Search

Plant leaf diseases are challenging to categorize due to the complexity of the pattern variations and the high degrees of inter‐class similarity. Plant ailments harm food quality and production. To ensure the quality and quantity of harvests, it is essential to protect plants from disease. Detection of diseases at an early stage is the main and the most complex task for farmers due to common morphological properties like colour, shape, texture, and edges. In this study, a Hybrid Deep Learning model named Hybrid‐Convolutional Support Machine (H‐CSM) based on 'Support Vector Machine (SVM)', 'Convolutional Neural Network (CNN)' and 'Convolutional Block Attention Module (CBAM)' is proposed for the early diagnosis and classification of leaf diseases in plants leaf. The suggested model can initially identify different plant leaf illnesses, although it is not constrained to these. A database of pictures of plant leaves is used to test the suggested method based on different evaluation parameters. The results were highly promising, with an accuracy of up to 98.72% which has been increased by applying better learning methods. Farmers can quickly identify 36 common diseases with a little instruction for 14 plant categories, enabling them to take prompt preventive measures using the proposed method. [ABSTRACT FROM AUTHOR]

Background: Propolis exhibits multiple biological and pharmacological properties attributed to the presence of natural bio active compounds. In spite of its potential healthy effects, its use in health‐food and pharmaceutical products is very restricted due to its intense aroma, highly unstable, low aqueous solubility, and low bioavailability. The purpose of this study is to fabricate an appropriate, stable, and biodegradable casein‐based nanocarrier as propolis delivery system. Propolis‐loaded casein nanocarriers were prepared at different propolis extract/caseinate ratio and assessed for physicochemical, structural, and thermal properties. Results: The nanocarriers showed an increase of particle size augmenting propolis extract/caseinate ratio and caseinate concentration. Image processing studies revealed an increase in L* parameter (89.743), while b* parameter revealed a reduction in the yellow color (14.655) increasing the amount propolis extract in the nanocarrier. Surface photomicrographs evidenced that an increment of propolis extract decreased the network compactness of the nanocarriers correlated with the lower entrapment of propolis extract into carriers at higher propolis extract/caseinate ratio. X‐ray diffraction pattern suggested that propolis encapsulation produced a decrement in the caseinate crystallinity while differential scanning calorimetry and thermogravimetric/differential thermal analysis thermograms evidenced an increment of thermal stability of nanocarrier with increasing propolis extract content. Conclusion: Propolis extract encapsulated within casein nanocarriers represented convenient physicochemical attributes and could provide as bioactive load in food/medical system. [ABSTRACT FROM AUTHOR]

Background: Skin barrier function is significantly impacted by skin moisture. Most non‐invasive evaluation techniques to measure skin surface hydration relying on its electrical properties, which are limited in scope and have unstable operations. Applying image processing for skin hydration assessment is uncommon, with an emphasis on skin‐capacitive pictures and near‐infrared images in general, which demand a certain spectrum. As a result, there is an increasing need for wide‐area skin hydration evaluation and mapping. Objective: The study aims to propose a quantitative evaluation algorithm for skin surface hydration from visible‐light images. Materials and methods: Three devices were applied to measure skin hydration: skin image capture device and two recognized commercial skin devices. A digital image processing system creates a new index, called GVR, to symbolize skin surface moisture. The CLAHE algorithm was applied to enhance the contrast of skin image, and after calculating it with the monochrome image, the skin reflectance image was segmented. The GVR was estimated using the values of the individual sites and the entire skin. The correlation coefficient between the three methods was examined using statistical analysis to assess the performance of GVR. Results: Skin hydration estimated from visible‐light images is influenced by the entire facial structure in addition to specific areas. The electrical and visible image evaluations showed a strong association with a significant difference. Conclusion: It was discovered that reflecting measures from visible images provide a quick and efficient way to quantify the moisture of the skin's surface. [ABSTRACT FROM AUTHOR]

In recent years, low‐light image enhancement has become increasingly active. However, in underground mine environments, acquiring high‐quality images is still challenging due to low light, low contrast, and occlusion. To address this problem, this study proposes a low‐light image enhancement method for underground mine based on generative adversarial networks (UM‐GAN), which aims to take full advantage of the ability of GAN to achieve the restoration of details, the reduction of noise, and the improvement of overall image quality. The model proposed in this paper is divided into three main parts. Initially, a generator network adopting an encoder–decoder structure is developed. Subsequently, a novel strategy is introduced to merge information by utilizing inverted greyscale images and low‐light images as inputs. Further image quality enhancement is achieved by incorporating a noise reduction module employing the diffusion model. To ascertain the efficacy of the UM‐GAN method, evaluations are conducted on diverse real‐world and synthetic datasets, juxtaposing the approach against superior methods. Through qualitative and quantitative comparative experiments, the method showcases noteworthy advancements through qualitative and quantitative comparative experiments, substantiating its effectiveness. This research provides new ideas and methods for overcoming image quality problems in underground mine environments and contributes to the development of underground mine image processing. [ABSTRACT FROM AUTHOR]

The surface quality of steel strip is a critical indicator of the quality of hot‐rolled strip, so accurate inspection of its surface is essential. However, the complex texture of steel strip surface defects makes the detection challenging. Here, a multi‐scale feature fusion and attention based YOLOv5 (MFFA‐YOLOv5) model is proposed. Specifically, the bottom layer features are up‐sampled and fused not only with the middle layer features, but also with the top layer features, so that the model better captures the surface texture information of the steel strip. Secondly, an improved attention mechanism module is introduced to deal with the global and local information of the steel strip surface by introducing down‐sampling and up‐sampling paths based on Convolutional Block Attention Module (CBAM). Meanwhile, a self‐attention mechanism path is added to improve the capability of feature representation. Experimental results on the NEU‐DET dataset show that the MFFA‐YOLOv5 model significantly outperforms other state‐of‐the‐art methods. [ABSTRACT FROM AUTHOR]

Segmentation is crucial in diagnosing retinal diseases by accurately identifiying retinal vessels. This paper addresses the complexity of segmenting retinal vessels, highlighting the need for precise analysis of blood vessel structures. Despite the progress made by convolutional neural networsks (CNNs) in image segmentation, their limitations in capturing the global structure of retinal vsessels and maintaining segmentation continuity present challenges. To tackle these issues, our proposed network integrates graph convolutional networks (GCNs) and attention mechansims. This allows the model to consider pixel relationships and learn vessel graphical structures, significantly improving segmentation accuracy. Additionally, the attentional feature fusion module, including pixel‐wise and channel‐wise attention mechansims within the U‐Net architecture, refines the model's focus on relevant features. This paper emphasizes the importance of continuty preservation, ensuring an accurate representation of pixel‐level information and structural details during sefmentation. Therefore, our method performs as an effective solution to overcome challenges in retinal vessel segmentation. The proposed method outperformed the state‐of‐the‐art approaches on DRIVE (Digital Retinal Images for Vessel Extraction) and STARE (Structed Analysis of the Retina) datasets with accuracies of 0.12% and 0.14%, respecttively. Importantly, our proposed approach excelled in delineating slender and diminutive blood vessels, crucial for diagnosing vascular‐related diseases. Implementation is accessible on https://github.com/CVLab‐SHUT/VGA‐Net. [ABSTRACT FROM AUTHOR]

