Search

Submarine fan reservoirs are important accumulation zones for oil, gas, and natural gas hydrates, offering significant potential for hydrocarbon exploration. During the deposition period of the Sanya Formation in the southern part of the Changchang Sag of the Qiongdongnan Basin, a large submarine fan developed. However, the internal structure, source-sink system, and formation mechanism of this fan remain poorly understood, posing significant challenges to exploration in this area. This paper examines the source-to-sink sedimentary processes and deposition of submarine fans, using the Changchang Sag, in the Qiongdongnan Basin in the Northern South China Sea, as an example, which will provide valuable general guidance for deep water oil and gas exploration. Based on the theories of seismic stratigraphy and seismic sedimentology, this paper utilizes techniques such as seismic facies analysis, seismic attribute optimization, paleogeomorphology reconstruction, and source-to-sink sedimentary systemanalysis to analyze the 3D seismic data of the study area. Research indicates that the Sanya Formation in the Changchang Sag of the Qiongdongnan Basin comprises three depositional units: submarine fan, feeder channel, and Semi-deep marine to deep marine mudstone. The submarine fan is a fan formed by the coupling and convergence of submarine fans sourced from the southwest and southeast. Internally, it is divided into three sub-facies: the proximal fan of the sand-rich submarine fan, the main body of the sand-rich submarine fan lobes, and the distal lobes of the sand-rich submarine fan. The submarine fan sourced from the southwest extends nearly north-south and is primarily fed by sediment transported through three large, banded ancient valleys. The sedimentary filling is characterized by three-phase progradation. The submarine fan sourced from the southeast extends nearly east-west and is primarily fed by sediment transported through a single large, banded ancient valley. The sedimentary filling is characterized by two-phase lateral accumulation. During the deposition period of the Sanya Formation, certain areas of the southern uplift belt were exposed for extended periods and subjected to weathering and erosion. Sediments are transported to large ancient valleys through small supply channels. A large number of sediments were transported to the southern slope of the Changchang sag through the provenance channel system such as large ancient valleys and slope belts and deposited in the center of the sag. These make up a complete system of large ancient uplifts and submarine fan source-to-sink sedimentary systems. The sedimentary model is a lobed submarine fan controlled by semi-restricted ancient valleys and expansive basins. [ABSTRACT FROM AUTHOR]

Structural fracture distribution is essential in oil and gas transportation and development in passive continental margin basins. In this paper, taking as an example the clastic reservoirs in the A-Basin, a passive continental margin in northeastern South America, the paleotectonic stress field of the Late Cretaceous Maastrichtian formation in Basin A was numerically simulated by finite element technique through the integrated interpretation of seismic total data, logging data and core data, and the distribution of tectonic fractures was later predicted based on rock fracture criterion. The results of the study show that: (1) The distribution of tectonic stress and fractures during the Late Cretaceous Maastrichtian formation of Basin A is affected by the fracture zone, mechanical properties of rocks and tectonic stress, regions with extensive fracture development are susceptible to stress concentrations, resulting in significant stress gradients. (2) The development of structural fractures in the study area was predicted using the Griffiths criterion, and the tensile rupture coefficient T was introduced to quantitatively characterise the intensity of fracture development, with larger values reflecting a higher degree of fracture development. The well-developed and relatively well-developed fractures are mainly located in the fracture zones and the interior of submarine fans. (3) Fracture zones and sedimentary phases mainly control structural fractures in Basin A; within 5 km outside the fracture zones, the development of fractures is controlled by the fracture zones, beyond which the regional tectonic stress field controls them; inside the sedimentary fan, the development of fractures is controlled by the sedimentary subphase, which decreases in the order of the upper fan, the middle fan, and the lower fan; inside the subphase, they are controlled by the regional tectonic stress field, and the fractures show the increasing trend in the direction of NW-NE. [ABSTRACT FROM AUTHOR]

Inherited rift topography controls the sediment routing, timing of sand supply, and sedimentary linkage of early post‐rift depocentres. Exhumed examples of early post‐rift turbidite systems are rare and previous studies have examined the evolution of individual depocentres; in contrast, the detailed evolution of early post‐rift turbidite systems across multiple depocentres has never been documented. Current fill‐and‐spill models do not detail the stratigraphic architecture and evolution of sedimentological characteristics of multiple intraslope fans developed across topography, including bed type distributions. Here, the evolution of three intraslope fans that developed across two early post‐rift depocentres is documented along an 18 km long transect in the southern Neuquén Basin, Argentina. The relative chronology of sand supply in depocentres is constrained with new U–Pb ages, and sediment source areas with provenance analysis. The early post‐rift intraslope fans record progradation of the system and progressive sedimentary linkage of post‐rift depocentres, transverse to local syn‐rift structures, with sediment routing subparallel to the cratonic basin margin. The large‐scale stratigraphic architecture of intraslope fans indicates an evolution as a fill‐and‐spill system, with initial confinement through flow stripping and overspill to spillover with erosion and bypass across a transverse topographic high separating the depocentres. Changes in early post‐rift intraslope fan characteristics, including thickness, sandstone content, lobe complex stacking patterns, stratal termination patterns and bed type distribution, record changing confinement through time within a depocentre, and spatially across depocentres. The strong spatial and vertical stratigraphic variability of transitional flow deposits and hybrid event beds reflects enhanced erosion, sediment bypass and flow transformation across transverse relief between the two depocentres during the spillover phase. These findings advance current understanding of early post‐rift turbidite systems and refine fill‐and‐spill models, which will help the prediction of spatial and vertical changes in rock quality and connectivity in subsurface hydrocarbon reservoirs and CO2 storage sites. [ABSTRACT FROM AUTHOR]

Large rivers are characterized by large water discharges, high suspended sediment fluxes and low slope, and typically display multiple channels that are separated by large complex bars. The most common channel style found in these rivers is characterized by the alternating presence of single and multiple channel threads. Mid‐channel compound bars separate a main deeper channel from shallower secondary channels, leading to low‐order braiding and low to moderate sinuosity. Despite the importance of this type of river for global terrestrial sediment transport and the interpretation of ancient fluvial successions, integrated depositional models for large multi‐channel rivers are still not fully developed. This paper interprets the channel morphodynamics and depositional architecture of such large rivers by investigating the distinctive features of their laterally‐accreting mid‐channel bars in the Solimões–Amazonas River. This is achieved by examination of temporal series of satellite images, quantification of bedforms using multibeam echosounding surveys, analysis of shallow seismic and ground penetrating radar surveys of selected areas, and on‐site field observations and sample collections. Such mid‐channel bars produce directional variability in planform scroll bar accretion of up to 180°. As these bars – and their associated channels – evolve, they become progressively shallower, due to the bifurcation of the two channels and the resultant partitioning of discharge that leads to a gradual reduction in transport capacity within the outer channel. The preserved successions of this process in the alluvial plain are characterized by fining‐upward trends, with larger cross‐strata sets at mid‐depths and internal erosional surfaces marking distinct cycles of bar development with potentially differing palaeocurrent trends. The new depositional models proposed for these mid‐channel bars and channels constitute a basis for the recognition of large multi‐channel river deposits in the ancient rock record. [ABSTRACT FROM AUTHOR]

The mass flow-dominated fan delta complex is developed by the rapid deposition of coarse-grained materials in front of uplifted areas under the influence active tectonism. This is important for providing clues about the first opening stages of marine basins. The study aims to shed light on the fact that mass flow-dominated fan delta complexes play an active role in determining the characterization of tectonism controlling basin opening. In the study area, mass flow-dominated deposits of the Deliktaş Fan Delta Complex (DFDC) represent the first deposits of the southern part of the Middle Eocene Elazığ Marine Basin, whose development is controlled by normal block faults. The basin consists of the alluvial fan succession, the fan delta succession and the turbidite succession overlying both successions. DFDC is composed of fan delta facies assemblages deposited in the form of shallow water coastal prism in front of the multifeeder areas controlled by extensional tectonism. Conglomerates and sandstones predominate in the DFDC successions. The system forming the DFDC is a good example for high-energy, mass flow-dominated, multifeeder fan delta environments with different source areas surrounding the Elazığ Basin from the north and south. Sedimentological studies were carried out from 11 measured stratigraphic sections taken from the DFDC, and three different sequences were defined. These sequences contain the deposits belonging to fan delta plain and fan delta front facies assemblages. The facies architecture of the successions of the DFDC was defined based on measured stratigraphic sections, litho-correlation and field observations, and with the help of the obtained data, the sedimentation evolution of the sequences belonging to it was revealed with three-dimensional basin models. In this way, an approach to the primary geodynamics of the Elaziğ Basin was obtained. [ABSTRACT FROM AUTHOR]

The Bounty Channel is a large-scale submarine channel system located in the eastern continental margin of New Zealand. Extending along the axis of the Bounty Trough, the channel system comprises three main tributaries (C1–C3) at its head, which merge downstream into a trunk channel leading to a terminal submarine fan. In this study, we use high-quality two-dimensional multichannel seismic data to investigate the formation and evolution of tributary channels C1 and C2. Four types of seismic facies are identified in the tributary channels: fill-type, mounded divergent, wavy, and subparallel facies. These seismic facies are correspondingly interpreted as topographic depression or channel fills, levees, sediment waves, and hemipelagic deposits. The Late Miocene tributary channels were developed above a pre-existing NE–SW-oriented depression. The Pliocene to Quaternary tributary channels are characterized by preferential development of higher levees on their left hand, and the presence of sediment waves on the lower levees of their right-hand, signaling an effect of the Coriolis force. The formation and evolution of the tributaries are primarily linked to regional tectonics, including increased convergence rate between the Pacific and Australian plates along the Alpine Fault in the Late Miocene and enhanced uplift and erosion at the Southern Alps during the Pliocene. [ABSTRACT FROM AUTHOR]

