Search

The coronavirus disease 2019 (COVID-19) pandemic is a case that can be used as a biochemistry learning resource in relation to the topic of viruses. Learning to use cases will be effective if students are assigned to produce reports, articles, or other scientific papers. Self-assessment can be used to assess the competencies that have been learnt in the writing process. This study aims to analyze the scientific papers and self-assessment of students using the COVID-19 pandemic case. It includes qualitative research with scientific paper and self-assessment questionnaire analyses. The research sample was chemistry education study program students (N = 57) following biochemistry course, out of a population of 87 students. The results show that the students have a good understanding of explaining COVID-19. Self-assessment analysis shows that 80% of the students responded positively to eight statements; those who gave positive responses to each questionnaire statement were able to produce scientific papers. Good self-assessment is in line with the ability of students to compile good scientific papers.

Japanese papers (JPs) are among the most common materials used for the restoration of historical papers. However, they have low transparency and may structure the paper surface. To overcome the limitations of JPs, in the present work films of cellulose nanofibers with and without lignin (LCNFs and CNFs, respectively) were explored. For this, chemically different LCNFs (carboxylated by TEMPO-mediated oxidation using variable oxidant amount and sulfated with deep eutectic solvent) and two reference CNFs were produced from Eucalyptus kraft pulps. Lignin slightly hindered the introduction of carboxyl groups into the cellulose structure, but did not affect the incorporation of sulfate groups. (L)CNFs gave films with better mechanical properties than those determined for three types of JP (tensile strength of 79–142 MPa (±11) vs 3.5–13.0 MPa (±0.4) and Young's modulus of 4900–5900 MPa (±300) vs 240–1800 MPa (±70)). Additionally, the (L)CNF films exhibited lower water vapor transmission rates (132–312 g.m−2.day−1) compared to the JPs (685–719 g.m−2.day−1), and a higher transparency (up to 89% and ≤82% for JPs). Except for the thermal stability, all properties studied favored (L)CNF films over JPs, indicating their strong potential for restoration/conservation applications. This systematic comparison between the properties of (L)CNF films and JPs has never been conducted before.

This work reports on the development of an analyte sampling strategy on a plasmonic substrate to amplify the detection capability of a dual analytical system, paper spray ionization–mass spectrometry (PSI-MS) and surface-enhanced Raman spectroscopy (SERS). While simply applying only an analyte solution to the plasmonic paper results in a limited degree of SERS enhancement, the introduction of plasmonic gold nanoparticles (AuNPs) greatly improves the SERS signals without sacrificing PSI-MS sensitivity. It is initially revealed that the concentration of AuNPs and the type of analytes highly influence the SERS signals and their variations due to the “coffee ring effect” flow mechanism induced during sampling and the degree of the interfacial interactions (e.g., van der Waals, electrostatic, covalent) between the plasmonic substrate and analyte. Subsequent PSI treatment at high voltage conditions further impacts the overall SERS responses, where the signal sensitivity and homogeneity significantly increase throughout the entire substrate, suggesting the ready migration of adsorbed analytes regardless of their interfacial attractive forces. The PSI-induced notable SERS enhancements are presumably associated with creating unique conditions for local aggregation of the AuNPs to induce effective plasmonic couplings and hot spots (i.e., electromagnetic effect) and for repositioning analytes in close proximity to a plasmonic surface to increase polarizability (i.e., chemical effect). The optimized sampling and PSI conditions are also applicable to multi-analyte analysis by SERS and MS, with greatly enhanced detection capability and signal uniformity.

In this study, we designed three promising platforms based on metal–organic frameworks (MOFs) to develop paper-based analytical devices (PADs) for biosensing applications. PADs have become increasingly popular in field sensing in recent years due to their portability, low cost, simplicity, efficiency, fast detection capability, excellent sensitivity, and selectivity. In addition, MOFs are excellent choices for developing highly sensitive and selective sensors due their versatility for functionalizing, structural stability, and capability to adsorb and desorb specific molecules by reversible interactions. These materials also offer the possibility to modify their structure and properties, making them highly versatile and adaptable to different environments and sensing needs. In this research, we synthesized and characterized three different amino-functionalized MOFs: UiO-66-NH2 (Zr), MIL-125-NH2 (Ti), and MIL-101-NH2 (Fe). These MOFs were used to fabricate PADs capable of sensitive and portable monitoring of alkaline phosphatase (ALP) enzyme activity by laser-induced fluorescence (LIF). Overall, amino-derivated MOF platforms demonstrate significant potential for integration into biosensor PADs, offering key properties that enhance their performance and applicability in analytical chemistry and diagnostics.

