Search

A high-precision mechanized seeding can greatly contribute to the vegetable production at present. In this study, a spotting glue-paper tape precision seeder was designed for the small seed vegetables, particularly combining the seed rope and printing seeding. Three components were also divided in the seeder, including the peristaltic pump glue, ratchet spotting glue, and seed metering device. Among them, the glue was a mixture of pregelatinized starch and water. Specifically, the glue volume and viscosity were the main factors affecting the number of adhered seeds. The glue point volume depended mainly on the rotation angle of the peristaltic pump during the movement. A pretest of seed adhesion was carried out to preliminarily determine the mass ratio of pregelatinized starch to water (less than 1:5), representing the glue viscosity. Furthermore, the frequency of pump and dispensing were analyzed to clarify the relationship between the peristaltic pump and ratchet speed, where the number of ratchet teeth was determined to be 4. As such, the matching was realized between the peristaltic pump and ratchet spotting glue. The ratchet profile was also designed, according to the spotting glue motion. A theoretical analysis was made on the movement of seeds in the seed guiding tube. It was found that the aggregation effect of seeds on the paper tape relied on the length and cross-sectional angle of the seed guiding tube, as well as the rotation speed of the socket wheel. The seed guiding tube was then optimized for the optimal structural parameters. A Box_Behnken test was also carried out, where the length and cross-sectional angle of the seed guiding tube, while the rotation speed of the socket wheel was taken as the test factors, whereas, the percentage of seeds in the effective area on the paper tape was taken as the test index. The results showed that the percentage of seeds in the effective area on the paper tape was 57.23%, when the length of the seed guiding tube was 56 mm, the section angle was 35°, and the rotation speed of the seed metering wheel was 30 r/min. An adhesion test was also performed on the Shanghai Qing 605 seeds with a diameter of 1.5-2.0 mm. The test factors were then selected as the roller angle of the peristaltic pump and the mass ratio of pregelatinized starch to water. An optimal combination of parameters was achieved, including the size of the glue point, and the mass ratio of pregelatinized starch to water. Once the roller rotation angle was 10° and the mass ratio of pre-gelatinized starch to water was 1:6, the single seed rate of glue point adhesion to seeds reached 97.4%. The adaptability test was also carried out on the whole machine on the working performance of different varieties of small seed vegetables. It was found that the single seed rates of Shanghai Qing 605 and Siji Chinese cabbage seeds were greater than 95% under the working speed of 0.5-1.5 m/s, whereas, the coefficient of variation of plant spacing was less than 10%, fully meeting the requirements of precision sowing indicators that specified in the standard NY/T1143-2006. Therefore, the single seed rate and the working efficiency of the improved seeder increased by 3.53%, and 50% than before. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Flow pattern is an important factor affecting fish collective behavior. In the reproductive season, schizothorax prenati will choose suitable flow area for migration, but the water conservancy project caused serious damage to its migration channel. The purpose of this study was to study the response of the collective behavior of Schizothorax prenati to the flow velocity and turbulent kinetic energy, to optimize the flow pattern and water management of the fish crossing facilities. In this paper, the Nearest Neighbor Distance (NND) and collective area were used to evaluate the cohesion of fish, and the Separation Swimming Index (SSI) was used to evaluate the repulsion of fish. In the experiment, 10 Schizothorax prenati with an average age of 3 years were selected from each group, a total of two groups, and each group was tested for 6 times. Each time allowed the fish to swim in a 3 m×14 m rectangular flume physical model (flow velocity decreased from 0.17 m/s on the left to 2.5 m/s on the right, and the turbulent energy was 0-0.225 m² /s2 ) and (16±1) ℃ water temperature. After shooting with the camera, the graph was collected to extract and analyze the swimming trajectory of the fish, at the same time, we observed the formation of fish in moving water and all collective indicators were calculated at 10-second intervals during the analysis of the fish. All coordinates recorded in a total of 12 tests were plotted as heat map, the darker the color, the more likely the fish were to cluster in that area, meanwhile, we calculated the NND, collective area and SSI of fish at all recorded times. Finally, by coupling the above three collective indexes with flow velocity and turbulent kinetic energy, the collective indexes under different hydraulics conditions were analyzed to evaluate the collective behavior of fish. The results showed that Schizothorax prenati had obvious collective behavior under specific hydraulic conditions, and its collective behavior was closely related to hydraulic factors. In this experiment, the fish mainly swam in the formation of “schooling” mode, and fish usually swam in a single partition in the experimental flume, showing a neatly arranged polar structure, and all individuals tended to swim in the same direction when the flow velocity was 0.27-0.70 m/s and the turbulent kinetic energy was 0.004-0.018 m² /s², the NND, collective area and SSI of the fish were 0-0.80 m, 0-5.00 m² and 0-1.20, and the collective behavior was the most compact and close, with better cohesion and repulsion. In the two typical swimming upstream routes, the average flow velocity and turbulence kinetic energy were basically consistent with the compact collective behavior hydraulic conditions of the Schizothorax prenati summarized in this paper, which verified the accuracy of this study. Therefore, it is recommended that engineering measures be taken to create a flow velocity of 0.27-0.70 m/s and a kinetic energy of 0.004-0.018 m² /s² in order to make the Schizothorax prenati mass migration, which allowed for a smaller flow velocity range than traditional fishway design methods. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

