layout and simulation results the feasibility of the prototype, compliant with strict constraints of the vehicle under test. The energy system model of the vehicle under test is implemented in MATLAB/Simulink. A comparison of multi-source energy system configurations is proposed and validated by simulation results in terms of endurance, weight and size. If compared with the original battery-powered vehicle, as shown by comparing simulation results, the endurance is doubled, extended up to 12 h on the most favorable day of the year. The solution even complies with payload and physical dimensions constraints. • Autonomous surface vehicles: overview of the most competitive prototypes. • The SWAMP case study: experimental characterization of the battery-powered version. • Modelling and simulation of SWAMP PV-fuel cell–battery multi-source power supply. • Feasibility analysis and comparison of Multi-source power configurations. • Assessment of endurance, weight and size of multi-source configurations. [ABSTRACT FROM AUTHOR]

This paper investigates the feasibility and benefits of integrating hydrogen storage systems into off-grid power systems. As a case study, a stand-alone microgrid located on a small island in southeastern Sardinia (Italy) and already equipped with a photovoltaic (PV) system coupled with batteries is chosen. To evaluate the integration benefits of the two storage systems (hydrogen and batteries) and the optimal sizing of the hydrogen storage section, a parametric analysis with a simulation model implemented in the MATLAB environment has been carried out. Results show that the optimal integration between the two storage systems is found by imposing a share of the batteries (18 kWh, 50% of the overall battery capacity) to exclusively supply the load demand (called battery energy buffer). In these conditions, an almost 100% self-sufficiency of the microgrid can be achieved by a hydrogen generator with the lowest size considered (2.4 kW), a hydrogen storage volume of 10 m3 and a fuel cell, mainly able to completely cover the night loads, of 1.5 kW. This sizing leads to a Levelized Cost of Electricity (LCOE) for the hydrogen section of about 10.5 €/kWh. [Display omitted] • Investigation of a hydrogen storage into off-grid systems characterized by seasonal loads. • Determination of the hydrogen storage sizing through parametric analysis. • Optimal integration with batteries found by imposing an energy buffer equal to 50%. • Through the hydrogen storage, self-sufficiency higher than 99% is achieved. • Significant energy surcharges detected to ensure 100% green electricity. [ABSTRACT FROM AUTHOR]

This paper presents a powerful performance optimization approach for load frequency control in the off-grid mode of a delayed fuel cell microgrid with PI controller. The new approach based on stability boundary locus is used. Thanks to this, the search is only carried out in PI control parameter space keeping stable the system in the proposed optimization. The superiority of the proposed approach in terms of iteration history, fitness values, and time responses of the system is presented by comparing the results obtained. According to the results obtained, the proposed approach reaches the global minimum in a very short number of iterations and achieves this by both guaranteeing the stability of the system and providing the desired time response performances compared to the other method. • The stability of a delayed fuel cell microgrid system is a very important issue, especially in off grid mode. • A delayed fuel cell microgrid system should provide the desired quality of energy to the load. • The optimization approach provides the desired quality of energy to the load ensuring the stability of the microgrid. • Proposed optimization approach has great advantages in terms of iteration history and fitness value. [ABSTRACT FROM AUTHOR]

This paper investigates the impacts of economic (in)stability on carbon emissions and the role of renewable energy in these effects at the crossroads of accelerated climate change and rising global economic instability. The paper hypothesizes that these implications should be examined not by direct impacts across variables, but rather via indirect effects serially mediated by renewable energy consumption and economic growth. This paper analyzes the United States from January 1980 and April 2022 using manifest structural equation modeling. The paper reaches two major conclusions. First, there are clear distinctions between (i) the direct and indirect effects of economic stability, surrogated by inflation and policy interest rate, on carbon emissions, (ii) the symmetric and asymmetric indirect effects, and (iii) the roles of aggregate renewable energy and its components, such as biomass and hydropower energy use, in mediating these symmetric and asymmetric indirect effects. Second, renewable energy significantly reduces the carbon-increasing effects of inflation and interest rates. The paper contains proper policy suggestions based on the findings. [ABSTRACT FROM AUTHOR]

The global problem of climate change and difficulties related to energy access, air pollution, and water pollution in India (and other developing countries) necessitate the need to look for alternative clean, local, and low-carbon energy sources for displacing fossil fuels. This paper analyses the existing waste-to-biomethane potential of the sericulture, fisheries, and agro-industrial sectors in India, which have mostly been neglected previously in India's waste-to-energy assessments. In the process, the volume of wastewaters generated from India's agro-industries are also estimated, data on which are scarce in the academic and grey literature. India's annual biomethane potentials (for 2018–19) were found to be 88 million m3, 207 million m3, and 3514 million m3 from the three sectors, respectively. To assess the energy generation potential of these wastes, a comprehensive literature review was conducted and data on residue-to-product ratios, results of proximate analyses, and specific biomethane yields were either compiled or calculated. The gross thermal energy and electricity generation potentials are 132 PJ and 22 TWh respectively; between 19 and 95 million people can benefit from such waste-to-energy production, depending on the end use of the biomethane for electricity generation or as a domestic cooking fuel. The corresponding mean removal of organic pollution from India's surface waters can be between 5.5 and 9.3 million tonnes of chemical oxygen demand. For the end uses of biomethane in electricity generation and cooking, the cumulative GHG abatements attributable to these industries are 11.4 million tonnes and 6.8 million tonnes of carbon dioxide-equivalent respectively. Besides the numeric results reported, this paper also contains a comprehensive compilation of data on waste characteristics and biomethane productions. The present status of biogas generation and related policy implementation in India are reviewed and discussed. Overall, our findings indicate that biomethane from these wastes and wastewaters can generate substantial energy for India, is in line with recent government policies, and can aid India in achieving six Sustainable Development Goals of the United Nations. • Annual estimates of wastes from India's sericulture, fisheries and agro-industries • The corresponding annual biomethane generation potential is 3810 million m3. • Clean electricity or cooking gas for 19 and 95 million people respectively • Quantitative estimates of atmospheric GHG and surface water COD removals • Biomethane data compilation and a review of present status and policies in India [ABSTRACT FROM AUTHOR]

Attributed to the growing focus on energy savings and eco-friendliness, the solar PV-based DC Nano-grids for residential and commercial buildings are becoming more popular. On the other hand, solar photovoltaic systems (SPV) are intermittent and unreliable due to their dependency on external factors such as solar irradiance, ambient temperature, and unpredictable shadows. In addition, the power degradation occurs in SPV systems due to module mismatch losses caused by various factors like partial shading (PS), dissimilar aging effect, different power ratings, etc. The conventional PV system cannot handle all these issues, so it is essential to address them. This paper proposes a bidirectional modular PV battery system (BMPBS) that uses non-isolated buck and boost converter combinations. This system is capable of self-sustained generation, storage, and bidirectional power flow within the Nano-grid. The proposed BMPBS can handle losses due to module mismatch and intermittency in SPV with the help of battery storage system (BSS), making the overall SPV system reliable. It requires single-stage power conversion to extract maximum power from each PV module and BSS charging and discharging. Its modular design allows it to function across various voltage, power, and BSS choices. This paper discusses the operation, steady-state analysis, and dynamic analysis of the proposed BMPBS. The performance of the proposed BMPBS is validated using a state-of-the-art experimental setup with two PV modules, each having a rating of 90 W P . • The proposed BMPBS is capable of self-sustained generation, storage, and bidirectional power flow within the Nano-grid. • The proposed BMPBS can handle open circuit in SPV or battery module. • The proposed BMPBS can mitigate the module mismatch losses of solar PV (SPV). • The proposed BMPBS is able to handle intermittency in SPV with the help of a battery storage system (BSS). • This system requires single stage power conversion increasing the overall efficiency. • This system uses single inductor making the overall system compact. • Its modular design allows it to function across various voltage, power, and BSS choices. [ABSTRACT FROM AUTHOR]

