Search

Due to its unique magnetic circuit structure, the synchronous reluctance motor (SynRM) exhibits significant cross-saturation effects during operation, posing challenges for accurate control and performance optimization of the motor. This paper presents a method for identifying cross-saturation characteristic parameters and an improved mathematical modeling method for the nonlinear changes in SynRM parameters caused by magnetic circuit self-saturation and cross-saturation in the static state of the motor. Offline stand still tests are conducted to acquire characteristic data of the motor under different saturation levels. Subsequently, neural networks learn the complex relationships between input currents and output flux linkages, while numerical optimization techniques refine the extracted parameters to minimize model discrepancies. These identified parameters are then integrated into an enhanced mathematical model that effectively incorporates cross-saturation effects. The accuracy and effectiveness of the proposed model are rigorously validated through comprehensive comparisons with finite element analysis (FEA) results and further simulations. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Machine Tool & Hydraulics is the property of Guangzhou Mechanical Engineering Research Institute (GMERI) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Harbin Institute of Technology. Social Sciences Edition / Haerbin Gongye Daxue Xuebao. Shehui Kexue Ban is the property of Harbin Institute of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Using first-principles calculations based on density-functional theory, this paper investigates the electronic structure and magnetic properties of the Heusler alloy Mn2LiGe bulk and its (001) surfaces. The Mn2LiGe bulk is demonstrated to be inverse Heusler alloy with space group of F43m and lattice constant of 5. 87 Å. A direct band gap with a width of 1. 1 eV near the Fermi surface of the spin-down channel is detected. The Mn2LiGe bulk possesses stable half-metallic and magnetism in the lattice constant range of 5. 55 - 6. 33 Å. In addition, six different surface structures of Mn2LiGe are constructed in this paper. The first layer atoms on the surface undergo different displacements, increasing the surface roughness. Due to surface effects, the magnetic properties of atoms on the surface are different compared to those in the bulk. Both the MnA MnA and MnB MnB surface structures have the highest magnetic moments, while the LiLi and the GeGe surface structures have the lowest magnetic moments. Electronic structure calculations show that the half-metallic band gap present in the bulk is destroyed in all six surface structures and the spin polarization is weakened in varying degrees. Only the LiLi surface structure maintains up to 99. 9% of the surface spin polarization, making the surface an excellent prospect for applications in spintronic devices. [ABSTRACT FROM AUTHOR]

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Chinese Journal of High Pressure Physics is the property of Chinese Journal of High Pressure Physics Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Synthetic Fiber Industry is the property of Sinopec Baling Petrochemical Company and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Compared with wet magnetic separation, dry magnetic separation has the advantages of saving water resources, short beneficiation process, less equipment investment, less floor space and low beneficiation cost. The grade of iron ore resources in China is getting lower and lower, and the dispersed grain size is line, so it is urgent to develop dry magnetic separator for line-grained materials. According to the structure and working principle of various types of dry magnetic separators, they are divided into several types, such as magnetic-gravity combined dry magnetic separator, direct feeding wind-gravity- magnetic combined dry magnetic separator, wind feeding dry magnetic separator and so on. Magnetic gravity combined dry magnetic separators mainly include fixed magnetic system barrel dry magnetic separator, double roll high intensity dry magnetic separator, bet rotating magnetic field dry magnetic separator, double ring moving magnetic system dry magnetic separator, dry high intensity magnetic plate separator, dry screen high intensity magnetic separator, vibrating high gradient dry magnetic separator and other typical types. Dred feeding wind-gravity-magnetic combined dry separator mainly includes wind drum dry magnetic separator, wind feeding dry magnetic separator, cylinder fluidized dry magnetic separator, three-stage dry permanent magnet cylinder magnetic separator? wind-magnetic coupling dry magnetic separator? dry wind-magnetic separator? wind-gravity-magnetic combined force field magnetic separator and other typical types. Wind feeding dry magnetic separator mainly includes wind feeding plate magnetic separator? new dry wind-magnetic combined magnetic separator? dry wind permanent magnet concentrator? wind feeding dry permanent magnet magnetic separator and other types. The structure? magnetic separation principle? characteristics and application scope of more than 20 kinds of dry magnetic separators are introduced? and the advantages and disadvantages of various dry magnetic separators are analyzed. [ABSTRACT FROM AUTHOR]