The demand for less complex and more accurate architectures has always been a priority since the broad usage of computer vision in everyday life, like auto‐drive cars, portable applications, augmented reality systems, medical image analysis etc. There are a lot of methods that have been developed to improve the accuracy and complexity of object detection, like the generations of R‐CNNs and YOLOs. However, these methods are not the most efficient architectures, and there is always room to improve. In this study, the 5th version of YOLO is employed and the improved architecture, Inception‐YOLO, is presented. The model significantly outperforms the SOTA YOLO family. Specifically, the improvements can be summarised as follows: impressive improvement of floating point operations (FLOPs) and number of parameters, as well as improvement in accuracy compared to the models with fewer FLOPs. All our presented approaches, like the optimized inception module, proposed structures for CSP and SPPF, and the improved loss function used in this research, work together to incrementally improve detection results, accuracy, demanded memory, and FLOPs simultaneously. For a glimpse of performance, the Inception‐YOLO‐S model hits 38.7% AP with 5.9M parameters and 11.5 BFLOPs and outperforms YOLOv5‐S with 37.4% AP, 7.2M parameters, and 16.5 BFLOPs. [ABSTRACT FROM AUTHOR]

In the realm of video salient object detection (VSOD), the majority of research has traditionally been centered on third‐person perspective videos. However, this focus overlooks the unique requirements of certain first‐person tasks, such as autonomous driving or robot vision. To bridge this gap, a novel dataset and a camera‐based VSOD model, CaMSD, specifically designed for egocentric videos, is introduced. First, the SalEgo dataset, comprising 17,400 fully annotated frames for video salient object detection, is presented. Second, a computational model that incorporates a camera movement module is proposed, designed to emulate the patterns observed when humans view videos. Additionally, to achieve precise segmentation of a single salient object during switches between salient objects, as opposed to simultaneously segmenting two objects, a saliency enhancement module based on the Squeeze and Excitation Block is incorporated. Experimental results show that the approach outperforms other state‐of‐the‐art methods in egocentric video salient object detection tasks. Dataset and codes can be found at https://github.com/hzhang1999/SalEgo. [ABSTRACT FROM AUTHOR]

Slug flow processes draw much attention in chemical and pharmaceutical manufacturing thanks to their ability to eliminate downtime costs and batch‐to‐batch variation. Using in‐line video can monitor the current process status and improve the stability of the slug flow. However, there are no effective image processing methods aiming at such videos from chemical experiments due to limited training sample size and the variety of experimental settings. The paper proposes a training‐free method to automatically detect and measure the slugs from in‐line videos. Multiple image features are fused to identify the slug shapes under various lighting conditions, a six‐point model is fitted to achieve better volume estimation, and a consistency score is estimated to quantify the detection uncertainty. The proposed algorithm achieves similar results to manual labeling for various types of slug flow processes, improving the accuracy of slug column estimation by a large margin compared to the existing automatic methods. Finally, using it to monitor the slug flow process's stability and the change of the slug volume in an injection point are demonstrated. The method not only shows that handcrafted image features have the capability for detection and segmentation from chemical experiment images but also paves the road for a training‐based algorithm for the task. [ABSTRACT FROM AUTHOR]

Low‐light image enhancement is a longstanding challenge in low‐level vision, as images captured in low‐light conditions often suffer from significant aesthetic quality flaws. Recent methods based on deep neural networks have made impressive progress in this area. In contrast to mainstream convolutional neural network (CNN)‐based methods, an effective solution inspired by the transformer, which has shown impressive performance in various tasks, is proposed. This solution is centred around two key components. The first is an image synthesis pipeline, and the second is a powerful transformer‐based pre‐trained model, known as the low‐light image enhancement transformer (LIET). The image synthesis pipeline includes illumination simulation and realistic noise simulation, enabling the generation of more life‐like low‐light images to overcome the issue of data scarcity. LIET combines streamlined CNN‐based encoder‐decoders with a transformer body, efficiently extracting global and local contextual features at a relatively low computational cost. The extensive experiments show that this approach is highly competitive with current state‐of‐the‐art methods. The codes have been released and are available at LIET. [ABSTRACT FROM AUTHOR]

To reduce the occurrence of information loss and distortion in image style transfer, a method is proposed for researching and designing image style transfer technology based on multi‐scale convolutional neural networks (CNNs) feature fusion. Initially, the VGG19 model is designed for coarse and fine‐scale networks to achieve multi‐scale CNN feature extraction of target image information. Subsequently, while setting the corresponding feature loss function, an additional least‐squares penalty parameter is introduced to balance the optimal total loss function. Finally, leveraging the characteristics of stochastic gradient descent iteration, image features are fused and reconstructed to obtain better style transfer images. Experimental evaluations utilize peak signal‐to‐noise ratio (PSNR), structural similarity index (SSIM), information entropy (IE), and mean squared error (MSE) as metrics for assessing the transferred images, comparing them with three typical image style transfer methods. Results demonstrate that the proposed method achieves optimal performance across all metrics, realizing superior image style transfer effects. [ABSTRACT FROM AUTHOR]

This document is a guest editorial from the journal IET Computer Vision, discussing the topic of advanced image restoration and enhancement. The editorial highlights the challenges faced in this field, such as the complexity of degradation models for real-world low-quality images and the difficulty of acquiring paired data. It also introduces a special issue of the journal that includes five accepted papers, which focus on video reconstruction and image super-resolution. The editorial concludes by providing brief summaries of each accepted paper. The guest editors of the special issue are also mentioned, along with their research interests and affiliations. [Extracted from the article]

In recent years, many methods for image super‐resolution (SR) have relied on pairs of low‐resolution (LR) and high‐resolution (HR) images for training, where the degradation process is predefined by bicubic downsampling. While such approaches perform well in standard benchmark tests, they often fail to accurately replicate the complexity of real‐world image degradation. To address this challenge, researchers have proposed the use of unpaired image training to implicitly model the degradation process. However, there is a significant domain gap between the real‐world LR and the synthetic LR images from HR, which severely degrades the SR performance. A novel unsupervised image‐blind super‐resolution method that exploits degradation feature‐based learning for real‐image super‐resolution reconstruction (RDFL) is proposed. Their approach learns the degradation process from HR to LR using a generative adversarial network (GAN) and constrains the data distribution of the synthetic LR with real degraded images. The authors then encode the degraded features into a Transformer‐based SR network for image super‐resolution reconstruction through degradation representation learning. Extensive experiments on both synthetic and real datasets demonstrate the effectiveness and superiority of the RDFL method, which achieves visually pleasing reconstruction results. [ABSTRACT FROM AUTHOR]

