Search

The environmental issues caused by the impacts of synthetic plastics use and derived wastes are arising the attention to bio-based plastics, natural polymers produced from renewable resources, including agricultural, industrial, and domestic wastes. Bio-based plastics represent a potential alternative to petroleum-based materials, due to the insufficient availability of fossil resources in the future and the affordable low cost of renewable ones that might be consumed for the biopolymer synthesis. Among the polyhydroxyalkanoates (PHA), the polyhydroxybutyrate (PHB) biopolymer has been synthesized and characterized with great interest due to its wide range of industrial applications. Currently, a wide number of bacterial species from soil, activated sludge, wastewater, industrial wastes, and compost have been identified as PHB producers. This work has the purpose of isolating and characterizing PHB-producing bacteria from the agricultural soil samples of Argania spinosa in the south region of Morocco where the plant species is endemic and preserved. During this research, four heat-resistant bacterial strains have been isolated. Among them, two species have been identified as endospore forming bacteria following the Schaffer-Fulton staining method with Malachite green and the Methylene blue method. Black intracellular granules have been appreciated in microscopy at 100× for both strains after staining with Sudan black B. The morphological and biochemical analyses of the isolates, including sugar fermentation and antibiotic susceptibility tests, preliminarily identified the strains 1B and 2D1 belonging to the genus Serratia and Proteus, respectively. [ABSTRACT FROM AUTHOR]

The Black Steel slag (Ss) and phosphogypsum (PG) are industrial wastes produced in Morocco. In order to reduce these two wastes and to evaluate their pozzolanic reactivity in the presence of water, they were incorporated into bentonite (B) mixed with lime (L). The studied mixtures (BLW, BL–PG–W and BL–PG–Ss–W) were analyzed by X-ray diffraction, Infrared spectroscopy, Raman spectroscopy and SEM/EDX analysis. Compressive strength tests were performed on hardened specimens. The results obtained show that the hydration kinetics of the B–L–W and B–L–PG–W mixtures are slow. The addition of PG to a bentonite––lime mixture induces the formation of new microstructures such as hydrated calcium silicate (C–S–H) and ettringite, which increases the compressive strength of the cementitious specimens. The addition of the Ss to a mixture composed of 8%PG and 8%L–B accelerates the kinetics of hydration and activates the pozzolanic reaction. The presence of C2S in the slag helps to increase the mechanical strength of the mixture B–L–PG–Ss. The compressive strength of the mixtures BL–W, BL–PG–W and BL–PG–Ss–W increases from 15 to 28 days of setting. After 28 days of setting, 8% of Sc added to the mixture 8% PG–8%L–B is responsible for an increase of the compressive strength to 0.6 MPa. [ABSTRACT FROM AUTHOR]

Featured Application: In this paper waste bottom ash from a thermal power station was treated with lime and sand. This improves certain material characteristics leading to a potential use in a subbase in road construction. Industrial waste causes environmental, economic, and social problems. In Morocco, the Jorf Lasfar Thermal Power Station produces two types of coal ash with enormous quantities: fly ash (FA) and Bottom ash (BA). FA is recovered in cement while BA is stored in landfills. To reduce the effects of BA disposal in landfills, several experimental studies have tested the possibility of their recovery in the road construction, especially as a subbase. In the first phase of this study, the BA underwent a physicochemical and geotechnical characterization. The results obtained show that the BA should be treated to improve its mechanical properties. The most commonly used materials are lime and cement. In the selected low-cost treatment, which is the subject of the second phase of the study, lime is used to improve the low pozzolanicity of BA while calcarenite sand is used to increase the compactness. Several mixtures containing BA, lime, and calcarenite sand were prepared. Each of these mixtures was compacted in modified Proctor molds and then subjected to a series of tests to study the following characteristics: compressive strength, dry and wet California Bearing Ratio (CBR), dry density and swelling. The composition of each mixture was based on an experimental design approach. The results show that the values of the compressive strength, the dry density, and the CBR index have increased after treatment, potentially leading to a valorization of the treated BA for use in a subbase. [ABSTRACT FROM AUTHOR]