Vanadium Flow Batteries (VFBs) are a stationary energy storage technology, that can play a pivotal role in the integration of renewable sources into the electrical grid, thanks to unique advantages like power and energy independent sizing, no risk of explosion or fire and extremely long operating life. The first part of this paper presents the main features and the basic performance parameters of VFB, which determine their electric, hydraulic, thermal, and aging feature. The latter part outlines the strengths and weaknesses of the technology, the services that it can provide to the grid, and a short economic analysis. After presenting the fundaments of the technology, prospects and trends of VFBs deployment are outlined. Most of the considerations highlighted in this paper are inspired to studies performed on an industrial-size VFB operated at the Electrochemical Energy Storage and Conversion Lab (EESCoLab) at the University of Padua (Italy). [ABSTRACT FROM AUTHOR]

The production of green hydrogen through electrolysis, utilizing renewable energies, is recognized as a pivotal element in the pursuit of decarbonization. In order to attain cost competitiveness for green hydrogen, reasonable generation costs are imperative. To identify cost-effective import partners for Germany, given its limited green hydrogen production capabilities, this study undertakes an exhaustive techno-economic analysis to determine the potential Levelized Cost of Hydrogen in Germany, Norway, Spain, Algeria, Morocco, and Egypt for the year 2050, which represents a critical milestone in European decarbonization efforts. Employing a stochastic approach with Monte Carlo simulations, the paper marks a significant contribution for projecting future cost ranges, acknowledging the multitude of uncertainties inherent in related cost parameters and emphasizing the importance of randomness in these assessments. Country-specific Weighted Average Cost of Capital are calculated in order to create a refined understanding of political and economic influences on cost formation, rather than using a uniform value across all investigated nations. Key findings reveal that among the evaluated nations, PV-based hydrogen emerges as the most cost-efficient alternative in all countries except Norway, with Spain presenting the lowest Levelized Cost of Hydrogen at 1.66 €/kg to 3.12 €/kg, followed by Algeria (1.72 €/kg to 3.23 €/kg) and Morocco (1.73 €/kg to 3.28 €/kg). Consequently, for economically favorable import options, Germany is advised to prioritize PV-based hydrogen imports from these countries. Additionally, hydrogen derived from onshore wind in Norway (2.24 €/kg to 3.73 €/kg) offers a feasible import alternative. To ensure supply chain diversity and reduce dependency on a single source, a mixed import strategy is advisable. Despite having the lowest electricity cost, Egypt shows the highest Levelized Cost of Hydrogen, primarily due to a significant Weighted Average Cost of Capital. • LCOH projections for 2050 were determined through Monte Carlo Simulation. • PV-based hydrogen is the most cost-effective option in all countries except Norway. • Spain exhibits the lowest LCOH, followed by Algeria and Morocco. • Country-specific WACC variations significantly impact the LCOH. • Importing from Spain, Algeria, Morocco (PV), and Norway (onshore) is advised. [ABSTRACT FROM AUTHOR]

[Display omitted] • The load capacity curve hypothesis for green energy and ecological footprints. • Employ GMM and Panel quantile regression for 2000–2020. • Greener energy consumption (GEC) determines load capacity factor (LCP) unlike to ecological footprint and bio-capacity. • Renewable and Clean energy is recommended to address climatic vulnerability. • Study discusses policy-related implications for sustainable development. This paper examines the load capacity curve hypothesis by the tourism and renewable energy from top tourism economies in the World. We employ the data from 2000 to 2020 and applied the panel GMM and panel quantile regression to arrive at our empirical findings. The results of the two models demonstrate the non-validity of the Load Capability Curve (LCC) hypothesis and the significant role of touristic arrival (TRA) and greener energy consumption (GEC) on the load capacity factor (LCP) by contrasting the ecological footprint per capita and bio-capacity. Furthermore, renewable and clean energy is recommended to address air pollution and climatic vulnerability. Thus, the empirical results of the current study provide acumens for policymakers of top tourism economies to consume green innovation technologies to counterbalance the environmental and socio-economic issues induced by the tourism sector without halting economic growth and sustainable tourism development. The study discusses policy-related implications for sustainable development. [ABSTRACT FROM AUTHOR]

[Display omitted] • Environmental impact modeling under EKC and LCC hypotheses examined. • LM-Bootstrap Cointegration tests and Drisscoll-Kraay regressions applied. • Financial development and load capacity factor are negatively correlated. • Environmental quality is adversely affected by economic expansion. • EKC and LCC hypotheses are valid for BRICS countries. Multiple human activities influence the physical environment, interacting with humans and their surroundings. Our existence depends on various natural resources harvested or extracted from the environment, such as food, materials, and energy. This paper examines the environmental impact modeling and efficient use of nuclear and renewable energy while considering the roles of energy efficiency under the assumptions of EKC and LCC hypotheses in BRICS countries from 1990 to 2018. The long-run estimates are based on LM-Bootstrap Cointegration tests and Drisscoll-Kraay regressions. Financial development has been observed to have a negative relationship with the load capacity factor. However, interestingly, financial development has been found to have a positive relationship with CO 2 emissions. Our findings indicate that the load capacity factor negatively correlates with economic growth in the long run—an increase in economic growth results in a reduction in load capacity. The long-term impact of economic expansion is a decline in environmental quality. Moreover, economic growth square is positive in the load capacity factor and negative in the case of CO 2 emissions. This situation reflects the EKC and LCC hypothesis in the BRICS countries. When income increases, environmental quality initially decreases, and once a certain level of income is reached, ecological sensitivity and green technologies increase the load capacity factor. The negative coefficient value in the case of economic growth and the positive coefficient value of the square root of economic growth determines the LCC hypothesis, which is U shape relationship. On the other hand, the negative coefficient value of economic growth followed by the positive coefficient value of the square root of economic growth determines the existence of the EKC hypothesis in the BRICS countries, which is an inverse relationship. Research limitations and future directions are discussed. [ABSTRACT FROM AUTHOR]

[Display omitted] • The determinants of the load capacity factor are investigated in top SDGs nations. • Distributional heterogeneity controlled using novel Method of Moments Quantile Regression. • Technology, renewable energy, globalization and environmental tax increase the load capacity factor. • Economic growth curb load capacity factor. • Interaction between renewable energy and technology innovation reduces load capacity factor level. The acceptance of Sustainable Development Goals (SDGs) in 2015 shifted the consideration toward sustainability-linked aspects in both developed and developing nations. Currently, the most critical ecological and economic problems are associated to ecological contamination and sustainability. Thus, this current study employs load capacity factor (LCF), a comprehensive ecological assessment tool that captures both the ecological foot (demand side) and biocapacity (supply side) of the ecosystem to scrutinize the effect of environmental taxes, technological innovation and renewable energy on LCF while regulatory for globalization and economic progress in the case of top ten SDGs nations. The paper used MMQR to capture the influence of each variable at different quantiles from 1994 to 2018. The study's outcome shows that technology innovation, environmental Tax, renewable energy and globalization are negative and significant in reducing LCF within the countries. Again, the study exposed that economic growth contributes positively to LCF. However, the interaction term between technology innovation and renewable energy upsurges the LCF across all the quantiles. Moreover, the panel Dumitrescu and Hurlin causality test results revealed a one-way causality exists between economic growth and LCF, running from economic growth to LCF. The outcomes of this research will have a significant impact on the route that policymakers in these nations take in reaching net zero emissions. [ABSTRACT FROM AUTHOR]