Perception systems in autonomous vehicles need to accurately detect and classify objects within their surrounding environments. Numerous types of sensors are deployed on these vehicles, and the combination of such multimodal data streams can significantly boost performance. The authors introduce a novel sensor fusion framework using deep convolutional neural networks. The framework employs both camera and LiDAR sensors in a multimodal, multiview configuration. The authors leverage both data types by introducing two new innovative fusion mechanisms: element‐wise multiplication and multimodal factorised bilinear pooling. The methods improve the bird's eye view moderate average precision score by +4.97% and +8.35% on the KITTI dataset when compared to traditional fusion operators like element‐wise addition and feature map concatenation. An in‐depth analysis of key design choices impacting performance, such as data augmentation, multi‐task learning, and convolutional architecture design is offered. The study aims to pave the way for the development of more robust multimodal machine vision systems. The authors conclude the paper with qualitative results, discussing both successful and problematic cases, along with potential ways to mitigate the latter. [ABSTRACT FROM AUTHOR]

Recent advances in deep convolutional neural networks have shown improved performance in face super‐resolution through joint training with other tasks such as face analysis and landmark prediction. However, these methods have certain limitations. One major limitation is the requirement for manual marking information on the dataset for multi‐task joint learning. This additional marking process increases the computational cost of the network model. Additionally, since prior information is often estimated from low‐quality faces, the obtained guidance information tends to be inaccurate. To address these challenges, a novel Decoder Structure Guided CNN‐Transformer Network (DCTNet) is introduced, which utilises the newly proposed Global‐Local Feature Extraction Unit (GLFEU) for effective embedding. Specifically, the proposed GLFEU is composed of an attention branch and a Transformer branch, to simultaneously restore global facial structure and local texture details. Additionally, a Multi‐Stage Feature Fusion Module is incorporated to fuse features from different network stages, further improving the quality of the restored face images. Compared with previous methods, DCTNet improves Peak Signal‐to‐Noise Ratio by 0.23 and 0.19 dB on the CelebA and Helen datasets, respectively. Experimental results demonstrate that the designed DCTNet offers a simple yet powerful solution to recover detailed facial structures from low‐quality images. [ABSTRACT FROM AUTHOR]

Online detection of action start is a significant and challenging task that requires prompt identification of action start positions and corresponding categories within streaming videos. This task presents challenges due to data imbalance, similarity in boundary content, and real‐time detection requirements. Here, a novel Time‐Attentive Fusion Network is introduced to address the requirements of improved action detection accuracy and operational efficiency. The time‐attentive fusion module is proposed, which consists of long‐term memory attention and the fusion feature learning mechanism, to improve spatial‐temporal feature learning. The temporal memory attention mechanism captures more effective temporal dependencies by employing weighted linear attention. The fusion feature learning mechanism facilitates the incorporation of current moment action information with historical data, thus enhancing the representation. The proposed method exhibits linear complexity and parallelism, enabling rapid training and inference speed. This method is evaluated on two challenging datasets: THUMOS'14 and ActivityNet v1.3. The experimental results demonstrate that the proposed method significantly outperforms existing state‐of‐the‐art methods in terms of both detection accuracy and inference speed. [ABSTRACT FROM AUTHOR]

An adaptively hybrid method was proposed to improve the performance of fractal coding methods. First, it is found that the range blocks with large variances (RBLVs) play a crucial role in degrading decoded images, and the effect of the remaining range blocks with small variances (RBSVs) can be ignored. Then, an adaptive method was proposed to divide the range blocks into the above two categories: RBLVs and RBSVs. Second, RBLVs were designed to be encoded in an extended domain block pool (EDBP). Then, better block‐matching effect can be obtained, which will result in better decoded image quality. Further, the no‐search fractal encoding method is adopted for RBSVs to achieve faster encoding speed and fewer bits per pixel (bpp). Finally, four fractal coding methods were adopted to assess the performance of the proposed method. Experimental results show that compared with the previous methods, the PSNR quality of decoded images in the proposed method can be improved by about 0.15–0.4 dB, about 20%–35% of the total computations in encoding process can be saved, and about 0.2 bpp can be saved. Moreover, under the same decoding time, the proposed method can achieve comparable or smaller deviations regarding the decoded image. [ABSTRACT FROM AUTHOR]

In order to balance accuracy and real‐time performance in semantic segmentation, this paper proposes a real‐time semantic segmentation algorithm model based on attention mechanism and multi‐branch feature fusion using Fast convolutional neural network model (Fast‐SCNN). In this method, the spatial detail feature enhancement branch is introduced to enhance spatial detail features firstly. Then, through rational design of fusion module, the feature information of each branch is optimized to achieve better fusion of deep and shallow features. At the end of the feature fusion module, an adaptive feature enhancement focus module is introduced to capture the interdependence between remote pixels. The experimental results show that the proposed algorithm achieves 71.55% segmentation accuracy on Cityscapes dataset, the reasoning speed FPS is 97.6 frames/s, and the number of parameters is 1.39 M, which verifies the effectiveness of the network model constructed by the algorithm. Code is available at https://github.com/ccchhheeennn/model. [ABSTRACT FROM AUTHOR]

To address the challenges of detecting a large number of objects and a high proportion of small objects in aerial drone imagery, an aerial dense small object detection algorithm called coordinate position attention module you only look once (CPAM‐YOLO) is proposed based on the coordinate position attention module (CPAM). In the backbone network of CPAM‐YOLO, a CPAM is proposed and embedded that decomposes channel attention into two 1D feature encoding processes, and selectively combines the features of each position through the weighted sum of all position features. Finally, features are aggregated along two spatial directions, increasing the effective information utilization of input feature positions and channels. The backbone network, feature enhancement network, and detection heads have been optimized to improve detection accuracy while ensuring a lightweight detection network. Using lightweight backbone networks to significantly reduce the number of parameters while using high‐resolution feature enhancement networks to retain more semantic and detailed features. The algorithm's performance was evaluated using the publicly available VisDrone2019 dataset. Compared to the baseline network YOLOv5l, CPAM‐YOLO achieved a 4.5% improvement in mAP0.5 and a 3.2% improvement in mAP0.95. These experimental results demonstrate the strong practicality of the CPAM‐YOLO object detection network for detecting dense small objects in aerial image. [ABSTRACT FROM AUTHOR]

