Search

Ultra high frequency (UHF) partial discharge (PD) detection is a common method for transformer oil-paper insulation defect location. However, the accuracy of PD positioning in practical application is easily affected by noise and sensor layout. In order to ensure the effectiveness of PD positioning detection of transformer oil-paper insulation defect, an UHF PD positioning detection platform for oil-paper insulation defects is established. Based on the conventional K-means method, a modified clustering demarcation PD anti-interference positioning method is proposed, which effectively reduces the positioning error. Aiming at the problem of sample clustering demarcation aliasing, when the optimal correction coefficient L is 1.1, the UHF PD positioning error can be reduced to less than 0.1 m, which verifies the effectiveness of the proposed method. Finally, the variation law of positioning error of different sensor layout is analyzed, and the optimal layout scheme of UHF sensor for transformer oil-paper insulation defect detection is proposed, which can provide reference for the layout and positioning of transformer on-line monitoring sensor.

A new method was proposed for point-of-care testing (POCT) of immunosuppressants in blood using thin-layer paper spray ionization and a miniature mass spectrometer. The aluminum thin-layer plate was used as paper spray substrate, and cut into an equilateral triangle. Aliquots of 10 μL blood sample were loaded on the aluminum thin-layer plate, and then 20 μL methanol was dropped as elution/spray solvent. The tip of the triangular plate was placed 1.0 cm in front of the discontinuous atmospheric pressure interface (DAPI) of the miniature mass spectrometer. When the spray voltage was applied, the sample was eluted from the triangular plate and formed paper spray ionization at the tip. Coupled with the miniature mass spectrometer, five immunosuppressants were detected under negative ion mode. The precursor ions ［M-H］- of tacrolimus, sirolimus, everolimus, ciclosporin A, and mycophenolic acid are m/z 802.6, 912.6, 957.1, 1 200.8, 319.1, and product ions are m/z 560.2 and 604.3, m/z 590.3 and 321.2, m/z 590.3 and 365.2, m/z 1 088.8, m/z 287.4 and 275.1, respectively. Based on the observed signal-to-noise ratio (S/N) of the most intense tandem mass spectrometry (MS/MS) fragment peaks and using the S/N=3 and 10 as the criteria, the limits of detection (LODs) and quantitation (LOQs) are estimated to be 0.5-5 mg/L and 1-10 mg/L, respectively. The internal standard method was used for quantitative analysis, and indapamide was used as the internal standard compound. Sufficient linearity for each analyte is obtained with the correlation coefficients (r) greater than 0.99. The proposed method displays good recoveries in the range of 91.0%-114.3% with the relative standard deviations (RSDs) less than 8.4%. Moreover, the developed method was used for the analysis of blood samples, which spiked with tacrolimus, sirolimus, everolimus, cyclosporine A and mycophenolic acid at the concentration of 100 mg/L. The analytical results demonstrated the consistency between the proposed method and the traditional liquid chromatography-mass spectrometry (LC-MS) method. The entire analysis procedure can be completed within 1 min. The proposed method is simple, fast, accurate, efficient, and suitable for POCT of immunosuppressants in blood.

BackgroundIn recent years, the rising number of e-cigarette users among adolescents and the surging cases of lung injury related to e-cigarette use have attracted the attention of researchers in various fields.ObjectiveTo identify the research hotspots and trends of e-cigarette or vaping product use associated lung injury (EVALI) worldwide from 2013 to 2022 by bibliometric and visual analysis. MethodsWeb of Science Core Collection was selected to obtain literature related to EVALI from 2013 to 2022 across the world, statistics were calculated by country/region, institution, author, journal, cited literature, keyword, etc. CiteSpace 6.2.R1 was used for visual analysis to draw diagrams of publication trend, author cooperation network, co-citation clustering time distribution, and keyword cluster. ResultsA total of 888 EVALI-related papers published between 2013 and 2022 were retrieved. The number of publications was gradually increased, with a significant increase in 2020 and a decrease from 2021, but the number of citations was increased year by year. The most active country was the United States (631 articles). European and American countries cooperated closely and the centrality was prominent. Among the publishing institutions, the University of California system topped the list with 103 articles. Rahman I (27 articles) published the most articles and had a high degree of centrality; Goniewicz M L was the most cited author; and the network analysis diagram showed relatively weak collaboration between authors. The American Journal of Respiratory and Critical Care Medicine was the journal with the highest number of publications (94 articles). The top 5 cited articles were all cited more than 300 times. The leading high-frequency keywords of EVALI-related studies were nicotine (149 times), exposure (118 times), and oxidative stress (80 times). The cluster of key nodes in the co-citation network and the clustering time distribution diagram indicated youth e-cigarette addiction received widespread attention from society. From the top 25 keywords with the strongest bursts, the focus of research on the pathogenesis of EVALI gradually shifted from the oxidative stress damage associated with e-cigarette vapor to the oxidative effect of flavoring chemicals in the process of lung injury. The current research interests in this field were mainly the mechanisms of various chemicals in e-cigarettes and the heating elements that led to damage to the lungs. ConclusionEVALI is receiving continuous attention from researchers in government, medical institutions, and other organizations. A variety of e-cigarette ingredients such as flavoring chemicals may lead to varying degrees of cytotoxicity, inflammation, and lung damage. However, the pathophysiology of EVALI remains unclear. In the future, more Chinese scholars should be encouraged to participate in this field.

Based on the selective quenching effect of the flavonoid rutin on the fluorescence of carbon dots prepared by asparagine pyrolysis, a method for rapid detection of rutin content in the flower buds of Sophora japonica by using chitosan-based carbon dot paper chip was developed. A filter paper was immersed in the casting solution of carbon dots and chitosan. After drying, a carbon dot chitosan film was formed on the surface of the filter paper, so that the chitosan-based carbon dot paper chip was obtained. After samples were dripped on the chip, chromogenic reaction occurred uniformly within a limited region, and pictures were taken under an ultraviolet (UV) lamp at 365 nm for analysis of the red (R), green (G), and blue (B) values of the colored spots in order to optimize the preparation conditions and detection conditions. The results showed that the optimal conditions were as follows: chitosan concentration of 20 mg/mL, carbon spot concentration of 1.0 mg/mL, 50% ethanol as sample solvent, and reaction time of 20 min. Under these conditions, the difference (ΔG) in G-value between sample and solvent spots had a linear relationship with rutin concentration (C) in the range of 4 to 120 mg/mL. Using this method, the average contents of rutin in the flower buds of S. japonica from three batches were determined to be 23.85%, 22.83% and 20.30%, the average relative standard deviations (RSDs) were 6.1%, 5.6% and 6.7%, and the recoveries were 91.27% to 107.5%, which were close to the results of high performance liquid chromatography (HPLC). The proposed method is simple and rapid, and can be used for rapid on-site determination of rutin content in the flower buds of S. japonica.

Results of academic research require publication and need to be reviewed by peers before they can contribute to the existing body of knowledge. Among the various means of publishing research findings, researchers may, according to past academic practices, first present their research results in conferences, seminars or symposiums, and then submit their results to journals for publication. Hence, the issue of “extended publication”, where conference papers are revised and submitted to journals, has gained attention in the library and information science community. This study collected public documents on the Internet and applied document analysis to examine the ethical considerations regarding such extension practice. First, this research reviewed the basic principles of research integrity and responsible behavior. Secondly, this research listed several types of violation related to research paper writing and submission, and studied the guidelines established by both domestic and foreign academic organizations, publishers, and journals. The findings of the research were used to provide specific recommendations on the best practices for extending conference papers to journal articles.