Liquid organic hydrogen carriers (LOHC) can be used as a lossless form of hydrogen storage at ambient conditions. The storage cycle consists of the exothermic hydrogenation of a hydrogen-lean molecule at the start of the transport, usually the hydrogen production site, becoming a hydrogen-rich molecule. This loaded molecule can be transported long distances or be used as long-term storage due to its ability to not lose hydrogen over long periods of time. At the site or time of required hydrogen production, the hydrogen can be released through an endothermic dehydrogenation reaction. LOHCs show similar properties to crude oils, such as petroleum and diesel, allowing easy handling and possibilities of integration with current infrastructure. Using this background, this paper reviews a variety of aspects of the LOHC life cycle, with a focus on currently studied materials. Important factors such as the hydrogenation and dehydrogenation requirements for each material are analysed to determine their ability to be used in current scenarios. Toluene and dibenzyltoluene are attractive options with promising storage attributes, however their dehydrogenation enthalpies remain a problem. The economic feasibility of LOHCs being used as a delivery device were briefly analysed. LOHCs have been shown to be the cheapest option for long distance transport (>200 km), and are cheaper than most at shorter distances in terms of specifically transport costs. The major capital cost of an LOHC delivery chain remains the initial investment for the raw materials and the cost of equipment for performing hydrogenation and dehydrogenation. Finally, some studies in developing the LOHC field were discussed, such as microwave enhancing parts of the process and mixing LOHCs to acquire more advantageous properties. • Efficient hydrogen storage solution for sustainable energy transportation and storage. • Enables safe and cost-effective hydrogen transportation and distribution networks. • Promotes renewable energy integration through versatile and scalable storage capabilities. • Facilitates decarbonization efforts by enabling long-term, stable hydrogen supply chains. [ABSTRACT FROM AUTHOR]

Along with the popularity of the environment, social and governance (ESG) concerns, the circular economy concept has gained tremendous attraction from the industries, policy makers and academicians. On a firm level, this is implemented through the so-called Circular Business Model (CBM), which is seen through various initiatives. This includes firms in the energy industry, who are transitioning from conventional to renewable energy sources. Nevertheless, despite of the importance and the omnipresence of the practice, there is still lack of empirical research within the CBM topic. In particular, empirical research combining the CBM and technological innovation topic within energy industry (as technology-intensive and high risk industry) in developing country such as Indonesia, is still lacking. To answer this gap, using literature review as research method, this paper has arrived into the following propositions as main result; (1) there is a positive relationship between firm's level of CBM and technology innovation adoption to firm's performance, where (2) the two antecedents that are positively impacting firm's level of CBM and technology innovation adoption are leader's innovativeness and perceived level of technology. For academicians, this research is expected to provide contribution to the energy transition literatures within CBM and technology innovation adoption topic. Propositions provided in this paper is expected to serve as valuable basis in conducting further empirical research. For practitioners, this research is expected to provide valuable insights to make improvements and/or innovations in terms of business model, technology adoption, and strategy. At last, this research is expected to support energy transition. [ABSTRACT FROM AUTHOR]

This paper examines the impact of green finance on environmental performance in developing countries. Using panel cointegration analysis and panel vector error correction model (VECM) to a sample of 76 developing economies from 2010 to 2019, this study confirms that carbon emissions (CO 2) is cointegrated with green finance, real gross domestic product, urbanization, and renewable energy under different specifications and therefore we estimate the long-run relationships among these variables. Specifically, both green finance and renewable energy are found to exert significant and inhibitory effects on CO 2 emissions, reaffirming the necessity to promote green finance and renewable energy. Results from the paper also document the existence of the Environmental Kuznets Curve and the increasing effects of urbanization on CO 2 emissions. Several policy implications and recommendations are drawn from this study. • We examine impact of green finance on environmental performance. • 76 developing economies from 2010 to 2019 are considered. • Green finance and renewable energy exert inhibitory effects on CO 2 emissions. • Results support the existence of the Environmental Kuznets Curve. [ABSTRACT FROM AUTHOR]

This article presents a state-of-the-art review of the status, development, and prospects of DC-based microgrids. In recent years, researchers' focus has shifted to DC-based microgrids as a better and more feasible solution for meeting local loads at the consumer level while complementing a given power system's reliability, stability, and controllability. DC microgrid has an advantage in terms of compatibility with renewable energy systems (RESs), energy storage, modern electrical appliances, high efficiency, and reliability. However, the integration of different distributed generations has complicated the control of bus voltage and current. Therefore, several efforts have been made in the research community to further explore efficient control techniques for a reliable and stable DC microgrid. In spite of the numerous review papers published on DC microgrid control, so far, not any has given sufficient emphasis on the power flow analysis methods used in various DC microgrid topologies and the hybrid control topologies discussed in this review. In general, this paper presents a meticulous explanation of DC microgrid architecture; power flow analysis; control strategies with comparative analysis; challenges with recommendations; as well as classical and intelligent-based energy management strategy (EMS). Finally, suggestion for further research is presented. This review paper will go a long way in helping readers to understand the present state of development on DC microgrid control. [ABSTRACT FROM AUTHOR]

The primary purpose of this paper is to investigate the effects of two variables, trade openness and the issuance of green bonds, on the consumption of renewable energy in Southeast Asian countries. Quarterly data throughout 2016–2021 in the framework of the panel data method were used for the case of 6 selected countries (Indonesia, Malaysia, Philippines, Singapore, Thailand, and Vietnam). The results confirmed that the issuance of green bonds is an effective green financing tool in the implementation of the development policy of the deployment of renewable energy in the countries of the Southeast Asian region. The degree of trade openness has a driving effect on increasing renewable energy consumption due to the increased possibility of transferring green technologies and increasing interactions with leading countries in the field of sustainable development. The typical standard of green bonds, green scientific network (GSN), the development of e-commerce, and the publication of digital green papers are the recommended practical policies of this research. • Green bond is an effective tool to increase of deployment of renewable energy. • Trade liberalism increases the deployment of renewable energy. • Green R&D is a leading factor in the field of clean energy consumption. [ABSTRACT FROM AUTHOR]