As a significant biomarker during the apoptosis process, cytochrome c (Cyt c) is considered as a critical component in the inherent apoptotic pathway, but the simple and portable detection still remains challengeable. In this work, a portable and visual sensing platform for Cyt c was developed based upon the fluorescence quenching of graphene quantum dots (GQDs), which could be finished within a few seconds. Herein, the absorption spectrum of Cyt c matched the emission spectrum of GQDs well, which could cause the fluorescence quenching of GQDs via the inner filter effect (IFE) in the range of 1–50 μg/mL with the limit of detection as low as 0.1 μg/mL. Furthermore, the intracellular Cyt c was imaged to observe the apoptosis process of cancer cells induced by staurosporine. To achieve the portable and visual detection of Cyt c, GQDs were deposited on the filter paper to form the solid platform, which displayed a gradual fluorescence quenching when different concentrations of Cyt c were present. Compared to the conventional methods, the proposed assay is low-cost, fast, portable, and visual, which will be useful for the investigation of mitochondrial dysfunction and apoptotic cell death.

The development of simple and accurate detection of uracil-DNA glycosylase (UDG) is of great significance for early clinical diagnosis and biomedical research. Here, we on the first effort introduced the uracil bases into the rolling circle amplification (RCA) reaction to produce the functionalized pure DNA hydrogel (PDH) for UDG detection. During RCA process, methylene blue (MB) molecules as the indicators were encapsulated into PDH. The addition of UDG can remove the uracil bases of PDH to generate abasic sites, which are further cleaved with the assistance of apurinic/apyrimidinic endonuclease (APE), thus resulting in the dissociation of PDH to release blue MB. By combining with the paper analytical devices as the signal readout platform, a colorimetric and electrochemical dual-signal biosensor was constructed for convenient and accurate detection of UDG. The proposed MB@PDH-based dual-signal sensing system exhibited good selectivity and high sensitivity with a detection limit of 6.4 × 10−4 U/mL (electrochemical method). It was also demonstrated that this sensing system showed excellent performance in UDG inhibitor screening, thus providing great potential in UDG-related disease diagnosis and drug discovery.

Zacharias Dische's discovery of feedback inhibition in metabolism was one of the most important in the history of biochemistry. However, his paper was written and published under very difficult circumstances in wartime and passed almost completely unnoticed. It is almost never cited, and the discovery itself is usually attributed to later work of others. Here I provide a discussion of Dische's work, a translation of his paper into English, and a transcription of the original French version, which is almost unobtainable anywhere., (Copyright © 2020. Published by Elsevier B.V.)

Nobel laureate Aziz Sancar writes about his decades-long relationship with the Journal of Biological Chemistry. Since 1984, he has published 100 papers in JBC, including this "Reflections.", Competing Interests: Conflict of interest The author declares no conflict of interest with the contents of this article., (Copyright © 2020 The Author. Published by Elsevier Inc. All rights reserved.)

Supramolecular systems based on chitosan and cellulose nanofibers (CNFs) with a different surface modification (TEMPO-oxidation and carboxymethylation) were investigated and utilized for the functional consolidation of paper. Prior to the paper consolidation, the interactions between chitosan and CNFs dispersed in aqueous solvent were studied. It was detected that the peculiar surface functionalization of nanocellulose is crucial to control the chitosan/CNFs electrostatic attractions and, consequently, the entropic/enthalpic contributions and the stoichiometry of the biopolymer adsorption onto the cellulose nanofibers. Dynamic Light Scattering and rheological experiments revealed that the presence of biopolymeric chains on the CNFs surface favors the entanglement and the aggregation between the nanofibers reinforcing their network. It was observed that chitosan and nanocellulose exhibit synergetic effects on the paper consolidation in terms of reinforcing action, surface hydrophobization and enhancement of the fire-resistance. In conclusion, this paper demonstrates that the electrostatic interactions between chitosan and functionalized nanocellulose drive the formation of hybrid fillers suitable for paper consolidation. Chitosan coated CNFs possess an improved capacity to penetrate the paper structure causing an enhancement of the mechanical resistance and surface hydrophobization. Moreover, chitosan/CNFs create a protective barrier for heat transfer that prevents the paper combustion.

