Search

With the convergence of various broadcasting systems, the amount of content available in mobile terminals including IPTV has significantly increased. In this paper, we propose a system that enables users to schedule programs considering both section video clips and full video clips based on the user detection method with similar preference. And, since the system constituting the contents can be classified according to the program, the proposed method can store a program desired by the user, and thus create and schedule a kind of individual channel. Experimental results show that the proposed method has a higher prediction accuracy; this is accomplished by comparing existing channel recommendation methods with the program recommendation methods proposed in this paper. [ABSTRACT FROM AUTHOR]

Traffic state estimation from the floating car system is a challenging problem. The low penetration rate and random distribution make available floating car samples usually cover part space and time points of the road networks. To obtain a wide range of traffic state from the floating car system, many methods have been proposed to estimate the traffic state for the uncovered links. However, these methods cannot provide traffic state of the entire road networks. In this paper, the traffic state estimation is transformed to solve a missing data imputation problem, and the tensor completion framework is proposed to estimate missing traffic state. A tensor is constructed to model traffic state in which observed entries are directly derived from floating car system and unobserved traffic states are modeled as missing entries of constructed tensor. The constructed traffic state tensor can represent spatial and temporal correlations of traffic data and encode the multi-way properties of traffic state. The advantage of the proposed approach is that it can fully mine and utilize the multi-dimensional inherent correlations of traffic state. We tested the proposed approach on a well calibrated simulation network. Experimental results demonstrated that the proposed approach yield reliable traffic state estimation from very sparse floating car data, particularly when dealing with the floating car penetration rate is below 1%. [ABSTRACT FROM AUTHOR]

PubMed is a free search engine for biomedical literature accessed by millions of users from around the world each day. With the rapid growth of biomedical literature—about two articles are added every minute on average—finding and retrieving the most relevant papers for a given query is increasingly challenging. We present Best Match, a new relevance search algorithm for PubMed that leverages the intelligence of our users and cutting-edge machine-learning technology as an alternative to the traditional date sort order. The Best Match algorithm is trained with past user searches with dozens of relevance-ranking signals (factors), the most important being the past usage of an article, publication date, relevance score, and type of article. This new algorithm demonstrates state-of-the-art retrieval performance in benchmarking experiments as well as an improved user experience in real-world testing (over 20% increase in user click-through rate). Since its deployment in June 2017, we have observed a significant increase (60%) in PubMed searches with relevance sort order: it now assists millions of PubMed searches each week. In this work, we hope to increase the awareness and transparency of this new relevance sort option for PubMed users, enabling them to retrieve information more effectively. [ABSTRACT FROM AUTHOR]

Accurate and fast path computation is essential for applications such as onboard navigation systems and traffic network routing. While a number of heuristic algorithms have been developed in the past few years for faster path queries, the accuracy of them are always far below satisfying. In this paper, we first develop an agglomerative graph partitioning method for generating high balanced traverse distance partitions, and we constitute a three-level graph model based on the graph partition scheme for structuring the urban road network. Then, we propose a new hierarchical path computation algorithm, which benefits from the hierarchical graph model and utilizes a region pruning strategy to significantly reduce the search space without compromising the accuracy. Finally, we present a detailed experimental evaluation on the real urban road network of New York City, and the experimental results demonstrate the effectiveness of the proposed approach to generate optimal fast paths and to facilitate real-time routing applications. [ABSTRACT FROM AUTHOR]

The social functions of urbanized areas are highly dependent on and supported by the convenient access to public transportation systems, particularly for the less privileged populations who have restrained auto ownership. To accurately evaluate the public transit accessibility, it is critical to capture the spatiotemporal variation of transit services. This can be achieved by measuring the shortest paths or minimum travel time between origin-destination (OD) pairs at each time-of-day (e.g. every minute). In recent years, General Transit Feed Specification (GTFS) data has been gaining popularity for between-station travel time estimation due to its interoperability in spatiotemporal analytics. Many software packages, such as ArcGIS, have developed toolbox to enable the travel time estimation with GTFS. They perform reasonably well in calculating travel time between OD pairs for a specific time-of-day (e.g. 8:00 AM), yet can become computational inefficient and unpractical with the increase of data dimensions (e.g. all times-of-day and large network). In this paper, we introduce a new algorithm that is computationally elegant and mathematically efficient to address this issue. An open-source toolbox written in C++ is developed to implement the algorithm. We implemented the algorithm on City of St. George’s transit network to showcase the accessibility analysis enabled by the toolbox. The experimental evidence shows significant reduction on computational time. The proposed algorithm and toolbox presented is easily transferable to other transit networks to allow transit agencies and researchers perform high resolution transit performance analysis. [ABSTRACT FROM AUTHOR]

