Search

A paper-supported inorganic composite (PIC) separator is prepared by spraying Al 2 O 3 particles onto both surfaces of a commercial paper substrate. The as-prepared PIC separator shows excellent thermal stability without any shrinkage at 130 °C for 30 min, superior wettability towards the electrolyte, with a contact angle of 0°, and high ionic conductivity compared with that of the conventional polyethylene (PE) separator. The graphite|LiCoO 2 full-cells with the PIC separator exhibit good cycling and rate performance. In the nail penetration tests, the pouch cell assembled with the PIC separator shows high safety characteristics. Given the advantages of the PIC separator, it is a good potential replacement for the polyolefin separators used in high-safety lithium-ion batteries. [ABSTRACT FROM AUTHOR]

[Display omitted] • Novel dimer acid-based waterborne polyurethanes (DWPUs) were designed and prepared. • DWPUs were first used as multifunctional coatings for paper substrates. • Papers coated by DWPUs exhibited excellent water- and oil-resistances. • Alkyl and uniform membrane of DWPUs are critical to improve papers' properties. Paper derived from lignocellulose has great advantages over plastics as packaging material, nevertheless, the poor water- and oil-resistances of paper-derived products limited their application in high-end field. Herein, novel dimer acid-based waterborne polyurethanes (DWPUs) with different content of dimer acid-based polyester polyol (DG) were prepared and used as water- and oil-resistant coating for paper substrate. The effects of DG contents on water- and oil-resistances, mechanical properties and thermal stability of DWPUs coated papers were systematically investigated. When the content of DG reached up to 7 wt% (based on polyester glycol), the paper coated by DWPU exhibited 88.06% decrease in Cobb 60 value, 8.7 times increase in kit rating compared with uncoated paper. Meanwhile, DWPUs coated papers showed good mechanical properties and thermal stability. These improvements are attributed to the flexible long-alkyl chain, and six-ring structure of DWPUs as well as the continuous and homogeneous DWPU-derived membrane on the surface of paper. This study provides a new framework for the preparation of high quality, multifunctional, environmentally friendly water- and oil-resistant coatings for paper substrates. [ABSTRACT FROM AUTHOR]

Amine compounds can greatly enhance the thermal stability of the insulating paper used in paper-oil insulation. Many research documents focus on paper's excellent thermal stability, but less attention has been paid to the effect of oil on paper's degradation. In this research paper, we study the influence of different amine compounds on the thermal stability of both paper and oil, and a mechanism for the influence on paper-oil insulation as well as an optimal formula are proposed. First, six groups of paper were modified with different proportions of dicyandiamide (DICY), melamine, and polyacrylamide (PAM). Then, an accelerated thermal aging test at 130 °C was conducted for 30 days and the thermal aging characteristics of the oil-modified paper insulation were measured. The results showed that the thermal stability of the insulation paper modified with the amine compounds was remarkably improved, and P2 (2.25 wt % melamine, 0.75 wt % DICY, and 0.2 wt % PAM) presented the best anti-aging properties. However, certain properties of oil were influenced, such as acid value, and it was found that the ammonia produced by the amine stabilizers increased the copper compound content, which led to the deterioration of the insulating oil. Moreover, using a front-line orbital energy analysis by molecule modeling, it was determined that melamine was the core thermal stabilizer for the paper among the three amine compounds used in P2. [ABSTRACT FROM AUTHOR]