Search

The study investigates four paper-based materials designed for short-time wrapping of meat products by determining morpho-structure, capillary-hydroscopic, barrier and antibacterial properties, wettability and migration into food simulants. The paper-based materials are coded as RO, SP, IT and SLO. RO and SLO samples exhibit the best barrier properties against water vapors. The low solubility and contact angles of RO, IT and SLO in A simulant (distilled water) make them suitable for aqueous food storage. The extremely high solubility of SP and SLO in simulant B (acetic acid) shows that wax and hydrophobized starch, respectively are carried by the acidic media, thus these agents are unlikely to coat the paper designed to package acidic food. SLO inhibits E. coli, Salmonella enterica, Lysteria monocytogenes, Pseudomonas aeruginosa and fluorescens. Polyethylene coated on RO and IT surface and wax impregnated on SP have a lower antimicrobial activity in comparison with hydrophobized starch coated on SLO. [ABSTRACT FROM AUTHOR]

Poor response rate, self-selection bias, and item noncompletion negatively impact the generalization of results from surveys. This study examined differences in these factors between a paper and online survey among allied health clinicians. Clinicians within a large local health district were initially invited to complete the Research Capacity in Context Tool online via an e-mail link. Following a lower-than-expected response rate, potential selection bias, and item noncompletion, the survey was readministered in paper form to the same cohort of clinicians 6-12 months later. The response rate to the paper survey was higher than to the online survey (27.6% vs. 16.5%). Selection biases were evident, characterized by seniority and discipline: Junior clinicians responded at rates significantly less than expected to the online survey but as expected to the paper survey. Occupational therapists, speech pathologists, and podiatrists responded more highly to the online survey, while other disciplines responded more highly to the paper survey. The rate of item noncompletion was higher for online than paper survey (6.72% vs. 3.8% questions not completed, respectively), with patterns of noncompletion also differing. These data suggest paper surveys are likely to produce less biased and more generalizable data from allied health clinicians. [ABSTRACT FROM AUTHOR]

This essay examines the historical role of graphic maps and plans in the Parisian municipal bureaucracy during the nineteenth century. Maps and plans became an important means to consolidate and organize administrative activities related to the built environment. As recognition of the growing number of actors involved, laws were implemented requiring not only an image to build but requiring that they be orthographic. The emergence of orthographic images in building practices was not a consequence of the specific needs of construction per se but rather was informed by the social and political exigencies to standardize diverse practices, to coordinate a variety of actors, and to develop a centralized administrative structure to manage urban development. Yet, even with the strong motivation for conformity, maps and plans were impossible to fully standardize due to the particularities of each site. Accordingly, it was this tension that encouraged the production of ever more paperwork as the basis of an urban bureaucracy. [ABSTRACT FROM AUTHOR]

This introduction to this special section, "Cities on Paper: On the Materiality of Paper in Urban Planning," explores the vital role played by paper documents in the practice of urban planning linked to the shaping of modern cities in Europe and the United States during the nineteenth and twentieth centuries. This introductory essay considers recent literature on the materiality of paper to show the significance of examining the visual and written information transcribed on its surface in concert with assessing how it has been assembled, organized, reproduced, circulated, distributed, and archived. By exploring such uses of paper documents in urban planning practices, such cartography, arboriculture, maintenance, and the production and dissemination of expert knowledge, the five essays in this section demonstrate the relevance of the material culture of paper within the municipal and national bureaucracies that spearheaded dramatic urbanization campaigns in modern cities. [ABSTRACT FROM AUTHOR]

Variations in wood properties such as basic density, tissue proportion, fibre dimensions and their derived indices, cellulose and lignin content of Melia dubia at five age gradations were examined to evaluate the suitability of the species for pulp and paper production. The study showed that basic density, fibre proportion, fibre length, cell wall thickness, slenderness ratio, solids factor, cellulose and lignin content increased with tree age. However, vessel proportion, fibre width and lumen width decreased. Most of the wood properties were found suitable for making good quality pulp and paper at the age of 4 and 5 years in comparison to other hardwood species among five age gradation. Hence, harvesting at fourth and fifth year of age is suggested in M. dubia for high pulp yield and better paper quality. [ABSTRACT FROM AUTHOR]

Raman spectroscopy and micro-Raman mapping have been used to study the distribution of different chemical components at the surface of coated papers. The paper coatings contain organic nanoparticles with a structure of poly(styrene-co-maleimide) and encapsulated vegetable oils. Raman spectroscopy is able to differentiate between various types of oil, i.e., polyunsaturated, monounsaturated, or saturated, and indicates that the degree of imidization and reactivity of the oil (amount of free oil) complement each other. The surface mapping over large areas (5 × 5 mm2) illustrates good homogeneity of the coating layer and even surface coverage. The imide and oil are homogeneously distributed within the coating itself without a tendency for agglomeration. The covered areas of imide and oil mostly overlap for polyunsaturated oils, while larger amounts of oil occur outside the imide zones for monounsaturated and saturated oils. The latter indicates that the oil is partly "free" within the coating and acts as a continuous binder phase. The surface mapping over smaller areas (1 × 1 mm2) shows the coating and cellulose covered areas are complementary. The surface maps confirm that interaction between the coating and paper substrate happens through hydrogen bonding. Heterogeneities in the coating are due to the presence of remaining ammonolyzed maleic anhydride precursors forming amic acid moieties. The organic phase, oil phase, and cellulose substrate can also be differentiated by principal component analysis of the surface maps. [ABSTRACT FROM AUTHOR]

Giving paper and polymer photochromic properties under laser irradiation is challenging due to the low resistance of these materials to heat, their flexibility, and their possibly irregular structure. However, we could successfully deposit TiO2/Ag/ TiO2 layers stacking on flexible white glossy paper and transparent polyethylene terephalate (PET) substrates using a reactive magnetron sputtering technique, and tailor coloration changes after laser irradiation, alternating visible and ultraviolet (UV) wavelengths. The sample colors are characterized by a panel of chromas depending on the irradiation conditions. We demonstrate that these chroma changes are due to morphological changes of Ag nanoparticles (NPs) after visible laser irradiation of the colored as-deposited sample. The process exhibits a good reversibility after subsequent UV irradiation due to the growth of new metallic Ag NPs. The colors displayed in diffuse reflection by the paper samples are more saturated than the ones displayed in regular transmission by PET samples. We demonstrate the efficiency of the photochromic process on such support by printing high resolution patterns exhibiting different colors depending on the observation conditions. [ABSTRACT FROM AUTHOR]

In an age where the world is becoming ever more aware of paper consumption, educators are turning toward technology to cut back on paper waste. Besides the environmental reasons, a paperless music classroom helps students develop their musicianship in new and exciting ways. This article will look at the considerations for setting up a paperless music classroom by examining hardware, software, and hybrid models for the music classroom. [ABSTRACT FROM AUTHOR]