The magnetically driven sample experiments which were carried out in an intense pulsed power device were simulated and analyzed by two-dimensional magnetically driven simulation code (MDSC2), and the structure coefficient of magnetically driven sample experiments was studied and analyzed. The numerical results show that MDSC2 can correctly simulate experiments of magnetically driven samples such as tin and magnesium-aluminum alloy. The simulated sample/window interface velocity (or flyer plate/window interface velocity) is basically consistent with the experimental measured one. The structure coefficients of magnetically driven samples are usually different when the magnetically driven sample experiments are different. The structure coefficient of magnetically driven sample experiment is related to the initial conditions such as the sample material and the width of the electrode plate but not to the initial thickness of the sample material. Under the same initial conditions, such as the thickness of the flyer plate, the material of the flyer plate, the material of the sample, the initial gap between the cathode and the anode, the wider the electrode plate, the larger the structure coefficient of the magnetic drive sample experiment. MDSC2 can correctly simulate the magnetically driven sample experiments, which makes MDSC2 an important tool for the study of magnetically driven sample experiments. [ABSTRACT FROM AUTHOR]

Copyright of Machine Tool & Hydraulics is the property of Guangzhou Mechanical Engineering Research Institute (GMERI) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

BACKGROUND: Changes in skeletal muscle mass have been indicated in studies addressing the effects of low-frequency pulsed magnetic fields on the structure and morphology of the skeletal muscle, but no relevant studies have been conducted on the morphologic changes that occur after chronic exposure to the lowfrequency pulsed magnetic field. OBJECTIVE: To observe the effects of chronic exposure to low-frequency pulsed magnetic fields on the maximal voluntary contraction and morphologic indicators of the quadriceps muscle of the leg, thereby providing a reference of muscle morphologic changes for the use of this technique as a strategy for muscle function improvement. METHODS: Seventy healthy subjects were recruited and randomly divided into a test group that received magnetic field stimulation and a control group that underwent sham treatment, with 35 subjects in each group, and the total duration of the trial was 4 weeks. The test group underwent low-frequency pulsed magnetic stimulation for 15 minutes every 48 hours, while the control group underwent sham treatment, with the same intervention interval and duration as the test group. After 4 weeks of intervention, changes in the maximum voluntary contraction value of the quadriceps muscle in different groups were observed, and B-mode ultrasonography was utilized as a means of assessment to observe changes in muscle thickness, muscle cross-sectional area, and pinnation angle indexes. RESULTS AND CONCLUSION: After 4 weeks of chronic exposure to low-frequency pulsed magnetic fields, 68 subjects completed the test. The maximum voluntary contraction value of the quadriceps muscle in the test group increased significantly (P=0.000), and the increment was significantly higher than that of the control group (P=0.008). Three indexes related to muscle morphology in the test group were significantly higher than the pre-test values (P=0.000), while in the control group, muscle thickness showed a significant reduction (P=0.020), there was no significant change in the pinnation angle, but a significant increase in the cross-sectional area (P=0.000). Intergroup comparisons revealed that the three indicators related to muscle morphology, including muscle thickness (P=0.012), pinnation angle (P=0.003), and cross-sectional area (P=0.049), were significantly higher in the test group than in the control group. The above data confirmed that the maximum voluntary contraction of the quadriceps muscle was significantly increased in healthy adults after 4 weeks of chronic exposure to the low-frequency pulsed magnetic field, and significant increases in the three muscle morphometric indices of muscle thickness, cross-sectional area, and pinnation angle were observed in the test group, providing a basis of muscle tissue morphology for the use of this technique as an exercise alternative and medical treatment strategy for muscle improvement. [ABSTRACT FROM AUTHOR]

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Lubrication Engineering (0254-0150) is the property of Editorial Office of LUBRICATION ENGINEERING and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A flux focusing magnetic gear with Z-type pole-pieces (ZP-FFMG) was presented and investigated. In this magnetic gear structure, the proposed Z-type pole-pieces can couple the magnetic flux of the end face and cylindrical face of rotors. The 3D simulation shows that there are axial and radial magnetic flux components in the ZP-FFMG, which are helpful to torque transmission. A comparative analysis of traditional flux focusing magnetic gear (FFMG) and ZP-FFMG was given. The results show that compared with the traditional FFMG, the transmission torque of the ZP-FFMG is increased by 42%, the torque density is increased by 15 kN⋅m/m³, and the magnetic flux density is also improved. [ABSTRACT FROM AUTHOR]