To explore the microscopic mechanism of thermal stability of oil-paper insulation， a molecular model consistent with the actual oil-paper insulation is established. Through comparison with the experimental results， the effectiveness of the model is verified. With temperature as an independent variable， variation of the mechanical parameters and hydrogen bond energy of the cellulose molecular model under the action of a thermal field is investigated. The results show that parameters characterizing the mechanical properties of cellulose， such as bulk modulus （K）， Young's modulus （E）， shear modulus （G）， and Poisson's ratio （v） of the cellulose crystalline zone model are larger than those of the amorphous zone model at the same temperature， and the distribution of hydrogen bond energy remains the same. Thus， the cellulose crystalline zone is superior to the amorphous zone in mechanical properties and determines the insulation properties of cellulose insulating paper. The results of the study provide a theoretical basis and method for investigating the microscopic mechanism of thermal aging of oil-paper insulation.

The insulation performance of transformer bushings is a crucial aspect that directly affects the safe operation of equipment. To diagnose the insulation status of transformer bushings and mitigate the impact of small-sample imbalanced data on diagnostic results, a particle swarm optimization combined with back propagation neural network (PSO-BPNN) and adaptive synthetic sampling (ADASYN) method are employed to fault diagnosis of transformer bushing. Initially, historical fault data of transformer bushings are gathered, and a sample set of dissolved gases in transformer oil with distinct fault categories is established. The ADASYN algorithm is used to synthesize the minority class samples in the original data, which allowed for obtaining balanced fault data. The balanced dissolved gases in oil served as the model input, and the fault status is used as the label output to diagnose the transformer bushings using the PSO-BPNN model. To diagnose the bushings under the original sample set, the back propagation neural network (BPNN), genetic combined with back propagation neural network (G-BPNN), cuckoo search combined with back propagation neural network (CS-BPNN), and PSO-BPNN models are used. The results reveal that the PSO-BPNN model based on ADASYN balanced data exhibited the highest accuracy among the various models for fault diagnosing the insulation status of transformer bushings. This approach effectively mitigate the impact of small sample imbalanced data on diagnostic results, and provide an effective method for assessing the insulation performance of transformer bushings.

[Purpose/Significance] Interdisciplinary research can creatively solve complex problems in natural environment and human society through knowledge integration and penetration. With the increase of interdisciplinary research results, the evaluation of interdisciplinarity becomes increasingly necessary. How to establish an effective method for interdisciplinarity measurement and achieve a comprehensive measurement of scientific research papers is an urgent problem to be solved. [Method/Process] Based on the above background, this study takes the data of scientific research papers as the analysis source, deconstructs the interdisciplinarity of scientific research papers from multiple dimensions, constructs the feature set of interdisciplinarity of scientific research papers, and on this basis proposes the method for measuring interdisciplinarity based on the adaptive method of machine learning, and conducts a comprehensive measurement of interdisciplinarity. This study has certain positive significance for researchers to understand the interdisciplinary papers in the field. The work process is as follows: First of all, the basic concepts of interdisciplinarity are sorted out and related concepts are discriminated, and the index of interdisciplinarity of different dimensions is analyzed. Based on the connotation and characteristics of interdisciplinary research, the characteristic index of interdisciplinarity of scientific research papers is extracted from three dimensions: subject attribute, knowledge network topology and knowledge integration text content. Secondly, an interdisciplinarity measurement method based on machine learning is constructed. By analyzing information gain and feature similarity of input indexes and data in feature sets, a feature selection calculation method based on adaptive feature selection is proposed, and the accuracy of feature classification is maximized by machine learning classifier. At the same time, the feature subset that can best express the interdisciplinary is selected based on the adaptive selection of the minimum number of features, and the selected adaptive feature set is used in the calculation of the interdisciplinary of the paper, and the results of the calculation of the original feature set are analyzed comprehensively. Finally, an empirical study was carried out in the field of plant nanobiotechnology to verify the effectiveness of the index system and adaptive feature selection listed above, identify and screen papers with high interdisciplinarity in the field, measure the interdisciplinarity of papers and identify key influencing factors based on the calculation of subject attributes, knowledge network topology and knowledge integration text content features. [Results/Conclusions] The main empirical results show that, among the subject attributes, the balance degree and the difference degree have a greater effect on the interdisciplinary evaluation. The overall effect of knowledge network topology structure features is satisfactory, the distribution breadth of knowledge integration text content features has a greater effect on interdisciplinary evaluation, and the calculation effect is further improved by fitness weighted summation of each feature. The results demonstrate that the adaptive feature selection proposed in this paper can effectively screen the interdisciplinary related feature indexes, improve the reliability of the results, and achieve a comprehensive and in-depth measurement of the interdisciplinary of scientific research papers. This measure method avoids the subjective defects that may occur in qualitative evaluation and the problems that different measure indicators may produce contradictory results. It provides a new idea and direction for interdisciplinary measurement.

New paper-based microfluidic technology has been widely used in many fields due to their advantages such as easy preparation, low cost, and non-toxic environmental protection, compared with the shortcomings of other food analysis and detection techniques such as complex production method and high cost of preparation. The outline of new paper-based microfluidic technology is briefly summarized and the probes including organic molecules, nanomaterials and polymers their structural activity with regard to sensing performances along with their limit of detection are also discussed. This review is expected to assist readers for better understanding of the sensing mechanisms of various chemo and bio-probes utilized in µPADs, as well as promote their advancement in the field. The detection mechanism and its advantages in the whole detection system at the same time to get the ideal experimental results of new paper-based microfluidic technology in the food analysis of pesticide residues, pathogenic bacteria, additives, heavy metals and other substances are mainly introduced. This study would provide the theoretical basis and references for fast detection field. The future challenges and application prospects of this technology are prospected.

“Lab on paper” is a paper-based microanalytical system with unique advantages such as high sensitivity, low cost, portability, and mass production, which breaks through the limitations of traditional detection technologies and shows great potential in the field of rapid on-site food detection. In this paper, the typical “labs on paper”, including chromatographic paper, chemical test chip, lateral flow assay (LFA), microfluidic paper-based analytical devices (μPADs), and synthetic biological paper, are systematically reviewed. Special emphasis is put on the application of “lab on paper” in the field of food detection. Finally, the advantages, challenges, and future prospects of paper-based analytic methods are discussed, which may provide theoretical support for better application of “lab on paper” in the field of food detection.

Fruit paper is a paper-shaped snack made from fresh fruit after pulping, boiling and drying. Drying, one of the oldest methods for food preservation, removes water from fruit and extends its shelf-life for year-round consumption. The most commonly used drying methods include hot air drying, vacuum drying, freeze drying, and their combinations. The energy efficiency of drying process and the quality of fruit paper are both important to be considered in fruit pulp drying. This article updates the research status of drying technologies applied in fruit paper production, including hot air drying, freeze drying, vacuum drying, microwave drying, infrared radiation drying, and refraction window drying. In addition, the influence of the pretreatments and drying process on fruit paper's shape, texture, and nutrients are also summarized. This work aims to improve the drying efficiency of fruit paper and retain the active ingredients of fruit to the maximum extent, and to provide reference for further research on drying processing of fruit paper in food industry.

Knowledge representation of scientific paper data is a problem to be solved,and how to learn the representation of paper nodes in scientific paper heterogeneous network is the core to solve this problem.This paper proposes an unsupervised cluster-level scientific paper heterogeneous graph node representation learning method(UCHL),aiming at obtaining the representation of nodes (authors,institutions,papers,etc.) in the heterogeneous graph of scientific papers.Based on the heterogeneous graph representation,this paper performs link prediction on the entire heterogeneous graph and obtains the relationship between the edges of the nodes,that is,the relationship between paper and paper.Experiments results show that the proposed method achieves excellent performance on multiple evaluation metrics on real scientific paper datasets.