Within the domain of starch modification, the study delved into cationization of wheat starch through a laboratory-scale twin-screw extruder, exploring various processing conditions. Cationic starch, a crucial component for enhancing paper attributes like dry strength and printability, took center stage. The focus shifted towards integration into papermaking, investigating the transformative potential of reactive extrusion. By contrasting it with conventional dry-process methodology, innovative strides were unveiled. The study extended to pilot-scale extrusion, bridging the gap between laboratory experimentation and potential industrial implementation. Infused with scientific rigor, the investigation navigated the benefits brought about by reactive extrusion. Empirical insights highlighted a significant reduction in the intrinsic viscosity of extruded starch, decreasing from 170 mL·g−1 (native starch) to 100 mL·g−1 at a specific mechanical energy (SME) input of 800 kWh·t−1, demonstrating remarkable stability despite increased mechanical treatment. Moreover, beyond the critical threshold of 220 kWh·t−1, retention efficiency reached a stable plateau at 78%. The study revealed that utilizing a larger extruder slightly improved the mechanical properties of the paper, emphasizing the advantage of scaling up the production process and the consistency of results across different extruder sizes.

The scientific publication landscape is changing quickly, with an enormous increase in options and models. Articles can be published in a complex variety of journals that differ in their presentation format (online-only or in-print), editorial organizations that maintain them (commercial and/or society-based), editorial handling (academic or professional editors), editorial board composition (academic or professional), payment options to cover editorial costs (open access or pay-to-read), indexation, visibility, branding, and other aspects. Additionally, online submissions of non-revised versions of manuscripts prior to seeking publication in a peer-reviewed journal (a practice known as pre-printing) are a growing trend in biological sciences. In this changing landscape, researchers in biochemistry and molecular biology must re-think their priorities in terms of scientific output dissemination. The evaluation processes and institutional funding for scientific publications should also be revised accordingly. This article presents the results of discussions within the Department of Biochemistry, University of São Paulo, on this subject.

Nowadays, mycotoxin contamination in cereals and wastewater exposes a safety hazard to consumer health. This work describes the design of a simple, low-cost, and sensitive origami microfluidic paper-based device using electrochemical detection for zearalenone determination. The microfluidic immunosensor was designed on a paper platform by a wax printing process. The graphitized carbon working electrode modified with carbon nanohorns-decorated nanoporous gold showed a higher surface area, sensitivity, and adequate analytical performance. Electrodes were characterized by scanning electron microscopy, energy-dispersive spectroscopy, and cyclic voltammetry. The determination of zearalenone was carried out through a competitive immunoassay using specific antibodies immobilized by a covalent bond on the electrode surface. In the presence of HRP-labeled enzyme conjugate, substrate, and catechol, zearalenone was detected employing the developed immunosensor by applying −0.1 V to the working electrode vs silver as a pseudo-reference electrode. A calibration curve with a linear range between 10 and 1000 µg Kg−1 (R2 = 0.998) was obtained, and the limit of detection and quantification for the electrochemical immunosensor were 4.40 and 14.90 µg Kg−1, respectively. The coefficient of variation for intra- and inter-day assays was less than 5%. The selectivity and specificity of the sensor were evaluated, comparing the response against zearalenone metabolites and other mycotoxins that could affect the corn samples. Therefore, origami is a promising approach for paper-based electrochemical microfluidic sensors coupled to smartphones as a rapid and portable tool for in situ mycotoxins detection in real samples.

In this paper, a MnO2 nanowire (MnO2-NW) modified carbon paper electrode (CP) was developed as a novel electrochemical sensor for the sensitive determination of tetrabromobisphenol A (TBBPA). The MnO2 nanowire was prepared by a hydrothermal synthesis method, and the morphology and structure of MnO2 were characterized using scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The electrochemical performance of TBBPA on MnO2-NW/CP was investigated by cyclic voltammetry, and the result confirmed that MnO2-NW/CP exhibited excellent sensitivity for the determination of TBBPA due to the high specific surface area and good electrical conductivity of the nanowire-like MnO2. Moreover, the important electrochemical factors such as pH value, incubation time and modified material proportion were systematically studied to improve the determination sensitivity. The interferences from similar structure compounds on TBBPA have also been investigated. Under the optimal conditions, MnO2-NW/CP displayed a linear range of 70~500 nM for TBBPA with a detection limit of 3.1 nM. This was superior to some electrochemical methods in reference. The work presents a novel and simple method for the determination of TBBPA.