It is important to judge the density of pear flower accurately for automatic thinning. In order to judge the density of pear flowers precisely and achieve the purpose of automatic flower thinning, a density classification of pear flower images method based on improved density peak clustering algorithm was proposed in this study. The pear flower image samples used in the experiment were taken from the research base of Hebei Agricultural University, Niugang Village, Yi County, Baoding City, Hebei Province, and the variety was three-year-old Qiuyue. In this study, the images of pear flowers in natural environment were collected on April 18, 2021, when the pear flowers were in full bloom. The pear flower recognition images with high detection accuracy were obtained by using the depth learning model to detect the pear flower. The central coordinates of the target detection frame were extracted from the recognition images to obtain the data points that needed to be clustered. Secondly, in order to achieve the density classification of pear flower images, the method of selecting the cluster center was improved according to the shortcomings of the original density peak clustering algorithm in the density classification of pear flower and the requirements of pear flower density classification. The decision graph was divided into four parts by four groups of local density and center offset distance segmentation thresholds to select the cluster centers. These four parts corresponded to four grades of high, medium and low density and no thinning treatment. The accurate classification of pear flower images with reasonable density was realized. Finally, to solve the problem of inaccurate clustering classification of pear flower distribution with only cluster distribution, sparse distribution and large-scale close-up, the calculation method of dij parameter of distance between two points was improved. The pear flower scale and density grading standard were unified, and reasonable density grading could be achieved for all distribution types of pear flower images. The experimental results showed that the proposed algorithm could adapt to pear flower images of different scales. The accuracy of scale prediction was 94.89%, and the accuracy of density classification was 94.29%. Compared with the existing methods, the proposed method could achieve the density classification of local flower clusters in natural environment. the algorithm in this paper was compared with K-means algorithm and DBSCAN algorithm, and the accuracy of density classification was 94.29% and 68.57% respectively. Although the density classification accuracy of K-Means clustering algorithm was high, it lacked the algorithm steps to automatically select the clustering centers of different density classification, and was too sensitive to noise points. The density calculation method of DBSCAN algorithm lacked continuity, and the division of density grade was not precise enough. Based on the comprehensive analysis of density classification accuracy and cluster center selection method, the improved density peak clustering algorithm in this paper had the best effect. The clustering centers of different density grade could be automatically selected and the error of random initialization of clustering centers could be reduced. The proposed algorithm was robust to noise points and could eliminate noise points effectively. The proposed algorithm adopted soft statistics method for density calculation, which had continuity and was more accurate for density classification. It provides technical support for analyzing the density of pear flower and machine intelligent flower thinning. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract: Accurate identification of cotton top bud is important for cotton topping operation to detect cotton terminal bud accurately in field, a recognition method using Faster R-CNN (Faster Region Convolutional Neural Networks, Faster R-CNN) by integrating dynamic mechanism was proposed to solve the recognition difficulties caused by the small size of cotton terminal bud when it is topped in densely planted fields. The RegNetX-6.4GF model was used as the backbone network to improve its image feature extractor capabilities. Due to number of proposals under a higher IOU(Intersection Over Union, IOU) as well as the matching degree between anchor and the target shape affect the performance of the detector, the method proposed in this paper changed the original anchor generation mechanism by combining FPN (Feature Pyramid Network, FPN) and Guided Anchoring in RPN (Region Proposal Network, RPN), which will cause the distribution of the proposals generated by the RPN of the algorithm under different IOUs dynamically change during the training process. To adapt the dynamic change of proposals distribution, we integrated Dynamic Region Convolutional Neural Networks ( Dynamic R-CNN) in Faster R-CNN, which can dynamically adjust the value of IOU to obtain high quality proposals. And the GROIE (Generic ROI Extractor, GROIE) mechanism was inducted to extract ROI (Region of Interest, ROI) to improve the feature fusion capability. In this paper, 4 819 images of gossypium hirsutum population which contain seven leaf types were taken from the top of cotton plant at distance of 30-50 cm (medium distance) and 50-100 cm (long distance) under uniform light, oblique strong light, direct strong light, and shadows. Those images were processed as MS COCO 2017 format dataset and assigned to the training set, validation set, and test set, which contained 2 815, 704, and 1 300 pictures respectively. The experimental results demonstrated that FPS (Frames Per Second, FPS) of proposed model was up to 10.3 frames/s and the Mean Average Precision (MAP) of bud identification reached to 98.1% which was 3.2 percentage points higher than original Faster R-CNN model. The validation set were used to compare performance of mainstream recognition algorithm and proposed method. Results showed that the improved Faster R-CNN's MAP was 7.3% higher than original Faster R-CNN, which was also higher than RetinaNet, Cascade R-CNN (Cascade Region Convolutional Neural Networks, Cascade R-CNN) and RepPoints by 78.9%, 10.1% and 8.3% when IOU was set to 0.5. The improved Faster R-CNN proposed in this paper meets the accuracy and real-time requirements of cotton topping operation. [ABSTRACT FROM AUTHOR]