The academic journals of meteorological science and technology of China take the solicitation of review meteorological scientific and technological paper (RMSTP) as an important way to improve their core competitiveness and bibliometric evaluation indicators. Therefore, high-quality RMSTPs are favored by journals, and many scientists are also stimulated to write RMSTP. In order to advise the authors to write a successful RMSTP, this paper first introduces the four principles of the topic for RMSTP, and divides RMSTP into two types: overview type and discussion type. It highlights the importance of writing motivation and the scopes of time, space, and topic for RMSTP, and provides the suggestion about how to express them properly in the paper. Meanwhile, taking three RMSTP's published in recent years as examples, this paper focuses on the problems that should be paid attention to in the text structure and its content expression, summary writing, and literature citation of RMSTP. Finally, it points out that writing a successful RMSTP requires the author to read large number of literatures and have rich scientific research and writing experiences. In addition, the authors needs to develop themselves to have the sensitivity and insights to the scientific frontiers and development trend of certain discipline or professional field, as well as the corresponding abilities of comprehensive analysis and reviewing.

Partial dampness is the initial stage in the bushing damp process,so the effective diagnosis of partial dampness can avoid the further development of the damp. The partial damp diagnosis method of bushing based on the frequency domain spectroscopy (FDS) is proposed in this paper. Firstly,oil-paper insulation samples with different moisture content are prepared,and partial damped samples are formed through combination. Then the FDS characteristics are obtained. The results show that partial distribution of moisture leads to oil-paper insulation interfaces with different moisture content,and the interface relaxation polarization loss peak is introduced in the FDS curves. The greater the degree of partial dampness in the radial direction,the greater the amplitude of the loss peak,and it moves to the high frequency direction. The effectiveness of the diagnosis of partial dampness of bushing based on the characteristics of the interface relaxation polarization loss peak is verified by the simulation model of the transformer bushing. It shows that a new method for early fault warning and diagnosis of the transformer bushing is provided.

In order to obtain the characteristic parameters of dampness status of resin impregnated paper (RIP),the time domain dielectric response technique is performed on the dampness status evaluation,and the RIP moisture contents are intensively studied based on polarization and depolarization current (PDC) method. Firstly,RIP insulation samples with different moisture contents are prepared in the laboratory and the PDC curves are measured. Then,the optimization algorithm combining genetic algorithm and interior point method is introduced,and the parameters of extended Debye model are obtained by Matlab simulation. Finally,two characteristic parameters of dampness status are extracted,which are the relaxation contribution coefficient of the maximum time constant branch A 9 and the stable depolarization charge quantity Q d-5000. Conclusions from the research results are as follows. The PDC curve moves upward as the moisture content increases. The dampness of the RIP insulation results in the increase of its conductivity and the decrease of its insulation resistance,absorption ratio andpolarization index. The parameters of the 9-branch extended Debye model are sensitive to the RIP insulation dampness status,and the A 9 shows a linear relationship with moisture content. The depolarization charge quantity is sensitive to moisture content,and the Q d-5000 shows an exponential relationship with moisture content.

In order to prolong the shelf life of fresh leaves of Perilla frutescens and ensure the storage quality of leaves during storage and retail, a newly developed coating fresh-keeping paper bag was used to package the leaves of Perilla frutescens in this study. The composite coating solution used in the experiment was prepared by dissolving chitosan, sodium D-isoascorbate, tea polyphenols and calcium chloride in acetic acid aqueous solution in a certain ratio. The effects of different component concentrations in the composite coating solution of fresh-keeping paper bags on the sensory quality, VC content and weight loss rate of Perilla frutescens were investigated by single factor and orthogonal experiments, and the optimal component concentration ratio of the composite coating solution was determined as follows: Chitosan concentration 2.0%, sodium D-isoascorbate concentration 2.4%, tea polyphenols concentration 0.25%, and calcium chloride concentration 0.6%. The physical, chemical and antibacterial properties analysis showed that when the coating amount was 30 g/m2, the composite coating solution had formed uniform coating on the surface of the paper. At this time, the coated paper had strong antibacterial ability, and the coating penetrated into the fiber gap of paper, so that the weight, thickness, elongation and moisture content of paper were improved, the water vapor permeability decreased, and the tensile strength and wettability decreased slightly, which met the packaging requirements of Perilla frutescens leaves and would have broad prospects for development in the field of fruit and vegetable packaging.

BackgroundBy analyzing the publication of scientific and technological papers of the provincial centers for disease control and prevention (CDCs) in China, we can understand their scientific research strength, dominant disciplines, research hotspots, and talent development, which is conducive for further optimizing the scientific research construction of the disease control system.ObjectiveTo conduct a bibliometric analysis and draw a visual map of the Chinese Science Citation Database (CSCD) sourced papers published by 31 provincial CDCs in China from 2011 to 2020, to understand the scientific research status of China's provincial CDC system in the past ten years.MethodsIn April 2021, China National Knowledge Infrastructure was used to retrieve CSCD sourced papers published by 31 provincial CDCs (excluding Taiwan Province, Hong Kong and Macau Special Administrative Regions) in China as the primary unit from 2011 to 2020, and finally 5231 CSCD papers were included. Bibliometric analysis indicators include number of CSCD papers published and financial support rate, proportion of CSCD papers to total Chinese papers, distribution of CSCD papers published in high-volume journals, and number of papers for a specific CDC that their first authors affiliated with. Citespace 5.8.R1 software was used to draw author's cooperation network map, keyword co-occurrence map, keyword clustering information table, and keyword emergence map.ResultsThe number of CSCD papers published every year showed a stationary trend, and the total funding rate was 61%, showing an year-by-year upward trend (increased from 49.3% in 2011 to 68.7% in 2020). Jiangsu Province, Fujian Province, and Beijing CDCs ranked the top three in the total number of CSCD papers contributed by a specific CDC. The Chinese Journal of Epidemiology, Chinese Journal of Public Health, Chinese Journal of Zoonoses, Chinese Journal of Preventive Medicine, and Chinese Journal of Endemic Diseases were the top five high-volume journals. The top three authors of CSCD papers (counted as co-authors) were Xu Bianli of Henan Provincial Center for Disease Control and Prevention (110 papers), Yan Yansheng of Fujian Provincial Center for Disease Control and Prevention (72 papers), and Wang Quanyi of Beijing Center for Disease Prevention and Control (71 papers), and they studied the epidemiology of parasitic diseases and infectious diseases, the prevention and treatment of natural epidemic diseases and AIDS, and the epidemiology of infectious diseases, respectively. The keyword co-occurrence map showed that AIDS, zoonotic diseases, hand-foot-mouth disease, etc. (frequency ≥90) were the key research directions of provincial CDCs in the past ten years. The keyword clustering categories were closely related, although there were subtle differences, the topics focused on virus and chronic disease research. The keyword emergence results suggested that the frontiers of research had gradually shifted from infectious diseases such as enterovirus, hantavirus, and Zika virus to food-borne diseases and chronic non-communicable diseases such as tumors and senile diseases over time.ConclusionThe number of papers issued by the provincial CDCs in China in the past ten years has shown an overall steady and rising trend. The leading themes of researchers and institutions are infectious diseases, parasitic diseases, etc., while food-borne diseases and elderly diseases are the hot frontiers.

In this paper, 1-methylcyclopropene (1-MCP) controlled release packaging paper was prepared by mixing 1-methylcyclopropene with different proportions of ethyl cellulose ether (EC) and polyacrylic acid (PAA) and then coating it on the paper base. The release mechanism was studied. Saimaiti apricot fruits stored at 2 ℃ were treated with 1-MCP controlled release packaging paper. The effects of 1-MCP controllable slow-release packaging paper on respiratory intensity, hardness, titratable acid, soluble solids, peel color and commodity rate of apricot fruit during storage were studied in order to obtain a kind of fresh-keeping paper which could effectively prolong the storage period of apricot fruit. The results showed that under the conditions of 95% RH, 2 ℃ and 80% polyacrylic acid (PAA), the particle collapse of 1-MCP powder made the gas release slowly, and the release mechanism parameter was 0.49, and the release rate increased with PAA content. Controlled release 1-MCP-coated paper could inhibit the arrival of the peak of respiration intensity of apricot fruit, delay the decrease of hardness, titratable acid and soluble solid content, and maintain the color of peel. The results showed that controlled release 1-MCP-coated paper could effectively maintain the quality of apricot fruits stored in low temperature environment, and would provide some reference for the application of controlled release 1-MCP-coated paper to the storage of other fruits and vegetables.

