Search

THz-Time domain spectroscopic imaging is demonstrated combining a robotic scanning method with continuous signal acquisition and holographic reconstruction of the object to improve the imaging resolution. We apply the method to a metallic Siemens star in order to quantify resolution and to wood samples to demonstrate the technique on a non-metallic object with an unknown structure. [ABSTRACT FROM AUTHOR]

The potential of image-dependent gamut mapping as a constrained optimization problem is examined. Results suggest that image-dependent gamut mapping gives good mapping results and avoids visual artifacts.

The article describes a robust algorithm for the multitude of images in a typical color management workflow that allows the subsequent improvement of existing global gamut mappings. The spatial methods can be successfully added to existing gamut mapping algorithms with a substantial gain in perceived image quality.

Air-coupled ultrasound (ACU) is increasingly used for nondestructive testing (NDT). With ACU, no contact or coupling agent (e.g., water and ultrasound gel) is needed between transducers and test sample, which provides high measurement reproducibility. However, for testing in production, a minimum separation is often necessary between the sample and the transducers to avoid contamination or transducer damage. Due to wave diffraction, the collimation of the ultrasound beam decreases for larger propagation distances, and ACU images become blurred and show lower defect lateral resolution with increasing sample–transducer separation. This is especially critical to thick composites, where large-size planar sources are used to bridge the large ACU transmission loss with good collimation. In this work, ACU reradiation in unbounded media is extended to NDT of multilayered composites. The extended method is named ACU time reversal (ACU-TR) and significantly improves the defect resolution of ACU imaging. With ACU-TR, the complete pressure distribution radiated by large ACU source is measured with point receivers (RXs) in one plane arbitrarily separated from the sample. By applying acoustic holography physics, it is then possible to quantitatively reconstruct the pressure field directly at arbitrary sample defect planes, which compensates for undesired diffraction phenomena and improves minimum detectable defect size, thereby achieving subwavelength lateral resolution. We tested the method on complex wood-based composite samples based on the ACU far-field measurements at a separation of 160 mm between the sample and the RX transducer. With the proposed method, it is possible to detect surface defects as well as inner defects within composite boards. In the future, by using point RX arrays instead of a scanned microphone, both data acquisition and evaluation can be potentially implemented in real time. [ABSTRACT FROM AUTHOR]

In terahertz (THz) materials science, imaging by scanning prevails when low power THz sources are used. However, the application of array detectors operating with high power THz sources is increasingly reported. We compare the imaging properties of four different array detectors that are able to record THz radiation directly. Two micro-bolometer arrays are designed for infrared imaging in the 8--14 µm wavelength range, but are based on different absorber materials (i) vanadium oxide; (ii) amorphous silicon; (iii) a micro-bolometer array optimized for recording THz radiation based on silicon nitride; and (iv) a pyroelectric array detector for THz beam profile measurements. THz wavelengths of 96.5 µm, 118.8 µm, and 393.6 µm from a powerful far infrared laser were used to assess the technical performance in terms of signal to noise ratio, detector response and detectivity. The usefulness of the detectors for beam profiling and digital holography is assessed. Finally, the potential and limitation for real-time digital holography are discussed. [ABSTRACT FROM AUTHOR]

Existing image-difference measures show excellent accuracy in predicting distortions, such as lossy compression, noise, and blur. Their performance on certain other distortions could be improved; one example of this is gamut mapping. This is partly because they either do not interpret chromatic information correctly or they ignore it entirely. We present an image-difference framework that comprises image normalization, feature extraction, and feature combination. Based on this framework, we create image-difference measures by selecting specific implementations for each of the steps. Particular emphasis is placed on using color information to improve the assessment of gamut-mapped images. Our best image-difference measure shows significantly higher prediction accuracy on a gamut-mapping dataset than all other evaluated measures. [ABSTRACT FROM PUBLISHER]

We show that conjoint analysis, a popular multi-attribute preference assessment technique used in market research, is a well suited tool to evaluate a multitude of gamut mapping algorithms simultaneously. Our analysis is based on data from psychovisual tests assessed in a laboratory and in a web environment. Conjoint analysis allows us to quantify the contribution of every single parameter value to the perceived value of the algorithm; it also allows us to test the influence of additional parameters like gamut size or color shifts.We show that conjoint analysis can be individualized to images or observers if enough data is available. Especially promising in this respect is the combination of individual and population data. [ABSTRACT FROM AUTHOR]

We present a real-time THz imaging method using a commercial fiber-coupled photo conductive antenna as the THz source and an uncooled microbolometer camera for detection. This new combination of state-of-the-art components is very adaptable due to its compact and uncooled radiation source, whose fiber coupling allows for a flexible placement. Using a camera with high sensitivity renders real-time imaging possible. As a proof-of-concept, the beam shape of a THz Time Domain Spectrometer was measured. We demonstrate real time imaging at nine frames per second and show its potential for practical applications in transmission geometry covering both material science and security tasks. The results suggest that hidden items, complex structures and the moisture content of (biological) materials can be resolved. We discuss the limits of the current setup, possible improvements and potential (industrial) applications, and we outline the feasibility of imaging in reflection geometry or extending it to multi-spectral imaging using band pass filters. [ABSTRACT FROM AUTHOR]

