Search

While many studies have been conducted regarding wind-driven Ka-band scattering on the ocean and sea surfaces, few have identified the impacts of Ka-band scattering on small inland water bodies, and fewer have identified the influence of wind on coherence over water. These previous studies have been limited in spatial scale, covering only large water bodies >25 km2. The recently launched Surface Water and Ocean Topography (SWOT) mission is the first Ka-band InSAR satellite designed for mapping water surface elevations and open water areas for rivers as narrow as 100 m and lakes as small as 0.0625 km2. Because measurements of these types are novel, there remains some uncertainty about expected backscatter amplitudes given wind-driven water surface roughness variability. A previous study using the airborne complement to SWOT, AirSWOT, found that low backscatter and low coherence values were indicative of higher errors in the water surface elevation products, recommending minimum thresholds for backscatter and coherence for filtering the data to increase the accuracy of averaged data for lakes and rivers. We determined that the global average wind speed over lakes is 4 m/s, and after comparing AirSWOT backscatter and coherence data with ERA-5 wind speeds, we found that the minimum required speed to retrieve high backscatter and coherence is 3 m/s. We examined 11,072 lakes across Canada and Alaska, with sizes ranging from 350 m2 to 156 km2, significantly smaller than what could be measured with previous Ka-band instruments in orbit. We found that small lakes (0.0625–0.25 km2) have significantly lower backscatter (3–5 dB) and 0.20–0.25 lower coherence than larger lakes (>1 km2). These results suggest that approximately 75% of SWOT observable lake areas around the globe will have consistently high-accuracy water surface elevations, though seasonal wind variability should remain an important consideration. Despite very small lakes presenting lower average backscatter and coherence, this study asserts that SWOT will be able to accurately resolve the water surface elevations and water surface extents for significantly smaller water bodies than have been previously recorded from satellite altimeters. This study additionally lays the foundation for future high-resolution inland water wind speed studies using SWOT data, when the data become available, as the relationships between wind speed and Ka-band backscatter reflect those of traditional scatterometers designed for oceanic studies. [ABSTRACT FROM AUTHOR]

• Ratios of E-CHAIM model-to-RISR radar measured electron density are close to one at heights near F2 peak. • On average, E-CHAIM underestimates electron density at ionospheric topside and bottomside by ∼ 20 % • E-CHAIM underestimations are strongest in summer and equinoctial nighttime at bottomside and in autumn nighttime at topside. In this study, predictions of the E-CHAIM ionospheric model are compared with measurements by the incoherent scatter radars RISR at Resolute Bay, Canada, in the northern polar cap. Reasonable coverage was available for all seasons except winter for which no conclusions were drawn. It is shown that ratios of the model-to measured electron densities are close to unity in the central part of the F layer, around its peak. This is particularly evident for summer daytime. Distributions of the ratios are wider for other seasons indicating larger number of cases when the model underestimates or overestimates. E-CHAIM underestimates the electron density at ionospheric topside and bottomside by ∼ 10–20 %. At the bottomside, the underestimations are strongest in summer and equinoctial nighttime. At the topside, the underestimations are strongest in autumn nighttime. Model overestimations are noticeable in the middle part of the F layer during dawn hours in autumn. Overall, the model tends to not predict highest-observed peak electron densities and the largest-observed heights of the peak. [ABSTRACT FROM AUTHOR]

Lake ice thickness (LIT), a thematic product of lakes as an essential climate variable (ECV), is sensitive to changes in air temperature and on-ice snow mass. Here, a novel and efficient analytic method (retracking approach) is presented for the estimation of LIT from Ku-band (13.6 GHz) radar altimetry data. The new retracker, referred to as ${{\mathtt {LRM}}\_{}{\mathtt {LIT}}}$ , is based on the physical modeling of the conventional radar echoes (also called low-resolution mode or LRM) over ice-covered lakes that show a characteristic step-like feature in their leading edge attributed to the reflection of radar waves at the snow–ice and ice–water interfaces. The method is applied to Jason-2 and Jason-3 data acquired over Great Slave Lake, Canada, over three ice seasons (2013–2016). As expected, the agreement between the Jason-2 and Jason-3 LIT estimates over their overlapping period (2016 ice season) is excellent with a mean bias error of 0.013 m and root mean square error (RMSE) of 0.024 m. LIT estimates from ${{\mathtt {LRM}}\_{}{\mathtt {LIT}}}$ are in good agreement with simulations from a thermodynamic lake ice model and in situ measurements with RMSE values of the order of a few centimeters for the three winter seasons. The retracker also provides a robust way to assess the accuracy of LIT estimates which is in the order of 0.10 m when the ice cover is well established and prior to melt onset. In addition, ${{\mathtt {LRM}}\_{}{\mathtt {LIT}}}$ captures the seasonal transitions during the freeze-up and breakup periods and ice growth over different winter seasons, making it a promising method for monitoring inter-annual variability and trends in LIT from past and current conventional radar altimetry missions. [ABSTRACT FROM AUTHOR]

The performance of constant false alarm rate (CFAR) detectors is often severely degraded in clutter edge and under multiple target interference. CFAR detection in the above environments often uses generalised likelihood ratio method or mean ratio method to find out the clutter edge demarcation line and suppress the sharp increase of false alarm rate, or remove the interference and modify the threshold factor to suppress the interference and improve the detection performance, but this sacrifices the detection gain from the number of clutter samples. In this paper, the feature information is fused to construct feature vectors, and the edge location is judged by the modulus of the cross product of the feature vector pair (MCPFVP), this edge demarcation line detection method fusing with features can be implemented without the need of clutter statistical distribution information. In addition, this paper reconstructs the sea clutter masked by multiple target interference by fusing the sea clutter amplitude correlation information, and these reconstructed sea clutter samples are used for power estimation together with the unmasked sea clutter without changing the threshold factor. This method can not only suppress the target masking effect of multiple target interference as the censoring type CFAR detector, but also maintain the detection gain from the number of clutter samples, which is not possible with the traditional censoring type CFAR detector. In addition, the relative weighted ratio summation (RWRS) is proposed to detect the multiple target interference, which takes into account the asymmetry of the shape of the statistical distribution. Both simulated and real sea clutter data are used to validate the above methods. The measured data are obtained from radar data collected at Yantai Yangma Island, China, Darmouth, Canada and Grimsby, Canada. (The latter two datasets are collected by the IPIX radar - Ice Multiparameter Imaging X-Band Radar). [ABSTRACT FROM AUTHOR]