Search

In order to improve the operational effectiveness of multi-sensor cooperative detection of carrier-bome fighter, based on the scene of air interception, according to the combat airspace from far to near, the scene model of the extended range search of carrier-borne fighter, the radar infrared fusion detection, the cooperative guidance of formation and radar multi-beam detection are established. In the over-the-horizon, medium-range and short-range search phase, the extended range detection, interference and multi-beam detection in the multi-sensor cooperative detection mode are simulated and analyzed. According to the different combat distance, the design of multi-sensor cooperative detection mode under the combat flow is innovatively carried out. [ABSTRACT FROM AUTHOR]

With the acceleration of urbanization, the intelligent transportation has received more and more attention. Among them, the use of depth completion technology to extract the depth information of objects plays an important role in the realization of vehicle target tracking, distance calculation between targets and other tasks. However, multi-source depth completion data collected in practice often have correlation bias, resulting in knotty errors. In this regard, this study studies the depth completion technology based on multi-source data association fusion. The proposed technology enhances the depth map by calculating multi-channel confidence, and performs more accurate point-by-point correlation between the image and the millimeter-wave radar point cloud data. By designing a multi-scale attention fusion module, the adaptive fusion of multi-granularity associated data is realized to generate high-quality depth maps. In this study, a large number of experiments have been carried out in the public nuScenes data set. The experimental results show that the mean absolute error of our method is 1.142 m, which is lower than the 1.472 m of the existing benchmark method. [ABSTRACT FROM AUTHOR]

In order to study the waveform selection of radar seeker in the terminal guidance and tracking phase, this paper proposes a waveform selection algorithm in the guidance and tracking process of cognitive radar seeker. Firstly, we establish the processing flow of radar seeker waveform selection by combining the seeker guidance and observation filtering models; Secondly, we use the interactive multiple model unscented Kalman filter (IMMUKF) algorithm to solve the nonlinear tracking problem. We minimize tracking error by searching for waveform parameters based on the maximum mutual information criterion. The simulation results show that the waveform selection algorithm can effectively improve the seeker tracking accuracy and provide stable guidance overload. [ABSTRACT FROM AUTHOR]

Through flexible configuration of warship formation, the Aegis Warship Formation achieves interception and defense of targets in different attack directions. Based on the warship coordinate system and target coordinate system, the detection and interception zone models of Aegis warship formation are constructed. The functional simulation models of guidance radar and SM-3 interceptor are integrated to propose a dynamic simulation modeling method for anti-missile defense of warship formations. The detection directional coefficient and killing directional coefficient are defined, which are used to quantitatively evaluate the directional characteristics of the formation anti-missile defense. The simulations are conducted with a typical case of two-ship Aegis formation, and useful conclusions are obtained. The results can provide support for battlefield offensive and defensive situation assessment. [ABSTRACT FROM AUTHOR]

To meet the needs of flight teaching and training, aiming at the interactive, multi-input multi-output and comprehensive sequential logic controlling characteristic of integrated avionics system display and control interface for fighters, a functional simulation method by designing display and control logic independently is introduced. On the basis of this structure, a loosely coupled, modular and visual simulation method of display and control interface for multi-function fire control radar is presented, and the realization of display and control logic based on Simulink/Stateflow is introduced. The application result shows that the program progress is more intuitive, and the code is more maintainable, so this design method can improve the fidelity and developing efficiency of display and control simulation. All these researches can provide technology reference for the simulation of display and control interfaces for avionics systems and its subsystems. [ABSTRACT FROM AUTHOR]

To address the problems of the traditional regional road network path guidance system, such as the difficulty to effectively plan the optimal solution of the path and poor stability, the immune genetic algorithm was applied to the path guidance system. It connects the radar devices, infrared beacon identification and other devices with the path-induced control center to construct the hardware environment of the induction system. Then the immune genetic algorithm was used to expand the encoding of different initial points to determine the encoding path. Finally the optimal induction path was designed through the process of data evaluation, chromosome determination, path judgment and weight evaluation by combining the results of hierarchical search method and restricted region search method. The results show that the stability of the path guidance system using the proposed method is better, and the stability can reach 0.979. The intelligent path guidance system based on immune heredity can effectively determine the optimal solution of vehicle driving path, and can successfully achieve the optimal path guidance. [ABSTRACT FROM AUTHOR]

To meet the demand of large number and high integration of filters in the IF filter modules of radar receivers, a miniaturization LC filter based on the 3D integration technology is proposed in this study. The application and integrating process of 3D LC filter in modules are studied and analyzed. The 3D LC filter adopts two substrates, and uses 3D integration process and BGA technology to realize the three-dimensional integrated assembly of the two substrates. High-density layout can be realized by placing capacitive elements on the bottom substrate. Inductive elements are placed on the top substrate and separated from the capacitive elements, and signal communication is achieved through solder balls. The use of a three-dimensional integration scheme can reduce the size of the LC filter circuit by nearly 50%, and the filter index is consistent with the performance of the planar filter circuit. Compared with the traditional IF filter component design method, this solution is more conducive to achieve high integration and miniaturization. [ABSTRACT FROM AUTHOR]