The shelf‐margin deltas are the primary 'sources' of interest in siliceous submarine fan source‐to‐sink systems. However, less has yet to be discovered about the roles and effects of the shallow water platform situated on continental slopes. Using the Miocene sediments of the Ledong‐Lingshui Sag in the western part of the Qiongdongnan Basin (QDNB), this paper studies the YC35 coarse‐grained submarine fan that developed in the Meishan Formation (Fm.). The material sources, depositional characteristics, and developmental mechanisms of this fan were investigated. The restored palaeogeomorphology, based on high‐resolution 3D seismic data, shows that a shallow water platform exists. According to geochemical palaeoenvironmental data, the shallow water platform was ideal for forming carbonate deposits in the Meishan Fm., owing to the warm and humid palaeoclimate and the shifting trend in palaeowater depth. Based on the combined source tracing of heavy minerals, coherence slices, and seismic profiles, the shallow water platform and the Ningyuan River source on Hainan Island contributed to the YC35 coarse‐grained submarine fan. Compared to submarine fans formed during different periods, coarse‐grained fan stands out due to its distinct sedimentary structure, rock composition, and microlithological characteristics. Aside from not following the usual Bowmar sequence, there is an excess of gravel and no clear bedding or lamination. A large number of rock fragments, mostly granite and sedimentary rock (carbonatite), make up the rock composition. According to these results, the shallow water platform significantly affects submarine fan material composition. In addition, the attribute slice based on the root mean square reveals that shallow water platforms moderate peripheral deposition. We attribute the development and proximal supply of the shallow water platform to diapirism and forced regression. Our research provides novel insights and comprehension into the investigation of submarine fan sedimentary systems. [ABSTRACT FROM AUTHOR]

Source‐to‐sink dynamics are subjected to complex interactions between erosion, sediment transfer and deposition, particularly in an evolving tectonic and climatic setting. Here we use stratigraphic forward modelling (SFM) to predict the basin‐fill architecture of a multi‐source‐to‐sink system based on a state‐of‐the‐art numerical approach. The modelling processes consider key source‐to‐sink parameters such as water discharge, sediment load and grain size to simulate various sedimentary processes and transport mechanisms reflecting the dynamic interplay between erosion in the catchment area, subsidence, deposition and filling of the basin. The Cenozoic succession along the SW Barents Shelf margin provides a key area to examine controls on source‐to‐sink systems along a transform margin that developed during the opening of the North Atlantic when Greenland and Eurasian plates were separated (ca. 55 Ma onwards). Moreover, the gradual cooling which culminated in major glaciations in the northern hemisphere during the Quaternary (ca. 2.7 Ma), has affected the spatio‐temporal evolution of the sediment routing along the western Barents Shelf margin. This study aims to characterize the relative importance of different source areas within the source‐to‐sink framework through SFM. In the early Eocene, the SW Barents Shelf experienced a relatively equal sediment delivery from three principal source areas: (i) Greenland to the north, (ii) the Stappen High to the east, representing a local source terrain, and (iii) a major southern source (Fennoscandia). In the middle Eocene, our best‐fit modelling scenario suggests that the northern and the local eastern sources dominated over the southern source, collectively supplying large amounts of sand into the basin as evidenced by the submarine fans in Sørvestsnaget Basin. In the Oligocene (ca. 33 Ma) and Miocene (ca. 23 Ma), significant amounts of sediments were sourced from the east due to shelf‐wide uplift. Finally, this study highlights the dynamic nature and controls of sediment transfer in multi‐source‐to‐sink systems and demonstrates the potential of SFM to unravel tectonic and climatic signals in the stratigraphic record. [ABSTRACT FROM AUTHOR]

The Green River Formation of Wyoming, USA, is host to the world's largest known lacustrine sodium carbonate deposits, which accumulated in a closed basin during the early Eocene greenhouse. Alkaline brines are hypothesized to have been delivered to ancient Gosiute Lake by the Aspen paleoriver that flowed from the Colorado Mineral Belt. To precisely trace fluvial provenance in the resulting deposits, we conducted X-ray fluorescence analyses and petrographic studies across a suite of well-dated sandstone marker beds of the Wilkins Peak Member of the Green River Formation. Principal component analysis reveals strong correlation among elemental abundances, grain composition, and sedimentary lithofacies. To isolate a detrital signal, elements least affected by authigenic minerals, weathering, and other processes were included in a principal component analysis, the results of which are consistent with petrographic sandstone modes and detrital zircon chronofacies of the basin. Sandstone marker beds formed during eccentricity-paced lacustrine lowstands and record the migration of fluvial distributary channel networks from multiple catchments around a migrating depocenter, including two major paleorivers. The depositional topography of these convergent fluvial fans would have inversely defined bathymetric lows during subsequent phases of lacustrine inundation, locations where trona could accumulate below a thermocline. Provenance mapping verifies fluvial connectivity to the Aspen paleoriver and to sources of alkalinity in the Colorado Mineral Belt across Wilkins Peak Member deposition, and shows that the greatest volumes of sediment were delivered from the Aspen paleoriver during deposition of marker beds A, B, D, and I, each of which were deposited coincident with prominent "hyperthermal" isotopic excursions documented in oceanic cores. [ABSTRACT FROM AUTHOR]

Outburst floods from glacial Lake Missoula largely explain erosion of the Channeled Scabland, a system of overfit, basaltic channels in Washington, northwestern United States. However, it is challenging to explain Missoula flood routing into Moses Coulee due to its topographic isolation from flood routes. To clarify flood pathways into Moses Coulee, we mapped channels that delineate a radial-anastomosing network connecting to Moses Coulee. Channels consist of coulee-like features eroded mainly in basalt. Channels climb adverse slopes and cross divides, and the network is draped with eskers and recessional moraines. These channel geometries and glacial landform associations suggest a tunnel channel network. Large channel dimensions and network anastomosis indicate formation in subglacial floods. The network connects to Moses Coulee with sufficient cross-sectional area to convey megafloods, hinting that subglacial floods may have been a significant source of Moses Coulee meltwater, in addition to possible diverted Missoula floods. [ABSTRACT FROM AUTHOR]

Turbidity currents are sediment-laden gravity currents that transfer sediments to deep sea and lake floors through erosion and deposition. These deposits form subaqueous fans in deep marine environments and can reduce reservoir storage capacity, complicating management. Deep sea deposits often contain hydrocarbons like oil and gas. Field measurements of turbidity currents are challenging due to the risk of damage to measuring instruments, and laboratory experiments do not accurately simulate these currents. Thus, numerical modeling is crucial for understanding their formation and properties, and for locating oil and gas fields within deep sea turbidites.A 3D two-phase numerical model (water and solids) is used to simulate underflow turbidity currents. This model solves the Reynolds-Averaged Navier-Stokes equations and uses the Eulerian approach, with turbulence closure achieved by the RNG k-ε model. It simulates both continuous unconfined currents and surge-like confined currents. Calibration and validation against experimental data show the model accurately replicates key features of turbidity currents.Model results indicate that fine particles remain suspended longer, providing additional density that drives the current further with increasing downstream velocity. Vertical concentration profile shows two distinct layers: a denser, faster-moving bottom layer parallel to the bed, and a slower, more diluted upper layer affected by entrainment and mixing with ambient fluid. Turbidity currents are supercritical on sloped channels and subcritical on mild sloped unconfined seafloors or reservoir bottoms. In following article, hypothetical simulations using this model will further explore various characteristics and deposits of turbidity currents on a field scale.

A complete, fluvial stratigraphic record for the last glacial period of the Western Andes in Peru is not available due to preservation issues and spatial variability in sedimentation. Deposits are typically restricted to incomplete records of fluvial terraces or localised occurrences of alluvial fans and landslides. These landforms are thought to have formed under a regime of climate cyclicity controlling increases in precipitation. Because of the fragmented preservation of these deposits, as well as dating uncertainties, it remains unclear if orbital climate cycles, such as the precession cycle, or suborbital cycles, such as the wet Heinrich events, are driving Andean sedimentation. In this paper, we try to answer this question through a sedimentological–stratigraphical analysis of a much more complete sedimentary sequence than usually found in the region. We present the results of a grain size analysis of 5000 clasts and 13 new luminescence ages of a 52‐m‐long, stratigraphic section of the Lima fluvial fan in Peru. Bayesian age–depth modelling resulted in a robust chronostratigraphic framework and derived sedimentation rates. The stratigraphic record registered sedimentation from 121.7 ± 4 to 6.3−1.6+1.5 ka. Three major sedimentation periods occurred between 121.7 to 110−5+4, 87 ± 1 to 67−3+2, and 31−3+4 to 6.3−1.6+1.5 ka. These periods registered various unconformities and coarsening–fining upward sequences which chronologically correlate to suborbital pluvial periods, recognised from speleothems and lake records, that drove fluvial deposition. They also correlate with the timing of other recognised sedimentation events throughout the Western Andes. Marine regression resulted in fan progradation and not in incision. The Lima fan stratigraphy represents therefore the most complete, last glacial fluvial record for the Peruvian Western Andes to date and it highlights the potential of fluvial fans as recorders of suborbital climate variability. [ABSTRACT FROM AUTHOR]

This study provides new insights onto spatial and temporal trends of seafloor macro-litter in the abyssal seafloor of Sardinian channel, in central western Mediterranean (Italy). Trawl surveys were conducted at depths between 884 and 1528 m, thus focusing on one of the least investigated marine environments. None of the considered sites was litter free, with plastics being numerically dominant (57% of items), followed by metal (11%) and glass (16%). Recorded densities and weight ranged between 49.9 and 499 items km−2 and 1.4 and 1052 kg km−2. In the most contaminated sites, the weight of the litter collected in nets represented up to nine times the biomass of benthic megafauna, and, overall, in 60% of hauls macro-litter mass outweighed the biomass collected. Moreover, we report that megafauna was observed to be more abundant in sites where macro-litter presence was more severe. More studies are needed to elucidate the nature of this correlation, with biota being more abundant in hotspots of accumulation of seafloor macro-litter. [ABSTRACT FROM AUTHOR]

