Search

Efficient hydrogen production relies on cost-effective and durable non-noble metal electrocatalysts for the hydrogen evolution reaction (HER). In this work, a liquid metal-assisted solid-flame combustion synthesis (SF-CS) method was used to create transition metal carbide TMC) nanocrystals with exposed facets. The TMCs include TiC, VC, NbC, TaC, Ta 2 C, WC, and Mo 2 C. In acidic solutions, the TMC nanocrystals show enhanced conductivity and superior HER performance, as evidenced by their lower Tafel slope, higher current density, and decreased overpotential. In particular, Mo 2 C nanocrystals exhibit an overpotential of 95 mV and a Tafel slope of 26 mV dec−1. These findings highlight a noteworthy improvement over previously reported nanostructures in recent years in terms of the HER properties of Mo 2 C with particular facets. This improvement is attributed to the unique surface characteristics, such as energy and active sites, which are impacted by various factors and require more investigation to meet the intended goals. [Display omitted] [ABSTRACT FROM AUTHOR]

In this study, tantalum network nanoparticles are prepared from a Ta 2 O 5 + k Mg system via a liquid magnesium-controlled combustion reaction. Super-stoichiometric amounts of magnesium are used in the preparation of a reaction mixture to produce a liquid magnesium pool capable of lowering the combustion temperature and leading to the formation of Ta network structures. The heat transfer kinetics from the hot reaction zone of 'cold' Mg particles is determined using heat transfer-coupled fluid dynamics simulation software. The formation of network structures is characterized through SEM, TEM, XRD, and BET analysis techniques. The mechanism of network formation is explained based on solid particle collisions in liquid media. Our method is able to produce Ta network structures in which the size of individual particles ranges between 50 and 700 nm. [ABSTRACT FROM AUTHOR]

Abstract This paper reports the preparation of Ti microparticles that are angular and spherical in shape through the combustion of a TiO 2 + αCa (where α is moles of Ca) exothermic mixture in an inert atmosphere. The relationship between the combustion parameters and the properties of the resultant Ti particles is discussed with consideration of the effect of Ca concentration. Using excess amounts of Ca in the experiment was effective in modifying the shape of the particles from angular to spherical. The Ti powder was found to be well-dispersed and the diameter of individual particles ranged from 5 µm to 50 µm. Based on the combustion parameters, the activation energy for the redox reaction was calculated as ∼ 138 kJ/mol. This paper discusses the chemistry of the reduction process and highlights the effects of combustion temperature and the amount of liquid calcium on the characteristics of the Ti particles. Graphical abstract The combustion process in TiO 2 + Ca mixture developed a maximum temperature of about 1820 °C and resulted in Ti spherical particles. fx1 [ABSTRACT FROM AUTHOR]

Abstract We developed an attractive combustion approach for synthesizing uniformly shaped AlN dendritic crystals by combustion of Al + 0.1AlF 3 + k Al 2 O 3 powder mixtures in a nitrogen atmosphere. The combustion temperature measured for various k values was between 1650 and 1750 °C and the micro-droplets of Al formed in the beginning stages of the process were enveloped by the solid layers of Al 2 O 3 , and the subsequent multipoint nucleation and crystallization produced morphologically and size uniform dendritic crystals. We proposed a theoretical model for calculating the thickness and the number of Al 2 O 3 layers around of Al microdroplets at known concentration of Al 2 O 3. Depending on the concentration of Al 2 O 3 , these structures were simple stars with six points and stellar dendrites with multiple petals. [ABSTRACT FROM AUTHOR]

In this study, a single-step combustion process for the synthesis 1-D, 2-D, and 3-D micro and nanostructures of AlN was developed. The structures were grown by combustion of Al+ k AlF 3 (or ZnF 2 )+ m NH 4 Cl reaction mixture under 4.0 MPa nitrogen atmosphere. Based on experimental data, the growth conditions, morphology, and composition, optical, and thermal properties of AlN micro and nanostructures were determined. The formation of structures was associated with the combustion temperature, liquid and gas-phase reactions, and the type of additives used in the experiments. The new insight, we gleaned from this study may help in the selective growth of AlN micro and nanostructures of different morphology, enhancing their functionality. [ABSTRACT FROM AUTHOR]

