Search

Geopolymer (GP) concrete is a novel construction material that can be used in place of traditional Portland cement (PC) concrete to reduce greenhouse gas emissions and effectively manage industrial waste. Fly ash (FA) has long been utilized as a key constituent in GPs, and GP technology provides an environmentally benign alternative to FA utilization. As a result, a thorough examination of GP concrete manufactured using FA as a precursor (FA-GP concrete) and employed as a replacement for conventional concrete has become crucial. According to the findings of current investigations, FA-GP concrete has equal or superior mechanical and physical characteristics compared to PC concrete. This article reviews the clean production, mix design, compressive strength (CS), and microstructure (Ms) analyses of the FA-GP concrete to collect and publish the most recent information and data on FA-GP concrete. In addition, this paper shall attempt to develop a comprehensive database based on the previous research study that expounds on the impact of substantial aspects such as physio-chemical characteristics of precursors, mixes, curing, additives, and chemical activation on the CS of FA-GP concrete. The purpose of this work is to give viewers a greater knowledge of the consequences and uses of using FA as a precursor to making effective GP concrete. [ABSTRACT FROM AUTHOR]

A main global challenge is finding an alternative material for cement, which is a major source of pollution to the environment because it emits greenhouse gases. Investigators play a significant role in global waste disposal by developing appropriate methods for its effective utilization. Geopolymers are one of the best options for reusing all industrial wastes containing aluminosilicate and the best alternative materials for concrete applications. Waste wood ash (WWA) is used with other waste materials in geopolymer production and is found in pulp and paper, wood-burning industrial facilities, and wood-fired plants. On the other hand, the WWA manufacturing industry necessitates the acquisition of large tracts of land in rural areas, while some industries use incinerators to burn wood waste, which contributes to air pollution, a significant environmental problem. This review paper offers a comprehensive review of the current utilization of WWA with the partial replacement with other mineral materials, such as fly ash, as a base for geopolymer concrete and mortar production. A review of the usage of waste wood ash in the construction sector is offered, and development tendencies are assessed about mechanical, durability, and microstructural characteristics. The impacts of waste wood ash as a pozzolanic base for eco-concreting usages are summarized. According to the findings, incorporating WWA into concrete is useful to sustainable progress and waste reduction as the WWA mostly behaves as a filler in filling action and moderate amounts of WWA offer a fairly higher compressive strength to concrete. A detail study on the source of WWA on concrete mineralogy and properties must be performed to fill the potential research gap. [ABSTRACT FROM AUTHOR]

The construction industry is the world's largest emitter of greenhouse gases. The CO2 emission levels in the atmosphere are already reaching a tipping point and could cause severe climate change. An important element is the introduction of a technology that allows for the capture and sequencing of carbon dioxide levels, reducing both emissions and the carbon footprint from the production of Portland cement and cement-based building materials. The European Union has started work on the European Climate Law, establishing the European Green Deal program, which introduces the achievement of climate neutrality in the European Union countries. This includes a new policy of sustainable construction, the aim of which is to develop products with a closed life cycle through proper waste management. All efforts are being made to create generated waste and thus to support their production and/or use as substitutes for raw materials to produce biocomposites. This article reviews environmental issues and characterizes selected waste materials from the agri-food, mineral, and industrial sectors with specific properties that can be used as valuable secondary raw materials to produce traditional cements and biocomposite materials, while maintaining or improving their mechanical properties and applications. [ABSTRACT FROM AUTHOR]

35207993 10 Cheng Z., Cheng X., Xie Y., Ma Z., Liu Y. Strength Tests and Numerical Simulations of Loess Modified by Desulfurization Ash and Fly Ash. This Special Issue, titled "Research and Development of Building Materials Based on Industrial Waste", is focused on the preparation and description of the properties of new building materials based on industrial waste that are to be used in practice in civil engineering and engineering construction. 35009234 12 Liu H., Tian Z., Fan H. A Study on the Relationships between Water Film Thickness, Fresh Properties, and Mechanical Properties of Cement Paste Containing Superfine Basalt Powder (SB). [Extracted from the article]

The fabrication of bricks commonly consumes relatively high natural resources. To reduce the carbon footprint in the brick production industry, repurposing industrial wastes in the making of sustainable bricks is a recent trend in research and application. Local wastes, such as oil palm shell (OPS), palm oil fuel ash (POFA), and quarry dust (QD), are massively produced annually in the palm oil-exporting countries. Moreover, QD from mining industries is hazardous to both water and air quality. For better waste management in marching towards sustainability, these wastes should be given their second life as construction materials. Therefore, this paper investigates the possibility of incorporating agro-industrial wastes into the brick mixture by examining their properties by means of several standardized tests. For the mix design, a 100% replacement of coarse aggregate with OPS, 20% replacement of cement with POFA, 20% cement weight of limestone as admixture, and 0 to 50% replacements of fine aggregate with QD are experimentally considered. The optimum mix of these wastes is preliminarily determined by focusing on high compressive strength as an indicator. Other examinations include splitting tensile, flexural strength, water absorption, and efflorescence tests. Although the agro-industrial waste cement brick is 18% lower in the strength to weight ratio compared to that of conventional, it is observed that it has better late strength development due to its POFA pozzolanic properties. Moreover, the proposed green cement brick is further checked for compliance with several standards for feasible use in the construction industry. Financially, the cost for the brick with the new mix design is almost equivalent to that of conventional. Hence, this green cement brick is reasonable to be employed in the construction industry to promote material sustainability for better waste management. [ABSTRACT FROM AUTHOR]

Supplementary cementitious materials (SCMs) in industrial waste and by-products are routinely used to mitigate the adverse environmental effects of, and lower the energy consumption associated with, ordinary Portland cement (OPC) manufacture. Many such SCMs, such as type F coal fly ash (FA), are naturally occurring radioactive materials (NORMs). 226Ra, 232Th and 40K radionuclide activity concentration, information needed to determine what is known as the gamma-ray activity concentration index (ACI), is normally collected from ground cement samples. The present study aims to validate a new method for calculating the ACI from measurements made on unground 5 cm cubic specimens. Mechanical, mineralogical and radiological characterisation of 28-day OPC + FA pastes (bearing up to 30 wt % FA) were characterised to determine their mechanical, mineralogical and radiological properties. The activity concentrations found for 226Ra, 212Pb, 232Th and 40K in hardened, intact 5 cm cubic specimens were also statistically equal to the theoretically calculated values and to the same materials when ground to a powder. These findings consequently validated the new method. The possibility of determining the activity concentrations needed to establish the ACI for cement-based materials on unground samples introduces a new field of radiological research on actual cement, mortar and concrete materials. [ABSTRACT FROM AUTHOR]

The recycling and reuse of solid wastes can be considered important challenges for civil and environmental applications in the frame of a more sustainable model of development and the consumption of new resources and energy [[1]]. This silane-treated cellulose aerogel exhibited high absorption capacities of 1091 ± 19.6%, 1237 ± 17.6% and 1247 ± 21.1% by weight gain for waste motor oil, diesel and gasoline, respectively. For this purpose, simulated Ce-bearing radioactive soil waste was immobilized by the self-propagating high-temperature synthesis (SHS) of forms containing 5-25% of contaminated material and which were characterized by the analysis of phase composition, microstructure and chemical durability. [Extracted from the article]