Search

The use of biomass can be a strategic way to realize a carbon-neutral energy plan, ensuring a fuel feedstock. Residual biomass arising from pruning is demonstrated to be an important energy resource in terms of quantity and quality. In the Salento peninsula, Apulia Region, in the south of Italy, a dramatic outbreak of Xylella fastidiosa has decimated olive trees since 2013, gaining a considerable amount of wood biomass. This paper, starting from the need to find a way to optimize the use of this available stock, reviews the main technologies on the utilization of olive wood for energy purposes. In particular, processes and products are here described, and an energy analysis compares lower heating value (LHV), higher heating value (HHV), mass yield, process operating conditions, and energy generated and spent by the process in order to find the most effective technology in order to optimize the energy use of olive biomass. The conclusions show the advantages and disadvantages of each technology. Pyrolysis performs well, showing the best results for both char HHV and syngas yield under different operating conditions. Gasification seems to be the most appropriate among conversion technologies to optimize olive tree pruning for energy purposes, as it can be used to produce both electrical and thermal energy. In terms of economic valorization, char is the most promising material representing a value-added product, the quality and versatility of which ranges from fuel to soil improvers and additives for the construction of supercapacitors. Conversely, its disadvantages are mainly represented by high ash content, which can slightly decrease the boiler efficiency. Finally, the amount of alkali metals can produce several problems, such as fouling, slagging, corrosion, etc., posing a challenge for combustion control and pollutant minimization. [ABSTRACT FROM AUTHOR]

This paper contributes to the climate policy discussion by focusing on the challenges and opportunities of reaching net zero emissions by 2050 in Italy. To support Italian energy planning, we developed energy roadmaps towards national climate neutrality, consistent with the Paris Agreement objectives and the IPCC goal of limiting the increase in global surface temperature to 1.5 °C. Starting from the Italian framework, these scenarios identify the correlations among the main pillars for the change of the energy paradigm towards net emissions by 2050. The energy scenarios were developed using TIMES-RSE, a partial equilibrium and technology-rich optimization model of the entire Italian energy system. Subsequently, an in-depth analysis was developed with the sMTISIM, a long-term simulator of power system and electricity markets. The results show that, to achieve climate neutrality by 2050, the Italian energy system will have to experience profound transformations on multiple and strongly related dimensions. A predominantly renewable-based energy mix (at least 80–90% by 2050) is essential to decarbonize most of the final energy consumption. However, the strong increase of non-programmable renewable sources requires particular attention to new flexibility resources needed for the power system, such as Power-to-X. The green fuels produced from renewables via Power-to-X will be a vital energy source for those sectors where electrification faces technical and economic barriers. The paper's findings also confirm that the European "energy efficiency first" principle represents the very first step on the road to climate neutrality. [ABSTRACT FROM AUTHOR]

[Display omitted] • Dynamic evaluation of economic and energy benefits due to thermostatic valve installation. • Dynamic evaluation of economic and energy benefits due to heat metering installation. • The adoption of both thermostatic valves and heat metering least to a payback period lower than 2 years. • Analysis carried out considering several shapes of typical building. The aim of this paper is to propose a novel approach in order to accurately calculate the energy and economic savings due to the use of heat metering and thermostatic valves in residential buildings. The paper aims at proving that the present simplified approaches used in European Legislation may lead to significantly underestimate the profitability of this technology. The study is developed for four different typologies of buildings located in the city of Naples (South of Italy), including their geometrical and thermophysical properties. The buildings are first modelled in Google Sketchup and subsequently linked to the TRNSYS environment, which also includes a detailed model of the piping systems. The models allow one to evaluate, for every period of the year, energy demand, energy supplied by radiators, heat gains, transmission, etc. The developed models are used to calculate energy demands for three scenarios for each type of building: centralized heating systems not equipped with heat metering; thermostatic valves without heat metering; heat metering and thermostatic valves. The possible savings related to thermostatic valves and heat metering are estimated using the developed model. The results are compared with the ones provided by the Italian Standards. Results show that the thermostatic valves adoption leads to a significant reduction, up to 50%, of the thermal energy demand of the residential buildings and that all the proposed systems exhibit a remarkable economic profitability, with a payback period lower than 1.7 years. [ABSTRACT FROM AUTHOR]