Submarine canyons and channels are globally important pathways for sediment, organic carbon, nutrients and pollutants to the deep sea, and they form the largest sediment accumulations on Earth. However, studying these remote submarine systems comprehensively remains a challenge. In this study, we used the only complete-coverage and repeated bathymetric surveys yet for a very large submarine system, which is the Congo Fan off West Africa. Our aim is to understand channel-modifying features such as subaqueous landslides, meander-bend evolution, knickpoints and avulsions by analyzing their morphometric characteristics. We used a new approach to identify these channel-modifying features via morphometric fingerprints, which allows a systematic and efficient search in low-resolution bathymetry data. These observations have led us to identify three morphodynamic reaches within the Congo Canyon-Channel. The upper reach of the system is characterized by landslides that can locally block the channel, storing material for extended periods and re-excavating material through a new incised channel. The middle reach of the system is dominated by the sweep and swing of meander bends, although their importance depends on the channel's age, and the time since the last up-channel avulsion. In the distal and youngest part of the system, an upstream migrating knickpoint is present, which causes multi-stage sediment transport and overspill through an underdeveloped channel with shallow depths. These findings complement previous less- detailed morphometric analyses of the Congo Canyon-Channel, offering a clearer understanding of how submarine canyon-channels can store sediment (due to channel-damming landslides, meander point bars, levee building due to overspill), re-excavate that sediment (via thalweg incision, meander propagation, knickpoint migration) and finally transport it to the deep sea. This improved understanding of the morphodynamics of the Congo Canyon- Channel may help to understand the evolution of other submarine canyon- channels, and assessment of hazards faced by seabed infrastructure such as telecommunication cables. [ABSTRACT FROM AUTHOR]

In ancient records, discrimination of specific triggering events from sediment gravity flow deposits is very difficult, due to multiple interactions between triggering events and similar sedimentary characteristics. For this study, we introduce the Hakcheon-Chogok Megaturbidite (HCM) in the Miocene Pohang-Youngduk Basin (PYB), providing an opportunity to differentiate the triggering events. This megaturbidite is over 70 m thick in the proximal part and less than 4 m thick in the distal part. The diachronous stratigraphic position and distinct coarser sediments than those of the underlying and overlying successions suggest a large-scale slope failure of the fine-grained foreset (more than 2 km3). The occurrence of exotic granitic boulders, originating from the basement rock, more than 1 km west of the present fan-apex, is indicative of extreme sea-level run-up. The dispersal pattern and paleocurrent direction suggest that the HCM flowed to the northeast, irrespective of the local depositional slope which show a radial distribution from the fan-apex. The distribution pattern almost perpendicular to the strike of the NW-SE trending transfer fault suggests that the HCM was triggered by a reflection flow of giant tsunami wave, resulting in a large-scale failure of high-gradient (> 15° in slope angle) fandelta slope. [ABSTRACT FROM AUTHOR]

Mixed grain‐size bedforms comprise alternating sand‐rich and poorly sorted mud‐rich laminae and bands. These bedforms have been identified in distal submarine settings formed underneath unidirectional flows. This study documents mixed grain‐size bedforms in a proximal submarine slope setting formed beneath both unidirectional and combined flows. Core and outcrop data with well‐constrained palaeogeographical context are used to describe two types of mixed grain‐size bedform. Type A bedforms comprise mud‐rich current ripples and low‐amplitude bed‐waves with alternating concave and planar sandstone–mudstone foresets that pass into mud‐rich troughs, and aggradational sinusoidal laminasets. Type B bedforms consist of sandstone–mudstone laminasets that comprise rounded, biconvex ripples with sigmoidal‐shaped foresets and swale and hummock‐like laminasets and banded sets. These bedforms occur in channel‐margin, internal‐levée and external‐levée, intraslope and disconnected lobe environments, and represent 27 to 63% by stratigraphic thickness of the studied successions. They are interpreted as deposits of clay‐rich transitional flows, whose depositional style is governed by the balance of cohesive and turbulent forces, and the rate of flow deceleration. Type B bedforms are further interpreted as combined transitional flow deposits, resulting from flow deflection and ponding processes by seabed topography. Upward and lateral transitions between different bedforms create distinct bedform sequences, demonstrating progressive spatio‐temporal transformations in flow properties and their topographic interactions. By using a well‐constrained palaeogeographical setting, mixed grain‐size bedforms are shown to be situated close to sites of erosion into muddy substrates, abrupt losses in confinement, and/or changes in slope gradient. These bedforms demonstrate that flow transformation and transitional flow behaviour are not restricted to distal submarine settings. Furthermore, mixed grain‐size bedforms are not a diagnostic criterion for bottom currents, because such flows cannot account for the high mud content in laminasets, or the interlamination of sand and mud. [ABSTRACT FROM AUTHOR]

Autogenic feedbacks can produce large‐scale, organized stratigraphic patterns in alluvial fans, but autogenic depositional signatures of specific upstream boundary conditions remain challenging to interpret. Here, a combination of theory, experiment and field application is used to explore how autogenic lithofacies changes can be interpreted as stratigraphic indicators of upstream boundary conditions. Six experiments were conducted to test the effects of sediment supply and water discharge rates on autogenic advance and retreat of the lithofacies boundary (grain‐size transition) in an alluvial fan with two dominant grain sizes. Migration of the grain‐size transition caused a short‐term zigzag pattern in the grain‐size transition position in the dip‐directional deposit section. For each experiment, time‐lapse images and laser topographic scans of the fan surface and stratigraphic cross‐sections of the final deposits were used to quantify characteristic timescales of autogenic processes. Timescales for fan‐margin migration, surface wet‐fraction change and grain‐size transition migration generally shorten as sediment supply rate increases and water discharge rate decreases. Increasing the sediment supply rate shortens the duration of the fluvial sediment storage and release cycle, producing higher frequency zigzags in the grain‐size transition trajectory. Increasing the water discharge tends to widen channels and lengthens the duration of the fluvial sediment storage and release cycle, constructing lower frequency zigzags in the grain‐size transition trajectory. Increasing the water discharge also enables more sediment to transport further downstream during release events, leading to higher magnitude zigzags in the grain‐size transition trajectory. These relationships between upstream boundary conditions and the grain‐size transition trajectory demonstrate how autogenic stratigraphic signals could be used as a tool to infer relative changes in boundary conditions. [ABSTRACT FROM AUTHOR]

The Early‐Middle Jurassic is one of the crucial coal‐forming geologic periods in the world and an important target for hydrocarbon exploration in the Turpan‐Hami Basin, China. The paleoenvironment and vegetation reconstruction of the Early‐Middle Jurassic have been investigated using elemental geochemistry and palynological analysis to reveal paleoclimate evolution. A total of 48 genera of pteridophyte spore and 35 genera of gymnosperm pollen were identified, and 5 palynological assemblages were longitudinally divided, which showed significant differences in geochemical behaviours. The paleoenvironment was a transition from suboxidation to anoxia and then to an oxidation environment under freshwater conditions. The paleowater in the northern Taibei Sag was deeper than that in the southern part during the Middle Jurassic, which coincided with the sedimentary background of the sublacustrine fan in the north and the shallow braided river delta in the south. The paleovegetation evolved from mixed lowland–upland forest in the Hettangian‐Toarcian, to lowland fern forest in the Aalenian‐Bajocian, to upland conifers forest in the early Bathonian, to upland Cheirolepidiaceae forest in the late Bathonian‐Callovian. The Toarcian and Bathonian‐Callovian arid climate and the Hettangian‐Pliensbachian and Aalenian‐Bajocian warm‐humid climate were responses to the continued global warming events and the intensification of the East Asian monsoon circulation, respectively. The influence of the Bathonian‐Callovian aridification event on the sedimentary response in the southern Taibei Sag will be delayed due to the gradual southward migration of the depositional centre. [ABSTRACT FROM AUTHOR]

Sequence architectures along the margins of rift basins are still poorly documented compared to passive continental margin settings. The Eocene Shahejie Formation on the rift margin of the Dongying Depression records a complex sequence stratigraphic distribution of conglomerate, sandy conglomerate, sandstone and mudstone. These facies have been mainly attributed to fan delta and marginal subaqueous fan depositional settings that developed during segmented fault activity along the rift margin. We utilize three‐dimensional (3D) seismic data, conventional cores, and wireline log data to dissect the overall wedge‐shaped upper sub‐member strata of the Shahejie Formation's fourth member. The study interval is a third‐order sequence formed between 45.4 and 42.5 Ma and contains a lowstand–transgressive systems tract (LST–TST) and a highstand systems tract–falling‐stage systems tract (HST–FSST). We found that the LST–TST developed several huge amalgamated depocenters along the Chennan border fault; whereas, these depocenters gradually diminished or even disappeared during the HST–FSST period, illustrating less significant control by the border fault. Through calculations of strata growth rates, we confirmed that the segmented activity of the border fault influences the stratigraphic distribution and facies evolution during these two periods. Specifically, deep‐water depositional systems, represented by marginal subaqueous fans were widely developed in the LST–TST period and were influenced by overall strong tectonic activity, including retrogradational (R) and aggradational (A) patterns. However, the aggradational to progradational (AP) deltas and progradational to degradational (PD) deltas dominated the generally muted tectonic activity setting during the HST–FSST. Additionally, influenced by localized segmented fault activity, these systems tracts exhibit incomplete vertical development, resulting in spatial variability in stratigraphic stacking patterns. [ABSTRACT FROM AUTHOR]

The entire compression system of DGEN380 was selected to study the degradation of aerodynamic characteristics caused by erosion of the leading edge. Numerical simulations under different degrees of leading edge erosion were performed. It was found that the leading edge erosion causes a significant decrease in operability from 70 % of the blade height to the tip, and mainly affects the subsequent flow field in the bypass. At 90 % of blade height, the isentropic efficiency and total pressure ratio of the blade with leading edge erosion are reduced compared to the origin blade. Afterwards, the thrust equation was introduced to analyze the effect of leading edge erosion on the thrust loss under different operating conditions of the aircraft. Among the three operating conditions, the thrust loss rate of the cruise condition was the largest, which provided a reference for the subsequent evaluation of the blade repair condition. [ABSTRACT FROM AUTHOR]

