Search

Developing new forms of flexible zinc–air (Zn–air) batteries is crucial to economic growth. Nevertheless, the absence of an oxygen evolution reaction catalyst with high catalytic efficiency and low-cost causes instability of Zn–air battery cycling and economic unviability, respectively. In this paper, a leaf-like N-doped carbon structure with CoS2 nanoparticles self-supported on carbon fiber paper (CoS2-CZ@CFP) was developed as an air electrode for Zn–air batteries, which not only uses nonprecious metal elements, but also has a self-supporting configuration, enhancing the contact between the catalyst and electrode while facilitating the transfer of electrons. Sulfur as the source gas was introduced into Co-doped metal–organic skeletons (Co-ZIFs) anchored on carbon fiber paper (CFP) for in situ vulcanizing transition metal Co, which successfully ensures the uniform distribution of sulfide particles in the carbon matrix, hence enriching active catalyst sites. The CoS2-CZ@CFP demonstrated an overpotential of 1.611 V at J = 50 mA cm−2, superior to RuO2@CFP (1.814 V). A Zn–air battery fabricated using the synthesized CoS2-CZ@CFP exhibited an extended life cycle of 117 h. This research paves the way for a novel method of designing self-supporting configurations of sulfides and carbon matrix composites as promising air electrodes applicable to Zn–air batteries. [ABSTRACT FROM AUTHOR]

It is significant to develop low-cost and highly efficient electrocatalysts for the hydrogen evolution reaction (HER) via electrochemical water splitting. Herein, we constructed P-doped NiCo2S4 nanowire arrays on carbon fiber paper (NiCo2S4−xPx/CFP) as a HER electrocatalyst in both acidic and alkaline media. Benefitting from P doping into NiCo2S4, the as-prepared NiCo2S4−xPx/CFP exhibits low HER overpotentials of 80 and 132 mV in acidic and alkaline media at a cathodic current density of 10 mA cm−2, respectively, which are far superior to counterparts of NiCo2S4 nanowire arrays on the carbon fiber paper (NiCo2S4/CFP). Meanwhile, the NiCo2S4−xPx/CFP presents excellent HER stability of 20 hours in acidic and alkaline media. From the results of density functional theory calculations, P doping can not only optimize the hydrogen adsorption energetics on each kind of atomic site of catalysts, but also strengthen the H2O molecule binding ability on the catalyst surface for the alkaline HER and favor kinetics of hydrogen adsorption and H2 formation on the catalyst surface for the acidic HER, eventually improving overall HER performances. The investigation of the HER mechanism modulated by P doping in our work offers novel inspiration to develop highly efficient ternary metal sulfides for the HER. [ABSTRACT FROM AUTHOR]

A well-designed support material between catalyst and substrate can always significantly enhance the performance of an electrode on water oxidation. In this work, a functional Ni and N-doped carbon layer (NNC) was designed on carbon paper (CP) via pyrolysis by using a controlled electrodeposited polyporphyrin as a precursor. Consequently, the fabricated NiFe-LDH/NNC/CP achieved a catalytic current density of 100 mA cm−2 at a small overpotential of 231 mV with a low Tafel slope of 26.0 mV dec−1, as well as high durability for more than 360 h. The insights are that N-doping reinforces the hydrophilicity and the catalyst binding capacity, while Ni-doping intensifies the conductivity. [ABSTRACT FROM AUTHOR]

Searching and developing earth-abundant electrocatalysts with predominant activity and favorable stability are significant to resolve increasing environmental pollution and serious energy crisis. In this paper, Mo-based nanowire arrays (NWAs) were synthesized on carbon fiber paper (CFP), and then Ru–MoP NWAs/CFP was successfully assembled through impregnation of Ru and phosphorization. The as-obtained Ru–MoP NWAs/CFP exhibited excellent performance over a broad pH range. As a result, overpotentials of 39.0, 49.9, and 67.1 mV were required to reach the current density of 10 mA cm−2 in 0.5 M H2SO4, 1 M KOH, and 1 M PBS, respectively. The outstanding performance of Ru–MoP NWAs/CFP is mainly related to the introduction of Ru and P atoms, which may enhance the conductivity of the catalyst and develop additional HER active sites. Our work may afford a novel designing approach to develop high performance HER electrocatalysts. [ABSTRACT FROM AUTHOR]

The urea oxidation reaction (UOR), which possesses a low theoretical potential and superior kinetics, is an attractive substitute for the anodic oxygen evolution reaction (OER) in overall water splitting; however, the implementation of hydrogen production in overall urea splitting is impeded by the deficiency of highly efficient, durable and cost-effective catalysts. Herein, we fabricated an Ni2P–MoP2 heterostructure with a hierarchical structure grown on carbon paper (Ni–Mo–P/CP), which exhibited robust activity and outstanding durability for the electrocatalytic oxidation of urea. The Ni–Mo–P/CP catalyst possessed an ultralow potential of 1.39 V to obtain the current density of 100 mA cm−2, small Tafel slope (27 mV dec−1) and long-term durability with almost no decay within 15 h. The experimental characterization revealed that the optimized electronic structure and the synergistic effect of abundant exposed active sites in the Ni–Mo–P/CP catalyst contribute to the efficient UOR catalytic activity. This work enriches the candidate catalysts for the UOR and promotes the industrial development of hydrogen production. [ABSTRACT FROM AUTHOR]