Publishing English papers in journals listed in Science Citation Index (SCI) has become a requirement for degree conferment for doctoral science students at many universities in China. The publication requirement engenders high pressure for doctoral students and their supervisors and shapes the politics of the relationship between the two parties. This is illustrated in the present paper which reports a study conducted at a prestigious university in east China. Focusing on the case of a research group in biochemistry led by an expert writer (the supervisor), the study aimed to find out, from the supervisor's perspective, what revising papers for the students means to him, and what the students learn as a result of their papers being revised. It is shown that the students depend on the supervisor to meet the publication requirement, and the supervisor believes an average student cannot write a publishable paper. The paper discusses the disempowering effect of the publication requirement, and concludes that there is a role for a course on academic English writing, and that the focus on "publishing SCI papers or no degree" should be shifted at the policy level and long-term planning should go into the training of EAP-qualified language professionals.

Paper-based sensors overcome the drawbacks of conventional sensors in terms of their flexibility, portability, and stability compared to conventional sensors. Moreover, as a noninvasive bodily fluid, saliva contains various biomarkers related to physical status, which makes it perfectly matched with to use of paper-based sensors to manufacture a convenient and inexpensive disposable sensing device. This review focuses on the recent advances and progress in the design of paper-based salivary sensors and their applications. The first part mainly discusses various paper-based sensors and their advanced compositions, including dipstick assay, lateral flow assay, and microfluidic analytical device. Different detection methods in salivary biomarker detection are specially introduced in the secondary section, then their multiple potential applications and prospects are summarized. The sensor has excellent advantages for saliva detection, provides a reliable platform for point-of-care tests and telemedicine, and epically promotes the development of the medical Internet of Things.

Developing a convenient detection method for dopamine holds a significant incentive due to its high clinical significance. Herein, we synthesize crystalline MnOOH nanowires (MNWs) via a simple solvothermal treatment of KMnO4 and demonstrate that they possess excellent oxidase-like activity owing to the presence of pure Mn3+ sites on the MNWs. Particularly, MNWs catalyze the rapid oxidation of dopamine into aminochromes, which show a vivid brown color. The dopamine oxidase-like activity of MNWs follows the typical Michaelis–Mentenkinetics with excellent storage stability. Based on the affirmative catalytic features, a paper dipstick incorporating MNWs in the detection zone is constructed for the one-step colorimetric detection of target dopamine. By immersing the dipstick into the sample solution for 30 min, the sample spontaneously moves to the detection zone due to capillary force, yielding a brown color proportional to the amount of dopamine, which is quantified from an image acquired using a smartphone. With the MNW-containing solution-based assay and MNW-incorporated paper dipstick, dopamine is successfully determined with high selectivity, sensitivity, and detection precision when using spiked human serum and pharmaceutical dopamine injection samples, respectively. Successful analytical values such as the dynamic linear ranges of 3–60 μM and 0.05–7 mM are achieved with the solution-based assay and paper dipstick, respectively, along with excellent detection accuracy (95–99%) and precision (1.0–3.1%). Hence, we developed a simple and efficient nanozyme-based paper dipstick biosensor for dopamine that can be used in point-of-care testing environments.

Paper-based diagnostics offer a promising alternative to traditional diagnostic methods for point-of-care use due to their low cost, ease of use, portability, rapid results, versatility, and low environmental impact. While paper-based serology tests in the form of lateral flow assays can provide rapid test results for past pathogen exposure, they currently lack the accuracy and sensitivity offered by molecular diagnostic tests such as the polymerase chain reaction (PCR). Loop-mediated isothermal amplification (LAMP)—an isothermal nucleic acid amplification test (NAAT)—provides PCR-like performance while simultaneously reducing the instrumentation and assay complexity associated with PCR. In this review, we discuss a newly emerging class of paper-based LAMP platforms that integrates the versatility of paper microfluidics with the accuracy of NAATs. Since its first adoption in 2015, we have discussed all paper-based LAMP platforms in terms of the paper substrates, reagent incorporation techniques, paper platform design, heating hardware, detection methods, and sensitivity and specificity of paper-based LAMP assays. We conclude by identifying the current challenges and future prospects of paper-based NAATs.

This study proposes a low-cost, portable paper-fluidic vertical flow assay bacterium counter with high accuracy. We designed sensors with low fabrication costs based on e-beam evaporation and three-dimensional printing based on the impedance measurement principle. Interdigitated (IDT) electrodes were coated on the filter membrane by e-beam evaporation with a shadow mask. We could print wafer-scale frames with low melting temperature three-dimensional-printing materials for confining liquid bacterial samples within the IDT sensing region. This novel fabrication technique significantly reduced the chip’s cost to less than 1% of that of silicon-based chips. Two equivalent circuit models were proposed for different concentration ranges to analyze the principle of paper-based impedance bacterial sensors. We proposed an improved model based on the Randles model for low concentrations by considering the leaky double-layer capacitor effect and spherical diffusion from the nano-structural electrodes of the gold-coated filter membrane. The phenomenon in which charge transfer resistance, Rct, declines at high concentration ranges was found and explained by the pearl chain effect. The pearl effect could cause a false-negative at high concentrations. We modeled the pearl chain effect as an R and C, connected parallel to the low-concentration model. When users properly applied both models for analyses, this sensor could quantitatively measure cell concentrations from 400 to 400 M per milliliter with superior linearity.