The No‐Reference Image Quality Assessment (NR‐IQA) method can predict quality scores of distorted images without the reference image. However, due to the variability in both color and structure of images, existing NR‐IQA methods struggle to accurately predict quality scores of distorted images. Therefore, an NR‐IQA method based on a Dual‐Branch Residual Network (DBRIQA) for evaluating the quality scores of color‐distorted images is proposed. First, guided filtering is applied to the hue images in the HSV space to extract distortion information from the image's color. Then, due to significant differences in distorted images, enhancements are made to the traditional residual blocks, forming a feature extraction module that captures multi‐scale features from the image. In order to capture the global relationships in the distorted image, a Global‐Level Attention Block (GLAB) is introduced, facilitating the interaction of information among the extracted features. Experiments were conducted across four publicly available IQA datasets, including LIVE, CSIQ, TID2008, and TID2013. The experimental results demonstrate that the proposed method exhibits strong performance and generalization capabilities in predicting image quality compared to peer methods. [ABSTRACT FROM AUTHOR]

Precise and timely recognition of hazardous chemical substances is of great significance for safeguarding human health, ecological environment, public security, etc., especially crucial for adopting appropriate disposition measures. Up to now, there remains a practical challenge to sensitively detect and differentiate organic amines with similar chemical structures with intuitive analysis outcomes. Here, a unique optical probe with two electrophilic recognition sites for rapid and ultra‐sensitive ratiometric fluorescence detection of ethylenediamine (EDA) is presented, while producing distinct fluorescence signals to its structural analog. The probe exhibits ppb/nmol level sensitivity to liquidous and gaseous EDA, specific recognition toward EDA without disturbance to up to 28 potential interferents, as well as rapid fluorescence response within 0.2 s. By further combining the portable sensing chip with the convolutional algorithm endowed with image processing, this work cracked the problem of precisely discriminating the target and non‐targets at extremely low concentrations. [ABSTRACT FROM AUTHOR]

Infrared object detection and tracking in dense urban traffic remain a challenge due to factors such as low contrast, small intra‐class differences, and frequent false positives and negatives. To overcome these, the authors introduce YOLO‐IR, an algorithm based on the enhanced YOLOv8s, and YOLO‐DeepOC‐IR, a comprehensive infrared multi‐object tracking method for urban traffic, integrating both detection and tracking. During preprocessing, three infrared image enhancement techniques, local contrast multi‐scale enhancement, non‐local means, and contrast limited adaptive histogram equalization, are applied for better reliability in dense scenes. To further improve the performance, the original YOLOv8s backbone is replaced with MobileVITv3 to enhance detection accuracy and robustness. This infrared feature extraction module, incorporated into the detector, combines canny edge detection, Gabor filtering, and open operation layers, significantly boosting object detection in infrared imagery. The tracker's feature processing capabilities are improved using the learned arrangements of three patch codes descriptor and locality‐sensitive hashing for feature extraction and matching. Experimental results on FLIR ADAS v2 and InfiRay datasets indicate superior performance of this method, achieving 78.6% mAP and 151.1 FPS in detection, and up to 80.8% moving object tracking accuracy, 78.6% identification F1 score, and 62.1% higher order tracking accuracy in multi‐object tracking. [ABSTRACT FROM AUTHOR]

Whole brain segmentation from magnetic resonance images (MRI) is crucial in diagnosing brain diseases and analyzing neuroimaging data. Despite advances through deep learning, challenges such as uneven gray distribution and the presence of artifacts still present hurdles in medical image processing. These limitations are often a result of insufficient spatial contextual information and lack of attention to important regions within existing models. To address these issues, this paper presents SSA‐UNet (Squeeze‐and‐Excitation and Self‐Attention UNet), a uniquely designed deep convolutional neural network that integrates spatial constraints by converting three consecutive 2D MRI slices into a single 2.5D image. This facilitates capturing inter‐slice dependencies effectively. Additionally, the newly formulated SSA block, which sequentially incorporates channel attention and Self‐Attention mechanisms, is placed before the decoders in the conventional U‐Net architecture. This enables the network to automatically weight different feature maps and focus more effectively on regions requiring precise segmentation. Rigorous evaluations on LPBA40 and IBSR18 datasets substantiate the remarkable improvements in accuracy and stability achieved by SSA‐UNet. Results indicate Dice coefficients of 98.38% and 97.47%, specificity of 99.69% and 99.57%, and sensitivity of 98.5% and 97.98% for the respective datasets. Compared to other existing models, SSA‐UNet shows significant improvements on both the LPBA40 and IBSR18 datasets. On the LPBA40 dataset, SSA‐UNet's Dice coefficient improved by 0.33% compared to the sub‐optimal model, while on the IBSR18 dataset, the improvement reached 1.78%. These empirical findings demonstrate SSA‐UNet's heightened capability in addressing the long‐standing challenges in MRI‐based whole‐brain segmentation. [ABSTRACT FROM AUTHOR]

Despite the existence of various super‐resolution (SR) methods, most of them focus on designing models for specific upscaling factors rather than fully exploiting inter‐scale correlation to improve efficiency. In contrast, multi‐scale SR methods can effectively reduce the redundancy of network parameters by aggregating the feature extraction processes corresponding to multiple scales into a unified process. The aim of this study is to enhance the compactness and efficiency of the SR model. Thus, an efficient multi‐scale SR method called the diverse branch feature refinement network (DBFRN) is proposed. By decoupling the training process and inference process based on the idea of structural re‐parameterization, multi‐branch topology is adopted to enrich multi‐scale learning and merge branches to achieve efficient inference with equivalent effects. Specifically, two re‐parameterization strategies are designed and two corresponding feature refinement blocks for different feature levels in multi‐scale SR network. Extensive experiments demonstrate that the proposed multi‐scale SR method is effective and efficient, and it can outperform advanced single‐scale methods in terms of quantity and quality. [ABSTRACT FROM AUTHOR]

The synthesis of rain fields is essential in multiple research fields and applications, including Single‐image Derain. However, there is a lack of research on simulated rain fields, and the existing rain field generation models struggle to capture complex spatial distributions and generate truly random rain fields. To address this, the authors propose a generative adversarial networks‐based rain field generation network, which consists of a generator, a discriminator, and a feature extraction block that can produce realistic and complex rain fields. The authors' experiments demonstrate that this method achieves an average Frechet Inception Distance score of 0.035, and user studies indicate that the generated rain distribution looks naturally. [ABSTRACT FROM AUTHOR]