Nowadays, the goal of carbon peaking and carbon neutrality has become a global consensus, and electrochemical CO2 reduction to provide high-value power fuel is one of the major technical approaches attracting significant research interests and application prospects. However, the inevitable hydrogen evolution reaction in water-based electrolyte systems crowds out the reactive sites of active metals, causing a low CO2 conversion efficiency. In this work, Zn nanosheets were prepared via electrodeposition on the surface of carbon paper and then modified with polytetrafluoroethylene (PTFE) to tune the wetting angle of the electrolyte. A CO faradaic efficiency of 90.2% was achieved for Zn NS-8% PTFE (contact angle: 136.8°) at the electrolytic voltage of −1.0 V vs. RHE along with an overall current density of −7.9 mA cm−2. Experimental results and molecular dynamics simulation revealed that PTFE weakened the aggregation of H2O molecules and was more beneficial for capturing and adsorbing CO2 molecules near the electrode surface. The active sites of hydrogen production were transformed into the reaction center for electrocatalytic CO2 reduction due to the hydrophobicity of the electrode, and the accumulation of the local CO2 concentration accelerated the kinetic activity for electrochemical conversion (CO2 to CO). This strategy of tuning the local environment offers an alternative approach for effective electrode manufacturing in liquid electrolytes. [ABSTRACT FROM AUTHOR]

Bimetallic two-dimensional (2D) metal–organic framework (MOF) materials display excellent electrocatalytic performance due to the synergistic effect between metals and the advantage of the 2D structure. In this work, Cu was introduced into the 2D Co-MOF structure, and a 2D book-like CuCo-MOF structure was fixed on carbon fiber paper (CFP) for direct electrochemical glucose detection and oxygen evolution reaction (OER). The materials showed good electrocatalytic glucose detection performance with a sensitivity as high as 6.861 mA mM−1 cm−2 and a detection limit as low as 0.12 μM. For the OER, when the current density is 10 mA cm−2, the overpotential (η) is 340 mV, and good stability is maintained for about 10 h without current attenuation. This work not only exploits a new 2D MOF structure containing Cu, but also expands the potential of Cu-containing MOF materials in the electrocatalytic OER, making a contribution to the field of energy conversion and biomolecular sensing. [ABSTRACT FROM AUTHOR]

Developing high-efficiency electrocatalysts for the hydrogen evolution reaction (HER) is of great importance. In this paper, dendrite-free Ni–Cu catalysts were synthesised via one-step pulse electrodeposition under a weak magnetic field (0.5 T). Regardless of the direction of the magnetic field, the ions were affected by the magnetohydrodynamic (MHD) effect, which greatly promoted the mass transfer and dispersion uniformity, and suppressed the uncontrollable agglomeration by electrodeposition. It was found that the nucleation mechanism changed from progressive nucleation under a 0 T magnetic field to instantaneous nucleation under a 0.5 T magnetic field. Large-scale (325 nm, 0 T) dendrite growth on the single-sided plane was successfully suppressed, and replaced by smaller (90 nm, 0.5 T) and uniformly distributed cluster growth around the carbon paper. In addition, the (111) plane was strengthened by the magnetic field. Electrochemical analysis showed that the Ni–Cu catalysts exposed more surface area and exhibited greatly enhanced catalytic activity, which only needed −57.3 mV to deliver the current density of 10 mA cm−2 with a small Tafel slope of 99.4 mV dec−1 in 1 M KOH. Overall, magneto-electrodeposition, especially under weak magnetic field conditions, provides great promise for the preparation of HER catalysts. [ABSTRACT FROM AUTHOR]

Benefiting from a high overpotential of the competitive hydrogen evolution reaction with a carbon paper cathode, the desired electrochemical reduction of imines was achieved with high faradaic efficiency by using H2O as a H-source. With this sustainable atom-economic strategy, a series of potentially versatile amines were obtained in medium-to-high yields (49–86%). [ABSTRACT FROM AUTHOR]

Here, polyaniline (PANI) is reported loaded on carbon paper to modify the carbon paper-PANI-Pt electrode surface, tailoring the electrocatalytic capability towards the hydrogen evolution reaction and ethanol oxidation reaction. The reasons for the enhancement by the PANI layer are attributed to the hydrophilic electrode surface, uniform dispersion of Pt, and large electrochemical active surface. [ABSTRACT FROM AUTHOR]