Sustainable energy demand drives innovation in energy production. Electrolysis of water can produce carbon-free hydrogen from renewable sources. This paper presents a bibliometric analysis of recent and highly referenced research on hydrogen electrolysers utilising the Scopus database to shed insight into future trends and applications. It has been discovered that the most frequently published type of study for top-ranked papers is the formulation of problems and simulations (38.3%), followed by a study of the state-of-the-art technology assessment (32.5%), laboratory research, design, and performance evaluation (24.2%), and reviews (5%). In general, 33.33% of articles focused on controlling hydrogen electrolyser efficiency. This study used different case studies from the global literature to conduct a complete evaluation of the electrolyser statistical analysis of the present state of the art, models or modes of operation, key challenges, outstanding issues, and future research. This evaluation will aid researchers in building a commercially successful hydrogen electrolyser. • A comprehensive review on hydrogen electrolyser is analysed for future research directions. • The problems, state-of-the-art technology, design, and performance evaluation is reviewed. • The control strategies are significantly boost the efficiency of hydrogen electrolysers. • A statistical analysis on electrolyser models, open issues, and future research trend is investigated. • This review will contribute to improve the efficiency and sustainability of electrolyser technology. [ABSTRACT FROM AUTHOR]

Hydrogen energy storage system (HESS) has excellent potential in high-proportion renewable energy systems due to its high energy density and seasonal storage characteristics. After detailing the volatility of wind speed, irradiance and load, this paper proposes a bi-level optimization model to analyze the economic operation of the wind-photovoltaic-hydrogen hybrid system (WPH-HS). First, the relationship between the source-load output matching and operating conditions of HESS is studied, two evaluation indicators are described, which can be adjusted by wind-solar complementarity on the source side and demand response on the load side. Second, considering the levelized cost of storage (LCOS), the total annual cost (TAC) calculation method of WPH-HS is presented, and this paper provides a new hybrid optimization technology of chaotic search, particle swarm optimization and non-dominated sorting genetic algorithm2. Finally, the system is simulated with the MATLAB software to determine the optimal sizing of components and minimize the LCOS while ensuring the optimal TAC. The simulation results are elaborated in detail. In particular, the added source-load interaction reduces the TAC and LCOS by 7.3% and 10.3%. When two indicators reach 0.03 and 0.1745, the system is economically viable with the LCOS of 0.276 USD/kWh. The hybrid optimization algorithm can achieve better result in fewer iterations. • The cross-season utilization of the hydrogen energy storage system is discussed. • A price bi-level model about the levelized cost of storage and the total annual cost is established. • Evaluation indicators are presented to promote the source-load interaction. • Effects of wind speed, irradiance, and loads are investigated for the levelized cost of storage. • A hybrid optimization algorithm based on three common algorithms is designed. [ABSTRACT FROM AUTHOR]

A range of existing and newly developed hydrogen standards, certification and labelling (SCL) schemes aim to promote the role of 'renewable', 'clean' or 'green' hydrogen in decarbonising energy transitions. This paper analyses a sample of these SCLs to assess their role in the scaling up of renewable hydrogen and its derivatives. To analyse these hydrogen SCLs, we embellish a novel conceptual framework that brings together Sustainability, Systems Thinking, and Governance (SSG) literatures. The results reveal noteworthy scheme differences in motivation, approach, criteria, and governance; highlighting the complex, interconnected, and dynamic reality within which energy systems are embedded. We consider whether the sustainable utilisation of renewable hydrogen is well-served by the proliferation of SCLs and recommend an SSG-informed approach. An SSG approach will better promote collaboration towards an authoritative, global, multistakeholder, compromise on hydrogen certification that balances economic considerations with social, and environmental dimensions. [Display omitted] • There is a proliferation of hydrogen standards, certification and labelling (SCL) schemes. • We analyse a sample of SCLs to investigate their role in scaling green hydrogen. • We employ a Sustainability, Systems Thinking, and Governance (SSG) approach. • We recommend an SSG lens to help craft a global multistakeholder initiative. [ABSTRACT FROM AUTHOR]

This paper deals with a dynamical analysis of a supercapacitor based multilevel inverter. In Fact, applications for multi-level inverters based on supercapacitors include uninterruptible power supplies (UPS), grid-tied renewable energy systems, electric vehicles, and other power conversion systems where high-power quality and rapid energy transfer are important. These systems are the subject of ongoing research and development in the field of power electronics and energy storage, as they have the potential to enhance the performance and efficiency of various electrical and electronic applications. However, If the input voltage sources are fixed, this can limit the flexibility of the inverter, especially in terms of regulating the output voltage and adapting to load variations. This study is focused on the dynamic analyses which is crucial for designing, optimizing, and verifying the performance of supercapacitor-based multi-level inverters in various applications. Hence, the behaviour of the system was studied on a resistive load, material calculations showing the functioning of the circuit as well as simulations were performed for the positive phase of the sinusoid at the terminals of the charge. [ABSTRACT FROM AUTHOR]

This paper investigates an innovative study on the performance of a hybrid condensing boiler-fuel cell micro-cogeneration system for single residential applications. It combines experimental and dynamic numerical investigations including renewable energy for green hydrogen production and solid storage. Basing on the hourly measurements for a typical winter day, a dynamic model was developed and validated against different home heating need. Highlighting the influence home energy needs on fuel cell operating mode, it shows that single homes with low energy demand led to reduce the fuel cell's yearly operation below 50 %. In low-energy homes, a reduction in fuel cell size led to an increase in yearly operation to 60-70 % and achieved a 55 % electrical coverage rate. The integration of metal hydride hydrogen solid storage, powered by renewable sources, is emphasized. This setup increases heat demand, influencing fuel cell operation. In winter season, fuel cell operated for an average of 611 h, compared to 61 h in summer. System efficiency averaged 91 % annually, peaked at 95 % in summer, and sustained 93 % when both FC and condensing boiler were switched on. [Display omitted] • Modeling of a hybrid Boiler-Fuel Cell MCHP system for residential energy management. • Calibration of the FC-MCHP model using experimental data from a real MCHP unit. • Electrical and thermal coverage of the FC-MCHP unit with green hydrogen production and storage under different scenarios. • Strategies for optimal hydrogen consumption in in residential application. • Impact of solid-state hydrogen storage on FC-MCHP consumption and thermal management. [ABSTRACT FROM AUTHOR]

This paper focuses on the design and use of a control system for a renewable energy production plant based on hydrogen. The proposed control system aims at ensuring the stability and smooth functionality of the plant, which consists of a (i) photovoltaic system connected to an electrolyzer through a battery, (ii) a DC/DC step down transformer, and (iii) an electrolyzer heat exchange system. In this study, solar irradiance is the main system input, and hydrogen production the main output. Since the system utilizes solar energy as input, it depends on the random input of solar irradiance, ambient temperature, and wind flow. Furthermore, the electrolyzer's functionality is subject to several operational variables including cell voltage, current, temperature, and pressure. The electrolyzer heat exchange system operates at specified water temperatures and flow rates. The DC/DC output voltage, and therefore the voltage supplied to the electrolyzer, is regulated by changing its duty cycle. To regulate hydrogen production in the renewable energy production plant, an efficient control system is required. Accordingly, in this work, a control system is designed accounting for three different electrolyzer technologies, alkaline, PEM (proton exchange membrane), and E-TAC (electrochemical - thermally activated chemical water splitting). Subsequently, the effectiveness of the control system is analyzed using Matlab and Simulink models. The main results indicate that the battery is a crucial element in the whole system as it supplies the necessary energy to the electrolyzer. By regulating the appropriate components, the proposed control system proved capable of minimizing power fluctuations and increasing system efficiency up to 20% depending on ambient conditions. Additionally, the results indicate E-TAC and PEM efficiencies 13% and 7% higher than alkaline, respectively. [Display omitted] • Design of a control system for three different electrolyzer technologies. • Use of control systems for electrolyzer voltage and heat exchange. • Photovoltaic system connected to an electrolytic one through a battery. • Proposed control system increases system efficiency up to 20%. [ABSTRACT FROM AUTHOR]

