Search

Arsenic (As) is among the most dangerous metalloids and is harmful to human wellbeing. In this laboratory study, Al(III)-modified kapok fibres (Al-Kapok) were used to remove As(V) from water. The sorbent was characterised using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDX). Batch experiments were performed to observe the performance of Al-Kapok in the removal of As(V) and to examine the effects of pH, temperature, adsorbent dose, and coexisting ions on the adsorption process. The surface of the sorbent changed after aluminium modification, and the results of the batch experiments showed that the adsorption of As(V) occurred mainly via endothermic-spontaneous chemisorption at the solution and solid interface of Al-Kapok. The As(V) removal efficiency was approximately 76%–84%, and it was slightly affected at pH levels below 8.0. Further study showed that the maximum adsorption capacity of Al-Kapok for As(V) was 118 μg/g at 30 °C and pH 6, and notable adverse effects were caused by the presence of SO 4 2 − and PO 4 3 − . It was also found that the boundary layer and film diffusion contributed more to As(V) adsorption. After five adsorption/desorption cycles, regeneration recovered approximately 92% of the adsorption capacity of Al-Kapok used. Overall, Al-Kapok appears to be a suitable adsorbent material for the purification of As-contaminated water. [Display omitted] • The adsorption of As(V) on the Al-Kapok is slightly affected by pH at pHs below 8.0 • As(V) adsorption is mainly a chemical process and inhibited by multi-valent anions. • Boundary layer and film diffusion shows more contribution to the adsorption of As(V). • 92% of the Al-Kapok's adsorption capacity could be recovered through regeneration. [ABSTRACT FROM AUTHOR]

Food waste and waste paper are the two largest components of municipal solid waste, and many previous studies found that their co-digestion improved methane yield. This study investigated the anaerobic co-digestion of 0–100% food waste with paper food packages on lab-scale with feedstock-to-inoculum (F/I) ratios from 0.5 to 6 (based on volatile solids, VS) and total solids contents from 8% to 28%. In addition to methane yield, volumetric productivity and process economics were also used to evaluate the operating parameters. Results showed that the highest cumulative methane yield of around 530 L/kg-VS feed was obtained from 100% food waste at F/I ratios of 0.5, 1, and 2; the highest volumetric methane productivity of 44.2 L/L work was achieved with 25% food waste at an F/I ratio of 6; and the highest annual net profit was obtained from 75% food waste at an F/I ratio of 2, which also achieved the highest internal rate of return (20.7%) and the shortest payback period (5 years). Addition of waste paper packages to food waste could enhance the digester stability, and it is beneficial to allow certain amount of paper packages and tissues to be collected together with food waste during the initial source separation. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • Metal polymeric composites based on pyrimidine-functionalized COFs (covalent organic frameworks) were fabricated. • Fe@COF-Pyr composite possesses good catalytic performance for oxygen evolution reaction. • Au-Pd@COF-Pyr can promote methane oxidation. Functionalized covalent organic frameworks (COFs) materials are used in various fields due to their unique properties. Herein, the reported pyrimidine-functionalized COFs sample named COF-Pyr is selected as the matrix to provide two COFs-based metal composites Fe@COF-Pyr and Au-Pd@COF-Pyr, which are respectively synthesized through metal coordination and in situ reduction reaction. On the one hand, Fe@COF-Pyr used as the electrocatalyst exhibits a good oxygen evolution reaction activity with the overpotential of only 430 mV at a current density of 10 mA cm−2 in the KOH solution (1 M) electrolyte. It is attributed to the large specific surface area (427 m2/g) and abundant catalytic sites of Fe@COF-Pyr, which help to improve the electrochemical performance. On the other hand, Au-Pd@COF-Pyr is an excellent catalyst for methane conversion that the products of the methane oxidation reaction can be obtained under mild reaction conditions. This work not only provides a newfangled notion for the design and preparation of COFs-based metal composites but also broadens the practical application of COFs materials in the domain of catalysis. [ABSTRACT FROM AUTHOR]

[Display omitted] • A new fluorescent covalent organic frameworks was synthesized. • N , O -bidentate ligation was be used to combine difluoroboron. • 50% B-COF exhibited red fluorescence under ultraviolet excitation. The multi-dentate chelate ligands containing N and O atoms have good chelating ability to boron trifluoride and their complexes show good fluorescence properties. In this work, a fluorescent covalent organic framework (COF) with good crystallinity and porosity, 50% B-COF, was successfully synthesized by coordination of starting COFs 50% COF-OH with boron trifluoride diethyl etherate via N, O-bidentate ligation. Imine bonds are highly polarized. The coordination of nitrogen and boron changes the electron cloud distribution of imine bonds, causing the non-fluorescent 50% COF-OH to be transformed into fluorescent 50% B-COF. 50% B-COF exhibited red fluorescence under ultraviolet excitation. This work provides a new strategy for the design of fluorescent COFs. [ABSTRACT FROM AUTHOR]