The lower limits of petrophysical properties for an effective reservoir are among the key parameters for assessing hydrocarbon reserves and are therefore directly related to hydrocarbon exploration and development strategies. However, the lower limits for marine sandstone gas reservoirs are still not clear and the impact factors also remain to be discussed. This study analysed the lower petrophysical property limits of an effective sandstone reservoir in the Qiongdongnan Basin using porosity, permeability and gas testing. The results showed that the lower porosity and permeability limits of effective reservoirs developed in the deltas are 8.9% and 1.2 × 10−3 μm2, respectively, and 11.3% and 4.0 × 10−3 μm2 in the submarine canyons and fans, respectively. Sedimentary facies, sediment transport distance, grain size and burial depth of sandstone significantly influence the lower physical property limits. The lower porosity and permeability limits increase with the increase in sediment transport distance as well as the decrease in sandstone grain size and burial depth. Sediment sources and sedimentary facies determine whether sandstone can become an effective reservoir in the Qiongdongnan Basin. Specifically, the sediment source dramatically influences the petrophysical properties of sandstone. The sandstone sourced from the Red River has higher porosity and permeability, followed by the sandstone sourced from the Hainan Uplift, and the sandstone sourced from the palaeo-uplift within the basin has the lowest porosity and permeability. The feldspar dissolution by CO2 and organic acid is the primary formation mechanism of the effective reservoir in the Lingshui Formation, whereas the dissolution of glauconite is more common in the sandstone reservoirs of the Sanya and Meishan formations. [ABSTRACT FROM AUTHOR]

The significance of beach-bar reservoirs, which are intricately linked to unconventional hydrocarbon reservoirs, has gained increased attention. This study elucidates the complex mechanisms governing the formation, spatial distribution, and morphological characteristics of beach bars in Qinghai Lake, NW China, highlighting the interplay of lake-level fluctuations, wind wave dynamics, sediment provenance, and terrain gradient. Our findings reveal that large-scale lake-level fluctuations primarily dictate the initial formation settings of beach bars, while small-scale fluctuations refine their internal stratification and sedimentary features. Wind wave dynamics play a critical role in defining suitable depth zones for beach bar development, influencing their morphology and resulting in distinct sedimentary characteristics across different lake zones. Furthermore, the study categorizes beach bars into three main systems based on sediment provenance--bedrock, alluvial fan (fan delta), and braided river systems--each exhibiting unique compositional and structural attributes. Terrain gradient around the lake significantly affects beach bar formation, with areas having a gradient less than 0.7° being particularly favorable. This research advances our understanding of lacustrine beach bar dynamics, offering insights into their potential as indicators of past environmental conditions and their implications for hydrocarbon exploration. The comprehensive analysis of controlling factors provides a foundation for predicting beach bar distribution and contributes to the broader field of sedimentary geology by integrating multi-disciplinary approaches to study lacustrine sedimentary processes. [ABSTRACT FROM AUTHOR]

We discovered seafloor features such as bacterial mats and carbonate crusts typical for active methane seeps on the continental slope southwest of Svalbard. These features are associated with two main northwest-southeast trending morphological structures that are oriented parallel to the regional continental slope. Both structures occur at c. 800 m water depth, at the boundary between the Storfjorden trough mouth fan to the south and the Hornsund trough mouth fan to the north, which suggests a loading related fluid seepage. The main structure displays depressions and ridges forming a crater in its center. Other occurring features include small sediment mounds, domes often covered by bacterial mats, and hummocky seafloor colonized by siboglinid tubeworms. Free gas bubbles were spotted close to the centre and plumes along the rims of the structure. Thick carbonate crusts indicate a long seepage history in the center of the structure and on top of the ridges. The sources of the seeps are likely to be Miocene old organic-rich deposits, or Paleocene hydrocarbon reservoirs. [ABSTRACT FROM AUTHOR]

Enhanced sedimentation at glacial margins can produce submarine megaslides (>10,000 km3). We report a single megaslide in the Surveyor Fan, Gulf of Alaska. Minimum extant size is ∼16,124 km2 in area and ∼9,080 km3 in volume. Slope failure occurred ∼1.2 Ma at the onset of the mid‐Pleistocene transition (MPT). With accretion along the Aleutian‐Alaska Trench, the original volume is conservatively ∼16,280 km3, with only a 140 km run‐out due to its blocky, high shear strength nature. We suggest the megaslide was triggered by a major sediment influx at the onset of the MPT, when glacial‐interglacial cycles shifted from 41 to 100 Kyr. The absence of repeat megaslides may reflect a changing balance between seismic strengthening and sediment flux, where later sedimentation driven by cross‐shelf ice streams results in thin, fluidized, non‐cohesive slides. Continued accretion of the Surveyor Fan and megaslide also reduces critical wedge taper, further inhibiting major failure. Plain Language Summary: Sediment flux at glacial margins can produce submarine slides >10,000 km3 in size (megaslides). We report a single megaslide in the Surveyor Fan, Gulf of Alaska. Minimum extant size is ∼16,124 km2 in area and ∼9,080 km3 in volume. Failure occurred ∼1.2 Ma at the onset of the mid‐Pleistocene transition (MPT). Due to accretion along the Aleutian‐Alaska Trench, the original volume is conservatively ∼16,280 km3, but with only a 140 km run‐out due to its blocky, high shear strength nature. We suggest the megaslide was caused by the initial major sediment flux at the onset of the MPT, and that afterward only fluidized, thin, and non‐cohesive slides occurred. This is due to changing balance between seismic strengthening and sediment flux, and accretion of the Surveyor Fan and megaslide which reduces the critical wedge taper inhibiting major failure. Key Points: World's Fifth largest mapped megaslide documented beneath Surveyor Fan Gulf of AlaskaTiming of slope failure linked to onset of mid‐Pleistocene glacial intensificationAbsence of later failures due to changing balance of sediment flux/seismic strengthening and negative feedbacks from critical wedge processes [ABSTRACT FROM AUTHOR]

Alluvial fans are rapidly evolving landforms sensitive to changes in tectonic and climatic conditions. Their study provides useful information to unravel the landscape evolution of lowlands and mountainous regions where sediment transported by rivers originates. The chronology of alluvial fan deposits is crucial for the flood risk assessment of those populations settled on this type of dynamic landform. Here we provide (1) a review of the literature concerning climatic reconstructions for the Sierra de Gredos, (2) optically stimulated luminescence (OSL) ages and (3) topographical analysis to reconstruct the recent events that built-up the alluvial fans of the southern sector of Sierra de Gredos (Central Spain). The area is tectonically active and has a relatively simple lithology given by a deformed and fractured Paleozoic granite massif that was heavily eroded by Quaternary glacial advances. Our OSL results indicate that the recent build-up events span from ca. 5 ka up to the end of the 19th century. The chronology of events is consistent with the climatic change reported for Central Spain, where humidity seems to be a primary control in the recent activity of the alluvial fans. Additionally, topographic analysis on a 5-m-resolution LIDAR DEM help us to propose that, tectonics have been a major control of Gredos alluvial fans in a long-term scale, longer than the Holocene but, since the mid-Holocene to the present, climate is a primary control on their landscape evolution. We conclude that current climatic conditions favor fan degradation for the Gredos alluvial fans rather than sediment transport and fan aggradation. The present study emphasizes the necessity of supplementing OSL chronologies with other long-term geochronological techniques to confine the constructive periods of fans for the entire Holocene. [ABSTRACT FROM AUTHOR]

Distinguishing between shallow‐water delta and fluvial fan deposits in the subsurface of lacustrine basins is challenging due to their similar depositional characteristics and distribution patterns. This study focuses on the Middle Jurassic Shaximiao Formation in the central Sichuan Basin using core observations, seismic analyses, petrology analyses, zircon analyses, palaeoclimate indicators and palaeocurrent analyses to address this issue. Fifteen sedimentary lithofacies and eight lithofacies associations were established, corresponding to channelized fluvial deposits, non‐channelized fluvial deposits and shallow‐water delta deposits. Shallow‐water deltas are dominated by channels and mouth‐bar complexes with grey, red and green interbedded mudstone. Shingled seismic reflection, green mud clasts, small burrows and wave ripples are common with occasional palaeosols. Fluvial fans are dominated by channels and crevasse‐splays with pink colour and accompanied by red coloured floodplain deposits. Bright spot seismic reflection, red mud clasts, big burrows, current ripples and palaeosols are common. The increased uplift of the Dabashan Mountains controls the palaeocurrent direction, promoting the evolution from a shallow‐water delta in relatively humid environments to a fluvial fan in relatively arid environments. The channel widths in shallow‐water deltas are wider than those in fluvial fans, whereas the opposite applies for the channel amalgamation rate. Highly frequent channel‐width variations are controlled by short‐cycle climate fluctuation, corresponding to chemical index of alteration value fluctuations in different sandstone groups. The channel width in the relatively humid environments is wider than that in arid environments for both shallow‐water deltas and fluvial fans. It is likely that the sedimentary evolution from shallow‐water deltas to fluvial fans is relatively common in lacustrine basins in relatively arid environments with wide and gentle slope landforms. [ABSTRACT FROM AUTHOR]