During the forming of aramid paper honeycomb sandwich component of aircraft composites in the autoclave, the structure bears thermo-mechanical coupling case, and it may exist the phenomenon of the honeycomb crack during the forming. The tensile, compressive, shear and thermal properties of aramid paper honeycomb core are obtained by testing. Meanwhile, the numerical simulation of thermo-mechanical sequential coupling of the whole honeycomb sandwich component and the local core area are carried out by combining the finite element analysis method and the inversion method. The results show that the thermal stress during the forming process will not cause the adhesive layer between honeycomb cells to crack, but gas pressure will. The difference value of pressure difference between honeycomb cells required for adhesive layer′s slight destruction and complete destruction is positively related to the initial normal fracture stress of adhesive layer. The pressure difference required for the adhesive layer′s complete destruction is decreased with the increase of the number of loaded cells.

Objective To establish a simple and rapid paper-based extraction method for human papilloma virus (HPV) DNA and to evaluate the method. Methods The plasmid containing HPV type 16 gene fragment was employed as the test subjects, and then 6 different paper materials were compared and selected by ultraviolet spectrophotometry and real-time fluorescence quantitative PCR (qPCR). Then, according to the efficiency of nucleic acid extraction and the optimal binding area, a convenient paper strip was designed. Finally, the designed paper strip was applied to extract HPV DNA from 18 clinical cervical exfoliated cell samples (13 positives and 5 negatives), with its performance being evaluated after comparing with the conventional boiling method. Results The qualitative filter paper with a nucleic acid binding zone of 2 mm×10 mm could successfully extract HPV DNA from clinical cervical exfoliated cells. When this test strip was used for DNA extraction, all the 13 high-risk HPV positives were successfully detected out of the 18 clinical samples, which was consistent with the results of the conventional boiling method. In addition, the extraction time of the test strip was less than 1 min for each sample, with a detection limit of 8×102 copies/mL and relative standard deviation of 1.15%. Conclusion Our paper-based rapid extraction for HPV DNA does not require pipetting, heating and centrifugation, and the eluent can be directly used as the PCR template for amplification, which greatly simplifies the extraction process of HPV DNA from clinical cervical exfoliated cell samples.

With the development of science and technology,people need to access a large number of scientific and technological information quickly,and scientific paper is one of the main ways to carry scientific and technological information.As an important part of scientific paper,abstract is an effective tool for readers to retrieve literature.Therefore,the quality of abstract affects the retrieval rate of paper directly.However,due to the lack of writing experience,the quality of abstracts written by many authors is not high.Automatic generation of summary for scientific paper can help the author grasp the important content of paper more effectively,so as to write high-quality abstract.At the same time,the automatically generated abstract can also control the number of words in the abstract,which can bring more content to readers and help them understand the paper better.Generating automa-tic summarization for scientific paper can help author write abstract faster,which is one of the research contents in automatic summarization.Compared with common news document,scientific paper has the characteristics of strong structure and clear logical relationship.As far as the mainstream abstractive summarization such as encoder-decoder model is concerned,it mainly consi-ders the serialized information in the document,and rarely explores the text structure information in the document.For this reason,according to the characteristics in scientific papers,this paper proposes an automatic summarization model based on the hie-rarchical structure of "word-section-document",which uses the association between word and section to enhance the level of text structure and the interaction between levels,so as to screen out the key information in scientific paper.In addition,a context gate unit is extended to update the optimized context vector,thus capturing context information more comprehensively.The experimental results show that the proposed model can effectively improve the performance of the generated summarization in the ROUGE evaluation method.

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

[Purpose/Significance] Since the outbreak of COVID-19, there has been a rapid increase in the number of studies related to COVID-19 at home and abroad. Review of relevant literature on COVID-19 provides data resources for related research on the emergence and transmission mechanism of SARS-CoV-2. However, the current COVID-19 related dataset is a collection of the literature, without classifying the data for each subfield, and the coarse-grained information such as the title and author fails to provide an in-depth understanding of the progress of COVID-19 research. Therefore, this paper created a dataset for the COVID-19 sub-domain and a fine-grained entity dataset. [Method/Process] Firstly, this paper proposed a literature screening method based on active learning model, which can obtain more valuable marker samples with less labor cost, so that the classifier has better generalization performance. We considered three base classifiers: Support Vector Machine (SVM), Logistic Regression (LR), and Random Forest (RF), while considering four query strategies: uncertainty sampling, expected error reduction, committee-based query, and random sampling. Taking the origin of SARS-CoV-2, one of the sub-fields related to SARS-CoV-2, as an example, articles related to the origin of SARS-CoV-2 were efficiently and accurately located from the literature. At the same time, this paper designed a labeling scheme covering 18 types of entities, including not only genes, proteins, compounds and other entities that are universal in the biological field, but also corona viruses and wild animals that are unique to the field of SARS-CoV-2. In this paper, visual annotation tool BRAT was used for entity annotation. The tagging team consisted of an administrator and six annotators, and the entity tagging consisted of two rounds. What's more, multi-k consistency index was used to calculate the consistency score of annotation results. [Results/Conclusions] The results of the active learning model show that the uncertain sampling query strategy has the best performance. SVM, LR and RF based on uncertain sampling can correctly screen 425, 465 and 489 articles, respectively. After the removal of overlapping articles, a dataset related to the origin of SARS-CoV-2 was constructed, containing a total of 885 articles. Secondly, based on the proposed entity labeling scheme, 6 annotators completed 99 papers. Based on the results of fine marking, this paper constructed an entity dataset containing 39,118 entities, which is the largest and most comprehensive entity corpus in the field of COVID-19.

An efficient surface enhanced Raman scattering(SERS)substrate was prepared by screen printing silver ink on drawing paper, white card paper and coordinate paper. The results showed that silver film/drawing paper represented the best SERS activity, followed by silver film/white card paper and silver film/coordinate paper. The minimum detection limits for crystal violet were 10-8, 10-7 and 10-7 mol·L-1, respectively. In addition, ten different positions were randomly selected on the same silver film/drawing paper surface, and the relative standard deviation values of the peak intensitiesat 913, 1 179 and 1 620 cm-1 were 13.2%, 12.5% and 10.6%, respectively, which indicated outstanding uniformity.

Random statistics samples of 605 papers in 50 issues including 18 core journals and 15 provincial journals of atmospheric science show that there are about 38% of the key words or abstract writing is not standardized. In order to improve writing quality of academic papers, the problems and solutions of key words and abstracts in atmospheric science papers were discussed. The main conclusions are as following. The key words mainly have shortcomings in such aspects as selecting common words, omitting subject words, the inappropriate depth of indexing, key word in permutation being in disorder, etc. The abstract has the following shortcomings: the basic elements are incomplete, the improper information is embedded, and the results are general and vague. This study points out that: the selection of key words should be mainly based on the order words in the Chinese Thesaurus, which can be appropriately matched with the scientific and technological terms and proper nouns in the new interdisciplinary, new theory and new technology, and general words should be avoided; The key words should follow the principle of "accurate selection and complete selection". Key words should be extracted from the title, abstract, level title and even the text, which can fully express the theme of the paper and have retrieval value, the number of keywords should be 4-5 and their order should follow certain logical rules. The abstract should contain four elements: purpose, method, result and conclusion; avoid using the first person, embedding background knowledge, self-opinion and subjective evaluation; the result (conclusion) part should be logical, meaningful and quantitative, so that readers can see the core value of the paper through the research results. The article also gives four steps to extract the four elements of the abstract and three common writing formats of atmospheric science academic papers.