This work describes the development of an iron sensor based on a microfluidic paper-based technique, to attain iron quantification in natural waters. A new water-soluble naphthalene-3-hydroxy-4-pyridione ligand was used as a colour reagent, as it formed an orange complex with iron. As a newly described ligand, several chemical and physical parameters, namely, the sample and reagent volumes and reagent concentrations, were studied related to the formation of the coloured complex. The microfluidic paper-based analytical device (μPAD) assembly, namely, the use of different types of filter paper and different numbers of layers, was developed to obtain the best performance. Under the optimal conditions, a linear correlation was obtained in the range of 0.25–2.00 mg/L of iron, with a minimum detectable value of 0.07 mg/L. The proposed μPAD method was validated by an analysis of the certified samples and by a comparison of the tested water samples with the inductively coupled plasma (ICP) results (RE < 10%). Then, the μPAD device was successfully applied to the determination of iron in tap water, well water, river water, and seawater, with no need for any prior sample pre-treatment; recovery studies were also performed (average = 100.3% with RSD = 4.2%).

The rapid and specific point-of-care (POC) analysis of virulent pathogenic strains plays a key role in ensuring food quality and safety. In this work, a paper-based fluorescent phage biosensor was developed for the detection of the virulent E. coli O157:H7 strain (as the mode of virulent pathogens) in food samples. Firstly, phages that can specifically combine with E. coli O157:H7 (E. coli) were stained with SYTO-13 dye to prepare a novel fluorescent probe (phage@SYTO). Simultaneously, a micro-porous membrane filter with a pore size of 0.45 μm was employed as a paper chip so as to retain the E. coli-phage@SYTO complex (>1.2 μm) on its surface. The phage@SYTO (200 nm in size) was able to pass through the pores of the chip, and the complex could be retained on the paper chip using the free phage@SYTO probes. The E. coli-phage@SYTO could emit a visual fluorescent signal (excited at 365 nm; emitted at 520 nm) onto the chip, which could be detected by a smartphone to reflect the concentration of E. coli. Under optimized conditions, the detection limit was as low as 50 CFU/mL (S/N = 3) and exhibited a wide linear range from 102 to 106 CFU/mL. The sensor has potential application value for the quick and specific POCT detection of virulent E. coli in foods.

The authors make the following corrections to the published paper [...]

Transparent paper with good hydrophobicity and flexibility was expected to act as an alternative substrate in fabrication of flexible electronics. However, conventional paper made of cellulose fibers was opaque and hydrophilic without undergoing special processing. Herein, cellulose fiber paper was treated by impregnating with hydrolyzed tetraethyl orthosilicate (TEOS) followed by coating with hydrophobic polydimethylsiloxane (PDMS) to prepare hydrophobic transparent paper. The results showed that silica nanoparticles produced by the TEOS hydrolysis improved the paper transparency to some extent, increased the paper thermal stability, but still remained the hydrophilicity of paper. After the paper was further coated with the PDMS and the PDMS was consolidated, the paper became clearly transparent and hydrophobic. The processed paper had a transmittance of more than 90% at 550 nm. The water contact angle of the paper reached about 110°. This work provided a new approach for the fabrication of hydrophobic transparent paper with conventional cellulose fiber paper.

Renewable and bio-based materials have gained great interest on an industrial scale owing to environmental issues. Paper industries also are constantly exploring bio-resources for intrinsic chemico-physical property enhancement of paper and paper products. These bio-resources will potentially increase their cyclability besides making paper compatible beyond traditional uses. Mechanical beating or use of chemical additives or the combination of these methods are widely used to improve critical paper characteristics such as strength, surface smoothness, density, brightness, filler retention, water and grease resistivity etc. These chemical additives as mill effluents are hazardous and have detrimental effect on environment. So, to move ahead of traditional practices, the present review discusses about the production and utility of abundantly available renewable bio-polymers and their products such as starch, cellulose, plant-based proteins, microbial biopolymers, animal-based biopolymers, and natural gums etc. They represent ample prospect in terms of research and development on their functionality and industrial applications.