We report a technological concept for freestanding photonic elements based on metamaterials fabricated on polymer films by clean-room processes and framed using 3D printing. A spin-coated cyclic olefin copolymer (TOPAS) of variable thickness down to one micrometer was used as the substrate onto which metamaterials were fabricated using optical lithography. We demonstrate the possibility of applying a second TOPAS layer to protect the device or to allow for stacking another metamaterial layer. To obtain freestanding elements, frames were 3D printed directly on top of the metamaterial before lift-off from the carrier wafer. This ensured maintaining the flatness of the elements. Both the cleanroom process and the 3D printing enabled the design and manufacturing of elements in different sizes and shapes, e.g., to adapt to specific experimental set-ups and holder geometries or to be compatible with standard optical mounts. While TOPAS is transparent for wavelengths from UV to the far infrared, except for a few infrared absorption lines, we illustrate the concept with the simulation and manufacturing of THz band-pass filters. The performance of the fabricated filters was assessed using THz time-domain spectroscopy. The process is scalable to other wavelength ranges and has the potential for upscaling in manufacturing.

Light beams with Orbital Angular Momentum (OAM) are explored in applications from microscopy to quantum communication, while the Talbot effect revives in applications from atomic systems to x-ray phase contrast interferometry. We evidence the topological charge of an OAM carrying THz beam in the near-field of a binary amplitude fork-grating by means of the Talbot effect, which we show to persist over several fundamental Talbot lengths. We measure and analyze the evolution of the diffracted beam behind the fork grating in Fourier domain to recover the typical donut-shaped power distribution, and we compare experimental data to simulations. We isolate the inherent phase vortex using the Fourier phase retrieval method. To complement the analysis, we assess the OAM diffraction orders of a fork grating in the far-field using a cylindrical lens.

Imaging with THz radiation has proved an important tool for both fundamental science and industrial use. Here we review a class of THz imaging implementations, named coherent lensless imaging, that reconstruct the coherent response of arbitrary samples with a minimized experimental setup based only on a coherent source and a camera. After discussing the appropriate sources and detectors to perform them, we detail the fundamental principles and implementations of THz digital holography and phase retrieval. These techniques owe a lot to imaging with different wavelengths, yet innovative concepts are also being developed in the THz range and are ready to be applied in other spectral ranges. This makes our review useful for both the THz and imaging communities, and we hope it will foster their interaction.

We present a method for the separation of the signal scattered from an object hidden behind a THz-transparent sample in the framework of THz digital holography in reflection. It combines three images of different interference patterns to retrieve the amplitude and phase distribution of the object beam. Comparison of simulated with experimental images obtained from a metallic resolution target behind a Teflon plate demonstrates that the interference patterns can be described in the simple form of three-beam interference. Holographic reconstructions after the application of the method show a considerable improvement compared to standard reconstructions exclusively based on Fourier transform phase retrieval.

We demonstrate a digital holographic setup for Terahertz imaging of surfaces in reflection. The set-up is based on a high-power continuous wave (CW) THz laser and a high-resolution (640 × 480 pixel) bolometer detector array. Wave propagation to non-parallel planes is used to reconstruct the object surface that is rotated relative to the detector plane. In addition we implement synthetic aperture methods for resolution enhancement and compare Fourier transform phase retrieval to phase stepping methods. A lateral resolution of 200 μm and a relative phase sensitivity of about 0.4 rad corresponding to a depth resolution of 6 μm are estimated from reconstructed images of two specially prepared test targets, respectively. We highlight the use of digital THz holography for surface profilometry as well as its potential for video-rate imaging.

A non-monochromatic THz Quantum Cascade Laser and an uncooled micro-bolometer array detector with VGA resolution are used in a beam-splitter free holographic set-up to measure amplitude and phase objects in transmission. Phase maps of the diffraction pattern are retrieved using the Fourier transform carrier fringe method; while a Fresnel-Kirchhoff back propagation algorithm is used to reconstruct the complex object image. A lateral resolution of 280 µm and a relative phase sensitivity of about 0.5 rad are estimated from reconstructed images of a metallic Siemens star and a polypropylene test structure, respectively. Simulations corroborate the experimental results.

Rendering materials on displays becomes ubiquitous in industrial design, architecture, and visualization. Yet the experience of the material from other modes of perception is missing in that representation. This forces observers to rely on visual cues only while judging material properties. In the present study, we compare judgments of rough and glossy surfaces by interacting and passive observers. We investigate whether observers actively exploring rendered stimuli judge properties differently than observers passively watching renderings. Resulting interobserver agreement is significantly higher for interacting observers.