In this study, we examined the effect of potassium perchlorate (KClO 4 ) and magnesium hydroxide (Mg(OH) 2 ) additives on the combustion behavior of a ZrO 2  + 2Mg mixture to produce a fine powder of zirconium metal. The results of thermodynamic analysis and experiments imply that nearly 0.04 mol of KClO 4 is needed to initiate a combustion reaction in the ZrO 2  + 2Mg system. As the amount of KClO 4 increases from 0.04 to 0.1 mol, the combustion temperature increases from 1250 to 1850 °C. This results in formation of fine zirconium powder with a typical particle size of less than 5 µm, and with 1.4–2.2 wt% residual oxygen. Subsequent reduction of particle size to 100–500 nm, and oxygen content to <1.0 wt% was achieved by adding Mg(OH) 2 . The as-prepared Zr powder was mixed with nitrocellulose and printed onto 10–100 µm thin-layers to study their burning stability. The wave propagation in a thin layer was on the order of 0.35–30 cm/s, which is suitable for applications requiring localized power generation. [ABSTRACT FROM AUTHOR]

In this study, a combustion process for a TiO 2 + 0.12Al + (2.5 + 6 k )Mg + 0.021V 2 O 5 + k MgCl 2 ·6H 2 O mixture was studied to fabricate Ti-6Al-4V alloy spherical particles. From the temperature-time profiles, the average value of the synthesis temperature was estimated to be 1650 ± 20 °C. Based on FESEM observations, spherical shape particles were obtained when 0.05–0.1 mol MgCl 2 ·6H 2 O was added to the initial reaction mixture. Therefore, spherical alloy particles were achieved by consecutive processes of cooling and acid purification of the burned down sample. According to laser particle size analysis, the average diameter of the spheres was between 5 and 25 μm. A selective laser melting process was applied to build dense Ti-6Al-4V alloy samples. The tensile properties and the microhardness were evaluated and compared to those characteristics of a reference sample prepared from commercial Ti-6Al-4V alloy spherical powder. [ABSTRACT FROM AUTHOR]

This study deals with combustion behavior of B 2 O 3 /Mg/NH 4 Cl/C complex systems for the synthesis of amorphous boron (B), boron carbide (B 4 C), and boron nitride (BN) nanostructures. The raw mixtures used in the experiments were prepared on the base of a B 2 O 3 –Mg precursor mixture, which is sufficiently exothermic to maintain a self-propagating regime of the combustion reaction. Thermodynamic analysis of the combustion temperatures and experimental validation indicate that the 1000–1500 °C temperature range is very effective for synthesizing the nanostructures of B, B 4 C, and BN. It was found that B-containing functional nanostructures are mainly spherical nanoparticles (B) or nanosheets (B 4 C, BN). The phase composition and microstructural characteristics of the final products were evaluated based on the combustion temperature and solid/liquid phase changes. [ABSTRACT FROM AUTHOR]

A melt-assisted solid flame synthesis approach was applied to synthesize boron nanoparticles in argon gas and air atmospheres. For this purpose, we investigated the characteristics of a thermally induced combustion wave in B 2 O 3 + α Mg mixtures ( α = 1.0–1.5 mol) in argon and air atmospheres. Utilizing stoichiometrically insufficient amounts of magnesium ensured that a large portion of molten B 2 O 3 remained in the sample, which reduced the combustion parameters and favored the formation of boron nanoparticles. Under these conditions the combustion temperature and burning velocity were controlled in the range of 1300–1580 °C and 0.065–0.18 cm/s, respectively, and boron nanoparticles in a ∼20–200 nm size range were obtained. The characteristics of boron nanoparticles (morphology, purity, specific surface area, oxidation activity, etc.) were analyzed and a reaction pathway leading to boron nanoparticles synthesis was proposed. [ABSTRACT FROM AUTHOR]

We have investigated a thermally induced combustion route for preparing 2D hexagonal BN nanoplates from B 2 O 3 +(3+0.5 k )Mg+ k NH 4 Cl solid system, for k =1–4 interval. Temperature–time profiles recorded by thermocouples indicated the existence of two sequential exothermic processes in the combustion wave leading to the BN nanoplates formation. The resulting BN nanoplates were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy, PL spectrometry, and Brunauer–Emmett–Teller surface area analysis. It was found that B 2 O 3 was converted into BN completely (by XRD) at 1450–1930 °C within tens of seconds in a single-step synthesis process. The BN prepared at a k =1–4 interval comprised well-shaped nanoplates with an average edge length ranging from 50 nm to several micrometer and thickness from 5 to 100 nm. The specific surface area of BN nanoplates was 13.7 g/m 2 for k =2 and 28.4 m 2 /g for k =4. [ABSTRACT FROM AUTHOR]