Search

Pumped thermal energy storage (PTES) technology offers numerous advantages as a novel form of physical energy storage. However, there needs to be a more dynamic analysis of PTES systems. This paper proposes a dynamic simulation model of the PTES system using a multi-physics domain modeling method to investigate the dynamic response of key system parameters during the system's start-up and variable operating conditions. Additionally, the impact of equipment parameters on system characteristics was analyzed. Furthermore, a comparative analysis was conducted to assess the variation in system characteristics when considering the different working medium properties. The results show that the system cavity volume should be selected as 5 m3, and the initial pressure of the system during the charge/discharge period should be selected as 2.1 MPa and 3.8 MPa, respectively. The system runs to the design operating conditions during the start-up process in about 1400 s. In the process of variable operation conditions, the power load in the charge/discharge period can be increased or reduced from the rated value by gas filling or venting, and the system characteristics change accordingly. The simulation model and research findings will offer theoretical insights for optimizing the design of the PTES system. • A dynamic simulation physical model of the PTES system was proposed. • The dynamic changes in system characteristics were analyzed. • The TES tank's thermal inertia and heat management of the PTES system were analyzed. • The effects of main equipment parameters on system characteristics were analyzed. • System characteristics were compared when using different gas properties. [ABSTRACT FROM AUTHOR]

Intelligent design and operation optimization allow energy systems to take advantage of the flexibility that multi-generation provides. This study proposes a basic solar-driven system integrated with thermal energy storage for round-the-clock energy harvesting. A modified configuration is then designed incorporating innovative multi-heat recovery approaches to increase the capacity and product diversity of the basic system. The modified system is able to cover vital urban utilities such as electricity, fresh water, cooling, and hydrogen throughout the day. To overcome the time-consuming procedure of dynamic techno-economic simulation as well as the limitation of commercial engineering equation solvers for tri-objective optimization, a deep learning approach is developed to reduce the computational complexity and improve the analysis accuracy. In this regard, the trained neural networks play an intermediary role in coupling the developed code with the MATLAB optimization toolbox. A comparison between the modified and conventional configurations indicates that implementing the multi-heat recovery approach results in a 29% increase in power generation while only increasing the overall system cost by 1.97%. From an economic perspective, the Sankey diagram depicts that the storage unit with a cost rate of 12.25 $/h accounts for 6.77% of the plant's cost rate, which enables the system to operate continuously. According to the sensitivity analysis and contour plots, the number of collectors significantly affects the total cost rate and fresh water production capacity while it has no tangible effect on the exergy efficiency. • A novel multigeneration system with thermal energy storage is designed. • A modified configuration with heat recovery is introduced to boost the capacity. • The comparative study indicates a 17.6% improvement in the power generation. • A dynamic simulation code is developed based on meteorological data. • A deep learning techno-economic optimization is applied to the system. [ABSTRACT FROM AUTHOR]

• An innovative slim decentralised plug-and-play tank is proposed for DHW production. • Model calibration is performed by experimental data in charge/discharge process. • Retrofit solution cuts required annual energy in half of which 82% is RES quota. • Optimised charging scheme reduces the total annual electrical energy by 5.2 %. • A degree increment in draw-off temperature increases annual CO 2 emission by 103 kg. The present study deals with a multi-objective analysis of an innovative decentralised system to produce and store domestic hot water (DHW), emphasising on the combined effects of the technological aspect, control strategy and user's behaviour. The proposed system, by relying on thermal energy storage, decouples energy production and demand while shaves peaks in the energy demand and, at the same time, provides more autonomy to users through local storages. To identify subtle interactions in components of DHW system, dynamic simulations are carried out by establishing a coupled TRNSYS-MATLAB code, calibrated and validated by experimental measurements. The energy analysis implies that the proposed system cuts the required annual electrical energy in half, of which up to 82% of needed primary energy is supplied from renewable sources, compared to previous electrical-decentralised system. The optimisation of the results through applying control strategies indicates that adopting a three-time charging scheme is advantageous in terms of providing a more stable temperature profile as well as a higher hot water temperature. Compared to an available-by-demand operation, this scheme reduces the required total annual electricity by 5.2 % and enhances total thermal loss from components up to 4.0%. Furthermore, a sensitivity analysis on the results emphasises the striking role of the user behaviour in electrical energy consumption either via draw-off temperature or adjusting the pre-defined temperature for activation of the built-in auxiliary heater. [ABSTRACT FROM AUTHOR]

The aim of the paper is to simulate multi-tank storage with the thermocline moving from tank to tank and compare the results against single tank storage. No analysis of this nature has previously been performed. The results lend added impetus to developing this new type of thermal energy storage, especially as heat losses through insulation have already been reduced a minimum. Dividing a seasonal thermal energy storage tank into smaller tanks reduces the negative effect of heat transfer through the thermocline. The work is a continuation of the concept already proposed in available literature of using multiple solar energy stores, but we focus mainly on developing a dynamic model of a system of this type and presenting the results of a time and thermocline dependent simulation. The study also encompassed examination of the thickness of thermal insulation of the storage tanks, with definitions of its critical size. Our study revealed that the use of multi-tank thermal energy storage reduces heat loss through the thermocline. This is illustrated mainly by changes in water temperature in the upper part of the tank, which fluctuates across a much smaller range than for a single tank. In the single tank system, the temperature drops below 60 °C, whereas for the multi-tank system it always remains above 64 °C. In addition, in the multi-tank solution the loss caused by the thermocline occurs in only one tank, leaving 3/4 of the storage system unaffected by thermocline loss. • The concept of multi tank seasonal thermal energy storage is examined. • The examination is based on the dynamic modeling. • Results are compared with the single tank thermal energy storage systems. • The examined system is more efficient due thermocline losses limitation. [ABSTRACT FROM AUTHOR]