The development of sustainable energy sources has become a major challenge for society. Green hydrogen, produced through the electrolysis of water using renewable energy sources, offers a potential solution to reducing our dependence on fossil fuels. The paper examines the integration of green hydrogen into various sectors, such as transportation, industry, power generation, and heating, highlighting its potential to decarbonize traditionally carbon-intensive areas. Furthermore, it analyses the strategies and policies employed by the European Union, Australia, Japan, the United States, and Canada to drive the development and adoption of green hydrogen technologies. The challenges and barriers that need to be addressed to fully realize the potential of green hydrogen, such as technological limitations, infrastructure development, costs and economic feasibility, regulatory and policy frameworks, and public perception and acceptance, have been investigated. Recommendations for overcoming these challenges and accelerating the adoption of green hydrogen technologies are provided, and the importance of research and development in this sector is emphasized. • Green hydrogen offers a sustainable solution to reduce fossil fuel dependency, decarbonizing key sectors. • Analyzed policies from the EU, Australia, Japan, the US, and Canada to foster green hydrogen technologies. • Discussing challenges: green hydrogen potential, tech limits, infrastructure, costs, regs, and public views. • Emphasized the importance of R&D and offers accelerating the adoption of green hydrogen technologies. [ABSTRACT FROM AUTHOR]

In this paper, a novel stochastic risk-averse mixed-integer linear programming (MILP) model is developed for optimal electricity procurement of hydrogen fuel stations (HFSs) with responsive hydrogen demands. In the developed model, HFS operator may procure its required electricity through day-ahead (DA) market, bilateral contracts, a contract with withdrawal penalty (CWP) and balancing market. The HFS is committed to inject a pre-specified volume of hydrogen into a natural gas network. In the developed stochastic model, the uncertainties in hydrogen demand and DA market prices are characterized as random variables and modeled as scenarios. The developed model is a two-stage model in which the decisions on transactions with bilateral contracts are the first-stage decision variables and the other decision variables belong to the second stage. The risk of suffering from high procurement costs is modeled using the Conditional Value at Risk (CVaR). The results confirm the efficiency of the proposed model both in terms of reduction in HFS expected cost and risk alleviation. The results show that the transaction through bilateral contracts decreases the expected cost and CVaR respectively by 6% and 3%. The results also indicate that the participation in the balancing market decreases the expected cost and CVaR respectively by 6% and 1.6%. As per results, in scenarios in which DA market prices are lower than CWP prices, HFS operator prefers to pay a penalty fee and withdraw from CWP. The sensitivity of HFS profit to the weight factor of risk metric and the participation factor of responsive demands are assessed. [Display omitted] • A model is developed for electricity procurement of hydrogen fuel stations (HFSs). • The uncertainties in demands and market prices are considered. • HFS procures electricity by day-ahead and balancing market and bilateral contracts. • Impact of different markets and transactions on HFS profit is assessed. • Sensitivity of HFS profit to weight of risk metric is assessed. [ABSTRACT FROM AUTHOR]

Renewable energies are available as clean sources to replace fossil fuels. Providing continuous power without compromising the environment through hybridizing solar and biomass source is one of the promising solutions. This paper seeks to address thermodynamic, economic, and environmental analysis of a multi-generation system with the aim of supplying heating, cooling, electricity, fresh-water, and hydrogen. To do this, the considered system is divided into on-peak, mid-peak, and off-peak periods and modeled based on the consumption pattern at different hours of the day and night. Due to the availability of renewable energy during peak consumption periods, biomass, solar, and hybrid biomass-solar energies are used as energy sources. This leads to a reduction in biomass consumption and carbon dioxide emissions through storing approximately 10 tons of biomass during the day. A sensitivity analysis of the factors affecting the system's function indicated that a growth in solar radiation from 600 to 1000 W/m2, results in a 35% improvement in exergy efficiency, a 2.7% raise in the total cost rate, and a 32.4% drop in CO 2 emissions of the system. Moreover, by changing the biomass flow rate from 0.5 to 1.5 kg/s, the exergy efficiency and total cost rate improved by 9.28%, 1.3%, respectively, and the CO 2 emissions rate increased from 0.41 to 1.14 tons/MWh. In addition, focusing on addressing economic and environmental concerns, the optimization of the proposed hybrid system is performed in two categories of objective functions. In the second category optimization, exergy efficiency, fresh water production, total cost rate and CO 2 emissions are determined as 31.75%, 74.75 kg/s, 324.60 $/h and 3.55 tons/MWh, respectively. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • Renewable energy generation on energy security in G7 countries. • The panel ARDL, QQR, and Dumitrescu-Hurlin causality analyses were employed. • The impact of renewable energy generation on energy security was analyzed. Energy security has been brought into the foreground of political and economic agendas nowadays. However, this variable has been only in very few papers employed as dependent or independent variable. In most research so far, energy security is implied and is proxied by certain variables. The aim of this study is to investigate the relationship between energy generation from renewable energy sources and energy security in the G7 countries for the period 1980–2018 by using the panel autoregressive distributed lag, panel quantile-on-quantile regression and the Dumitrescu-Hurlin panel Granger causality analyses. The results reveal that there is a uni-directional causal link from renewable energy to energy security in the short-run and generating energy from renewable sources significantly reduces the risks that threaten energy security in the long run. Furthermore, quantile-on-quantile regression estimates indicate that, for the quantile above 0.5 in terms of renewable energy generation, energy security risks are reduced, and secure access to energy is strengthened in the G7 countries. The diverse implications generated by each methodology are particularly relevant today, given the current energy crisis in Europe and the pressing need to increase the share of renewable energy generation to mitigate energy security risks. [ABSTRACT FROM AUTHOR]

In recent decades, the role of green energy in realizing green transition and addressing environmental degradation needs to be brought into full play. To promote green energy development in China, this paper examines the relationship among green economic growth, green finance, and green energy (3G) between 2011 and 2019. The heterogeneous, asymmetric, and mediation impact relationship that exists in the 3G nexus is also explored in this study. Accordingly, the results suggest that: (1) Green economic growth and green finance are positively associated with green energy, and the impact is heterogeneous on different types of green energy and in different regions; (2) the impact of green economic growth on green energy are asymmetric, while that of green finance is consistent; and (3) green innovative technology is an effective mediator between green economic growth and green energy, while the investment effect is not significant. This paper contributes to formulating several reasonable policies for improving the green energy industry and achieving sustainable development. It is essential to give full play to the transformation of green achievements to enhance the role of green economic growth in promoting the green energy industry. • This study explores 3G nexus (green economic growth, finance, and energy (GRE)) in China. • The heterogeneity, asymmetry, and mediating mechanism are further analyzed. • Green economic growth and green finance can significantly promote GRE. • The impacts of green economic growth and green finance on GRE are heterogeneous. • Green technological innovation is an effective mediator in the 3G nexus. [ABSTRACT FROM AUTHOR]