[Purpose/Significance] "The Belt and Road" is an initiative proposed by China in recent years to cooperate and develop a community with a shared future for mankind, which has been continuously highly concerned by all circles at home and abroad. From the perspective of the citation of highly cited papers, the academic exchange of countries along the Belt and Road initiative can provide a quantitative reference for future international academic and technological exchanges, collaborative innovation and development. [Method/Process] Based on the highly cited papers among the countries along the “The Belt and Road” in the WoS database from 2013 to 2018, this paper constructed a reference matrix and analyzed the network structure, and drew a national citation network map for cluster division. Furthermore, it explored the current state of academic exchange along the “The Belt and Road” and the direction of Chinese academic output, and further analyzed the correlation between Chinese academic exchanges and trade cooperation with other 64 countries along the route. [Results/Conclusions] The research results show that the countries along "The Belt and Road" have close academic exchange and obvious "small world" characteristics. China is the core of academic exchange and the highly cited papers in many research directions in China are cited by many countries along "The Belt and Road". Besides, academic exchange and trade cooperation between China and countries along “The Belt and Road” are strongly related.

[Purpose/Significance] Science funding provides financial support for academic institutions, researchers and research projects, and at the same time plays a guiding role in the development of scientific innovation. The research of funded papers contributes to the development of the discipline and is of great significance to the encouragement and support of researchers. [Method/Process] Based on the funded papers published in Chinese journals and foreign journals in the field of library and information science (LIS) during the "13th Five-Year Plan" period, this paper analyzes from the perspectives of the time distribution of papers issued, research output of different types foundations and the research topics. [Results/Conclusions] The number of funded papers published in Chinese journals in LIS from 2016 to 2020 has decreased year by year, but the number of funded papers published in foreign journals has slowly increased year by year; for funded papers published in Chinese journal during the "13th Five-Year Plan" period, provincial (municipal) foundations funded papers are more outstanding, and National Natural Science Foundation funded papers are more notable for the number and effects of the funded papers in foreign journals; the funded papers in Chinese journals show a great impact on library services, changes and data, digital resource construction and university libraries; while funded papers in foreign journals pay more attention to social media, theme models, scientometrics and library construction.

This study used bibliometrics to analyze the characteristics of funded papers in the social sciences in Taiwan from 2015 to 2019, including the number of funded papers, funded paper ratio, document types, fields, type of publishing organizations, journal impact, and paper citation impact. The results indicate that the number of funded papers and the funded paper ratio of SSCI papers from Taiwan have both increased. In addition to articles and reviews, conference papers are a major type of funded paper for local SSCI papers. In terms of fields, the nontraditional social sciences, such as environmental sciences, psychiatry, and public/environmental & occupational health, have a particularly high funded paper ratio. However, the number of funded papers and funded paper ratio is the highest in the field of education & educational research. The fields of economics, management, and business have a large number of funded papers but a low funded paper ratio. Universities are the main funded institutions, but hospitals have the highest funded paper ratio. Funded papers tend to have higher paper citation impacts. Therefore, funding positively affects the productivity and impact of SSCI papers from Taiwan. (Article content in Chinese with English extended abstract)

Copyright of Journal of Harbin University of Science & Technology is the property of Journal of Harbin University of Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Carbon paper is one of the most commonly used materials for the gas diffusion layer of proton exchange membrane fuel cell, and its performance is the premise to ensure the stable operation of the cell. In order to improve the structure and properties of carbon paper and make it better meet the performance requirements of fuel cell, this study was conducted to press different amounts of graphite plates in the carbonization process to control the applied pressure and analyze the microstructure evolution and mechanism of carbon paper under different pressure. In addition, the effects of applied pressure on the in-plane resistivity, pore size distribution, surface roughness and mechanical properties of carbon paper were also studied. The results show that applying pressure helps to restrain the cracking of resin carbon, reduce the generation of cracks and improve graphitization degree of carbon paper to a certain extent. Furthermore, with the increase of applied pressure, the surface roughness of carbon paper is reduced gradually, while the average and maximum apertures also decrease. When the applied pressure reaches 3600 Pa, compared with the samples without pressure, the in-plane resistivity of carbon paper decreases from 17.15 mΩ·cm to 12.79 mΩ·cm, the tensile strength and flexural strength are improved by 150% and 82.9% respectively.

Writing an analysis paper on the rainstorm event (APRE) is of great significance for the professional and technical personnel engaged in weather forecast research, operations and services to fully understand the multi-scale characteristics and causes of rainstorm events. At present, APRE papers have a large amount of submissions, low writing quality and low acceptance rate, and it is more and more difficult to publish them in the core periodicals of atmospheric science (meteorology). In view of the above situation and based on experiences of the APRE manuscript editing and publishing for Torrential Rain and Disasters in recent years, taking the several typical APREs in the core periodicals in the Chinese mainland as examples, we have conducted an analysis of some problems including the difficulties and key points for title, introduction, main body, and conclusion and discussion in the writing of an APRE article, and discuss the corresponding writing skills. We expect to provide reference for the forecasters in the basic meteorological stations and related researchers to grasp the APRE article writing methods and improve the APRE article writing quality and acceptance rate.

BackgroundThe COVID-19 pandemic hints at the importance of modernizing disease control system. To understand the scientific research strength of our country's disease control system in recent years is conducive to formulating more targeted policies or measures to promote the modernization of the disease control system.ObjectiveTo understand the scientific research strength and research hotspots of China's provincial-level centers for disease control and prevention (CDCs) from 2011 to 2020, and provide evidence for the development of scientific research work, discipline construction, and talent team construction in CDCs in the future.MethodsThe Science Citation Index Expanded (SCIE) and Social Science Citation Index (SSCI) of the Web of Science Core Collection were used to retrieve SCI-indexed English papers published by 31 provincial CDCs (excluding Taiwan Province, Hong Kong and Macau Special Administrative Regions) in our country from 2011 to 2020, and to screen literature with provincial CDCs as the first affiliation for bibliometric analysis and visual analysis. Bibliometric analysis included the SCI-indexed publications of different provincial CDCs (as co-affiliation and the first affiliation), the number of SCI-indexed papers published by provincial CDCs (as the first affiliation) and funding rates by years, the high-frequency authors of SCI-indexed papers published by provincial CDCs (as the first affiliation) and their distribution, and the characteristics of the journals. Visual analysis software Citespace 5.8.R1 was used to draw keyword co-occurrence maps, cluster information tables, and emergence maps to provide information on research hotspots and their evolution.ResultsFrom 2011 to 2020, the number of SCI-indexed papers from 31 provincial CDCs was 8420 (including co-affiliation), of which 2060 papers listed provincial CDCs as the first affiliation. The provincial CDCs of Zhejiang, Jiangsu, Shanghai, Beijing, Shandong, and Guangdong were the leading six institutes in terms of the total number of SCI-indexed papers contributed as co-affiliation or the first affiliation. There was a large gap in the total number of SCI-indexed papers among the provincial CDCs. The highest total number of SCI-indexed papers contributed by provincial CDCs as the first affiliation was Zhejiang CDC (448 papers), while the lowest number was Xinjiang CDC (only 1 paper). From 2011 to 2020, the total number of SCI-indexed papers contributed by the 31 provincial CDCs as the first affiliation showed an overall increasing trend. Except for 2011, which was 63.1%, the funding rates in other years exceeded 70%. In terms of high-frequency authors, 13 first authors published ≥10 SCI-indexed papers: Zhang Yingxiu from Shandong CDC had the highest number of SCI-indexed papers (47), followed by Hu Yu from Zhejiang CDC. Zhejiang, Jiangsu, Beijing, Guangdong, Shanghai, and Shandong still ranked the top six of ≥4 first authored-SCI papers. In terms of journal characteristics, the top 20 journals with the highest number of SCI papers published a total of 862 papers, accounting for 41.8% (862/2060), and PLOS ONE ranked the first (188 papers). The research hotspots were mainly concentrated in the fields of infection, child health, and epidemiology. The main keywords of the first three cluster categories were related to the research fields of adolescent overweight and obesity, HIV, and vaccine immunity. The results of keyword emergence showed that research hotspots shifted from overweight, obesity, and body mass index to antibodies, vaccines/vaccination, and cohorts.ConclusionThe past ten years have witnessed increasing numbers of SCI-indexed papers published by provincial CDCs in our country and a stubbornly high funding rate. However, the gap among the provincial CDCs is still large seeing that economically developed eastern provincial CDCs published more SCI-indexed papers. Research hotspots have gradually shifted from overweight, obesity, and body mass index to antibodies, vaccines/vaccination, and cohorts.

