Search

To solve the environmental pollution and harm to human health caused by the use of adhesives in traditional paperboard, the development of environmentally friendly mycelium paperboard has become a hot topic. Due to the high dipole moment and hydrogen bonding between macromolecules, hyphae can form clamp shaped connection structures for nutrient reproduction and transfer, and can grow on natural agricultural waste, forming a natural biocomposite material. This study determined the combination of Ganoderma weberianum/corn straw, and designed single factor cultivation conditions such as cultivation time, straw particle size, and fructose addition to explore the effects on the mechanical properties, waterproof properties, and thermal decomposition performance of the hyphal paperboard formed by hot pressing. The optimal cultivation process was obtained through orthogonal experiments. The experimental results indicate that various factors have varying degrees of influence on the edgewise strength, flexural stiffness, and static bending strength and waterproofness of paperboard. Firstly, when the cultivation time was 30 days, the flexural stiffness reached 16.63 mN/m, which was 21.2% higher than the flexural stiffness of kraft paper (13.10 mN/m). Moreover, with the increase of cultivation time, the water absorption (24 hours) had also decreased from 3.92% to 1.27%. Secondly, previous research results have shown that the addition of fructose, glucose, and sucrose increases the biomass growth rate of strains. In this study, fructose was chosen as an exogenous nutrient, and the results showed that when a mass fraction of 5% fructose was added, the mechanical properties were the best, with a flexural stiffness of 18.87 mN/m, which was 30.5% higher than that of kraft paper (13.10 mN/m). Thirdly, the particle size of the sbstrate has a significant impact on the appearance and properties of the material. The results show that, from the appearance perspective, the mycelium paperboard made of 0.165～0.250 mm particle size has the closest appearance and feel to kraft paper. At the same time, during the testing period, it was found that the mycelium paperboard made of 0.165～0.250 mm straw was the least prone to deformation and loosening, and the molding effect was significantly improved compared to other components. In terms of mechanical properties, the edgewise strength increased by 17.4%, the static bending strength increased by 14.9%, and the flexural stiffness increased by 57.3%. The experimental results show that the degree of influence of various factors on the edgewise strength, flexural stiffness, and static bending strength of paperboard is in the order of particle size, cultivation time,fructose addition amount. When the particle size is 0.165～0.250 mm, the cultivation time is 30 days, and the fructose addition of 5.0%, the edgewise strength of the prepared paperboard is 14.36 N/mm, the static bending strength is 10.89 MPa, and the flexural stiffness is 33.09 mN/m. As the particle size decreases, the water absorption rate and water thickness expansion rate of the paperboard after 24 hours of water absorption decrease to 0.86% and 0.59%. The mycelium paperboard prepared by different single factors has the same thermal decomposition process, starting at around 150 ℃ and reaching its maximum at 350 ℃. This study provides a reference basis for the development and application of mycelium composite materials in the future. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The continuous upgrading of the automobile industry has put forward higher requirements for the performance and lightweight effect of aluminum alloys. Heat treatment is an effective way to improve the performance of aluminum alloy, but how to obtain the optimal combination of heat treatment process parameters is an urgent problem. In this paper, the influence of heat treatment process parameters (solution temperature, solution time, aging temperature, aging time) on mechanical properties was systematically studied, and the relationship model between mechanical properties and heat treatment process parameters was established. The micromorphology under different process parameters were analyzed by ESDB and SEM. The results show that when the solution temperature was 530 ℃, the solution time was 1 h, the aging temperature was 170 ℃, and the aging time was 6 h, the mechanical property of 6082 aluminum alloy profiles was the best. The yield strength was 313 MPa, the tensile strength was 350 MPa, and the elongation after break was 13.21%. The relationship model between Y value (yield strength, tensile strength, and elongation after fracture) and key process factors was established, in which the solution temperature had the greatest influence. When the solution temperature was 530 ℃, the grain size was the smallest, and the mechanical properties of the precipitated fine Mg2Si phase and Al(FeMnSi) phase were the best, and the tensile fracture was mainly the dimpled fracture. This paper provides theoretical basis and practical guidance for the optimization of heat treatment process parameters of aluminum alloy profiles. [ABSTRACT FROM AUTHOR]