This paper has sorted out the general logic of the impact of COVID-19 on energy consumption. In the short term, the epidemic has forced governments to adopt different levels of lockdown measures. The total electricity consumption decreased and the share of renewable energy has increased. Based on the International Energy Agency's (IEA) data on electricity production and consumption, this paper analyzes the long-term effects: The COVID-19 pandemic does affect overall electricity demand and market structure in the short term, but in the long term, the impact of the pandemic is detrimental to the proportion of electricity generated from renewable sources. Increased, especially in hard-hit countries. The impact on countries with different levels of development is different, and countries with higher levels of economic development are better able to resist such exogenous shocks. The pandemic is still ongoing, how to steadily promote sustainable development? In this paper we suggest that to cope with climate change, to accomplish energy transformation and upgrading or even sustainable development, we should not only rely on reducing human activities, but give more support to countries with low development levels in realizing sustainable development. [ABSTRACT FROM AUTHOR]

Given global warming, which limits the use of classical energy sources, renewables can provide a solution to the dilemma between environmental protection and sustainable economic growth. In this complex and changing context, green hydrogen can become a promising link between renewable energy sources and end users. However, although hydrogen has a high gravitational energy density, it has a very low volumetric energy density. This challenge requires hydrogen compression at several stages in the supply chain from electrolysis units to conversion, storage, and distribution. Recently, many studies have focused on hydrogen compression technologies. This paper provides an overview of recent advances in large-scale hydrogen compression. First, the role of hydrogen compression in providing clean energy for the future is explored. Then the thermodynamic concept of hydrogen compression is investigated. Gaining a proper understanding of compressor operating conditions in various operations in the large hydrogen industry is the next focus of this paper. Later, the capabilities and limitations of available mechanical compressors for the hydrogen industry, including reciprocation and centrifugal, are summarized. Finally, research gap and recommended new areas in this field are recognized. The presented insightful concepts provide students, experts, researchers, and decision-making working on large-scale hydrogen industry with the state of the art in hydrogen compressors industry. • Green hydrogen is a promising link between production and use of renewables. • Low molecular weight of hydrogen makes compression a crucial step in the green hydrogen chain. • Various operations in this industry need compressors with output pressures of 20 bar–200 bar. • Only reciprocating and centrifugal compressors can handle the required capacity in this industry. • Review of resources proves rapid progress in the design and reliability of hydrogen compressors. [ABSTRACT FROM AUTHOR]

Design of hybrid Nano-Grid system (HNGS) necessitates a careful thought to benchmark reliable and cost effective solutions for remote areas. Optimal sizing of HNGS using Honey Badger Algorithm (HBA) for futuristic residential area in Mahendragarh, Haryana, India is presented in this paper. The HNGS comprise combination of solar panels, wind turbines, storage batteries, diesel generator, inverter and residential load components. The primary objective functions considered in this paper are Cost of Electricity (COE) and Net Present Cost (NPC), in continuation these problems are stated as multi objective optimization issues. Numerous permutations of diverse resources were examined to assess parameters such as NPC, COE, battery storage, land utilization, emission and potential employment opportunities. HBA is almost independent of traps in the local minimum, therefore the results obtained are superior as compared with Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Biogeography Basic Optimization (BBO), Improved Artificial Ecosystem Optimization (IAEO) and Grey Wolf Optimization (GWO) as well as HOMER software, in order to determine the quality of solution the proposed HBA algorithm has obtained. HNGS system can be readily and efficiently optimized using the suggested HBA algorithm a detailed sensitivity analysis is done to better understand the system behavior for a wider region use. • A well optimized HNGS design is cost-effective, highly reliable and simple system for remote areas. • An optimization problem is formulated and solved by means of Honey Badger algorithm. • The optimization aim is to find HNGS size in terms of number of individual sources which supplies demand successfully. • Outcomes show that HBA effectively optimizes HNGS by lowering the NPC and CoE, ensuring the electricity supply. • The HBA's results has been compared to GA, PSO, BBO, IAEO, and GWO, as well as HOMER software. • Sensitivity analysis has been used to explore the impact of weather and component parameters on COE and NPC. [ABSTRACT FROM AUTHOR]

• Classified sales channels for different quality renewable energy. • Dynamic assessment indicators for the renewable energy's power deviation. • Power curve optimization strategy considers the self-owned battery. • Accurately and timely transmit the peak shaving pressure. • Guarantee the independent decision-making power of new energy stations. By the end of 2023, the installed capacity of renewable energy (RE) in China accounted for 36.0% of the total installed capacity, while the installed capacity of conventional thermal power units had decreased from 64.0% in 2016 to 47.6% in 2023. RE accounts for a higher proportion, leading to a shortage of peak shaving resources (PSR). As a result, the current RE quota system becomes unsustainable. In this paper, RE stations can classify their electricity into high-quality and low-quality parts based on the accuracy of their power curves. High-quality RE will be fully purchased and under stricter assessment, while low-quality RE will compete for clearing in the intraday spot market. Firstly, the article estimates the degree of PSR shortages in different periods based on technical parameters of thermal units, RE forecast information, and load forecast information. Consequently, the PSR supply capacity (PSR supply capacity) can be divided into PSR shortage status and sufficient status. Secondly, a clearing method for low-quality RE in the spot market is designed. The grid can set different PSR supply capacitys for different time periods according to the degree of PSR shortage. The assessment indicator values vary under different PSR supply capacitys. Lastly, based on the classification sales channels, this paper proposes a power curve optimization strategy that considers self-owned battery energy storage (BES). Case studies show that the proposed classification sales channels can effectively decrease the degree of PSR shortage while taking into account the benefits of RE station. The designed PSR supply capacity dividing method can accurately reflect the degree of PSR shortage in real-time, and the proposed power curve optimization strategy can further enhance the economic benefits of RE station. © 2017 Elsevier Inc. All rights reserved. [ABSTRACT FROM AUTHOR]

The study presents a novel integrated three-compartment electrochemical continuous electrodeionization reactor that was constructed in a laboratory environment. In order to extract large amounts of carbon dioxide from naturally occurring oceanwater in the form of bicarbonate and carbonate, it develops a innovative electrolytic cation exchange process. At the same time, it produces hydrogen gas for possible hydrocarbon synthesis. The study employs the Box-Behnken experimental design approach implemented through the Design Expert software to investigate and optimize the performance of electrochemical hydrogen extraction from Ocean water from an integrated reactor. The integrated electrochemical continuous-type electrodeionization reactor comprises two cation-permeable membranes that operate as boundaries between three compartments: a central compartment and electrode compartments that house the cathode and anode, each of which may reverse polarity. These membranes are made of gel polystyrene cross-linked with divinylbenzene, which has acidic properties that allow cation transport while inhibiting anions. The integrated reactor's electrode chambers are enclosed in plexiglass end plates and contain distinct Plexiglass electrode compartments. These compartments have mesh and solid steel anode and cathode electrodes, with an electrode active area of 176.71 cm2. The influence of various factors, such as voltage and electrolyte amount, on the production of hydrogen synthesis is examined. The study results demonstrate a maximum hydrogen production rate of 2.2 mg/min and a hydrogen production efficiency of 7.82%. The lab testing was carried out using experimental equipment to determine viability. The tests included 35-min runs that measured hydrogen generation under various parameters, such as applied voltage, electrolyte concentration, and pH levels. The ocean salt solutions of 0.5M, 1M, and 2M were initially prepared and evaluated for hydrogen generation. Each concentration is assessed at a voltage range of 4–15V, with matching solution pH values ranging from 2 to 7. Optimization studies were conducted to enhance the hydrogen production rate. The results indicate that hydrogen production rises proportionally with applied voltage and electrolyte concentration but falls with pH growth. Within the Design Expert software, the statistical methods for response surface analysis and optimization are utilized accordingly. • The paper develops an integrated three-compartment system for hydrogen production. • The paper investigates the system overall efficiencies for assessment. • It discusses how varying voltage and concentration affects hydrogen production. [ABSTRACT FROM AUTHOR]