In peer-to-peer networks, application relays have been commonly used to provide various networking services. The service performance often improves significantly if a relay is selected appropriately based on its network location. In this paper, we studied the location-aware relay discovery and selection problem for large-scale P2P streaming networks. In these large-scale and dynamic overlays, it incurs significant communication and computation cost to discover a sufficiently large relay candidate set and further to select one relay with good performance. The network location can be measured directly or indirectly with the tradeoffs between timeliness, overhead and accuracy. Based on a measurement study and the associated error analysis, we demonstrate that indirect measurements, such as King and Internet Coordinate Systems (ICS), can only achieve a coarse estimation of peers’ network location and those methods based on pure indirect measurements cannot lead to a good relay selection. We also demonstrate that there exists significant error amplification of the commonly used “best-out-of-K” selection methodology using three RTT data sets publicly available. We propose a two-phase approach to achieve efficient relay discovery and accurate relay selection. Indirect measurements are used to narrow down a small number of high-quality relay candidates and the final relay selection is refined based on direct probing. This two-phase approach enjoys an efficient implementation using the Distributed-Hash-Table (DHT). When the DHT is constructed, the node keys carry the location information and they are generated scalably using indirect measurements, such as the ICS coordinates. The relay discovery is achieved efficiently utilizing the DHT-based search. We evaluated various aspects of this DHT-based approach, including the DHT indexing procedure, key generation under peer churn and message costs. [ABSTRACT FROM AUTHOR]

Gross primary production (GPP) is the Earth’s largest carbon flux into the terrestrial biosphere and plays a critical role in regulating atmospheric chemistry and global climate. The Moderate Resolution Imaging Spectrometer (MODIS)-MOD17 data product is a widely used remote sensing-based model that provides global estimates of spatiotemporal trends in GPP. When the MOD17 algorithm is applied to regional scale heterogeneous landscapes, input data from coarse resolution land cover and climate products may increase uncertainty in GPP estimates, especially in high productivity tropical ecosystems. We examined the influence of using locally specific land cover and high-resolution local climate input data on MOD17 estimates of GPP for the State of Hawaii, a heterogeneous and discontinuous tropical landscape. Replacing the global land cover data input product (MOD12Q1) with Hawaii-specific land cover data reduced statewide GPP estimates by ~8%, primarily because the Hawaii-specific land cover map had less vegetated land area compared to the global land cover product. Replacing coarse resolution GMAO climate data with Hawaii-specific high-resolution climate data also reduced statewide GPP estimates by ~8% because of the higher spatial variability of photosynthetically active radiation (PAR) in the Hawaii-specific climate data. The combined use of both Hawaii-specific land cover and high-resolution Hawaii climate data inputs reduced statewide GPP by ~16%, suggesting equal and independent influence on MOD17 GPP estimates. Our sensitivity analyses within a heterogeneous tropical landscape suggest that refined global land cover and climate data sets may contribute to an enhanced MOD17 product at a variety of spatial scales. [ABSTRACT FROM AUTHOR]

Quantum annealing is an experimental and potentially breakthrough computational technology for handling hard optimization problems, including problems of computer vision. We present a case study in training a production-scale classifier of tree cover in remote sensing imagery, using early-generation quantum annealing hardware built by D-wave Systems, Inc. Beginning within a known boosting framework, we train decision stumps on texture features and vegetation indices extracted from four-band, one-meter-resolution aerial imagery from the state of California. We then impose a regulated quadratic training objective to select an optimal voting subset from among these stumps. The votes of the subset define the classifier. For optimization, the logical variables in the objective function map to quantum bits in the hardware device, while quadratic couplings encode as the strength of physical interactions between the quantum bits. Hardware design limits the number of couplings between these basic physical entities to five or six. To account for this limitation in mapping large problems to the hardware architecture, we propose a truncation and rescaling of the training objective through a trainable metaparameter. The boosting process on our basic 108- and 508-variable problems, thus constituted, returns classifiers that incorporate a diverse range of color- and texture-based metrics and discriminate tree cover with accuracies as high as 92% in validation and 90% on a test scene encompassing the open space preserves and dense suburban build of Mill Valley, CA. [ABSTRACT FROM AUTHOR]