In this paper, a new nonanuclear terbium cluster {Tb9 (L)4 (μ4-OH)2 (μ3-OH)8 (μ2-OCH3)4 (NO3)8 (H2O)8} (OH)·2H2O(1) was synthesized by 2,6-dimethoxyphenol (HL) and Tb(NO3)2·6H2O. The cluster was characterized via XRD, elemental analysis, infrared spectrum and thermogravimetric analysis. The magnetic property were also studied. X-ray single-crystal diffraction analysis indicates that the cluster is orthorhombic, the space group is I222, the crystal cell parameters are a = 1. 532 8 (3) nm, b = 1. 796 9 (4) nm, c = 1. 863 5 (4) nm, α = β = γ = 90°, V = 5. 132 6 (19) nm³. The nonanuclear skeleton formed by metal centers in the cluster that connected by μ4-OH and μ3-OH presents an interesting hourglass like topology. The central Tb ion has a slightly twisted tetragonal pyramid geometry, while the other Tb ions have a slightly deformed dodecahedral configuration. Magnetic investigations reveal that the weak antiferromagnetic interactions between adjacent metal ions exist in cluster 1, but no obvious slow magnetic relaxation behavior is shown due to the rapid magnetic quantum tunneling effect. [ABSTRACT FROM AUTHOR]

Copyright of Electric Power Automation Equipment / Dianli Zidonghua Shebei is the property of Electric Power Automation Equipment Press and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Lubrication Engineering (0254-0150) is the property of Editorial Office of LUBRICATION ENGINEERING and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electric Drive is the property of Electric Drive Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Materials Engineering / Cailiao Gongcheng is the property of Journal of Materials Engineering Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Using first principles calculations based on the density functional theory, we systematically studied the magnetic and ferroelectric properties of two-dimensional monolayer C2 X2TM (X=O, H; TM=Fe, Cr), where monolayer oxidized/hydrogenated graphene is intercalated by transition metal atoms Fe and Cr. Considering the electron in-situ Coulomb interaction and spin orbit coupling, the stable structure and ground state magnetic structure of two-dimensional monolayer C2 X2TM are obtained. The changes of magnetism, energy band, ferroelectric polarization and electronic structure of C2 X2TM under different strains are studied in detail. The results show that the barrier height and energy gap of the system can be effectively controlled by adding biaxial strain, but the chiral counterclockwise antiferromagnetic structure is remained. It is found that C2O2Cr at 25% strain and C2 O2Fe at 30% strain monolayer films have ferroelectric polarization and reversal barriers similar to those of two-dimensional ferroelectric materials such as GeS. These results indicate that C2 O2Fe (Cr) monolayer film is a new two-dimensional multiferroic material with coexisting ferroelectricity (FE) and antiferromagnet (AFM) order. [ABSTRACT FROM AUTHOR]

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Lubrication Engineering (0254-0150) is the property of Editorial Office of LUBRICATION ENGINEERING and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Materials Engineering / Cailiao Gongcheng is the property of Journal of Materials Engineering Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Surfactant Detergent & Cosmetics (1001-1803) is the property of China Surfactant Detergent & Cosmetics Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

MOF-919 was first synthesized by using2+ and Fe3+ as bimetallic center, and lH-pyrazol-4-carbonsure as organic ligand. Then, a novel magnetic porous nano-catalyst (MOF-919 *) was prepared through the high-temperature pyrolysis of MOF-919 under inert environment. The morphology, component, internal pore structure and magnetic property of MOF-919 were characterized by using SEM, XRD, BET and VSM. The results showed that MOF-919 * possessed abundant mesoporous structure and exhibited good catalytic performance for p.nitrophenol with the reaction rate constant of 0. 546 min-1Moreover, the excellent magnetic property and reusability endow MOF-919 * with good application prospect in practical application. [ABSTRACT FROM AUTHOR]

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Hebei University of Science & Technology is the property of Hebei University of Science & Technology, Journal of Hebei University of Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Four resonance compensation topologies equivalent circuit models for magnetic field coupling resonance wireless power transfer system (primary side series and secondary side series type, primary side series secondary side parallel type, primary side parallel secondary side series type and primary side parallel secondary side parallel type) was constructed. The efficiency characteristics of magnetic field coupling resonance wireless power transfer system was analyzed. The influence of coupling coefficient and quality factor on system efficiency was studied. The simulation results showed that the secondary side resonance compensation topology had a greater impact on the system efficiency, and the system efficiency was more sensitive to changes in the coupling coefficient and quality factors. Compared with the secondary side using the series compensation topology, the system had a wider range of high transfer efficiency when the secondary side used the parallel compensation topology. The experimental results verified the correctness of the simulation results. [ABSTRACT FROM AUTHOR]

