Search

Metal halide perovskites, such as iodine methylamine lead (MAPbI3), have received extensive attention in the field of photocatalytic decomposition of HI for hydrogen evolution, due to their excellent photoelectric properties. In this paper, a new MAPbI3-based composite, MoC/MAPbI3, was synthesized. The results show that 15 wt% MoC/MAPbI3 has the best hydrogen production performance (38.4 μmol h−1), which is approximately 24-times that of pure MAPbI3 (1.61 μmol h−1). With the extension of the catalytic time, the hydrogen production rate of MoC/MAPbI3 reached 165.3 μmol h−1 after 16 h due to the effective separation and transfer of charge carriers between MoC and MAPbI3, showing excellent hydrogen evolution rate performance under visible light. In addition, the cycling stability of MoC/MAPbI3 did not decrease in multiple 4 h cycle tests. This study used the non-precious metal promoter MoC to modify MAPbI3, and provides a new idea for the synthesis of efficient MAPbI3-based composite catalysts. [ABSTRACT FROM AUTHOR]

NiFe-LDH/g-C3N4 (LDH/CN) heterostructures with different amounts of NiFe-LDH (LDH) were prepared by a hydrothermal method and characterized using different experimental techniques. Their photocatalytic properties were investigated using the degradation of tetracycline hydrochloride (TC) and the production of hydrogen from water splitting. Experimental results showed that the hydrogen production rate (780.5 μmol g−1 h−1) was 2.29 times that of pristine CN, and the TC removal rate (76.3%) of 1.8LDH/CN was 3.71 times that of CN. According to the detailed study of the structural, optical, and photoelectrochemical properties, a type II charge transfer mechanism was proposed to explain the improved photocatalytic performance of LDH/CN. [ABSTRACT FROM AUTHOR]

The study of environmentally friendly semiconductor photocatalysts has important practical significance for efficient photocatalytic hydrogen evolution. In this experiment, type II heterojunction NiCo-LDH/CeO2 was prepared by in situ loading, and the NiCo-LDH/CeO2 catalyst showed good activity under simulated sunlight irradiation. Under simulated visible light irradiation, its hydrogen production rate reached 2.7 mmol h−1 g−1, which was higher than that of NiCo-LDH (0.86 mmol h−1 g−1). Through a series of characterization data, it can be concluded that the heterojunction successfully constructed by the close contact between NiCo-LDH and CeO2 accelerates the separation of photogenerated electrons and holes and can effectively inhibit the recombination of the two so that more electrons are involved in the hydrogen evolution reaction. The material has good interfacial charge transfer performance, which improves the photocatalytic performance. This work can provide an effective method for the research and development of NiCo-LDH. [ABSTRACT FROM AUTHOR]

As a research hotspot, 2D-MoS2 has been regarded as a low-cost substitute for platinum, and has fascinated researchers worldwide. Two crystalline phases of MoS2, i.e. the metallic octahedral 1T phase and semiconducting trigonal prismatic 2H phase, have been extensively analysed. In comparison to 2H-MoS2, the 1T phase exhibits enhanced and unique physicochemical properties. Designing a structure with two-dimensional mixed-phase MoS2, i.e. 1T/2H-MoS2 nanosheets, via phase engineering for effective charge separation and migration has received growing interest in the field of photocatalytic hydrogen generation. In this study, by varying the wt% of ammonium bicarbonate via a facile hydrothermal technique, a series of 1T/2H-MoS2 nanosheets have been fabricated. The presence of the corresponding elements, the electronic environment, phase purity, morphology and phase distinction were confirmed by Raman, XPS, XRD and HRTEM analyses. Additionally, the impedance data and the photocurrent density of the photocatalysts verify the efficient charge separation and transfer phenomenon. In accordance with the electrochemical measurements, the developed mixed-phase MoS2 nanosheets exhibit a six times greater current density than 2H-MoS2. Furthermore, the highest response of photocatalytic hydrogen production is observed with the photocatalyst with 79% 1T phase, which is about 17 times greater than that of pristine 2H-MoS2 due to the enrichment of active sites on both the edges and basal plane as well as the enhanced electronic conductivity due to the 1T phase. This study indicates that with the construction of a heterophase, i.e. 1T/2H-MoS2 nanosheets, the photocatalytic hydrogen evolution capability can be boosted, providing new insights regarding these materials. [ABSTRACT FROM AUTHOR]

This is the first report on the application of InWO4 nanospheres in the field of photocatalysis. Tungstates have excellent thermal and chemical stability; in this work, we have successfully prepared an InWO4/CdS composite catalyst. Since the CB of InWO4 is more negative than that of CdS, InWO4 can act as a cocatalyst to promote the separation and transfer of photogenerated charges, thereby suppressing the recombination of photogenerated electron–hole pairs and significantly improving the performance of the InWO4/CdS composite, and the hydrogen production rate of InWO4/CdS reached 6146.63 μmol g−1 h−1, which was about 4.21 times that of pure CdS. Especially, the InWO4/CdS composite exhibits high photocatalytic stability. In addition, these properties are well characterized by SEM, TEM, XRD, XPS, UV-vis, BET, transient photocurrent and FT-IR analyses etc., and all the results showed good consistency with the hydrogen production experiment. [ABSTRACT FROM AUTHOR]

Improving the efficiency of charge separation is an important aspect in photocatalysis. In this work, the hybrid nanostructure of α-Ni(OH)2/Zn0.5Cd0.5S has been prepared by a simple two-step method for the first time. Here, designed/constructed with α-Ni(OH)2 over Zn–Cd–S, the catalyst efficiently boosts hydrogen evolution in photocatalytic hydrogen production. With a 25% content of α-Ni(OH)2 in the ZSN25 composite under visible light (λ≥ 420 nm) irradiation, remarkable hydrogen production of 22.45 mmol g−1 h−1 has been achieved. In addition, we found that the activities could be improved by means of controlling the formation of α-Ni(OH)2 species. The reason is that the interface between α-Ni(OH)2 and Zn0.5Cd0.5S provides a fast charge transfer channel to reduce the recombination of photogenerated carrier. Also, the formation of this interface is largely related to the content of α-Ni(OH)2. The Tafel slope, EIS and PL spectra support enhanced photocatalytic energy in the α-Ni(OH)2/Zn0.5Cd0.5S charge transfer state and faster hydrogen evolution kinetics. These nanocomposites of Zn0.5Cd0.5S modified by α-Ni(OH)2 are of great significance for renewable hydrogen generation technology. [ABSTRACT FROM AUTHOR]