Search

The bandwidth adaptation factor (BAF), which is calculated as BW • (λ L - λ H): (d • f r), is a crucial evaluation parameter for designing ultrathin broadband absorbers. In this paper, a high BAF absorber is designed by utilizing an impedance frequency selective surface (FSS), which includes a six pinnacles FSS, a La-doped mullite ceramic dielectric layer and a metal backplane. The optimal numbers of pinnacled FSS is determined through comparison and optimization, and the power monitor results indicate that the main loss modes are electrical and ohmic loss. Subsequently, the impedance analysis reveals that the favourable absorption performance is attributed to good impedance matching and high loss coefficient. Furthermore, the observation of the current distribution on the surface confirms that the primary loss appears at the pinnacles. The proposed absorber has below −10 dB reflectivity in 12.26–18.00 GHz. Meanwhile, the BAF is 3.36 and the thickness is only 0.061 λ L (1.5 mm). The measured results are in good agreement with the simulation results, demonstrating an excellent BAF characteristic. [ABSTRACT FROM AUTHOR]

In this paper, Er3+ doped TeO 2 -ZnF 2 -BaF 2 -KF-Ta 2 O 5 tellurite glasses with low hydroxyl content (∼0.03 × 10−19 cm−3) were investigated employing both glass composition and glass melting process optimization. The Raman spectra and physical properties were characterized to analyze the structure of the glasses. Under the pumping of 980 nm LD laser, intense up-conversion fluorescence at 1.5 and 2.7 μm of samples and their lifetimes were detected and analyzed, and the related transition mechanisms with gradient-varying Er3+ doping concentrations were discussed. The maximum absorption and emission cross section at 2.7 μm was calculated to be 6.4 × 10−21 cm2 and 6.8 × 10−21 cm2, correspondingly, which were higher than those of traditional tellurite glasses. Using the calculated and measured spectroscopic parameters of bulk tellurite glass, a dual-wavelength pumping model was established to verify the feasibility of mid-infrared laser output in similar tellurite glass fiber. Experimental results support the assertion that the Er3+ doped tellurite glasses hold promise as a candidate laser gain medium for mid-infrared fiber laser systems. [ABSTRACT FROM AUTHOR]