As stated in Sustainable Development Goals number 6 and 13, clean water and sanitation and energy-related carbon emissions as climate action issues have emerged as serious issues within the United Nations. Around 150 countries rely on seawater desalination plants as their water resource. Reverse osmosis membrane technology is the most widely used seawater desalination technology for water supply. Taking water resources, developing renewable energy, and recycling resources have become the United Nations' core sustainable development goal. Therefore, this paper aims to provide an overview of renewable energy in reverse osmosis, especially newly developed renewable energy such as wave power. This paper includes technical issues, environment, and economic impact. In addition, compared with other energy sources, photovoltaic and hydropower energy utilization leads to a lower carbon footprint. Both energy produce a carbon footprint of around 0.08 kg CO 2 eq/m3. Control systems and energy storage management are the challenges in developing integrated renewable energy with reverse osmosis. Suitable pretreatment and the effect of direct use of renewable energy on the reverse osmosis process, especially on membrane and pump lifetime, should also be considered in future studies. [Display omitted] • Fluctuations and intermittence in wind and PV would affect on the process performance. • Energy storage management helps to keep the system stable • Water storage can assist in having enough water and store extra • PV and hydropower energy produce carbon footprint around 0.08 kg CO 2 eq/m3. [ABSTRACT FROM AUTHOR]

The energy sector prioritizes innovative clean energy production. This research explores a versatile hybrid solar-biomass trigeneration system, integrating organic Rankine cycle (ORC), a heat pump, and a proton exchange membrane electrolyser. Sustainable and adaptable, it produces electricity, heating, and hydrogen for Indian paper and pulp industries. The study assesses the system's thermodynamic, economic, and environmental feasibility. Initially, parametric analysis and first layer multi-objective optimization (MOO) are performed to select the efficient working fluid and operating temperatures. Benzene outperforms other fluids, achieving an energy utilization ratio (EUR) of 0.27 and exergy efficiency of 75 %. A typical heat requirement of 250 kW for processing 150 kg of paper necessitates collector areas of 3500 m2 and 4500 m2 in Aurangabad and Tiruchirappalli, respectively, and biomass waste of 0.05 kg/s. The combined system performance during day time and night time operation was studied by altering the critical solar radiation, ambient temperature and biomass waste flow rate. The second layer MOO revealed an optimum EUR of 0.25 and exergy efficiency of 9 % at the lowest cost of 33 $/h for biomass waste operation. In comparison to the conventional electricity-powered system, the proposed system would reduce CO 2 emissions by 90 kg/h to 270 kg/h. [Display omitted] • Solar and biomass waste powered systems proposed for paper and pulp applications. • ORC integrated heat pump system for heating, electricity, and green H 2 generation. • Collector area and biomass flow rate are designed for daily paper output of 300 kg. • Benzene is an efficient working fluid, produced 815 kW of heat and 3 kg/h of H 2. • The recommended system reduced CO 2 emissions by 90 kg/h to 270 kg/h. [ABSTRACT FROM AUTHOR]

Growing demand for electricity due to economic development contributes to increased greenhouse gas production, especially CO 2. However, emissions can be limited by enhancing the efficiency of primary energy conversion, such as integrating geothermal energy into coal-fired power plants. Therefore, this paper proposes replacing conventional feed-water heaters with geothermal preheaters to create a hybridized system. This study was based on a numerical model validated at a selected Polish power unit. The model was subsequently calibrated for off-design conditions to facilitate partial load analysis. The obtained characteristics outperformed those of the non-hybrid unit, generating over 18 MW of electric power output. Such an improvement could potentially boost the unit's net efficiency by more than 2.6 %. This enhancement is significant as power units typically operate under part load for approximately 90 % of the time, hence the need to evaluate the performance characteristics of hybridized units in those states. Furthermore, the research outlines the potential decrease in the plant's CO 2 emission factor, with reductions reaching up to 6.5 % under off-design conditions. Based on a gap analysis of the existing literature, this paper's comprehensive partial load evaluation serves as a new addition to research on hybridized systems. • An in-depth analysis of feed-water heaters operation is performed. • Turbine performance calculations for both design and off-design states is validated. • The comprehensive study of hybridized systems integrates three major factors. • Hybrid geothermal-fossil power cycle is vital for specific CO 2 emissions reduction. [ABSTRACT FROM AUTHOR]

In recent times, the escalating global demand for sustainable and renewable energy sources has catalyzed the exploration and development of innovative technologies, among which floating photovoltaic (FPV) systems emerge as a particularly promising solution. These systems exploit solar energy by deploying PV panels on water surfaces. These systems, offer several advantages, including their independence from land use constraints, enhanced energy efficiency due to the cooling effect of water, and the potential for synergy with various energy sources. Expanding on prior literature reviews, this paper provides a focused review of the latest developments in FPV systems, cutting-edge technologies, challenges faced the FPV in marine settings, extending to an economic analysis for comprehensive feasibility assessment, and market potential from diverse angles. The primary objective is to promote additional research and applications of FPV to guarantee the safety and stability of FPV systems under challenging marine environmental conditions, aiming to enhance overall efficiency, reliability, and the widespread adoption of FPV projects, while concurrently reducing investment costs. Highlighting its importance for energy-deficient African countries, the paper underscores the significance of integrating FPV systems into the continent's energy strategies for widespread adoption, to bolster energy security and environmental sustainability across the continent. [ABSTRACT FROM AUTHOR]

The motivation of this paper is to investigate the resistance of countries' energy research and development (RD&D) expenditures to random shocks. The analysis includes the five countries (France, Germany, Japan, the United States, and the United Kingdom) that are the biggest investors in RD&D in fossil fuels, renewables, energy efficiency, and nuclear energy. Thus, economies will be able to take precautions against global shocks in producing sustainable energy policies. To achieve this aim, this paper uses the artificial neural network approach, which uses a distributed computing model that can store and generalize data after a learning period. Empirical results widely depend on countries and distinct energy technology policy fields. The key findings provide evidence that RD&D expenditures, except for renewables, do not tend to mean revert. The economies of Japan, Germany, and the United States should make more renewable investments to reduce the resistance of renewable energy sources to shocks and thus produce policies for both environmental sustainability and energy security. The economies of France and the United Kingdom can ensure energy security by continuing their sustainable energy policies. • Applied SDG policies focused on energy technology RD&D are presented. • The stochastic characteristics of energy technology investments are examined. • Carbon-reducing policies are recommended for the top five economies. • Energy technologies are perused through artificial intelligence approach. [ABSTRACT FROM AUTHOR]