[Purpose/Significance] This paper investigates the research on author name disambiguation published in recent years, and reviews the development context of relevant research from the perspective of the impact of data on author name disambiguation methods, so as to provide reference for further research. [Method/Process] The papers related to author name disambiguation were collected from English research databases such as Web of Science, Scopus, Google Academic, ACM Digital Library, IEEE Xplore, ScienceDirect, Scopus and Springer Link, and Chinese research databases such as CNKI, CQVIP and WANFANG. The search results cover the relevant papers published from 1998 to 2021. On the premise of giving consideration to authority, influence and novelty, 46 publicationswere selected for review. There are many types and structures of author name disambiguation data. For example, literature feature information is generally presented in unstructured text, and the extracted features can be stored and represented in two-dimensional tables; Citation information and interpersonal relationship are network relational data, which can be stored and represented by graphs, key value pairs or two-dimensional tables. The fundamental reason for different data structures lies in their semantic differences, but the data structure itself determines its applicable algorithm. According to the structure of characteristic data used in the author name disambiguation task and the different corresponding data processing algorithms, the relevant research is divided into three categories: 1) disambiguation method based on literature characteristics, 2) disambiguation method based on social network and 3) disambiguation method by integrating external knowledge. The impact of data on the author name disambiguation method is examined from the data level. [Results/Conclusions] The analysis found that with the progress of technology, deep learning methods have been widely used. Compared with the improvement of the model, the feature learning and representation based on deep learning can significantly improve the effect of the author name disambiguation algorithm. In addition, in order to overcome the problem of insufficient data utilization by a single method and improve the utilization efficiency of data, the three methods show the trend of mutual combination and complementary gain. From the literature research results, there are few related studies on incremental author name disambiguation and multi-language author name disambiguation, which could be one of the directions for further research.

Naturally-occurring precipitate of traditional Chinese medicine (TCM) is generally considered to be a common phenomenon. The formation of naturally-occurring precipitate originates from the interactions among different chemical components during the decoction process. Previous literature has reported the existence of naturally-occurring precipitate in Sini decoction. In this study, seven pairs of acid-base non-covalent complexes in Sini decoction were characterized using cold spray ionization-mass spectrometry (CSI-MS). The CSI device was built in house, where a stream of nitrogen gas was cooled by liquid nitrogen and used as the sheath gas, providing low-temperature ionization conditions for the MS analysis of the acid-base non-covalent complexes. The gas pipeline was equipped with a valve to regulate the nitrogen flow rate. Data acquisition was carried out using a quadrupole/Orbitrap high-resolution mass spectrometer operated in both full-scan MS and collision-induced dissociation MS/MS modes. Experimental results showed that the seven pairs of acid-base non-covalent complexes were unequivocally observed in positive and negative ionization modes. Mass spectrometric responses for each acid-base non-covalent complex varied with different chemical structures, binding abilities and ionization efficiencies. A representative pair of acid-base non-covalent complex (enoxolone/benzoylmesaconine) was selected to investigate the influence of the acid-base concentration ratio (3∶1, 2∶1, 3∶2, 1∶1, 2∶3, 1∶2, 1∶3) on the binding stoichiometry. The enoxolone/benzoylmesaconine complexes with the binding ratios of 1∶1, 1∶2, 2∶1 were observed, among which the mass spectrometric peak of the 1∶1 binding ratio was the most intensive. The non-covalent interactions of the representative enoxolone/benzoylmesaconine complex were analyzed using isothermal titration calorimetry (ITC) and computational chemistry. The thermodynamic parameters were obtained in the ITC experiment. In comparison with entropy change, the contribution of enthalpy change to Gibbs free energy was more significant, indicating that Van der Waals force and hydrogen bonding might be the main driving force in the formation of acid-base non-covalent complexes. This result was further confirmed by the docking model and simulation results of computational chemistry. Multiple hydrogen bonds derived from the interactions between specific atoms locating in the acid and base compounds promoted the self-assembly process. Moreover, Van der Waals attraction or repulsion force was generated between the C and H atoms at different positions, which in conjunction with hydrogen bonding interaction drove the formation of the acid-base non-covalent complexes. This study provides theoretical foundation and technical instruction for exploring the formation mechanism of naturally-occurring precipitate in Sini decoction.

Although the shock has long and routinely been treated, right heart and pulmonary circulation used to be the forgotten corners in clinical management. Twenty years ago, my colleagues and I published the paper Right Ventricular Function of Patients with Septic Shock: Clinical Significance and proposed the strategy of 'right heart priority', in which we took right heart as a starting point, completed whole circulation pathway of blood flow clinically with hemodynamic indicators, and performed treatment based on the hemodynamic changes at real locations, degrees and responses to therapeutic interventions. Over the past 20 years, this strategy has been confirmed by many others and practiced in many hospitals worldwide. The current treatment of shock is a continuous, dynamic, target directed quantitative hemodynamic therapy and is moving from individualized treatment towards organ targeted treatment.

Collect screen paperboard of mine power transformer and ordinary power transformer in practical lifetime cycle to make insulation test samples, and according to the standard of power, use test means such as viscosity tester, scanning electron microscopy to compare and analyze microstructures of insulation paper such as polymerization degree, surface morphology of mine power transformer and ordinary power transformer, as well as electrical properties such as partial discharge and electrical strength; at the same time, effect of microstructure changes on electrical performances during aging was discussed. The analysis results show that the insulation defects gradually form and expand in the insulation paper during the aging process; compared with the insulation paper of ordinary power transformers, the surface morphology changes of the insulation paper of mine power transformers are more obvious, and the formed defects are more significant.In the aging process, the polymerization degree of insulation paper of ordinary power transformer and mine power transformer presents a gradual decline trend, but the decline speed of polymerization degree of mine power transformer insulation paper is faster.The operating environment of mining area is the main reason that the aging of insulation paper of mine power transformer is more serious than that of ordinary power transformer.In the process of operation, the insulation paper of mine power transformer will produce more discharge quantity, more discharge times and wider discharge phase than ordinary power transformer.In the aging process, the electrical strength of insulation paper of both ordinary power transformer and mine power transformer decreases gradually, but the electrical strength of insulation paper of mine power transformer is lower than that of ordinary power transformer.The microstructural defects of insulation paper of mine power transformers are the direct causes of the more significant changes in their electrical properties.In the process of state monitoring and maintenance of power equipment, it is suggested that the insulation state monitoring of mine power transformers should be carried out strictly according to the power standards,electrical property parameters are more suitable for insulation status monitoring and fault diagnosis of mine power transformer.

[Purpose/Significance] This paper clarifies the concept of novelty, reviews different novelty measurements, and summarizes different types and research progress of novelty detection at home and abroad. It is of great significance to the development of science and scientific technological planning. [Method/Process] By summarizing existing relevant Chinese and English literature, this paper reviews the definitions of novelty, different novelty measurements such as content analysis and citation analysis, as well as their evaluation methods. [Result/Conclusion] Most of the existing methods measure the novelty from a single perspective, and few used combined methods. Therefore, both qualitative and quantitative methods should be taken into consideration to form a comprehensive analysis in the future.

