Search

Flooding occurrences have become increasingly severe, posing a serious danger to end-user safety and bridge resilience. As flood fragility assessment is a valuable tool for promoting the resilience of bridges to climate change, it is of great importance to push the development of such methods. However, flood fragility has not received as much attention as seismic fragility despite the significant amount of damage and costs resulting from flood hazards. There has been little effort to estimate the flood fragility of bridges considering various flood-related factors and the corresponding failure modes. To this end, a fragility-based approach that can explicitly address the scour-hole geometry and flood-induced lateral load is presented. First, a three-dimensional finite-element model with pile foundations and surrounding soil was established to estimate the failure mode under various flood scenarios. The loadings on pile foundations were characterized by vertical loading from the superstructure, horizontal loading from the flood-induced lateral load, and the scour effect simulated through a time-history analysis. Then, all potential failure modes of bridge pile foundations in various flood scenarios were summarized. Based on extensive parameter investigations using the deterministic method, the dominant failure mode of penetration failure was determined, and a failure envelope was fitted to guide the design of the pile foundation. Upon establishing the failure mode, a probabilistic fragility analysis considering uncertainties in hydraulic, structural, and geological parameters was finally conducted using the Latin hypercube sampling (LHS) method. The results showed the effects of variation on the fragility of the pile foundation, highlighting that the deterministic analysis without considering the uncertainties in model parameters leads to underestimating the risk due to the penetration failure and the significant influence region. [ABSTRACT FROM AUTHOR]

This document discusses a research paper that proposes a modified method for evaluating the stability of deep excavations in soft clays. The discussion raises concerns about the proposed method and questions the assumptions made by the authors. It suggests alternative explanations for the observed behavior of excavations in soft clays and criticizes the models used in the study for not accurately representing actual ground movement patterns caused by excavation. The author invites the study authors to respond to these criticisms. [Extracted from the article]

Although three-dimensional finite-element analysis has been introduced to foundation design for years, simplified computer-based calculations based on the spring analogy of soils and structural elements are also frequently used in many engineering projects. Using coefficients of subgrade reactions and pile stiffness is a straightforward way to design and analyze a piled raft foundation. This paper discusses the determination of the coefficients of pile reactions for embedded piled raft foundations in soft clays subjected to vertically uniform loads through a series of finite-element analyses. The geologic property was assumed to be composed of homogeneous soft clays with the shear-wave velocities varying at 100–140 m/s. The foundations with a square raft ranging from 16 to 36 m and embedment depths of 8 and 12 m were studied. Load intensity approximating 1.5 times the excavated soil pressures was considered where the maximum uniform load was applied to the foundation. The foundation settlements and reactions of the piles were obtained first from a three-dimensional finite-element analysis. For design convenience, the dimensionless pile displacements, pile reactions, and coefficients of pile reactions were developed and presented in plots. The embedment depth-to-raft size ratio, pile slenderness ratio, and pile-to-pile spacing distance-to-pile diameter ratio were examined to find their optimized correlation. Finally, a design example was given to verify the proposed suggestions. We conclude that the proposed method can be an alternative to the piled raft foundation design. [ABSTRACT FROM AUTHOR]

Torsional load arising from horizontal load eccentricity has a significant effect on the ultimate horizontal load carrying capacity of tripod bucket foundations in clay. In this paper, the effect of torsional load on the failure mechanism and ultimate horizontal capacity of tripod bucket foundations in undrained clay was studied using 3D finite-element analyses. Three single buckets were connected to form a rigid tripod bucket foundation system. Two different shear strength profiles, that is, uniform and linearly increasing with depth were considered. A detailed parametric study was conducted by varying the bucket spacing and embedment depth to explore the effects of different governing parameters. All the analyses were carried out for smooth and rough interface conditions. The influence of torsion on horizontal capacity is presented in the form of combined horizontal-torsional (H-T) failure envelopes. Reductions in ultimate horizontal capacity with increasing load eccentricity were quantified for the ease of practice. Finally, an expression for estimating combined H-T capacity is provided as a function of normalized spacing and embedment. Additional analyses were also performed to evaluate the effect of moment arising from vertical eccentricity on the combined H-T capacity. [ABSTRACT FROM AUTHOR]