In the field of scientific visualization, the upscaling of time‐varying volume is meaningful. It can be used in in situ visualization to help scientists overcome the limitations of I/O speed and storage capacity when analysing and visualizing large‐scale, time‐varying simulation data. This paper proposes self‐attention residual network‐based spatial super‐resolution (SARN‐SSR), a spatial super‐resolution model based on self‐attention residual networks that can generate time‐varying data with temporal coherence. SARN‐SSR consists of two components: a generator and a discriminator. The generator takes the low‐resolution volume sequences as the input and gives the corresponding high‐resolution volume sequences as the output. The discriminator takes both synthesized and real high‐resolution volume sequence as the input and gives a matrix to predict the realness as the output. To verify the validity of SARN‐SSR, four sets of time‐varying volume datasets are applied from scientific simulation. In addition, SARN‐SSR is compared on these datasets, both qualitatively and quantitatively, with two deep learning‐based techniques and one traditional technique. The experimental results show that by using this method, the closest time‐varying data to the ground truth can be obtained. [ABSTRACT FROM AUTHOR]

Pixel‐level labeling of regions of interest in an image is a key step in building a labeled training dataset for supervised deep learning networks of images. However, traditional manual labeling of cancerous regions in digital pathological images by doctors is time‐consuming and inefficient. To address this issue, this paper proposes an automatic labeling method for whole slide images, which combines clustering and edge detection techniques. The proposed method utilizes the multi‐level feature fusion model and the Long‐Short Term Memory network to discriminate the cancerous nature of the whole slide images, thereby improving the classification accuracy of the whole slide images. Subsequently, the automatic labeling of cancerous regions is achieved by integrating a density‐based clustering algorithm and an edge point extraction algorithm, both based on the discriminated results of the cancerous properties of whole slide images. The experimental results demonstrate the effectiveness of the proposed method, which offers an efficient and accurate solution to the challenging task of cancerous region labeling in digital pathological images. [ABSTRACT FROM AUTHOR]

Existing segmentation‐based methods have made considerable progress in arbitrarily shaped text detection due to the advantage of dealing with shape variation. However, there still exist challenges to detecting accurate text instances with dense layouts, inaccurate annotations, and complex backgrounds. Many recent works have focused on improving arbitrary boundary prediction, but it may be difficult to accurately distinguish each instance of dense layouts because their boundary pixels may be mistakenly classified to produce inaccurate results (i.e., adhesive texts) with inaccurate annotation and complex backgrounds. Considering the local and long‐range dependencies, this paper proposes an efficient text detector, namely T‐Skeleton, to obtain more reliable segmentation detections. In the spirit of object skeletonization, we introduce the text instance skeleton highlighting the semantically significant structure (similar to the skeleton of a fish) to explicitly capture the long‐range dependencies of text instances. The key idea of T‐Skeleton is to calibrate the coarse text proposals by embedding text instance skeletons to separate crowd texts accurately and robustly. We further design a channel attention module to enlarge the performance margin between T‐Skeleton and the segmentation baseline. Experimental results on four publicly available datasets show the superiority of T‐Skeleton in handling long and curved texts. [ABSTRACT FROM AUTHOR]

The Intelligent Evaluation System for Calligraphy Characters (IESCC) is used for teaching calligraphy, and users can learn calligraphy through the modifications given by the system. Chinese character skeleton extraction is an important step in the intelligent evaluation algorithm of calligraphic characters. The skeletons of Chinese characters extracted by traditional refinement algorithms are prone to redundant branches and deformed skeletons, which can lead to skeleton extraction results that do not conform to the topology of the original character. In this study, the focus lies on hard‐pen regular script, and skeleton repair and extraction are performed for these characters. According to the writing characteristics of regular script, the redundant burs are removed and the deformation zone of the thinned skeleton is detected, and then the idea of first splitting is used, then restructuring, to propose a skeleton extraction algorithm based on stroke characterization and ambiguous zone detection for hard‐pen regular script, referred to as SCAD. First, a thinning algorithm is used to extract the skeleton of Chinese characters and remove redundant pixels. By analyzing the stroke characteristics of regular script, the burrs are classified and different conditions are set to detect and remove the burrs. Then the ambiguous zones are detected according to the different kinds of junction points. Then, curvature, stroke width and direction deviation are used to analyze the continuity of stroke segments, and the decision function is used to classify the stroke segments. Finally, the stroke segments with optimal pairings were compensated by interpolation according to the direction trend. This concludes the skeleton extraction. Skeleton extraction is performed on 1000 sample characters, and the SCAD algorithm can extract the skeleton of Chinese characters with an accuracy of up to 98.37%. It is proved that the SCAD method proposed here is a practical and effective method to extract the skeleton of hard‐pen regular script. [ABSTRACT FROM AUTHOR]

Identifying saliency in high dynamic range (HDR) images is a fundamentally important issue in HDR imaging, and plays critical roles towards comprehensive scene understanding. Most of existing studies leverage hand‐crafted features for HDR image saliency prediction, lacking the capabilities of fully exploiting the characteristics of HDR image (i.e. wider luminance range and richer colour gamut). Here, systematical studies are carried out on HDR image saliency prediction by proposing a new framework to single out the contributions from multi‐exposure images. Specifically, inspired by the mechanism of HDR imaging, the method first utilizes graph neural networks to model the relations among multi‐exposure images and the tone‐mapped image obtained from an HDR image, enabling more discriminative saliency‐related feature representations. Subsequently, the saliency features driven by global semantic knowledge are aggregated from the tone‐mapped image through enhancing global context‐aware semantic information. Finally, a fusion module is designed to integrate saliency‐oriented feature representations originated from multi‐exposure images and the tone‐mapped image, producing the saliency maps of HDR images. Moreover, a new challenging HDR eye fixation database (HDR‐EYEFix) is created, expecting to further contribute the research on HDR image saliency prediction. Experiment results show that the method obtains superior performance compared to the state‐of‐the‐art methods. [ABSTRACT FROM AUTHOR]

Feature matching plays a crucial role in computer vision, with applications in visual localization, simultaneous localization and mapping (SLAM), image stitching, and more. It establishes correspondences between sets of feature points from multiple images, enabling various tasks. Over the years, feature matching has witnessed significant development, with an increasing number of methods being applied. However, different methods exhibit different degrees of applicability in different scenarios and requirements due to their different rationales. To cope with these issues, a comprehensive analysis and comparison of matching methods are essential. Existing reviews often lack coverage of deep learning models and focus more on feature detection and description, neglecting the matching process. This survey investigates feature detection, description, and matching techniques within the feature‐based image‐matching pipeline. Representative methods, their mechanisms, and application scenarios are also briefly introduced. In addition, comprehensive evaluations of classical and state‐of‐the‐art methods are conducted through extensive experiments on representative datasets. Particularly, matching‐based applications are compared to fully demonstrate the advantages of the methods. Lastly, this survey highlights current problems and development directions in matching methods, serving as a reference for researchers in the field. [ABSTRACT FROM AUTHOR]