Copyright of Advanced Textile Technology is the property of Zhejiang Sci-Tech University Magazines and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this paper, the effects of four different types of nucleating agents, namely, α-nucleating agent CH-6N, HPN-715, TMP-7 and β-nucleating agent TMB-5, as well as the effects of compounding of different types of nucleating agents on the mechanical, optical and crystalline properties of polypropylene were investigated. The results show that the nucleating agent can effectively increase the crystallization temperature and crystallinity. α-nucleating agent CH-6N has the best rigidity effect. The bending modulus and bending strength of polypropylene are 2 390 MPa and 60.6 MPa respectively with the addition of 0.2% CH-6N. The α nucleating agent can reduce the toughness of polypropylene. Adding 0.2% CH-6N, the impact strength of polypropylene is only 2.7 kJ/m². The β -nucleating agent TMB-5 can effectively improve the toughness of polypropylene, but reduce the rigidity. The toughening effect of 0.1 % TMB-5 is the best. The impact strength of polypropylene is 20.7 kJ/m2, and the elongation at break is 530%. In terms of optical properties, α nucleating agent CH-6N has the best modification effect, and after the addition of 0.1% CH-6N, the yellow index of polypropylene is only 0.46. The combination of α nucleating agent and β nucleating agent can not only improve the toughness of polypropylene, but also improve its rigidity, and achieve the balance of rigidity-toughness. The compound modification effect of 0.1% CH-6N and 0.1% TMB-5 is good, and the impact strength of polypropylene is 5.5 kJ/m², the bending modulus is 2 140 MPa, and the tensile strength is 41.1 MPa. [ABSTRACT FROM AUTHOR]

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Iron Steel Vanadium Titanium is the property of Iron Steel Vanadium Titanium Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Metal Working (1674-165X) is the property of Metal Working Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Plastics Science & Technology / Suliao Ke-Ji is the property of Plastics Science & Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Plastics Science & Technology / Suliao Ke-Ji is the property of Plastics Science & Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Automobile Technology & Material is the property of Automobile Technology & Material Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Mining & Metallurgy (10057854) is the property of Beijing Research Institute of Mining & Metallurgy Technology Group and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Foundry Technology (1000-8365) is the property of Foundry Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Foundry Technology (1000-8365) is the property of Foundry Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In order to explore the influence of different working conditions on the mechanical properties of dovetail joints, in this paper, the "Qing Dynasty Engineering Rules" of the Ministry of Qing Dynasty and "Wood Construction Technology of Ancient Chinese Buildings" were used as the weighing standards, using the results of wood properties tests conducted by other scholars as a reference, the numerical simulation of pseudo-static load was carried out on the dovetail joints of Qing Dynasty based on the finite element software ABAQUS. The influence of different angles outside the plane of tenon, different materials, different axial loads, and different load positions on the mechanical properties of dovetail tenon joints was investigated. The results showed that: 1) The hysteretic curves of dovetail mortise and tenon are all inverted z-shape. 2) The maximum bending moments at dovetail joints were 0.896, 0.914 kN·m and 0.979 kN·m when the lateral angles of the Fangs were 0°, 1.41° and 2.82°, respectively. When the axial load at the top of the column increases from 0 to 50 kN, the two-way maximum bending moments of dovetail joints change from 0.896 kN·m and 0.523 kN·m to 2.680 kN·m and 5.129 kN·m respectively. The two-way yield moment changed from 0.823 kN·m and 0.473 kN·m to 2.366 kN·m and 4.172 kN·m respectively. When the axial load at the top of the column increases from 50 kN to 100 kN, the changes of the two-way maximum bending moment and yield bending moment do not exceed 1%. 3) The peak viscous damping coefficients of dovetail joints corresponding to horizontal displacements of 0, 25 mm, and 50 mm applied on the beam side are 22.05%, 28.50%, and 29.38%, respectively. [ABSTRACT FROM AUTHOR]

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Foundry Technology (1000-8365) is the property of Foundry Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Foundry Technology (1000-8365) is the property of Foundry Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Foundry Technology (1000-8365) is the property of Foundry Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Atomic & Molecular Physics (1000-0364) is the property of Journal of Atomic & Molecular Physics Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Atomic & Molecular Physics (1000-0364) is the property of Journal of Atomic & Molecular Physics Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

As a multifunctional filler, carbon materials play an important role in enhancing the comprehensive properties of polypropylene composites. However, it is an important task to balance the relationship between the amount of different carbon materials and the formability and functionality of composite products. In this paper, the properties of carbon fiber, carbon nanotube and graphene, and the effects of these carbon materials on the mechanical, thermal and electrical properties of polypropylene-based multi-scale composites are discussed respectively. It is pointed out that it is a challenging research direction to prepare polypropylene composites filled with high content and hybrid carbon materials by melt deposition 3D printing process in the future. [ABSTRACT FROM AUTHOR]