The diagenetic evolution of sandstone is very complicated under the conditions of high temperatures and pressures in deep-water, deep-buried regimes, which have great influence on reservoir quality. This study investigates the typical reservoir target of Neogene deep-water, submarine-fan sandstones under high-temperature, high-pressure regimes in the Qiongdongnan Basin, South China Sea. Utilizing a thin section, scanning electron microscope (SEM), mineral geochemistry combined with burial history evolution, complex diagenetic events, and main controlling factors of the sandstone in the Neogene Meishan Formation were determined. The results show that the evolution of sandstone reservoirs is initially controlled by depositional framework compositions and subsequently modified by eogenetic and mesogenetic alterations during progressive burial. Eogenetic alterations mainly include the following: (1) mechanical compaction; (2) dissolution of feldspar; (3) low-Fe calcite cementation. Mesogenetic events were identified as the following: (1) dissolution of feldspar; (2) ferroan calcite and ankerite formation; (3) precipitation of quartz and clay mineral. Mechanical compaction is greatly influenced by the original depositional framework composition, and sandstone samples enriched in high contents of detrital clay matrix always experienced extensive mechanical compaction. Different phases of carbonate cement during different diagenetic regimes lead to continuous destruction on reservoir porosity. The dissolution of unstable feldspar minerals during eogenetic and mesogenetic environments leads to the development of secondary porosities and would enhance the quality of the reservoir. Overpressure formation is pervasively developed owing to early disequilibrium compaction and subsequent natural gas charging. Only well-sorted sandstones with low contents of detrital clay matrix could resist early mechanical compaction, lead to ample residual original porosities, and then undergo extensive mineral dissolution to generate sufficient secondary porosities. Subsequently, these porosities would be effectively protected by overpressure formation. Poor-sorted sandstones with high contents of detrital clay matrix would experience strong mechanical compaction and extensive destruction of original porosities. Thus, these sandstones are difficult to have significant dissolution and are unable to be effectively protected by overpressure formation. Therefore, the interplay between the original framework composition and the corresponding diagenetic pathways coupled with overpressure formation would result in strong reservoir heterogeneity for the deep-buried sandstones during progressive burial. [ABSTRACT FROM AUTHOR]

The turbiditic succession containing exotic blocks of various sizes deposited in the Çüngüş Basin, has been previously identified as the Çüngüş Formation in front of the Southeast Anatolian Suture Belt, Türkiye. These turbiditic sediments, dated as Eocene-Early Miocene, were interpreted as the lowermost allochthonous tectono-stratigraphic unit thrust over the Lice Formation during the Miocene within the Çüngüş-Hakkari nappes. In this study, the stratigraphical, sedimentological, palaeontological, and structural features of the Çüngüş and Lice formations are examined and reinterpreted within a basin model. Both formations consist of sandstones, siltstones, mudstones, and subordinate conglomerates, indicating ramp-fringe palaeochannel, submarine fan, and basin-floor turbidite facies associations. In the northern part of the basin, just in front of the suture belt, volcanic, metamorphic, and ophiolitic rocks and nummulitic limestones are included as blocks and tectonic slices within the turbidite succession. Based on nannoplankton analysis, both Çüngüş and Lice formations are assigned an Early Miocene age. The sedimentary facies associations filling the Çüngüş Basin are transitional from proximal to distal facies. The thrust in the previous maps separating the Çüngüş and Lice formations cannot be confirmed in the field. Based on our field observations and age data, we interpret that the Lice and the Çüngüş formations deposited continuously within the Çüngüş Basin that was opened as a foreland basin by flexural subsidence of the Arabian Autochthon under the crustal load of the Pütürge-Bitlis Massifs and the Maden Complex during the Early Miocene. The turbidite deposits containing exotic blocks in the north of the basin are interpreted as wedge-top deposits of the foreland basin, while those in the south are considered foredeep deposits. [ABSTRACT FROM AUTHOR]

The transfer of carbon from land to the near-coastal ocean is increasingly being recognized in global carbon budgets. However, a more direct transfer of terrestrial carbon to the deep-sea is comparatively overlooked. Among systems that connect coastal to deep-sea environments, the Congo Submarine Canyon is of particular interest since the canyon head starts 30 km into the Congo River estuary, which delivers ~7 % of the total organic carbon from the world's rivers. However, carbon and sediment transport mechanisms that operate in the Congo Canyon, and submarine canyons more globally, are poorly constrained compared to rivers because monitoring of deep-sea canyons remains challenging. Using a novel array of acoustic instruments, sediment traps and cores, this study seeks to understand the hydrodynamic processes that control delivery of particulate organic carbon via the Congo Submarine Canyon to the deep-sea. We show that particulate organic carbon transport in the canyon-axis is modulated by two processes. First, we observe periods where the canyon dynamics are dominated by tides, which induce a background oscillatory flow (speeds of up to 0.15 m/s) through the water column, keeping muds in suspension, with a net upslope transport direction. Second, fast-moving (up to 8 m/s) turbidity currents occur for 35 % of the time during monitoring periods and transport both muddy and sandy particulate organic carbon at an estimated transit flux that is more than ten times the flux induced by tides. Remarkably, organic carbon transported and deposited in the submarine canyon has a similar isotopic composition to organic carbon in the Congo River, and in the deep-sea fan at 5 km of water depth. Episodic turbidity currents, together with background tidal currents thus promote efficient transfer of river-derived particulate organic carbon in the Congo Submarine Fan, leading to some of the highest terrestrial carbon preservation rates observed in marine sediments globally. [ABSTRACT FROM AUTHOR]

Theory suggests that the response time of alluvial channel long-profiles to perturbations in climate is related to the magnitude of the forcing and the length of the system. Shorter systems may record a higher frequency of forcing compared to longer systems. Empirical field evidence that system length plays a role in the climate periodicity preserved within the sedimentary record is, however, sparse. The Toro Basin in the Eastern Cordillera of NW Argentina provides an opportunity to test these theoretical relationships as this single source-to-sink system contains a range of sediment deposits, located at varying distances from the source. A suite of eight alluvial fan deposits is preserved along the western flanks of the Sierra de Pascha. Farther downstream, a flight of cut-and-fill terraces have been linked to eccentricity-driven (100-kyr) climate cycles since ca. 500 ka. We applied cosmogenic radionuclide (10Be) exposure dating to the fan surfaces to explore (1) how channel responses to external perturbations may or may not propagate downstream, and (2) the differences in landscape response to forcing frequency as a function of channel length. We identified two generations of fan surfaces: the first (G1) records surface activity and abandonment between ca. 800 and 500 ka and the second (G2) within the last 100 kyr. G1 fans record a prolonged phase of net incision, which has been recognised throughout the Central Andes, and was likely triggered by enhanced 100-kyr global glacial cycles following the Mid-Pleistocene Transition. Relative fan surface stability followed, while 100-kyr cut-and-fill cycles occurred downstream, suggesting a disconnect in behaviour between the two channel reaches. G2 fans record higher frequency climate forcing, possibly the result of precessional forcing of climate (ca. 21/40-kyr timescales). The lack of a high-frequency signal farther downstream provides field support for theoretical predictions of a filtering of high-frequency climate forcing with increasing channel length. We show that multiple climate periodicities can be preserved within the sedimentary record of a single basin. Differences in the timing of alluvial fan and fluvial terrace development in the Toro Basin appears to be associated with how channel length affects fluvial response times to climate forcing as well as local controls on net incision, such as tectonic deformation. [ABSTRACT FROM AUTHOR]

Tectonics play a significant role in shaping the morphology of submarine canyons, which form essential links in source-to-sink (S2S) systems. It is difficult, however, to investigate the resulting morphodynamics over the long term. For this purpose, we propose a novel experimental approach that can generate submarine canyons and hanging-wall fans on continuously evolving active faults. We utilize morphometric analysis and morphodynamic models to understand the response of these systems to fault slip rate (Vr) and inflow discharge (Q). Our research reveals several key findings. Firstly, the fault slip rate controls the merging speed of submarine canyons and hanging-wall fans, which in turn affects their quantity and spacing. Additionally, the long profile shapes of submarine canyons and hanging-wall fans can be decoupled into a gravity-dominated breaching process and an underflow-dominated diffusion process, which can be described using a constant-slope relationship and a morphodynamic diffusion model, respectively. Furthermore, both experimental and simulated submarine canyon–hanging-wall fan long profiles exhibit strong self-similarity, indicating that the long profiles are scale independent. The Hack's scaling relationship established through morphometric analyses serves as an important link between different scales in S2S systems, bridging laboratory-scale data to field-scale data and submarine-to-terrestrial relationships. Lastly, for deep-water sedimentary systems, we propose an empirical formula to estimate fan volume using canyon length, and the data from 26 worldwide S2S systems utilized for comparison show a strong agreement. Our geomorphic experiments provide a novel perspective for better understanding of the influence of tectonics on deep-water sedimentary processes. The scaling relationships and empirical formulas we have established aim to assist in estimating volume information that is difficult to obtain during long-term landscape evolution processes. [ABSTRACT FROM AUTHOR]

Control strategies for variable-air-volume (VAV) air conditioning significantly affect both the air quality within buildings and the consumption of building energy. Current control techniques effectively regulate room temperature using feedback on temperature discrepancies, yet they also elevate the wear on terminal devices and boost the energy usage of the supply fan. In this paper, the hysteresis and inertia parameters of end air valves and supply fans under two seasonal conditions are derived from experimental data. Aiming at the problems of frequent switching of the end air valve, long total switching stroke, and high energy consumption of the air supply fan, a fuzzy PI regulation method is proposed based on the original pressure-independent series PI regulation, which effectively solves the above problems. Initially, data on how room temperature reacts to changes in air supply fan speed and the position of end air valves during winter and summer were gathered. Following model identification, parameters for various seasonal conditions were determined. Secondly, the roles of different components in the variable-air-volume regulation process were investigated. Investigations revealed that within pressure-independent variable-air-volume control, the supply fan and end air valve emerged as the primary subjects of the study. A double-closed-loop control with the speed control of the supply fan as the outer loop and the opening control of the end air valve as the inner loop was adopted. Compared with the traditional serial PI regulation, the room temperature error of this method was increased, but it reduced the total stroke of the valve by more than 43%, which greatly reduced the valve's loss and noise and saved more than 2.7% of the energy consumption of the air supply fan. [ABSTRACT FROM AUTHOR]