Object detection in remote sensing images poses great challenges due to the dense distribution, arbitrary orientation, and aspect ratio variations of objects. Most of the existing methods rely on aligned convolutional features, which fail to capture the geometric information of objects effectively and result in the inconsistency between the classification score and localization accuracy. Moreover, densely packed objects suffer from spatial feature aliasing caused by the intersection of reception fields between objects. To address this issue, a deformable convolution‐based method named rotated points is proposed, which consists of two modules: a point set loss module and a high‐quality sample assignment module. The point set loss module can extract geometric features of objects in arbitrary directions with fine‐grained point sets for feature representation and introduce outlier penalties to penalize outlier points. The high‐quality sample assignment module measures the classification and localization ability, orientation quality, and point‐wise correlation of point sets comprehensively to enhance the consistency of classification and regression significantly. Experiments on the DOTA and FAIR1M datasets demonstrate that the proposed method achieves significant improvements over the benchmark model. [ABSTRACT FROM AUTHOR]

Deep convolutional neural networks based remote sensing change detection has recently shown significant performance improvement. However, small region changes and global‐local features in high‐resolution remote sensing images are not fully explored. This paper introduces a hybrid U‐shaped and transformer network for change detection in high‐resolution remote sensing images. Specifically, a UNet++‐based backbone to facilitate feature learning across different scales. In addition, we introduce a transformer‐based feature fusion module for extracting long‐range dependencies, which can enhance the representation ability of the network. Furthermore, the introduced efficient channel attention mechanism can efficiently calibrate the feature representation and concentrate on more important feature information. Thanks to the above designs, the proposed method enjoys a strong ability to extract local and global features for remote sensing change detection. Extensive experimental results on different remote sensing images show that our method can achieve superior performance in comparison with state‐of‐the‐art change detection methods. [ABSTRACT FROM AUTHOR]

In recent years, the task of maritime emergency rescue has increased, while the cost of time for traditional methods of search and rescue is pretty long with poor effect subject to the constraints of the complex circumstances around the sea, the effective conditions, and the support capability. This paper applies deep learning and proposes a YOLOv5s‐SwinDS algorithm for target detection in distress at sea. Firstly, the backbone network of the YOLOv5s algorithm is replaced by swin transformer, and a multi‐level feature fusion module is introduced to enhance the feature expression ability for maritime targets. Secondly, deformable convolutional networks v2 (DCNv2) is used instead of traditional convolution to improve the recognition capability for irregular targets when the neck network features are output. Finally, the CIoU loss function is replaced with SIoU to reduce the redundant box effectively while accelerating the convergence and regression of the predicted box. Experimenting on the publicly dataset SeaDronesSee, the Precision$Precision$, Recall$Recall$, mAP0.5$mAP_{0.5}$ and mAP0.5−0.95$mAP_{0.5-0.95}$ of YOLOv5s‐SwinDS model are 87.9%, 75.8%, 79.1% and 42.9%, respectively, which get higher results than the original YOLOv5s model, the YOLOv7 series of models, and the YOLOv8 series of models. The experiments verifies that the algorithm has good performance in detecting maritime distress targets. [ABSTRACT FROM AUTHOR]

This paper proposes a new method for hierarchical image segmentation based on the nonsymetry and anti‐packing pattern representation model (NAM) and the hierarchical density‐based spatial clustering of application with noise (HDBSCAN). The proposed framework consists of two phases. In the first phase, a super‐pixel generation algorithm base on NAM is proposed. In the second phase, instead of defining an affinity matrix to merge similar regions using spatial clustering, the distance matrix defined by different region features is directly fitted into an HDBSCAN clustering module in order to merge similar regions efficiently. Similar adjacent regions can be merged into larger ones progressively and form a segmentation dendrogram for image segmentation with the clustering module. The experiments show that the proposed algorithm has a comparable or even better performance compared to the state‐of‐the‐art hierarchical image segmentation algorithms while having much less time and memory consumption. [ABSTRACT FROM AUTHOR]

Computer vision‐based fire detection algorithms have been extensively researched over the past decades as they offer reliable and efficient solutions to early fire detection, as well as economical solutions in outdoor environments. The proposed systems have different levels of complexity; nevertheless, they rely heavily on colour based fire segmentation as the first processing stage using different colour spaces. This paper presents a new flame‐based colour space which accentuates the difference between fire and non‐fire pixel values. The hybrid Artificial Bee Colony‐Teaching Learning‐based Optimisation (ABC‐TLBO) and the k‐medoids clustering algorithm along with a Feature image constructed manually from a wide dataset of fire and non‐fire pixels were used to deduce the optimised colour space conversion matrix. The latter can then be used to transform the RGB pixels from a camera feed into the new Flame‐based colour space for a more efficient fire segmentation. The proposed colour space is capable to separate fire and non‐fire pixels into two intensity classes, whereby the resulting between‐class variance is significantly widened; this maximises the effectiveness of the binary thresholding to separate fire from non‐fire pixels. The experimental results demonstrate that the proposed flame‐based colour space provides a superior average qualitative and quantitative performance on benchmark datasets compared to state‐of‐the‐art colour models; a 20% average increase in F1 score demonstrates a better balance between fire detection and false alarm rates. Moreover, the computation time of the fire detection system is faster by 15.6% in average. The proposed system provides a better implementation of the colour‐based fire segmentation processing stage in vision‐based fire detection systems; it vindicates, in this application context, the superiority of flame‐tuned colour space over conventional ones. [ABSTRACT FROM AUTHOR]

Firstly, the Canny operator combined with circle fitting is used to position the working surface. Secondly, the median filter and the Laplacian operator are selected for preprocessing. Due to uneven illumination, surface texture, or environmental dust, the extracted scratches exhibit fragmentation, and traditional morphological operations cannot handle scratches well, so an improved Canny operator combined with probabilistic Hough transform is proposed for scratch connection. A bidirectional connection is introduced to optimize the edge detection process of the Canny operator, and a parallel algorithm is introduced to shorten the detection time. Finally, the standard Hough transform needs to traverse the entire parameter space, and the calculation is complicated, and the probability Hough transform is selected. The experimental results show that compared with the traditional Canny algorithm, the precision, recall, and F1‐score of the improved Canny algorithm are increased by 3.2%, 13.2%, and 6.0%, respectively. After adding parallel processing, the average detection time was reduced by 45 ms. Finally, the accuracy of scratches extracted using this algorithm reached 97.96%, the leak rate, and mistake rate of this study are only 3.33% and 2.00%, which provides a more accurate and efficient theoretical support for the research on brake disc scratch detection. [ABSTRACT FROM AUTHOR]