This paper utilizes the skill-biased technological change and routine-biased technological change hypotheses, along with the theory of firms' innovation behavior, to establish a comprehensive analytical framework. This framework aims to elucidate the mechanisms through which technological innovation, industrial evolution, and education affect the labor skill structure in China manufacturing. The empirical results that have been gathered can be succinctly described in the following manner: (1) Research and development innovation stimulates the demand for high-and low-skilled labor, and, the rising of total factor productivity reduces the demand for low-skilled labor, confirming the labor-friendly effect of product innovation and the labor-saving effect of process innovation. (2) The cyclical pattern of fluctuating demand for low-skilled labor can be attributed to the industrial concentration, driven by technological advancements. Nevertheless, the phenomenon of cyclicality has not been observed for high-skilled labor. (3) There exists a paradoxical relationship between higher education and industrial demand, wherein education and skill are mismatched. (4) There exists the SBTC in China manufacturing resulted from process innovation. However, the SBTC does not explain the cause or mechanism behind the relative productivity shift and the higher demand for educated workers. This paper examines several policy implications including R&D innovation, employment, and education. • SBTC/RBTC and firms' innovation behavior theories are incorprated in a unified framework. • R&D inputs promote the demands for high- and low-skilled labor, and rising TFP reduces the demand for low-skilled labor. • Industrial concentration leads to a cyclical pattern of the demand for low-skilled labor rather than for high-skilled labor. • There exists a paradoxical relationship between higher education and skill demand. [ABSTRACT FROM AUTHOR]

[Display omitted] • Carbon emission is creating a distressing situation and requires substantial solutions. • Economic complexity and FDI reduced carbon emissions. • Green technology and Renewable energy correlated negatively with carbon emissions. • Positive shocks in ECI, FDI, GRT, and REU reduce COE. • Negative shocks in GRT and REU can lead to increased pollution in the long run. All economies are concerned about rising carbon emissions, which contribute to environmental degradation. The current paper formulates a novel framework to scrutinize the impacts of shocks in economic complexity, FDI, environmental technology, and renewable energy on carbon emission in the leading clean energy investment countries, spanning the period from 1995 to 2020. In spite of the constraint for better environmental defence and the realization of the Sustainable Development Goals (SDGs), this paper introduces an empirical approach utilizing the Panel NARDL methodology to investigate the asymmetrical connections between carbon emissions and relevant exogenous factors. Furthermore, we utilize additional techniques, namely AMG and CCEMG, to enhance the robustness of our findings. Our empirical findings reveal that positive shocks in economic complexity, FDI, environmental technology, and renewable energy reduce carbon emissions while negative shocks may result to elevated pollution levels in the long-run. However, adverse shocks in economic complexity and FDI cause increased pollution in the long run. Likewise, the short-run coefficient signs are also similar to the long-run coefficient signs but different in significance level and magnitude. This has paved the way for a well-designed policy for leading clean-energy investment countries should focus on structural change, FDI, technology and renewable energy consumption. [ABSTRACT FROM AUTHOR]

Energy storage is one of the hot points of research in electrical power engineering as it is essential in power systems. It can improve power system stability, shorten energy generation environmental influence, enhance system efficiency, and also raise renewable energy source penetrations. This paper presents a comprehensive review of the most popular energy storage systems including electrical energy storage systems, electrochemical energy storage systems, mechanical energy storage systems, thermal energy storage systems, and chemical energy storage systems. More than 350 recognized published papers are handled to achieve this goal, and only 272 selected papers are introduced in this work. A comparison between each form of energy storage systems based on capacity, lifetime, capital cost, strength, weakness, and use in renewable energy systems is presented in a tabular form. Selected studies concerned with each type of energy storage system have been discussed considering challenges, energy storage devices, limitations, contribution, and the objective of each study. The integration between hybrid energy storage systems is also presented taking into account the most popular types. Hybrid energy storage system challenges and solutions introduced by published research are summarized and analyzed. A selection criteria for energy storage systems is presented to support the decision-makers in selecting the most appropriate energy storage device for their application. For enormous scale power and highly energetic storage applications, such as bulk energy, auxiliary, and transmission infrastructure services, pumped hydro storage and compressed air energy storage are currently suitable. Battery, flywheel energy storage, super capacitor, and superconducting magnetic energy storage are technically feasible for use in distribution networks. With an energy density of 620 kWh/m3, Li-ion batteries appear to be highly capable technologies for enhanced energy storage implementation in the built environment. Nonetheless, lead-acid batteries continue to offer the finest balance between price and performance because Li-ion batteries are still somewhat costly. The applications of energy storage systems have been reviewed in the last section of this paper including general applications, energy utility applications, renewable energy utilization, buildings and communities, and transportation. Finally, recent developments in energy storage systems and some associated research avenues have been discussed. Academics and engineers interested in energy storage strategies might refer to this review. • The complexity of the review is based on the analysis of 250+ Information resources. • Various types of energy storage systems are included in the review. • Technical solutions are associated with process challenges, such as the integration of energy storage systems. • Various application domains are considered. [ABSTRACT FROM AUTHOR]

Despite their economic success, the BRICS countries have yet to achieve environmental sustainability. On the other hand, these countries will not be able to maintain their economic expansion if they do not protect the natural environment. In this regard, this paper intends to assess the effects of financial integration (globalization) on ecological footprint. The paper also considers other ecological footprint drivers, including economic expansion, urbanization, renewable energy and technological innovation. The research utilizes a dataset spanning from 1990 to 2018. The study employed the method of moments quantile regression (MMQR) approach, which is robust to cross-sectional dependence and slope homogeneity issues. The outcomes from the MMQR disclose that the effect of financial globalization on ecological footprint is positive across all quantiles (0.1–0.90), thus validating the pollution haven hypothesis (PHH) in the BRICS nations. Furthermore, both renewable energy and technological innovation curb ecological footprint across all quantiles (0.1–0.90). Moreover, technological innovation is proven to impact the environment positively across all quantiles (0.1–0.90) via the path of urbanization. As a result, technological innovation is projected to help the BRICS nations achieve sustainable urbanization. The DOLS, FMOLS, FE-OLS outcomes also validate the outcomes of MMQR. Based on these results, policies were proposed. • MMQR applied to integrate asymmetric effects. • Renewable energy consumption and technological innovation derive ecological sustainability. • Financial integration-led Pollution-haven-hypothesis is confirmed. • Economic growth and urbanization lead to higher ecological footprints. • Technology innovation neutralizes the negative impact of urbanization on ecological sustainability. [ABSTRACT FROM AUTHOR]

This paper uses panel data on renewable energy in China. Thus, the current analysis fills the gaps by examining the relationship between green technology innovation and renewable energy and CO 2 emissions from 1990 to 2018. The current study examines all concerns connected to panel data analysis with advanced panel estimators, such as cross-sectional dependence, stationarity, variation in slope parameters, and structural break. Our findings show that test results reveal that green technology innovation and renewable energy have a negative and considerable influence on CO2 emissions in the long run. Moreover, the short-run relationship of green technology innovation, on the other hand, is not significant—as evidenced by the findings of robustness tests such as AMG and CCEMG. Other empirical results revealed that GTI, REN and NEN significantly reduced local CO 2 emission, while POP and PI had no obvious reduction effects on CO 2 emissions. Different GTIs had the same spatial "symbiotic effects" on CO 2 emission reduction in the short term, showing positive spatial spillover reduction effects. Lastly, we conclude that the use of green technology innovation has positive externalities. Some policies to assist green innovation technologies and renewable energy resources have been suggested for the Chinese government to enact. • This paper uses panel data on renewable energy in China. • The current study examines all concerns connected to panel data analysis with advanced panel estimators. • The short-run relationship of green technology innovation is not significant. • We conclude that the use of green technology innovation has positive externalities. [ABSTRACT FROM AUTHOR]