Early observations from the Perseverance rover suggested a deltaic origin for the western fan of Jezero crater only from images of the Kodiak butte. Here, we use images from the SuperCam Remote Micro‐Imager and the Mastcam‐Z camera to analyze the western fan front along the rover traverse, and further assess its depositional origin. Outcrops in the middle to lower half of the hillslopes comprise planar and inclined beds of sandstone that are interpreted as foresets of deltaic deposits. Foresets are locally structured in ∼20–25 m thick, ∼80–100 m long, antiformal structures interpreted as deltaic mouth bars. Above these foresets, interbedded sandstones and boulder conglomerates are interpreted as fluvial topset beds. One well‐preserved lens of boulder conglomerate displays rounded clasts within well‐sorted sediment deposited in overall fining upward beds. We interpret these deposits as resulting from lateral accretion within fluvial channels. Estimations of peak discharge rates give a range between ∼100 and ∼500 m3 s−1. By contrast, boulder conglomerates exposed in the uppermost part of hillslopes are poorly sorted and truncate the underlying beds. The presence of these boulder deposits suggests that intense sediment‐laden flood episodes occurred after the deltaic foreset and topset beds were deposited, although the origin, timing, and relationship of these boulder deposits to the ancient lake that once filled Jezero crater remains undetermined. Overall, these observations confirm the deltaic nature of the fan front, and suggest a highly variable fluvial input. Plain Language Summary: Early observations from the Perseverance rover of the Kodiak butte suggested a deltaic origin for the western fan of Jezero crater. Here, we use images from the SuperCam Remote Micro‐Imager and the Mastcam‐Z camera to analyze the western fan front along the rover traverse, and further assess its origin. We observe strata in the lower part of the fan front that we interpret as deltaic deposits formed below water in a lake. The strata of the upper part of the fan front contain sediments interpreted as fluvial deposits formed under various fluvial regimes, with some of them being deposited by the rivers that also fed the Jezero paleolake. Overall, these observations confirm the deltaic nature of the fan front, and suggest a highly variable fluvial input. Key Points: New observations from the Perseverance rover of the western fan front confirm a deltaic originDeltaic foresets in the lower fan front are organized as antiformal structures interpreted as delta mouth barsSandstones and conglomerates in the upper part of the fan front suggest a highly variable fluvial input [ABSTRACT FROM AUTHOR]

A year-round monitoring of Particulate Matter (PM) less than 2.5 μm in aerodynamic diameter (PM 2.5) and Total Suspended Particulate (TSP) from a conventional cage laying hen house was conducted to reveal their spatiotemporal variations of concentrations downwind of tunnel fans. The PM Emission Rate (ER) and the correlations between PM with meteorological parameters and ventilation rate were studied. Ten self-developed Particle Concentration Monitoring Units were distributed to multiple horizontal (2, 25, and 50 m) and vertical (2 and 5 m) locations for PM examination. Four PM 2.5 concentration categories were classified: good (0–35 μg m−3), moderate (35–75 μg m−3), unhealthy (75–150 μg m−3), and very unhealthy (150–350 μg m−3). Annual and monthly percentages of PM 2.5 and TSP sampling hours for each category were calculated. Significant temporal variations in ER were observed, with monthly average ER ranging from 0.05 to 0.86 mg d−1 hen−1 for PM 2.5 and 1.40–8.90 mg d−1 hen−1 for TSP. Approximately 10–40% of PM 2.5 sampling hours exceeded 75 μg m−3, while no TSP concentration was higher than the recommended threshold. The monthly percentage for the "very unhealthy" PM 2.5 category was higher in winter, whereas the highest monthly percentage for the 800–1,200 μg m−3 TSP category was found in summer. Higher PM 2.5 concentrations were prone to be observed at further sampling points, while higher TSP concentrations were mostly detected near the fans or on both sides of the sampling area. PM 2.5 and TSP were positively correlated with ambient temperature and ventilation rate, while negatively correlated with relative humidity. • The emission rate of particulate matter in laying hen house had seasonal variations. • PM 2.5 concentrations at further locations downwind of fans were prone to be higher. • TSP concentrations near the fans were prone to be higher. • Hazardous PM 2.5 concentrations were more frequently observed in winter. • PM 2.5 and TSP were correlated with meteorological parameters and ventilation rate. [ABSTRACT FROM AUTHOR]

The multicoloured 'Košna' conglomerates are investigated in the area of the Košna Voda spring, in the Brušane area of Velebit Mt., Croatia. The studied conglomerates consist of red-coloured matrix and clasts of various lithologies (sandstones, limestones, chert and quartz pebbles) and sizes, suggesting provenance from different areas. Average clast size and their percentage was determined by the Udden-Wentworth classification with estimation of the matrix content. Clasts and matrix lithological and mineralogical characteristics were determined using petrographic, ore microscopy, and X-ray diffraction analysis. Sandstone clasts in the studied conglomerates are classified as lithic arenites, subarkoses and arkoses. Limestone clasts are mostly wackestones to packstones with foraminifera, ostracods, echinoid and bryozoan fragments that derive from late Carboniferous/early Permian shallow-marine limestones. Calcispheres and incipient growth forms of Microcodium are also present, suggesting different sediment sources and resedimentation processes. Fragments of fusulinid foraminifera were identified in the matrix of the 'Košna' conglomerates. Based on the analyses performed, and field observations, the 'Košna' conglomerates are described as early Permian (Cisuralian) polymictic clast-supported to matrix-supported conglomerates and breccia-conglomerates that share structural and textural similarities with conglomerates from other areas in the Dinarides, as well as in the Eastern and Southern Alps. The 'Košna' conglomerates are younger than the Sakmarian and are comparable with the Trogkofel limestones of the Carnic Alps and the Karavanke Mts. in Slovenia. We suggest that the studied deposits originated from the uplifted Variscan Mountains during the Variscan and Saalian orogenic movements, and were finally deposited from tractive flows and occasional debris flows in a shallow marine environment of the Palaeo-Tethys, possibly in fan deltas. [ABSTRACT FROM AUTHOR]

The Qom Formation is the most important hydrocarbon reservoir target in Central Iran. The Qom platform developed in a back‐arc basin during the Oligo–Miocene due to the closing of the Tethyan Seaway. This formation consists of a variety of carbonate and non‐carbonate facies deposited on a platform ranging from supratidal to basin. A combination of tectonic and eustatic events led to some lateral and vertical facies variations in the study area. Six third‐order depositional sequences and related surfaces were identified regarding vertical facies changes in the studied sections of this Oligo–Miocene succession. According to all results and data, this succession was initially deposited during the Chattian upon a distally steepened ramp of siliciclastic‐carbonate composition, including the Bouma sequence. Then, from the late Chattian to the Aquitanian, the platform changed into a homoclinal carbonate ramp with a gentle profile. With respect to tectonic activity, this phase was a calm period during the deposition of the Qom Formation. Finally, a drowned carbonate platform and a rimmed shelf emerged during the Burdigalian, terminated by the continental deposits of the Upper Red Formation. Regarding all geological characteristics, three main tectono‐eustatic evolutionary phases have been recognized in the Qom back‐arc basin. [ABSTRACT FROM AUTHOR]

The presented work deals with the numerical modeling of intense bedload-transport processes at confluences of mountain rivers and steep tributaries. Steep tributaries are characterized by having high transport capacities which supply large amounts of sediments to the confluence zone, where due to the sudden change in slope and the local hydraulic conditions, intense deposition can occur. The objectives of this study are to understand the potential applications and limitations of 2D numerical simulations for modeling these processes. The calibration of the applied 2D numerical model (BASEMENT, Basic Simulation Environment, v2.8) is based on comparing high-density point clouds of the confluence morphology at the end of flume experimental runs with numerical results. The calibrated numerical model is then used to test different discharge ratios and to investigate depositional patterns and mechanisms. The results show that key morphological features such as the confluence fan, the bank-attached bar and the scour hole can be accurately reproduced, showing that 2D numerical simulations are a valuable tool for modeling the complex interactions between morphodynamics and hydraulics at river confluences. Additionally, it is shown that the confluence morphology of steep tributaries and mountain rivers is strongly influenced by the sediment concentration in the tributary channel and the discharge in the main channel. [ABSTRACT FROM AUTHOR]

As the core power element of a centrifugal fan, the impeller's structural parameters are important factors affecting the aerodynamic performance of the fan. Therefore, to improve the aerodynamic performance of centrifugal fans, in this study, we take the Powered Air-Purifying Respirator (PAPR) power system as the object of research and use a combination of computational fluid dynamics (CFD) and experimental validation to investigate the effects of the number of blades, blade inlet angle, blade outlet angle, blade height, and blade thickness on the aerodynamic performance of the fan. A five-factor, four-level orthogonal test table L16 (45) was selected to obtain the optimal combination of structural parameters for the impeller. In addition, in order to identify and visualize the features of the vortex, Q Criterion Normalized is applied to the simulation on the basis that the minimum pressure appears in the vortex core. In this study, Q Criterion Normalized is used to compare the internal vorticity of the prototype with that of the optimized prototype. The results show that (i) the order of influence of each parameter on the aerodynamic performance of the centrifugal fan is blade height > blade outlet angle > blade inlet angle > number of blades > blade thickness; (ii) the optimal combination of the structural parameters is number of blades 48, blade inlet angle 80°, blade outlet angle 120°, blade thickness 0.6 mm, and blade height 23 mm; the optimized prototype has an increase in air pressure of about 10%, an increase in air volume of about 31%, and an increase in efficiency from 49.61% to 53.57%; (iii) the intensity of internal vortices in the optimized prototype is weakened, the size of vortices and the number of vortices are reduced, and the homogeneity of the flow field is also improved. [ABSTRACT FROM AUTHOR]