The efficient AgNPs/photographic surface enhanced Raman scattering(SERS) paper substrate was prepared by inkjet printing silver ink on photographic paper, for which the wettability and surface morphology were represented by contact angle meter and scanning electron microscope(SEM). The application of AgNPs/photographic paper for detecting pesticide residues was studied by simulating the residual states of thiram on peels and in juice. It was found that thiram molecules mixed in juice or on peels could be directly recognized by the substrate without any treatment. The minimum detection concentration of thiram in juice was 0.024 mg∙L-1, in which a good linear relationship between characteristic peak intensity and concentration was obtained The detection limit of thiram on the two peels was both 0.25 ng∙cm-2. In addition, ten spots were selected from the same substrate to study the uniformity randomly. The relative standard deviations of the characteristic peak intensities at 1 142 and 1377 cm-1 of thiram were 7.8% and 5.7%, respectively. The results showed that AgNPs/photographic paper substrate had great potential in the detection of pesticide residues.

[Purpose/Significance] Combing the relevant influencing factors of the citation frequency of a single paper and the research status of the prediction of the citation frequency, this paper provides a comprehensive and systematic cognitive framework from the perspective of the involvement of scientific researchers and scientific research institutions in such research. [Method/Process] Using the literature research method, through the systematic combing of the existing literature, this paper summarized the relevant contents and characteristics of the influencing factors, research objects and research methods of citation prediction, compared and analyzed different methods by means of list, and summarized the common problems and some innovative solutions of the existing research. [Result/Conclusion] In the process of systematic combing and summarizing, it is found that the causal relationship between influencing factors and prediction results is not clear, the research sample data is lack of diversity, the relationship between the applicability of research results and prediction cycle is not clear, and the interpretability of model evaluation is weak. Therefore, we should improve the follow-up research quality from the aspects of solving the preconditions of the problem, selecting targeted samples, improving the extraction methods of influencing factors, and using mathematical thinking mode for modeling.

An automatic recognition system of paper currency serial numbers of the Republic of China was realized by deep learning in this paper. Firstly, the characters of paper currency serial numbers of the Republic of China were extracted and segmented. Secondly, pre-processing for each character was conducted and the blank character zone was clipped in order to normalize the character size.Lastly, the characters were recognized by the convolutional neural network.The experimental results showed that the paper currency serial number recognition system proposed in the paper could reduce the workload of manual entry while there were stains and wrinkles existing on the paper currency.The recognition accuracy of a single character could reach more than 99.99%.

A new method was proposed for point-of-care testing (POCT) of immunosuppressants in blood using thin-layer paper spray ionization and a miniature mass spectrometer. The aluminum thin-layer plate was used as paper spray substrate, and cut into an equilateral triangle. Aliquots of 10 μL blood sample were loaded on the aluminum thin-layer plate, and then 20 μL methanol was dropped as elution/spray solvent. The tip of the triangular plate was placed 1.0 cm in front of the discontinuous atmospheric pressure interface (DAPI) of the miniature mass spectrometer. When the spray voltage was applied, the sample was eluted from the triangular plate and formed paper spray ionization at the tip. Coupled with the miniature mass spectrometer, five immunosuppressants were detected under negative ion mode. The precursor ions ［M-H］- of tacrolimus, sirolimus, everolimus, ciclosporin A, and mycophenolic acid are m/z 802.6, 912.6, 957.1, 1 200.8, 319.1, and product ions are m/z 560.2 and 604.3, m/z 590.3 and 321.2, m/z 590.3 and 365.2, m/z 1 088.8, m/z 287.4 and 275.1, respectively. Based on the observed signal-to-noise ratio (S/N) of the most intense tandem mass spectrometry (MS/MS) fragment peaks and using the S/N=3 and 10 as the criteria, the limits of detection (LODs) and quantitation (LOQs) are estimated to be 0.5-5 mg/L and 1-10 mg/L, respectively. The internal standard method was used for quantitative analysis, and indapamide was used as the internal standard compound. Sufficient linearity for each analyte is obtained with the correlation coefficients (r) greater than 0.99. The proposed method displays good recoveries in the range of 91.0%-114.3% with the relative standard deviations (RSDs) less than 8.4%. Moreover, the developed method was used for the analysis of blood samples, which spiked with tacrolimus, sirolimus, everolimus, cyclosporine A and mycophenolic acid at the concentration of 100 mg/L. The analytical results demonstrated the consistency between the proposed method and the traditional liquid chromatography-mass spectrometry (LC-MS) method. The entire analysis procedure can be completed within 1 min. The proposed method is simple, fast, accurate, efficient, and suitable for POCT of immunosuppressants in blood. [ABSTRACT FROM AUTHOR]

[Purpose / Signficance] The current competition of comprehensive national strength relies more on fundamental research, and highly cited papers have important significance in the evaluation and analysis of fundamental research. Revealing the differences between China and USA in leading basic research from the perspective of highly cited papers, we provide basic data support for national scientific research management decision-making and institution building. [Method / Process] Based on ESI highly cited papers of China and USA, this article uses bibliometric methods and Y index to analyze the specific features and differences of China and USA among three dimensions—trends of publication, country cooperation and institutional output.[Results / Conclusions] The study shows that: (1) Overall, the highly cited papers of China is 2.99 times that of the American highly cited papers, but the gap is narrowing yearly. At the same time, the low citation frequency and the low proportion of highly cited papers are still the shortcomings that limit Chinese international influence. (2) China and USA are closely cooperating with each other. USA dominates scientific research cooperation, as the proportion of first authors and corresponding authors and leading papers is significantly higher than that in China. (3) Chinese high-output institutions have obvious advantages of corresponding authors, but the output gap between institutions is large. And the American high-output institutions are evenly distributed, and they are characterized by deeper and broader international cooperation and inter-agency cooperation.

Different phenolic resins have a direct impact on the properties of aramid paper honeycombs. It is important to study the relationship between phenolic resin and honeycomb properties. Two different phenolic resins are used to prepare aramid paper honeycomb core materials, and the compression properties, shear properties, flame retardancy and dielectric properties of the prepared honeycomb core material are tested. Combining the observation of resin end face resin distribution and contact angle measurement, the reasons for the difference in performance of honeycomb core materials prepared by two kinds of resins are analyzed. The results show that the temperature resistance of the resin itself directly affects the temperature resistance of the honeycomb and the volatilization rate of solvent water in the resin and the surface tension between the resin and the aramid paper affect the resin distribution of the resin on the honeycomb wall. When the content of the honeycomb core resin is the same, the resin rubber column at the end of the joint is beneficial to increase the compressive strength of the honeycomb core material, but the accumulation of the resin at the end of the node reduces the wall thickness of the honeycomb, resulting in a decrease in the shear strength and modulus of the honeycomb.

Taking the ultra-high-speed cigarette making and tipping machine as object， the offset adjustment and rigid-flexible coupling analysis method of the ultra-thin paper tape is studied. By using the spatial flattening projection method， the effects of the spacing of the inclined rollers or the angle of the inclined pads on the paper tape offset is investigated. The kinematics and dynamical models of the ultra-thin paper tape are built， and the elastic modulus of the paper tape is measured. Herein， a rigid-flexible coupling model of offset adjustment mechanism is developed by dispersing the paper tape into flexible body units and the roller into rigid body units. The results show that the numerical and measured lateral offsets at the output tape are consistent. These findings can be available for the offset parameters optimization and smooth conveying of the ultra-thin paper tape.

