Search

Pumped thermal energy storage (PTES) technology offers numerous advantages as a novel form of physical energy storage. However, there needs to be a more dynamic analysis of PTES systems. This paper proposes a dynamic simulation model of the PTES system using a multi-physics domain modeling method to investigate the dynamic response of key system parameters during the system's start-up and variable operating conditions. Additionally, the impact of equipment parameters on system characteristics was analyzed. Furthermore, a comparative analysis was conducted to assess the variation in system characteristics when considering the different working medium properties. The results show that the system cavity volume should be selected as 5 m3, and the initial pressure of the system during the charge/discharge period should be selected as 2.1 MPa and 3.8 MPa, respectively. The system runs to the design operating conditions during the start-up process in about 1400 s. In the process of variable operation conditions, the power load in the charge/discharge period can be increased or reduced from the rated value by gas filling or venting, and the system characteristics change accordingly. The simulation model and research findings will offer theoretical insights for optimizing the design of the PTES system. • A dynamic simulation physical model of the PTES system was proposed. • The dynamic changes in system characteristics were analyzed. • The TES tank's thermal inertia and heat management of the PTES system were analyzed. • The effects of main equipment parameters on system characteristics were analyzed. • System characteristics were compared when using different gas properties. [ABSTRACT FROM AUTHOR]

The necessary integration of renewable based technologies in the current energy systems is leading to a faster development of energy storage technologies. As widely known, renewables suffer for unpredictability, and their massive utilization is significantly affecting grid stability and management. In this framework, the development of efficient and large electrical storage systems is becoming a pivotal point to achieve a stable electrical network based on renewables. This paper proposes a novel approach to reduce the energy excesses exported to the grid by a residential user equipped with a100 kW solar photovoltaic field. In particular, the electricity is stored as hydrogen by means of a 50 kW reversible solid oxide fuel cell. A comprehensive energy and economic simulation model of the system is proposed. In particular, a model of the reversible solid oxide fuel cell is developed in MatLab® and then integrated in TRNSYS17 for dynamic simulation purpose. Results showed that using the plant waste heat is crucial for improving fuel cell efficiency and plant energy performance. The proposed system achieves a reduction of the primary energy consumption by 74%. However, the proposed plant exhibits a poor economic profitability, with a payback period of 15 years. • Novel paradigm for residential electric energy storage based on hydrogen technology. • Hydrogen as electric energy storage system is able to shave the peak of power demand and production. • Very profitable energy and environmental results are achieved. • The high capital cost of hydrogen related technologies limits the economic profitably of such plants. [ABSTRACT FROM AUTHOR]