The objective of this work is to systematically evaluate the performance of the hydrolysis-based kraft pulping process and associated pulp and black liquor characteristics. Acacia wood chips were auto-hydrolyzed under various severities, then the hydrolyzed wood chips were kraft pulping. The results indicated that the yield of pulp significantly dropped with intensifying the auto-hydrolysis severity. Meanwhile, the removal rate of pentosan reached 98.6% in the screened pulp at the P-factor of 1 000. The fiber length, fines and fiber crimp of the screened pulp were not affected by the auto-hydrolysis treatment. Auto-hydrolyzed pulps deteriorated fibrillation and beating response of the pulp in a refining process. However, fiber length and fines changed obviously after beating treatment. After auto-hydrolysis, the tensile index of the paper matrices decreased, some particle substances were found on the surface of the pulp fiber, and the solid and organic content of the black liquor were improved.

Waste papers are used as a source of raw material to fabricate cellulose nanocrystals (CNCs), a highly valued product with a high degree of crystallinity. Rod-shaped CNCs with an average diameter of 53 ± 9 nm and an average length of 234 ± 42 nm were obtained with a crystallinity of around 78%. Polyvinylidene fluoride (PVDF) thin composite membrane was developed by adding CNCs into the PVDF matrix in different amounts (0, 0.5, 1, 1.5, 2, 3 wt%). Porous finger-like structures in the membrane increased with an increase in CNC content. The FTIR measurement and high-resolution FESEM image of the membranes verified the presence of CNCs in the composite membranes. 48% high pure water flux (PWF) was obtained for PVDF/CNC as compared to pristine PVDF membrane with the addition of 3% CNCs at a pressure of 1 kg−1cm−2. Water contact angle (WCA) also decreased from 85° to 69° with increasing the wt% of CNCs in the dope solution, which signifies improved hydrophilicity. Further, the PVDF/CNCs membrane showed a high bovine serum albumin (BSA) rejection of 93% and a flux recovery ratio (FRR) of 76.76 %, whereas the pristine PVDF membrane showed BSA rejection of 70.86% and a FRR of 40.82 %, respectively.

In this study, a paper-based sensor was developed for the detection of hydrogen-peroxide-related biomarkers, with glucose oxidase catalyzing as an example. Potassium iodide can catalyze the oxidation of 3,3′,5,5′-tetramethylbenzidine in the presence of hydrogen peroxide to colorize the paper-based biosensor detection area, which was imaged by a scanner, and the color intensity was analyzed by the Adobe Photoshop. Under the optimal conditions, the color intensity shows a good linear relationship with hydrogen peroxide and glucose concentrations in the ranges of 0.1–5.0 mM and 0.5–6.0 mM, respectively. The detection limit of hydrogen peroxide is 0.03 mM and the limit of quantification of glucose is 0.5 mM. Besides, the method was employed in measuring glucose concentration in fruit samples, and the spiked recoveries are in the range of 95.4–106.1%. This method is cost-effective, environmentally friendly, and easy to be operated, which is expected to realize the point-of-care testing of more hydrogen-peroxide-related biomarkers.

Tissue engineering (TE) is the multi-disciplinary approach to building 3D human tissue equivalents in the laboratory. The advancement of medical sciences and allied scientific disciplines have aspired to engineer human tissues for three decades. To date there is limited use of TE tissues/organs as replacement body parts in humans. This position paper outlines advances in engineering of specific tissues and organs with tissue-specific challenges. This paper outlines the technologies most successful for engineering tissues and key areas of advancement.

Bisphenol-A (BPA) is defined as one of the endocrine disrupting compounds. The accurate and inexpensive colorimetric paper-based analytical devices (PADs) are of crucial importance for BPA analysis. In this context, we developed for the first time a new PAD modified with chitosan and sulfamethoxazole (Chitosan-PAD) for the visual detection of BPA in water. The PAD was characterized by Fourier-transform infrared spectroscopy, which confirmed its modification by the functionalized chitosan. A yellow coloration was developed when a small volume of BPA was added to the Chitosan-PAD, allowing for visual and smartphone detection. This new strategy is based on a specific combination of BPA with chitosan and sulfamethoxazole that provides a hight selectivity to the Chitosan-PAD. The proposed PAD was successfully employed in combination with a pre-concentration step for the detection of 0.01 µg mL−1 of PBA with the naked eye using a 10-fold preconcentration factor. The PAD was effectively applied for BPA quantification in water samples with good recoveries. The developed PAD provides a green and cost-effective strategy for the on-site and one-step detection of BPA in water samples.