This study is based on the detailed sedimentological analysis of eleven sections and one well through the late Eocene–Oligocene flysch formation of the Internal Ionian Zone (IIZ) in Western Greece. The sections are spread from the northern parts of Epirus to the north and Aitolokarnania to the south. Sedimentological data combined with biostratigraphic analyses resulted in a five-stage evolutionary model for the basin. Unit I corresponds to the lower part of the examined sections, indicating the onset of clastic sedimentation. Regarding depositional environments, it is regarded as a basin plain where lobe distal fringe accumulations occur. Unit II consists almost exclusively of heterolithic facies, marking the advance of a lobe complex system. Massive sandstone facies dominate unit III and can be considered a more proximal submarine fan system. Unit IV reflects a calm period of the basin, where mud-dominated heterolithics and hemipelagic mudstones were deposited. Hemipelagic mudstone facies with intervals of heterolithics, conglomerates, and deformed and massive sandstone facies characterize unit V. The architecture resembles a slope system incised by canyons and channels. The sand-rich intervals in Units III and V could act as the most favorable reservoir levels. In contrast, the sand-rich intervals in Unit II are considered less promising due to their higher heterogeneity. [ABSTRACT FROM AUTHOR]

Continental margins that exhibit high terrigenous input are generally located near deltas that are capable of transporting large quantities of sediments into the basin. However, in rare cases, high terrigenous sedimentation occurs in regions deprived of major riverine systems where the sedimentary pathway is enigmatic. One such case is the Neogene of the Pelotas Basin of Brazil and Uruguay, adjacent to the La Plata River mouth. Since the Miocene, anomalous sedimentation formed a giant progradational wedge, the Rio Grande Cone, one of the largest submarine fan-like features on Earth. To understand the Neogene evolution of the margin and the origins of the Rio Grande Cone, here we present a seismic-stratigraphic framework based on well-logs and 2D seismic data. Three depositional environments are identified: (1) on the shelf, upper Miocene to Pliocene fluvial channels delivered sand deposits on the mud-dominated shelf; (2) on the slope, sediment instability resulted in structural deformation and multiple phases of mass transport deposition and (3) on the lower slope and basin floor, large contourite drifts formed by sediment reworking. We classify the Rio Grande Cone as a megaslide complex, due to its depositional and structural setting. Local deltaic systems were active on the shelf in the Neogene, but the limited size of their paleo-drainage systems in comparison to the volume of sedimentation in the margin suggests that an additional sedimentary pathway existed. In this sense, the demise of an epicontinental sea over the La Plata Basin during the Neogene likely enabled the input of large volumes of fine sediments into the margin, via the La Plata plume water. We suggest that the desiccation of this epicontinental sea and the intensification of ocean currents since the middle Miocene explains the anomalous Neogene terrigenous influx into the SW Atlantic margin. [ABSTRACT FROM AUTHOR]

The Late Miocene source terrane tectonic history in the southern Gulf of Mexico Basin, as informed by detrital zircon geothermochronology data, supports a detailed regional palaeogeographic reconstruction from palaeoshoreline to the deepwater Zama minibasin of the Sureste salt basin. Seismic mapping points to a trio of pathways that converge upon two entry points into the Zama minibasin, illuminating how sediment gravity flows transit a complex seascape defined by shallow salt bodies. Consideration of empirical scaling relationships within and between segments of this sediment dispersal system allows for testable predictions of Upper Miocene submarine fan-runout lengths over basin exploration areas. Distances from the reconstructed shelf-margin to the Zama wells vary around 100 km, an increase of 20% over a straight-line distance as flows likely navigated around extant salt stocks, walls and sheets. This 100-km fan length is about 40% of the reconstructed minimum palaeo-river length, within predicted ranges for smaller source-to-sink systems in tectonically active areas (25 to 50%). The estimated fan-runout distance can be extended even further basinwards, considering the contemporaneous passage of the mobile Chortis block along the Tonala shear zone, expanding the Palaeo-Rio Grijalva drainage network during the Tortonian. These Late Miocene deepwater systems linked to the Palaeo-Rio Grijalva differ substantially from onshore Mexico-sourced turbidity flows feeding into the axis of the north-trending Veracruz Trough. Textural data from wells here suggests these systems were less effective at larger grain transport and sorting. Local (intrabasinal) variations are also evident within the Zama minibasin, as well data (image logs and cores) indicate that axially oriented sediment gravity flows involved fewer high-density turbidities, depositing lower net-to-gross sandstones and thicker shales than those flowing transverse to the basin axis from a southeastern basin entry point. These interpretations will guide both local exploitation of these economic resources and could also support future exploration for analogous salt-influenced deepwater reservoir systems in the Sureste basin and globally. [ABSTRACT FROM AUTHOR]

The submarine fan with a narrow shelf is usually reactive to environmental signal propagation; however, source-to-sink functioning can be further complicated by several allogenic forcings. Here, we document the high-frequency provenance variations and different sediment delivery models recorded in the late Triassic Zhuoni fan developed in the northeastern Paleo-Tethys Ocean, mainly based on process-based sedimentological and provenance study of the Panyuan section in the West Qinling area in the northeastern margin of Tibetan Plateau. High-, low-density turbidites, hybrid event beds and hyperpycnites are distributed in the lobe-dominated submarine fan succession. Field sedimentological evidence from surrounding outcrops suggests that shelf-edge failure was the main cause of most high-and low-density turbidites with the overall absence of submarine slides or slumps, whereas the narrow shelf configuration together with late Triassic humid pulses is favourable for the occurrence of flood-related hyperpycnites in the Zhuoni fan. Detrital zircon grains (N = 6; n=123-272) generally have Palaeozoic-Mesozoic ages (ca. 350-250 Ma and 500-400 Ma) and Neoarchean-Paleoproterozoic ages (ca. 2100-1750 Ma and 2600-2400 Ma), but they can be further categized into three age groups due to different proportions of Precambrian age populations. The results demonstrate that the potential source areas may include the South and North Qinling Orogenic Belt, Qilian Orogenic Belt, different segments of North China Craton and the tectonic junction area between the Qinling and Qilian Orogenic Belts. The temporal changes in provenance signals, which are reflected by both the detrital zircon age spectra and heavy mineral assemblages, indicate different contributions of those sources in response to sea-level fluctuation. It could thus give rise to temporal variations between reactive and buffered source-to-sink sediment delivery models of the Zhuoni fan, despite the overall narrow shelf configuration. The development of the lowstand Zhuoni fan was directly related to extrabasinal hyperpycnal delivery from the river mouth and its high-frequency provenance variability recorded different efficiencies of signal transfer through the onshore catchment with significantly influence of temporal storage, fluvial rejuvenation or even regional climate variability. The highstand submarine fan was thought to be formed by shelf-edge failure with sediment buffering in the shelf region, which was associated with a strong magnitude of provenance mixing. Our work provides a new perspective for deciphering the different origins of deep-water sediment delivery in response to high-frequency sea-level and climate changes. [ABSTRACT FROM AUTHOR]

Marginal and deeper marine facies typify the Miocene exposures along the western margin of the Gulf of Suez rift basin. The stratigraphic setting of these facies is a subject of debate and confusing at best. Integrative sedimentological and sequence stratigraphic study of successions exposed in the St. Paul and El-Zeit blocks provides insight into the lateral relationships between the two facies and their evolution, a topic that is not fully understood. The St. Paul block, located at the basin margin, has thin shallow marine facies, while the succession of El-Zeit block, situated near the basin axis, consists of basal conglomerates, thin shallow marine carbonates, thick deeper marine shale and marginal evaporites. The facies architecture of these successions is interpreted as belonging to two different depositional models: a fan-delta/lagoon system followed upwards by an alluvial fans/sabkha-tidal flat system in the St. Paul hangingwall basin, and carbonate-siliciclastic-evaporite systems on the hangingwall dip-slope ramp of El-Zeit block. These models may help understanding the sedimentary history of other similar blocks in the rift basin. The studied facies show many striking features such as deposition during tilting of fault block, abrupt facies and thickness variations, coarse clastic shedding, erosion channel filling, onlapping of high standing blocks and evaporite accumulation. These features are the result of major tectonic events that triggered the formation of unconformities at different hierarchical levels during the late early to middle Miocene. These unconformities subdivide the Miocene facies into five depositional sequences separated by basin-wide erosional boundaries. This division greatly improves the age control of marginal marine facies. It affords new insight into the evolution of marginal marine facies along the western margin of the basin in relation to deeper facies in the basin centre. Facies and thickness changes in these tectonically induced sequences indicate that basin floor irregularities, subsidence rates, climatic changes, variable sediment influx, sea-level/brine-level changes and basin isolation/connection to the Mediterranean Sea are also important factors responsible for their evolution. [ABSTRACT FROM AUTHOR]

The influence of bottom currents on submarine channels has been widely recognized, for instance, by the formation of asymmetric channel-levee systems and drifts. In contrast, it is often considered that submarine lobes can be only reworked by strong bottom currents and are not affected by bottom currents during their deposition. In this study, we analyse the potential effect of bottom currents on different hierarchical lobe architectures that formed during the lower Oligocene in the Rovuma Basin offshore East Africa. We characterize the stacking patterns, morphology and connectivity of different hierarchy lobes using well data and three-dimensional seismic data. We found no direct influence of bottom currents on the lobe complexes and single lobes that show a unidirectional stacking pattern that is opposite to the direction of bottom currents. Lobe elements in single lobes display vertical accretion with no obvious relationship with bottom currents. Additionally, the first deposited single lobe morphology presents an asymmetric shape, with a thicker lobe margin on the downstream side of the bottom currents, but this is due to an initial low topography on the downstream side rather than bottom currents. The architectural distribution reflects that the topography present before the depositions of the submarine lobes was controlled by previous asymmetrical channel-levee systems formed by the synchronous interaction of bottom currents and gravity flows. This asymmetric topography controls the subsequent deposition of lobes and results in the migration of single lobes in the upstream direction of bottom currents. Although weak to moderate bottom currents may not be able to substantially rework submarine lobes, our results demonstrate that they may control the geometry and evolution of submarine channels and thus indirectly affect the thickness and migration of lobes in more environments than previously thought. [ABSTRACT FROM AUTHOR]