Aircraft coating process has been an important part in manufacturing process of modern aviation products. For coating defect detection, the manual observation with naked eyes is usually utilized, which leads to low production efficiency. In this paper, the authors propose the improved YOLOv5‐OBB with the channel‐spatial attention block (CSAB), feature pyramid non‐local module (FPNM) and structured sparsity slimming criterion (SSSC). The CSAB can pay more attention to effective channel information features from the channel dimension and the target information area from the spatial dimension. The effective non‐local module called FPNM is proposed to further improve the detection accuracy. The authors utilize the oriented bounding boxes (OBB) to reduce redundant background information for coating defect detection. In addition, the SSSC is proposed to achieve network slimming and trade‐off between the efficiency and accuracy. The experimental results on several datasets demonstrate the effectiveness of the authors' scheme, which achieves superior performance. [ABSTRACT FROM AUTHOR]

More accurate methods for crop row detection benefit intelligent operation of agricultural machinery, especially avoiding mishandling or crushing crops. For achieving such a target, a traditional method combining the ExGR exponents, Otsu algorithm, Canny method, Hough transform and DBSCAN clustering analysis is proposed so that centerlines of crop rows can be detected effectively without manual intervention. Specifically, ExGR exponents are first adopted to gray green plants. The threshold of binarization will be further obtained by the Otsu algorithm. Further adopting the edge detection algorithm (Canny), edges of crops can be determined. Finally, combining the Hough transform and DBSCAN clustering analysis, the crop row detection is effectively available. Utilizing these methods, numerical simulation and their comparisons with existing methods are also achieved. For example, the Canny algorithm is relatively accurate than the Suzuki algorithm as well as their combinations with a geometric center extraction method if the density of weed is high. Compared with the K‐means clustering method, the DBSCAN algorithm is more suitable to characterize crop rows optimally in more complex conditions. It is validated from experiments that the combination of Canny algorithm, Hough transform and DBSCAN clustering is better than other mentioned traditional methods. [ABSTRACT FROM AUTHOR]

The quality of the rebar thread head is crucial for the connection between the rebars, thereby affecting the public safety of the building. The edge extraction of the thread image is the most important step in obtaining the accurate size parameters, which helps to complete online inspection of quality. Here, an edge detection method based on improved Canny operator is proposed to solve the problems on sensitivity to noise, existence of false edges, and lack of self‐adaptability. Firstly, an improved adaptive median filtering algorithm is used to denoise the image. Then replace Sobel with Scharr to enhance the gap between pixel values, add 45° and 135° directional templates to prevent edge information loss as well. Besides, introduce a scale factor to improve the interpolation method for non‐maximum suppression and reduce false edges. Finally, use Ostu operator to achieve adaptive extraction of high and low thresholds to complete adaptive edge detection. The qualitative analysis and quantitative results show that the improved algorithm can not only have a good visual effect, have good robustness and feasibility, but also be faster than other algorithms, which provide a basic guarantee for real‐time online quality detection of the thread head. [ABSTRACT FROM AUTHOR]

In open networks, the geometric deformation and common image processing are common image manipulation modes, which pose a great challenge in robust watermarking. To improve the robustness of GRHFM‐based watermarking, a watermarking algorithm based on the fast GRHFM calculation method and ant colony optimization (ACO) based fractional parameter selection method is proposed. With the similarity between the discrete Fourier transform and GRHFM moment calculation, the algorithm utilizes fast Fourier transform to improve the GRHFM calculation accuracy and speed. To select the optimal GRHFM fractional parameter for watermarking algorithm, ACO is introduced to the fractional parameter adaptive selection method. Here, the fast Fourier transform‐based calculation method is combined with the adaptive parameter selection method to maximize the invisibility and robustness of watermarking. The experimental results indicate that the algorithm achieves higher robustness with the same payload and invisibility compared with other existing watermarking methods. [ABSTRACT FROM AUTHOR]

In the medical image processing domain, deep learning methodologies have outstanding performance for disease classification using digital images such as X‐rays, magnetic resonance imaging (MRI), and computerized tomography (CT). However, accurate diagnosis of disease by medical personnel can be challenging in certain cases, such as the complexity of interpretation and non‐availability of expert personnel, difficulty at pixel‐level analysis, etc. Computer‐aided diagnostic (CAD) systems with proper training have shown the potential to enhance diagnostic accuracy and efficiency. With the exponential growth of medical data, CAD systems can analyze and extract valuable information by assisting medical personnel during the disease diagnostic process. To overcome these challenges, this research introduces CX‐RaysNet, a novel deep‐learning framework designed for the automatic identification of various lung disease classes in digital chest X‐ray images. The core novelty of the CX‐RaysNet framework lies in the integration of both convolutional and group convolutional layers, along with the usage of small filter sizes and the incorporation of dropout regularization. This phenomenon helps us optimize the model's ability to distinguish minute features that reveal different lung diseases. Additionally, data augmentation techniques are implemented to augment the training and testing datasets, which enhances the model's robustness and generalizability. The performance evaluation of CX‐RaysNet reveals promising results, with the proposed model achieving a multi‐class classification accuracy of 97.25%. Particularly, this study represents the first attempt to optimize a model specifically for low‐power embedded devices, aiming to improve the accuracy of disease detection while minimizing computational resources. [ABSTRACT FROM AUTHOR]

Intelligent electrospun pH indicators were produced from bio‐nanocomposite kafirin‐polyethylene oxide (PEO) containing red beetroot extract. The aim was to evaluate the performance and stability of the electrospun pH indicators via image processing. Red beetroot extract was added to a mixture of kafirin and PEO at various concentrations. The mixtures were electrospun, and infrared Fourier transform spectroscopy confirmed the presence of kafirin, PEO, and red beetroot extract in the resulting pH indicator. The results showed that the pH indicators had high stability and reversibility at different temperatures, pHs, and environmental conditions. The results showed that the color of the indicators was significantly reversible after pH changes, with highly desirable reversibility observed at pH values of 1, 3, 4, 5, 7, 9, and 10. The findings proved that the red beetroot extract loaded bio‐nanocomposite pH indicator accompanied by evaluation of color characteristics through image processing technique, can serve as a time‐efficient, accurate tool for detecting and tracking pH changes caused by food spoilage. [ABSTRACT FROM AUTHOR]