A novel, direct and simple colorimetric method employing μicroanalytical paper-based devices (μ-PADs) for the selective determination of bismuth is described. The suggested method exploits the colorimetric variation of bismuth after its rapid reaction with methyl thymol blue (MTB) in an acidic medium (pH ranging between 0.7 and 3.0), modified with nitric acid, on the surface of a paper device at room temperature. The devices are low cost, composed of chromatographic paper and wax barriers and the analytical protocol is easily applicable with minimal technical expertise and without the need for experimental apparatus. The user must add a test sample and read the color intensity of the colored Bi(III)–MTB complex formed at the sensing area using a simple imaging device such as a flatbed scanner. Various chemical variables, such as HNO3 and MTB concentration, reaction time, ionic strength, detection zone size and photo-capture detector are optimized. A study of interfering ions such as K+, Na+, Ca2+, Mg2+, Cl−, SO42− and HCO3− was also conducted. The stability of the paper devices is also studied in different maintenance conditions with particularly satisfactory results, rendering the method suitable for field analysis. The detection limits are as low as 3.0 mg L−1 with very satisfactory precision, ranging from 4.0% (intra-day) to 5.5% (inter-day). Natural water samples are successfully analyzed, and bismuth percentage recoveries were calculated in the range of 82.8 to 115.4%.

A glucose-driven enzymatic filter-paper fuel cell is described. A strip of filter paper coated with carbon nanotubes and the glucose oxidase enzyme functions as the anode of the enzyme fuel cell. Another strip of filter paper coated with carbon nanotubes and the laccase enzyme functions as the cathode. Between the anode and the cathode, a third strip of filter paper is placed that holds the glucose, which is the fuel, and that allows the transport of ions. The design of the cell is simple, and all the materials used for the construction are readily available and biocompatible. The cell utilizes the oxidation of glucose to generate electricity and is useful to demonstrate how chemical energy can be converted to electrical energy. (Contains 5 figures.)

Methods and equations for analysing the kinetics of enzyme-catalysed reactions were developed at the beginning of the 20th century in two centres in particular; in Paris, by Victor Henri, and, in Berlin, by Leonor Michaelis and Maud Menten. Henri made a detailed analysis of the work in this area that had preceded him, and arrived at a correct equation for the initial rate of reaction. However, his approach was open to the important objection that he took no account of the hydrogen-ion concentration (a subject largely undeveloped in his time). In addition, although he wrote down an expression for the initial rate of reaction and described the hyperbolic form of its dependence on the substrate concentration, he did not appreciate the great advantages that would come from analysis in terms of initial rates rather than time courses. Michaelis and Menten not only placed Henri's analysis on a firm experimental foundation, but also defined the experimental protocol that remains standard today. Here, we review this development, and discuss other scientific contributions of these individuals. The three parts have different authors, as indicated, and do not necessarily agree on all details, in particular about the relative importance of the contributions of Michaelis and Menten on the one hand and of Henri on the other. Rather than force the review into an unrealistic consensus, we consider it appropriate to leave the disagreements visible., (© 2013 FEBS.)

Classroom discussion of scientific articles can be an effective means of teaching scientific principles and methodology to both undergraduate and graduate science students. The availability of classic papers from the American Physiological Society Legacy Project has made it possible to access articles dating back to the early portions of the 20th century. In this article, we discuss a classic paper from the laboratory of Dr. James O. Davis on the regulation of aldosterone synthesis from the adrenal zona glomerulosa cell. Dr. Davis has conducted much of the seminal research investigating the renin-angiotensin system and the regulation of aldosterone release by angiotensin II. In addition to a characterization of the effects of ACTH on aldosterone regulation, this study is useful for discussing the basic principles of negative feedback pathways of the hypothalamic-pituitary axis. This study also provides examples of early bioassay techniques for the detection of angiotensin II and of the importance of quantitative measurements when investigating physiological responses. Three figures and one table are reproduced from the original article along with a series of discussion questions designed to facilitate discovery learning.

In this work, we explore a new method for controlling fluid transport rate on paper-based analytical devices that enables both the delay and the acceleration of fluid flow. The delays were incorporated by wax printing linear patterns of variable width within the flow channel and melted to penetrate the paper. In this manner, the surface tension of the fluid decreases while its contact angle increases, causing a pressure drop along the fluid path that reduces capillary flow. The acceleration of flow was accomplished by overlaying hydrophobic stripes (prepared by wax printing and melting the wax) on the hydrophilic path (top or top–bottom). In this manner, the fluid was repelled from two dimensions (vertical and applicate), increasing the flow rate. The combination of these methods on the same devices could adjust wicking time in intermediate time internals. The method enabled a wide timing of fluid transport, accomplishing a change in wicking times that extended from −41% to +259% compared to open paper channels. As a proof of concept, an enzymatic assay of glucose was used to demonstrate the utility of these fluid control methods in kinetic methods of analysis.