This study provides a sedimentological, stratigraphic and palaeocurrent investigation of Upper Eocene to Lower Oligocene deep-sea fan deposits found in the central part of the Pindos foreland basin in western Greece. According to facies analysis, the examined succession at Amfilochia area has 13 sedimentary facies and 10 facies and sub-facies associations. Depositional elements include abyssal plain pelagics, outer fan, inner fan, and slope deposits. Outer fan sediments are classified as lobe-axis, lobe-off-axis, lobe-fringe, and distant lobe-fringe deposits, while inner fan sediments are classified as channel-fill, crevasse-splay, internal and external levee deposits. The stratigraphic study shows an upward shift from abyssal plain pelagics to outer, inner fan, and finally slope deposits, implying submarine fan system progradation and progressive infilling of a deep-water sediment depocentre. The sediments were deposited in the foredeep of the Pindos foreland system and correspond to the system's underfilled stage, when sedimentation was unable to exceed the accommodation provided by lithospheric flexure. They point to deposition near the onset of the Pindos orogen, after the closure of the Pindos basin because of the collision of the Apulian with the Pelagonian microplate during the Cretaceous-Palaeogene period. Palaeocurrent data from sole marks show bipolar directions associated with two distinct spreading sub-marine fan deposits. As a result, the study region was split into Upper (major SE-direction flow) and Lower (major NW-direction flow) parts, indicating that axial flows were predominant during sediment deposition. However, as the deposition of the elements continued, the progradation of both systems constrained the space accommodation because of the increased basin sediment supply and forced an increase in the degree of basin confinement that changed the compensational to aggradational stacking pattern. The goals of this research are to develop an updated facies model for these deep-sea fans as well as a robust correlation framework for the various stratigraphic units in the central Pindos foreland basin. This research also connects the stratigraphic development of deep-sea fan deposits to the evolutionary phases of the Pindos foreland system, providing fresh insights into the palaeogeographic circumstances in the Pindos foreland basin. [ABSTRACT FROM AUTHOR]

The deposits of the upper Neoproterozoic Zerrissene Group of central‐western Namibia represent a large siliciclastic deep‐water depositional system that showcases the intricacies of facies and architectural relationships from bed‐scale to fan‐system‐scale. The lack of vegetation in the Namib Desert and regular east–west repetition of folded stratigraphy (reflecting ca 50% tectonic shortening) provides quasi‐three‐dimensional exposure over a current area of approximately 2700 square kilometres. The Brak River Formation, the middle sand‐rich unit of the Zerrissene Group, consists of nearly 600 m of strata exposed in multiple parallel continuous outcrops up to ca 10 km in length and oriented obliquely to depositional dip. Ten stratigraphic sections are correlated ca 32 km (ca 64 km restored) across the basin and offer exposure comparable in scale to modern submarine fans. Six sedimentary facies are identified and grouped into four facies associations that represent axial‐to‐marginal portions of deep‐water lobes in an unconfined submarine fan system. Spatial facies patterns, regional thickness variations, and palaeocurrents indicate that Brak River Formation sediments were transported primarily from the north to south–south‐west through a trough‐like basin, and deposited within an unconfined basin plain at the junction of the Adamastor and Khomas oceans. The unique outcrop exposure and extent permits the documentation of system‐scale architecture and basin configuration of the Brak River submarine fan system. A transition from the sand‐rich lower Brak River Formation to more intercalated mudstone‐dominated intervals in the middle and upper Brak River Formation is interpreted to record a change from aggradational to compensational stacking of lobe deposits. This records the evolution of a large submarine fan as it filled the subtle seafloor topography and became less confined at the system‐scale. The documentation of these deep‐water deposits from centimetre‐scale to basin‐scale provides a new model for a system with extensive long‐distance transport of sand‐rich sediment gravity flows to submarine lobes without apparent channelization. [ABSTRACT FROM AUTHOR]

Deep-sea eukaryotic microorganisms play a vital role in degrading organic matter and geochemically cycling elements in the deep ocean. However, the impact of sampling methods on detection of these microorganisms under high hydrostatic pressure remains uncertain. In this study, we compared a traditional water sampling method using a Niskin bottle, an in situ microbial filtration and fixation method (ISMIFF), and a multiple in situ nucleic acid collection (MISNAC) method to exhibit differences in the community structures that were collected at ~590–3100 m in the South China Sea (SCS). The classification and biodiversity indices of 18S rDNA Illumina sequencing reads from the V9 variation region revealed higher diversity for MISNAC DNA absorption column samples compared to others. Importantly, the relative abundance of Ciliophora (19.49%), Copepoda (23.31%), and Diplonemea (10.67%) was higher in MISNAC adsorption column samples, while Retaria (48.86%) were dominant in the MISNAC membrane samples. This indicates that MISNAC columns might collect more DNA in situ for the naked protists, while Retaria with a carbonate shell were more likely retained on the membrane. In conclusion, MISNAC is an effective method for DNA collection of deep-sea eukaryotic microorganisms and provides valuable materials for studying deep-sea microbial ecosystems. [ABSTRACT FROM AUTHOR]

Subaquatic channels, situated in lakes, fjords, submarine canyons and on deep-sea fan systems, exhibit diverse morphometric characteristics controlled by sediment transport processes, particularly turbidity currents. These processes play a significant role in transporting sediment, organic carbon, nutrients, and pollutants and pose hazards to critical infrastructure. This study examines a balanced set of subaquatic channels across various settings, sizes, and locations, employing novel data harmonization techniques to address biases toward larger channels. The analysis reveals consistent scaling relationships, particularly the dominant role of bankfull width, influencing bankfull depth, cross-sectional area, wavelength, and amplitude. The aspect ratio (width-to-depth) emerges as a significant parameter, reflecting a necessary channel compactness to maintain turbidity currents. Meandering development reveals relations between width, wavelength, and amplitude, with a preference for specific ratios. Meandering is most pronounced at channel beginnings, transitioning to straighter forms downstream, potentially influenced by flow dynamics and flow confinement. The study broadens the understanding of subaquatic channel evolution, emphasizing the importance of bankfull width and providing insights applicable across settings and scales. [ABSTRACT FROM AUTHOR]

Investigating the sedimentary architecture and evolution of sand-rich submarine fans is vital for comprehending deep-water sedimentary processes and enhancing the success rate of hydrocarbon resource exploration. Recent drilling activities in the Qiongdongnan Basin, northern South China Sea, have unveiled significant gas hydrate and shallow gas potential. However, exploration in this area faces substantial challenges due to the limited understanding of sandy reservoirs. Leveraging extensive newly acquired extensive 3D seismic data (~9000 km²) and well data, our study reveals five distinct deep-water depositional systems in the Quaternary Ledong Formation, including a submarine fan system, mass transport deposits, deepwater channel-levee systems, slope fans, and hemipelagic sediments. Notably, the targeted sandrich submarine fan lies within the abyssal plain, situated at a water depth of 1300-1700 m. This fan exhibits a unique tongue-shape configuration and a SW-NE flow direction within the plane and spans an expansive area of ~2800 km² with maximum length and width reaching 140 km and 35 km, respectively. Vertically, the fan comprises five stages of distributary channel-lobe complexes, progressing from Unit 1 to Unit 5. Their distribution ranges steadily increase from Unit 1 to Unit 3, followed by a rapid decrease from Unit 4 to Unit 5. Our results suggest that the occurrence and evolution of the submarine fan are primarily controlled by sea level fluctuation, confined geomorphology, and sediment supply. Specifically, sea level fluctuation and sediment supply influenced the occurrence of the submarine fan. Concurrently, the confined geomorphology in the abyssal plain provided accumulation space for sediments and shaped the fan into its distinct tongue-like form. In contrast to the deepwater channels within the deepwater channel-levee systems, the distributary turbidite channels within the submarine fan are marked by lower erosion depth with "U" shapes, greater channel width, and higher ratios of width to depth. The comparative analysis identifies turbidite channels as the focal points for offshore gas hydrate and shallow gas exploration in the Qiongdongnan Basin. Furthermore, the temporal evolution of submarine fan offers valuable insights into Quaternary deep-water sedimentary processes and hydrocarbon exploration within shallow strata of marginal ocean basins. [ABSTRACT FROM AUTHOR]

For the first time, this study presents interpretations of alluvial fans in spectral decomposition RGB Blends, analysed in seismic time slices from the Middle Triassic to Lower Jurassic stratigraphical interval of the Horda Platform (northern North Sea). The time slices record a shifting alluvial fan front, fluvial variability, uplift and erosion and reveals depositional elements that may set the common conception of the geological development of this area during the Early–Middle Mesozoic up for discussion. Results show that the Upper Triassic Lunde Formation in the eastern margin of the Horda Platform was characterized by the deposition of coalesced alluvial fans. A variable extent of the fan front through the Upper Triassic is linked to interplaying allogenic factors: uplifted source areas in the aftermath of Early–Middle Triassic rifting determined sediment availability; climate transitioning from arid to semi‐humid, with increasingly fluctuating precipitation, controlled sedimentation, and run‐off; provenance dictated bulk sedimentology and affected prevailing alluvial processes. An overall retreat of the fan system through the Late Triassic coincided with a significant change in landscape characteristics at the transition into the overlying Statfjord Group. Uplift and initial tilting of the Horda Platform caused landscape degradation and the formation of plateaus and incised valleys, contemporaneous with increased humidity and marine transgression, forming estuaries. The shift in depositional style has implications for reservoir properties, creating complexity and heterogeneity in terms of facies distribution and connectivity, which may benefit potential CO2 storage. Upper Triassic alluvial fan development in the Horda Platform (northern North Sea) depicted through spectral decomposition of seismic time slices Enhanced level of seismic stratigraphic interpretation with RGB blending Impact of allogenic factors on alluvial depositional development Implications of alluvial variability on reservoir properties [ABSTRACT FROM AUTHOR]