In this study, we examined the effects of cationic starch（CS） as a reinforcing agent and a binary reinforcement system with nanocellulose（NC） on the reinforcement of recycled paper produced from old corrugated cartons（OCC）. To determine an appropriate dosage of CS, we examined the effects of CS dosage on the performance of OCC recycled paper. Further, using the optimal dosage identified, the effects of its addition on the performance of OCC recycled paper were investigated by adding NC to form a binary reinforcement system. The strengthening mechanism of the CS-NC binary composite system was examined based on a combination of Fourier transform infrared spectroscopy（FTIR）, field emission scanning electron microscopy（SEM）, and thermogravimetric（TG） analyses. The results revealed that CS（1.5%） had the best enhancement effect on OCC recycled paper, with burst, tensile, and tear strengths of hand sheets being increased by 17.62%, 18.18%, and 22.93%, respectively, and air permeability being decreased by 28.55%, compared with the control group. Furthermore, we found that combined treatments with 1.5% CS and NC all enhanced the performance of OCC, with optimal effects being observed when NC was added at a 1% concentration. Compared with the improvements obtained with the sole addition of 1.5% CS, the combined treatment was found to increase the burst, tensile, and tear strengths of OCC recycled paper by a further 5.11%, 11.54%, and 13.46%, respectively, and reduced air permeability by 12.58%. The findings of FTIR analysis revealed that CS can bind to pulp fibers, and that the addition of NC increases the number of hydrogen bonds, thereby facilitating a tighter bonding between fibers. Moreover, SEM observations of the microscopic morphology of the surface of recycled paper indicated that the CS-NC binary system can contribute to a more compact and tighter inter-fiber bonding. In addition, the TG analysis results revealed that by enhancing fiber cross-linking, the CS-NC treatment could increase thermal degradation of the remaining residue of OCC recycled paper to up to 600°C. Our findings in this study indicate that treatment with a combination of CS and NC can significantly enhance the performance of OCC recycled paper. We believe that our results would provide a valuable reference for the repeated recycling of OCC. [ABSTRACT FROM AUTHOR]

Background With the deepening of health care reform in China, primary care and general practice researches have developed rapidly in recent years, and the number of papers published has increased rapidly. Objective Summarize and analyze the scientific research papers published in the field of primary care and general practice in China in 2021, explore the characteristics in the number of papers published, journals published, regions, institutions, research categories, research methods, and the number of authors. Methods Based on the disciplinary definition of the research concepts, themes and methods in this field, combining scoping review methods and bibliometric techniques, scientific research papers published by researchers in Chinese scientific research institutions in 2021 included in the CNKI, Wanfang, PubMed, and Web of Science database were retried, induced and analyzed. In this paper, combined with the scope review method and bibliometric technology, a systematic search and quantitative analysis were carried out on scientific research papers in the fields of primary care and general practice published by researchers in Chinese scientific research institutions in 2021 included in the CNKI, Wanfang, PubMed, and Web of Science databases. Results There are 3 122 original research papers published in the fields of primary care and general practice in China in 2021. The number of papers published by primary care institutions accounted for 57.69%, but most of the papers were completed by a single authoramong such institutions. Papers published by the eastern primary care institutions accounted for 80.12%. The research category is dominated by clinical research (58.23%) and health services researches (27.07%) , the co-occurrence analysis of keywords by VOSviewer shows that the research themes focus on "chronic disease management" and "contracted family doctor services", these papers mostly used randomized controlled trials (40.87%) and cross-sectional survey studies (36.71%) in research methods. The vast majority of papers in primary care and general practice field are published in non-core and non-SCI/SSCI journals (76.75%) , and only 6.98% of papers are published in SCI/SSCI journals. Conclusion The productivity level of primary care and general practice research in China has now reached the highest level in the world, of which the primary care institutions in the eastern region have made major contributions. The research topics in the primary care and general practice field are close to institutional practice and national health policy. However, there are still a series of problems and challenges in this field, such as the lack of cooperation among researchers in primary care institutions, the large number of studies using randomized controlled trial methods may have problems such as quality concerns and low recognition of research in this field in China by international SCI/SSCI journals.

The proposal of a national strategy for the "New Western Land Sea Corridor" will affect the reconstruction of the overall freight distribution pattern in western China. As the most important hub node for cargo distribution and transshipment in inland areas, the inland port (or dry port) is of great significance to regional economic development, logistics systems, and the construction of a new regional development pattern. Therefore, 111 papers on inland port research in international core journals have been selected in this study to systematically review the research status of inland ports and put forward the key directions and development trends for future research to serve the theoretical research and construction planning practice of inland ports in China, and globally. In this study, the literature metrology method is adopted to divide inland port research and development into three stages: the first stage is the initial stage (before 2005); the second stage is the slow fluctuating growth stage (2006-2017); the third stage is the rapid increase stage (2018-present). Scholars are interested in inland port research mainly from mainland China, the Netherlands, Hong Kong, the United Kingdom, the United States, and other countries (regions). Related research topics on inland ports are mostly combined with transportation, logistics, and other fields, which indicates that inland ports have become an important part of transportation systems and supply chain transportation networks. Among specific related research topics, the concept of inland ports is an important research topic, mainly focusing on the differences in naming and function, facilities of inland ports under different geographical backgrounds, and additional functions extended with economic development; however, its concept has not yet been unified. Research on the spatial layout system of inland ports shows that the inland port site selection and layout can be roughly summed up as a supply chain-oriented pattern, and industrial cluster-oriented pattern; the former often near port cargo distribution of traffic nodes, while the latter is on the border between the end of the supply chain. The location and layout of inland ports are influenced by economic foundation, transportation infrastructure, and local policy factors. Inland ports have a profound impact on the region. In terms of spatial effects, they have an impact on urban spatial planning and land use; in terms of economic effects, they can promote regional economic development and employment; in terms of environmental effects, they can reduce energy consumption and emissions, and promote the realization of regional sustainable development. In the operation and control of inland ports, special attention should be paid to the relationship between port planning and each manager, as well as to the management system, to realize the efficient, sustainable, and healthy development of inland ports. Finally, based on the new trends of global inland port logistics research and the realistic demand of China, we put forward several suggestions for future research, including the redefinition of dry ports, spatial layout and planning of inland ports, their regional influence, the port-city relationship, risk of investment, and potential benefits of inland ports.

Most studies on the vibration of variable density paper web are limited to the discussion of small deflection linear problems. There are few researches on nonlinear vibration problems with large deflection in variable density printing web.However,in practice,the density of the web is varied due to the difference in the distribution of the printed image. In this paper,the nonlinear vibration characteristics of moving printing web with variable density are studied. Based on the von Karman plate theory,the vibration equation of the large deflection motion of the axially moving paper is deduced. The differential equation is divided by the Bubnov-Galerkin method,and the differential equation is solved by elliptic integral method. The frequency expression of the nonlinear vibration is obtained. The influence of density coefficient,dimensionless velocity and aspect ratio on the complex frequency of large deflection vibration of moving paper under different initial conditions is analyzed. This study provides a theoretical basis for improving the stability of printing equipment.

Whisker multiwalled carbon nanotubes (WMWCNTs) and multiwalled carbon nanotubes (MWCNTs) were synthesized via chemical vapor deposition (CVD), and were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and Raman spectroscopy. Paper fibers were used as matrix material, WMWCNTs and MWCNTs as functional material. Paper fibers were mixed with dispersed WMWCNTs and MWCNTs by speed-cutting procedure in water. Then the composite papers were fabricated by vacuum filtration method. The electrochemical performance of the supercapacitor was tested by cyclic voltammetry, galvanostatic charge/discharge. The testing results indicate the supercapacitor has a maximum capacitance of 120F/g at a scan rate of 1mV/s and has a specific capacitance of 51.5F/g at 0.4A/g. The maximum energy density and power density reach 63.7Wh/kg and 3.99kW/kg respectively in the current range of 0.4-1.4A/g.

The purpose of this study was to investigate the extended publishing of conference papers in the field of management. The sample examined consisted of a total of 2,427 conference papers that were published in 2011 in nine international conferences spanning four academic fields, which were marketing, production and operations management, transportation management, and information management. This study adopted bibliometrics to analyze the extended publishing rate of the original conference papers, the document types of the extended publications, and the publication lag from the original conference papers to extended versions publishing. The differences between the originals and extended publications were also compared, including the changes in authorship, references, the length of articles, and the number of tables and figures. The results of the study reveal that the average extended publishing rate of the original conference papers was 17.06%, with journal articles being the major category. The average time lag for extended journal articles publishing was 27.99 months, and for submission was 14 months. This study suggested that the academic publishers provide relevant publication policy for extended publication. The journal editors and researchers should follow the guideline for submission and the editorial policy to avoid academic misconduct.