In this study, a paper-integrated analytical device that combined a paper-based colorimetric assay with a paper-based cell culture platform was developed for the in situ detection of hydrogen sulfide (H2S) in three-dimensional (3D)-cultured, live prostate cancer cells. Two kinds of paper substrates were fabricated using a simple wax-printing methodology to form the cell culture and detection zones, respectively. LNCaP cells were seeded directly on the paper substrate and grown in the paper-integrated analytical device. The cell viability and H2S production of LNCaP cells were assessed using a simple water-soluble tetrazolium salt colorimetric assay and H2S-sensing paper, respectively. The H2S-sensing paper showed good sensitivity (sensitivity: 6.12 blue channel intensity/μM H2S, R2 = 0.994) and a limit of quantification of 1.08 μM. As a result, we successfully measured changes in endogenous H2S production in 3D-cultured, live LNCaP cells within the paper-integrated analytical device while varying the duration of incubation and substrate concentration (L-cysteine). This paper-integrated analytical device can provide a simple and effective method to investigate H2S signaling pathways and drug screening in a 3D culture model.

Scientific literacy is an important fundamental skill for scientists. In order for students to improve their writing they require constant feedback throughout the process. They also need to learn the value of the peer review process by experience. Although they may require submission of a rough draft, typical upper-division writing assignments such as term papers and formal lab reports are usually due at the end of the semester and are not returned to the student until after the semester is finished; this precludes the establishment of a dialogue between the instructor and the student that can lead to improvement of the work. In addition, achieving scientific literacy through the critical analysis of journal articles is also a learned skill that requires constant feedback and guidance. This article describes a series of mini-assignments that culminate in a formal article and informal presentation. These assignments are designed to proceed through one semester of an upper-division chemistry course and to provide multiple opportunities for instructor feedback to the student both on written work and in discussion of the literature. (Contains 2 tables.)

This teaching article uses the report by Kwan et al., "Effects of methacholine, thapsigargin, and La[superscript 3+] on plasmalemmal and intracellular Ca[superscript 2+] transport in lacrimal acinar cells," where the effects of Ca[superscript 2+]-mobilizing agents in regulating Ca[superscript 2+] fluxes were examined under various conditions. Upper-level undergraduate and new graduate students in physiology are the target audience. Teaching and learning points are put forth in this article to illustrate 1) the characteristics of methacholine- and thapsigargin-induced Ca[superscript 2+] responses, 2) the different endoplasmic reticulum Ca[superscript 2+] stores accessible to methacholine and thapsigargin, 3) the inhibitory effects of La[superscript 3+] on Ca[superscript 2+] extrusion and Ca[superscript 2+] influx, and 4) the facilitatory role of La[superscript 3+] on endoplasmic reticulum Ca[superscript 2+] recycling. Each of the above concepts is first explained with references to the figures adapted from the original article. A list of student learning questions then follows, where the answers are found in the teaching notes for the instructors. It is the objective of this article to make both teaching and learning Ca[superscript 2+] regulation a rewarding experience for all. (Contains 5 figures.)

The ability to use the research literature within a given field is a basic skill that students should acquire as part of their higher education studies. However, undergraduates need support in developing this skill. The use of concept maps as an aid to interrogating the literature is described here. This may help students to highlight key issues raised within a research paper, and may be used to demonstrate understanding to their tutors. An example is given by reference to the paper in which James Watson and Francis Crick suggest a structure for DNA. In this, annotated concept maps are used to highlight key issues from the paper from two perspectives: the race to describe the structure of DNA, and the biochemistry of the molecule. (Contains 2 figures and 1 footnote.)

To integrate research into the teaching of glycoproteins, the story of discovering hydrogen-potassium ATPase (HK-ATPase) [beta] subunit is presented in a way covering all the important teaching points. The interaction between the HK-ATPase [alpha] subunit and a glycoprotein of 60-80 kDa was demonstrated to support the existence of the [beta] subunit. On revealing the strategies and experimental designs of this discovery, the knowledge of glycoproteins is delivered. The purpose of this effort was to facilitate the teaching of scientific thinking in the science classroom, to make the biochemistry classroom a more interesting place, and to attract uncertain minds into the career of biochemistry research. (Contains 1 footnote, 1 table, and 5 figures.)