A full‐sized rotor magneto‐rheological damper structure is designed based on a kind of inlay coil shear valve structure, and an optimization method of the magnetic circuit structure parameters is proposed by correlating structural parameters with magnetic circuit parameters. Based on the improved Bingham model, the parameterized damper characteristic mathematical model of full‐sized rotor magneto‐rheological damper is established. By performance test and test verification on samples, impacts of structure parameter, motion parameter and current parameter on magneto‐rheological damper performance are studied. By comparing the damping performance curve of the stimulation model with the test curve, we find that the stimulated computation model is complained with the test model, and the performance of samples is stable, which proves that the simulation method has great practical value. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Tiangong University is the property of Journal of Tianjin Polytechnic University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The traditional electromagnetic torque sensor can measure the torque by measuring the torsion angle at both ends of the shaft through electromagnetic induction. Therefore, a suitable coil structure model is established. Aiming at the phenomenon that the induction EMF of the traditional single coil structure is weak, the magnetic field focusing parameters are analyzed, the excitation coil structure is optimized. Through the ANSYS Maxwell simulation analysis, the three - dimensional magnetic field nephogram of the vertical component of the magnetic field strength of different groups of coils is obtained, and the optimal coil structure model is obtained by using the algorithm to optimize the magnet structure and improve the coil structure. According to the analysis of the magnetic field simulation results, the improved coil is 26. 9 times of the traditional single coil structure magnetic field strength, which is approximately consistent with the theoretical derivation value. The peak value of the magnetic field energy is concentrated in the region of about 2. 4 mm² The induction electromotive force of the receiving coil is 17. 63 times of that of the traditional single coil structure when it rotates with the axis, showing the same cycle change as the rotation cycle, and the effect is obviously improved. [ABSTRACT FROM AUTHOR]