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Multipurpose Utilization of Mineral Resources / Kuangchan Zonghe Liyong is the property of Multipurpose Utilization of Mineral Resources Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Due to the layer characteristics and anisotropic mechanical properties of 3D printed concrete, there is still lacking effective numerical simulation method for force analysis of 3D printed concrete. In this paper, the linear elastic constitutive parameters of 3D printed concrete anisotropic equivalent elements are deduced, based on the deformation conditions and mechanical equilibrium conditions, and based on the shear stress reciprocity theorem, the layer stress calculation method of 3D printed concrete is given. A 100 mm×100 mm×100 mm 3D printed concrete cubic block is taken as an example. The ANSYS finite element software is carried out to simulate the force performance of 3D printed concrete. The results show that the number of elements obtained by the equivalent element method is reduced by 64 times, the overall error of the displacement results can be controlled within 1%, and the calculation efficiency is increased by more than 430 times. Through the research in this paper, the finite element simulation analysis of anisotropic 3D printed concrete with layer characteristics is realized, which can greatly improve the calculation efficiency under the premise of ensuring the calculation accuracy. [ABSTRACT FROM AUTHOR]

Nickel-based superalloys are important structural materials in turbine engines and gas turbines, but their conventional fabrication processes are complex, costly and have poor raw-material-utilization rate. The electron beam powder bed fusion(EBPBF) technology is a new solution for forming superalloys, which can realize near net forming of complex structural parts. During more than ten years of development, EBPBF technology has realized the high-quality formation of superalloy materials and components represented by Inconel 718 and Inconel 625, and has continuously extended its capability to form crack-free, high-Y'-phase-portion difficult-to-weld nickel-based superalloys, and can even directly prepare single-crystal nickel-based superalloy components. In this paper, the relevant literatures on EBPBF nickel-based superalloys in recent years are reviewed, and the current research status from the perspectives of printability, process optimization, property characterization of EBPBF nickel based superalloy components are analyzed and summarized, and also the future research work is proposed. [ABSTRACT FROM AUTHOR]

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Iron Steel Vanadium Titanium is the property of Iron Steel Vanadium Titanium Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The price of alloying element Bi is low, and it has a high solid solubility in magnesium, and with the decrease of temperature, its solid solubility decreases, and the Mg3 Bi2 phase is precipitated, which improves the mechanical properties of magnesium. Therefore, Mg-Bi alloys have good solution and aging hardening potential. The addition of Sn, Mn, Al, Ca, Zn and other elements to Mg-Bi alloy can modulate the alloy microstructure and further increase the mechanical properties and corrosion resistance of the alloy. In this paper, the research progress of Mg-Bi alloys was introduced, and on the basis of summarizing the research achievements of Mg-Bi binary alloys, the microstructure and properties of Mg-Bi-Sn alloys, Mg-Bi-Mn alloys, Mg-Bi-Al alloys, Mg-Bi-Ca alloys, and Mg-Bi-Zn alloys were systematically summarized, and the effects of alloying on the second phase, grain size, texture and dynamic recrystallization of alloys were reviewed. The effects of alloying element types, addition amounts and hot working parameters on the mechanical properties of alloys were described, and the future research is prospected. The existing problems in the study of Mg-Bi alloys were summarized, and the future research was prospected. [ABSTRACT FROM AUTHOR]

Due to the large number of blind individuals and the shortage of donor corneas available for transplantation, artificial corneas have gradually become a research hotspot, However, artificial corneas often experience implant tearing due to insufficient mechanical properties. In order to solve this problem, researchers at home and abroad have tried to improve the mechanical properties of corneal repair materials by a series of research work. This paper summarizes the progress relating to the mechanical properties of four common natural polymer-based corneal repair materials, namely collagen, gelatin, silk fibroin, and chitosan. The results show that physical methods such as photo-crosslinking and thermal crosslinking, chemical methods such as 1(3-dimethylaminopropyl) -3-ethylcarbodiimide (EDC)/N-hydroxysuccinimide (NHS) crosslinking, genipine or glutaraldehyde crosslinking and other composite methods can significantly improve the mechanical properties of corneal materials, but these methods still have some shortcomings. Therefore, further development of high-quality artificial corneas is crucial. It is hoped that the article can provide some reference and ideas for the study of improving the mechanical properties of corneal repair materials through summarization. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Engineering Geology / Gongcheng Dizhi Xuebao is the property of Journal of Engineering Geology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)