Depth estimation from monocular panoramic image is a crucial step in 3D reconstruction, which is a close relationship with virtual reality and metaverse technologies. In recent years, some methods, such as HRDFuse, BiFuse++, and UniFuse, have employed a two‐branch neural network leveraging two common projections: equirectangular and cubemap projections (CMPs). The equirectangular projection (ERP) provides a complete field of view but introduces distortion, while the CMP avoids distortion but introduces discontinuity at the boundary of the cube. In order to address the issue of distortion and discontinuity, the authors propose an efficient depth estimation fusion module to balance the feature mapping of the two projections. Moreover, for the ERP, the authors propose a novel inflated network architecture to extend the receptive field and effectively harness visual information. Extensive experiments show that the authors' method predicts more clear boundaries and accurate depth results while outperforming mainstream panoramic depth estimation algorithms. [ABSTRACT FROM AUTHOR]

Inverse halftoning is a technology that converts a binary image into a continuous tone image. Due to the wide application of inverse halftoning, many scholars have proposed several deep convolutional neural networks (DCNN) to optimize their performance. According to the observation, there is still room for improvement in content generation and detail recovery of the inverse halftone images generated by using the existing methods. Therefore, an inverse halftoning method based on supervised DCNN is proposed in this paper. The method consists of two parts: the multi‐level feature extraction model uses the down‐sampling to extract the features from the halftone image and remove the halftone noise dots on flat areas, which is implemented by four convolutional layers; the image reconstruction model uses up‐sampling to reconstruct image information, which is realized by four convolutional layers and two dense residual blocks. At the same time, in order to further recover the details, the down‐sampling feature maps and up‐sampling feature maps of the same size are concatenated by addition layers. Experimental results show that compared with other methods, the inverse halftone images obtained by the proposed network have better results in both subjective and objective evaluations. [ABSTRACT FROM AUTHOR]

Hazy images suffer from two problems. The low contrast can be enhanced by estimating a transmission layer, and the colour cast can be restored by estimating an airlight. These two variables, together with the albedo layer, are the constitutive elements of a hazy image. The resulting quality of dehazed images is inextricably linked to the accurate estimation of these components. However, it is ill‐posed to decompose these variables from a single image. As such, this paper presents an innovative algorithm intended to facilitate the optimal decomposition of a hazy image. Using the Markov random field model, an optimal framework is established that allows the simultaneous estimation of the three components across the three‐colour channels. To improve the visual quality, three improvements are proposed in the variational solution for the optimal components. The dehazed result is recomposed from the components with the transmission enhanced to circumvent any potential artefacts or information loss. Extensive experiments on natural images corroborate that the proposed algorithm outperforms state‐of‐the‐art dehazing methods, both qualitatively and quantitatively. [ABSTRACT FROM AUTHOR]

Image inpainting aims to repair the damaged region according to the known content in the damaged image. Recently, image inpainting methods have poor effects on high‐resolution damaged images, and the research on the inpainting of large‐area damaged images is limited. Therefore, this paper proposes an image inpainting method based on Generative Adversarial Networks (GAN) inversion and autoencoder. This work consists of two phases: first, the authors design an autoencoder‐based GAN, which learns the mapping from noise to low‐dimensional feature maps by training a generator, and then converts the generated feature maps into high‐resolution images. Thus, the difficulty of learning the mapping relationship is reduced. Second, the authors adopt the learning‐based GAN inversion to infer the closest latent code. The trained GAN is then used to reconstruct the complete image. Finally, the authors compare their method with other classical methods on the CelebAMask‐HQ, Flickr‐Faces‐HQ, and ImageNet datasets. According to the quantitative comparison, when the mask range is large, in other words, when the image has a large area of damage, the authors' method is superior to the comparison methods. According to the qualitative comparison, the structure of the high‐resolution image inpainted by the authors' method is more reasonable and the texture details are more realistic. [ABSTRACT FROM AUTHOR]

Single image dehazing in real scenarios is still a particularly challenging task due to the large domain discrepancy between synthetic and real hazy images. To address this problem, the dual‐route domain‐aware adaptation framework with the bridging domain is proposed. First, inspired by the effective multistage strategy in low‐level tasks, the bridging domain is constructed with the color‐preserved adaptive histogram equalization to facilitate the adaptation and improve the performance of real hazy images. Second, the totally shared structure is relaxed and the residual dual‐path domain‐aware modules (RDDM) for synthetic and the bridging domains are proposed, which facilitates extracting the domain‐specific haze information with the different parameters. Third, a half‐cyclic constraint is proposed for the unsupervised hazy images to avoid structure distortion during the unsupervised adversarial training process. Finally, for convenience in the inference stage, feature enhancement modules (FEM) are proposed for the original real hazy images to learn the pre‐process operation in the training stage. Extensive qualitative and quantitative experiments demonstrate that the proposed method significantly improves the dehazing performance on synthetic and real hazy images. [ABSTRACT FROM AUTHOR]

With technological developments, the resolution of the display systems is increasing, causing image data to increase. Several technologies are aiding in optimizing these data during transmission and storage while maintaining quality. Still, the internal data transmission for accessing the memory sub‐system during reading and writing cycles consumes significant power while requiring large memory for storage, which is inefficient, especially for portable displays. Hence, this work investigates the feasibility of reducing data through approximation for images in different formats and resolutions for human and computer vision based applications. Different image quality assessment metrics are utilized for performance evaluations with optimum image quality assessment selection according to application requirements. In addition, the feasibility analysis is conducted for three different applications as examples of computer vision. The experimental analysis highlights theoretical and industrial importance by showing that image data can be reduced from 25.0% to 62.5%, while satisfying requirements for HVS‐based and computer vision‐based applications. [ABSTRACT FROM AUTHOR]

The development of all‐in‐one devices for artificial visual systems offers an attractive solution in terms of energy efficiency and real‐time processing speed. In recent years, the proliferation of smart sensors in the growth of Internet‐of‐Things (IoT) has led to the increasing importance of in‐sensor computing technology, which places computational power at the edge of the data‐flow architecture. In this study, a prototype visual sensor inspired by the human retina is proposed, which integrates ferroelectricity and photosensitivity in two‐dimensional (2D) α‐In2Se3 material. This device mimics the functions of photoreceptors and amacrine cells in the retina, performing optical reception and memory computation functions through the use of electrical switching polarization in the channel. The gate‐tunable linearity of excitatory and inhibitory functions in photon‐induced short‐term plasticity enables to encode and classify 12 000 images in the Mixed National Institute of Standards and Technology (MNIST) dataset with remarkable accuracy, achieving ≈94%. Additionally, in‐sensor convolution image processing through a network of phototransistors, with five convolutional kernels electrically pre‐programmed into the transistors is demonstrated. The convoluted photocurrent matrices undergo straightforward arithmetic calculations to produce edge and feature‐enhanced scenarios. The findings demonstrate the potential of ferroelectric α‐In2Se3 for highly compact and efficient retinomorphic hardware implementation, regardless of ambipolar transport in the channel. [ABSTRACT FROM AUTHOR]