Copyright of China Sciencepaper is the property of China Sciencepaper and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Clean Coal Technology is the property of Clean Coal Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Coal Science & Technology (0253-2336) is the property of Coal Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Food Research & Development is the property of Food Research & Development Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Ｔｏ ｓｏｌｖｅ ｔｈｅ ｐｒｏｂｌｅｍｓ ｏｆ ｌｏｗ ｅｆｆｉｃｉｅｎｃｙ ａｎｄ ｐｏｗｅｒ ｆａｃｔｏｒ ｏｆ ｍｏｔｏｒ ｂｙ ｔｈｅ ｌｏｗ ｕｔｉｌｉｚａｔｉｏｎ ｒａｔｅ ｏｆ ｗｉｎｄｉｎｇ ｍａｔｅｒｉａｌｓ ｏｆ ｒｉｎｇｗｉｎｄｉｎｇ ｉｎｄｕｃｔｉｏｎ ｍｏｔｏｒ，ａ ｄｏｕｂｌｅｒｏｔｏｒ ｒｉｎｇｗｉｎｄｉｎｇ ｉｎｄｕｃｔｉｏｎ ｍｏｔｏｒ ｗａｓ ｐｒｏｐｏｓｅｄ． Ｔｈｅ ｓｔｒｕｃｔｕｒｅ ｃｈａｒａｃｔｅｒｉｓｔｉｃｓ，ｔｈｅ ｍａｇｎｅｔｉｃ ｃｉｒｃｕｉｔ ｃｈａｒａｃｔｅｒｉｓｔｉｃｓ ａｎｄ ｔｈｅ ｃｉｒｃｕｉｔ ｃｈａｒａｃｔｅｒｉｓｔｉｃｓ ｏｆ ｄｏｕｂｌｅｒｏｔｏｒ ｒｉｎｇｗｉｎｄｉｎｇ ｉｎｄｕｃｔｉｏｎ ｍｏｔｏｒ ｗｅｒｅ ａｎａｌｙｚｅｄ． Ｂａｓｅｄ ｏｎ ｔｈｅ ａｎａｌｙｓｉｓ ｒｅｓｕｌｔｓ，ｔｈｅ ｄｅｓｉｇｎ ｍｅｔｈｏｄ ｏｆ ｔｈｅ ｍｏｔｏｒ ｗａｓ ｐｕｔ ｆｏｒｗａｒｄ． Ｔｈｅ ｂａｓｉｃ ｓｉｚｅ ｏｆ ｔｈｅ ｍｏｔｏｒ ｗａｓ ｄｅｔｅｒｍｉｎｅｄ ｂｙ ｔｈｅ ｐｒｏｐｏｓｅｄ ｄｅｓｉｇｎ ｍｅｔｈｏｄ，ａｎｄ ｔｈｅ ｅｌｅｃｔｒｏｍａｇｎｅｔｉｃ ｐｅｒｆｏｒｍａｎｃｅ ｏｆ ｔｈｅ ｍｏｔｏｒ ｗａｓ ｓｉｍｕｌａｔｅｄ ｂｙ ｔｈｅ ｔｈｒｅｅｄｉｍｅｎｓｉｏｎａｌ ｆｉｎｉｔｅ ｅｌｅｍｅｎｔ ｓｉｍｕｌａｔｉｏｎ ａｎａｌｙｓｉｓ ｍｅｔｈｏｄ． Ｔｈｅ ｄｅｓｉｇｎｅｄ ｍｏｔｏｒ ｗａｓ ｃｏｍｐａｒｅｄ ｗｉｔｈ Ｙｔｙｐｅ ｔｒａｄｉｔｉｏｎａｌ ｉｎｄｕｃｔｉｏｎ ｍｏｔｏｒ ｗｉｔｈ ｔｈｅ ｓａｍｅ ｐｏｗｅｒ ａｎｄ ｐｏｌｅ ｎｕｍｂｅｒ． Ｔｈｅ ｓｉｍｕｌａｔｉｏｎ ｒｅｓｕｌｔｓ ｓｈｏｗ ｔｈａｔ ｔｈｅ ａｃｃｕｒａｃｙ ｏｆ ｔｈｅ ｄｅｓｉｇｎ ｍｅｔｈｏｄ ｏｆ ｄｏｕｂｌｅｒｏｔｏｒ ｒｉｎｇｗｉｎｄｉｎｇ ｉｎｄｕｃｔｉｏｎ ｍｏｔｏｒ ｃａｎ ｂｅ ｖｅｒｉｆｉｅｄ． Ｔｈｅ ｃｏｍｐａｒｉｓｏｎ ｉｌｌｕｍｉｎａｔｅｓ ｔｈａｔ ｔｈｅ ｄｏｕｂｌｅｒｏｔｏｒ ｒｉｎｇｗｉｎｄｉｎｇ ｉｎｄｕｃｔｉｏｎ ｍｏｔｏｒ ｉｓ ｍｏｒｅ ｅｆｆｉｃｉｅｎｔ ａｎｄ ｅｎｅｒｇｙｓａｖｉｎｇ． [ABSTRACT FROM AUTHOR]

Copyright of Journal of Drainage & Irrigation Machinery Engineering / Paiguan Jixie Gongcheng Xuebao is the property of Editorial Department of Drainage & Irrigation Machinery Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A new type of magnetic hierarchical carbonaceous sphere with nano-sized was prepared by hydrothermal synthesis under relatively mild conditions, and comprehensive investigation of the synthetic route was carried out in detail. The micro-structure such as surface morphology, particle size of the synthesized magnetic carbonaceous nanospheres were characterized by transmission electron microscopy(TEM)and scanning electron microscopy(SEM). The porous structure of magnetic carbonaceous nanomaterials was also characterized through the N2 adsorption-desorption isotherms. The functional groups on the surface of the magnetic hierarchical carbonaceous sphere were characterized by Fourier transform infrared(FT-IR)and X-ray fluorescence spectrometer(XRF). The characterization results show that the synthesized magnetic hierarchical carbonaceous sphere has typical hierarchical structure, and a large number of carboxyl functional groups on the surface which is available for nano-sized Zn2+ loading. The photocatalytic results show that the synthesized magnetic carbonaceous materials have excellent photocatalytic degradation of organic matter. And the magnetic hierarchical carbonaceous spheres also have excellent recyclability under magnetic field. [ABSTRACT FROM AUTHOR]

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Sciencepaper is the property of China Sciencepaper and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Clean Coal Technology is the property of Clean Coal Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)