This document is a discussion of a research paper titled "Numerical Study of the Effect of Ground Improvement on Basal Heave Stability for Deep Excavations in Normally Consolidated Clays" by Ari Surya Abdi and Chang-Yu Ou. The authors conducted a three-dimensional finite-element method analysis to investigate the impact of ground improvement on the stability of deep excavations in soft clays. They proposed a modified Terzaghi's method based on their findings. However, the discussion raises concerns about the reliability of the authors' numerical simulation results and suggests the need for validation through field or experimental data. It also questions the use of an elastic-perfectly plastic Mohr-Coulomb model and the absence of mention of dewatering in the original paper. The discussion further examines the displacement patterns and deflection profiles of retaining walls during excavation. The author requests a response from the original authors. [Extracted from the article]

This summary discusses the article "Installation Effects and Behavior of a Driven Prestressed High-Strength Concrete Nodular Pile in Deep Saturated Soft Clay" by Jian-lin Yu, Jia-jin Zhou, Ri-hong Zhang, and Xiao-nan Gong. The authors conducted a full-scale experimental study to investigate the behavioral characteristics of a driven prestressed high-strength concrete (PHC) nodular pile in deep-saturated soft clay. They compared the installation effects and shaft frictional resistance of the nodular pile to a similar nonnodular pile. The study found that nodular piles had higher load-bearing capacity and improved shaft resistance compared to nonnodular piles. The authors also discussed the influence of pile installation on the surrounding soil and provided information on pile spacing and pore-water pressure. [Extracted from the article]

Time-dependent response of piled raft foundations (PRFs) in saturated, normally consolidated and moderately overconsolidated clayey soils under the single-drainage condition is investigated using three-dimensional, elastoplastic finite-element (FE) analysis with the modified cam clay (MCC) soil constitutive model. Four different types of clay (Boston Blue Clay, San Francisco Bay Mud, London Clay, and Shanghai Clay) with different values of overconsolidation ratio (OCR) (OCR=1 , 2, and 5) and 20 different configurations of rectangular PRFs are considered for the study. The settlement response and load sharing of PRFs are investigated. Regression analyses are performed with the FE analysis results to obtain fitted equations for immediate settlement, primary consolidation settlement, and degree of consolidation of PRFs. These equations are applicable to PRFs with cast in situ bored piles similar in size to those considered in this study. The proposed equations can be used to estimate time-dependent PRF settlement in normally consolidated and moderately overconsolidated clay as part of preliminary design calculations. [ABSTRACT FROM AUTHOR]

Time-dependent settlements of piled raft foundations embedded in consolidating clays were studied using three-dimensional (3D) finite-element analysis and critical state-based soil constitutive modified Cam-Clay (MCC) model. In this study, different small to large rectangular rafts connected to circular bored cast-in-situ piles resting on four different types of clays and with varying overconsolidation ratios (OCRs) (1, 2, and 5) for each clay under a single drainage condition were analyzed. The influence of various piled raft parameters (pile length, pile spacing, pile diameter, raft thickness) and soil parameters (Poisson's ratio of soil, soil critical state parameters, stress history of soil or OCR) on immediate and consolidation settlements of piled rafts were investigated. The detailed parametric study shows that critical state parameters and soil elastic properties have important roles in piled raft immediate and consolidation settlements. However, the pattern of parametric influence on immediate settlement and consolidation settlement is different. To capture the total settlement at the end of primary consolidation, a simple and quick calculation method for estimating the average soil subgrade modulus below the piled raft in consolidating clays is proposed through regression analysis and defining a combined influence parameter based on soil parameters, area ratio, and normalized loading. The results of the proposed method were compared with five case studies of piled raft foundations in various normally or overconsolidated clays showing satisfactory matches. It is believed that the proposed method will be very useful for design practitioners to get a quick estimate for the overall settlement of piled raft at the initial design stage. [ABSTRACT FROM AUTHOR]

Difficulties in obtaining high-quality soil samples from offshore sites and heavy involvement of lab testing and engineering judgment have necessitated increasing reliance on in situ penetrometer tests, giving continuous penetration resistance profiles. This paper reports a framework for estimating spudcan penetration resistance directly from continuous resistance profile of a full-flow penetrometer (T-bar) test in single-layer clays and calcareous silts. The framework was validated chiefly against centrifuge test data, supplemented by some reported field data. [ABSTRACT FROM AUTHOR]