Renewable energy sources are environmentally friendly and cost-efficient. However, the problem with these renewable resources is their heavy reliance on weather conditions. Thus, at times, these solutions are not guaranteed to meet the required demand all the time. For this, hybrid microgrids are introduced, which have a combination of both renewable energy sources and non-renewable energy resources. In this paper, a cost-efficient optimization algorithm is proposed that minimizes the use of non-renewable energy sources. It maximizes the use of renewable energy resources by meeting the demand for utility grids. Real data based on the load and demand of the utility grids in Italy is used, and a system that determines the optimal sizing of the microgrid and a daily plan is introduced to optimize the renewable resources operations. As part of the proposal, the objective function for the operation and planning of the microgrid in such a way to minimize cost is formulated. Moreover, a variant of the PSO algorithm named recurrent PSO is implemented. The recurrent PSO algorithm solves the proposed optimization objective function by minimizing the cost for the installation and working of the microgrid. Afterwards, the energy management system algorithm lays out a plan for the daily operation of the microgrid. The performance of the system is evaluated using different state-of-the-art optimization methods. The proposed work can help minimize the use of diesel generators, which not only saves financial resources but also contributes toward a green environment. [ABSTRACT FROM AUTHOR]

The management of the distribution network is becoming increasingly important as the penetration of distributed energy resources is increasing. Reliable knowledge of the real-time status of the network is essential if algorithms are to be used to help distribution system operators define network configurations. State Estimation (SE) algorithms are capable of producing such an accurate snapshot of the network state but, in turn, require a wide range of information, e.g., network topology, real-time measurement and power profiles from customers/productions. Those profiles which may, in principle, be provided by smart meters are not always available due to technical limitations of existing Advanced Metering Infrastructure (AMI) in terms of communication, storage and computing power. That means that power profiles are only available for a subset of customers. The paper proposes an approach that can overcome these limitations: the remaining profiles, required by SE algorithms, are generated on the basis of customer-related information, identifying clusters of customers with similar features, such as the same contract and pattern of energy consumption. For each cluster, a power profile estimator is generated using long-term power profiles of a limited sub-set of customers, randomly selected from the cluster itself. The synthesized full power profile, representing each customer of the distribution network, is then obtained by scaling the power profile estimator of the cluster to which the customer belongs, by the monthly energy exchanged by that customer, data that are easily available. The feasibility of the proposed approach was validated considering the distribution grid of Unareti SpA, an Italian Distribution System Operator (DSO), operating in northern Italy and serving approximately one million customers. The application of the proposed approach to the actual infrastructure shows some limitations in terms of the accuracy of the estimation of the power profile of the customer. In particular, the proposed methodology is not fully able to properly represent clusters composed of customers with a large variability in terms of power exchange with the distribution network. In any case, the root mean square error of the synthesized full power profile with the respect to validation power profiles belonging to the same cluster is, in the worst case, on the order of 6.3%, while in the rest of cases is well below 5%. Thus, the proposed approach represents a good compromise between accuracy in representing the behavior of customers on the network and resources (in terms of computational power, data storage and communication resources) to achieve that results. [ABSTRACT FROM AUTHOR]

Worldwide, the use of fossil fuels covers almost 80% of the entire energy needs. In the European Union (EU), 2020 represents a watershed: for the first time, renewables were the main source of electricity. In Italy, the latest surveys demonstrate an increase in the use of alternative energy sources. European legislative framework highlights the importance of these new trends encouraging (and imposing) the use of renewables. The necessity to become more proactive in the energy production–consumption process and in the achievement of sustainability targets brings people to create Energy Communities (ECs) to manage their own energy supply chain. The authors present an overview of the main legislative framework in the EU and Italy in relation to ECs, analyzing the energy consumption, the electricity and heat energy production potentiality, and the energy balance in a portion of an Italian middle-size city in the Milan metropolitan area. Moreover, they underline the technical, regulatory, and planning possibilities to achieve energy independence, exchanging energy among the selected urban district when there is a surplus in production. Lastly, the authors underline the strengths and barriers to the development of ECs. [ABSTRACT FROM AUTHOR]