Search

Copyright of Journal of Harbin Institute of Technology. Social Sciences Edition / Haerbin Gongye Daxue Xuebao. Shehui Kexue Ban is the property of Harbin Institute of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

[Objectives]This paper aimed to research on the residue behavior of emamectin benzoate and pyriproxyfen in field corn and evaluate the chronic dietary risk, so as to provide suggestions for the rational use of emamectin benzoate and pyriproxyfen on corn. [Methods]In accordance with good agricultural practices(GAP), the field trials of 12% microemulsion(3% emamectin benzoate+9% pyriproxyfen, ME)on corn were carried out across 12 regions of main corn production in China. The formulation of 12% ME was sprayed once at the dosage of 45 g·hm-2 during the incubation period of corn borer eggs, and the recommended pre-harvest interval(PHI)was 21 days. Meanwhile, a method for determination of emamectin benzoate and pyriproxyfen in corn was developed based on QuEChERS and high-performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS), which was applied to detect the residue levels in field corn samples, and the chronic dietary risk was assessed based on field trial results. [Results]At the spiked levels of 0.01, 0.05, 0.1 and 1 mg·kg-1, the mean recoveries of emamectin B1a and pyriproxyfen in fresh corn, corn kernels and corn straw samples were 87%-106%, with relative standard deviations(RSD)of 2.3%-7.5% and limits of quantification(LOQ)all being 0.01 mg·kg-1. In the fresh corn and corn kernel samples harvested at 21 and 28 days after application, the terminal residue levels of emamectin B1a benzoate were less than 0.011 mg·kg-1, which were lower than the maximum residue limit(MRL)of emamectin benzoate in corn in China(fresh corn:0.05 mg·kg-1; corn kernel:0.05 mg·kg-1), and the terminal residue levels of pyriproxyfen were less than 0.01 mg·kg-1(At present, the MRL of pyriproxyfen on corn had not been set in China). The chronic risk quotients of emamectin benzoate and pyriproxyfen were 78.4% and 5.8%, respectively, which were both lower than 100%, indicating a low risk to consumer's health. [Conclusions]Under the GAP conditions of applying 12% microemulsion(3% emamectin benzoate+9% pyriproxyfen)on corn, the recommended PHI of 21 days was safe. The paper could also offer a reference for China to formulate the MRL of pyriproxyfen on corn. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Irrigation & Drainage is the property of Journal of Irrigation & Drainage Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Railway Standard Design is the property of Railway Standard Design Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Geography & Geographic Information Science is the property of Geography & Geo-Information Science Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Remote Sensing is the property of Editorial Office of Journal of Remote Sensing & Science Publishing Co. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Railway Standard Design is the property of Railway Standard Design Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The Diameter at Breast Height (DBH) (at a height of 1.3 m on the bole of a tree) has been one of the most important indicators during tree measurements in forestry resource inventory. However, the current DBH measurement cannot fully meet the requirement in recent years, due to the low portability, precision, efficiency, applicability, and stability, together with the complex operation, rudimentary software, high costs, and short range. In this study, an innovative device was developed to accurately, efficiently, and conveniently measure the tree DBH suitable for the complex tree shapes and the different diameter classes, while cost-saving in the office-field work survey. The specification of the device was as follows (size: 8.35 cm×5.80 cm×5.55 cm; weight: 230 g; resolution: 0.01 cm; linear range: 0-150 cm; battery capacity: 4 000 mAh input vatage: 3.7 V, output votuge: 5 V; micro-processor chip: STC15W4K48, 8 bits; encoder type: PD-1503-SDI, 12 bits). A Tunnel Magneto-Resistance (TMR) rotary encoder was also combined with the low-cost, small size, and light weight electro-mechanical structure, and high-resolution processing. As such, the measurement device was achieved in the electronization, digitization, portability, and integration of office and filed work for the tree DBH. A supporting system software was also developed, including the embedded software, mobile terminal application, and Web terminal application. In the process of an individual tree survey, the electro-mechanical structure of the device firstly converted the mechanical parameter of tree DBH to the magnetic signal, and then the magnetic signal was converted to an electrical signal. Secondly, the electrical signal was converted into the DBH measurement data using the processing integrated into the embedded software. Thirdly, the operation flow was better applied to measure the trees with special shapes and large diameters using multi-function key combinations. After all individual tree surveys, the DBH measurement data was transmitted by Bluetooth in the device to the Android application, and then uploaded to the database managed by the Web application. The measurement accuracy and operation efficiency of the device were verified to select the 196 standing trees with many tree species and a small sample plot of 42 standing trees in the Botanic Garden of Beijing Forestry University, China. The test results showed that the device presented a higher accuracy to measure the standing trees of different diameter classes than before. The total tree DBH measurement data from different diameter classes (weight: 1 092 g; resolution: 0.001 cm; linear range: 0-500 cm) indicated the mean absolute error (MAE) of 0.08 cm, Mean Absolute Percentage Error (MAPE) of 0.37%, Root Mean Square Error (RMSE) of 0.12 cm, and Relative Root Mean Square Error (RRMSE) of 0.54%, compared with an electronic draw-wire displacement sensor. In addition, a high measurement efficiency was achieved, where the average measurement time per person of each tree was 9.3 s from the efficiency test. The devices demonstrated nearly two times faster than the traditional diameter tape (weight: 42 g; resolution: 0.01 cm; linear range: 0-200 cm), while one time faster than the electronic draw-wire displacement sensor. Additionally, the price of the device was only 260 RMB, due to a 12 bits encoder (price: 135 RMB). In conclusion, this device behaved at a low cost and less labor consumption, fully meeting the technical requirement of accuracy for the Continuous Forest Inventory (CFI) in China. Therefore, the finding can provide broad application prospects in forestry resource inventory. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Central China Normal University is the property of Huazhong Normal University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Irrigation & Drainage is the property of Journal of Irrigation & Drainage Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objectives: Deep space antennas are widely used in deep space and radio astronomical observations, and their precise position coordinates are required for research needs. In many cases, this precise position is given by very long baseline interferometry (VLBI) based on an initial position with millimeter-scale accuracy. Global positioning system (GPS) alone is merely not sufficient to obtain the initial position of newly-built antennas. Therefore, a method using other objects as reference is needed to calibrate observatory positions, especially antenna arrays, and this paper presents such a method for deep space and radio astronomical observations. Methods: This method employs an azimuth-elevation telescope with an accurate position as a reference object to measure the center position of a target telescope. Other reference objects with satisfying position accuracy can also be used in this method. GPS receivers are adopted to establish a reference network with given scale and orientation by differential measurement. The next step is measuring the local positions of two telescopes (or objective and reference) in the reference network using total station instruments deployed in several different locations. Calculations are induced during the transfer of positions in the reference system to unify data from those measurements. The position of the target to the reference object in a local coordinate system is obtained. The final step is the calculation of the coordinates of the tar⁃ get telescope through the accurate position of the reference telescope. A series of processes are used to con⁃ vert coordinate positions from the local reference system to the international terrestrial reference frame 2014 (ITRF2014) reference system. Results: Experimental measurement was carried out to obtain the coordinates of the 40 m diameter radio telescope in national observatory of China (NAOC) Miyun observatory with the 50 m diameter radio telescope also there as a reference object. Total station measurement was con⁃ ducted at three locations around the reference telescope and four locations around the target telescope. Two reflecting prisms calibrated by GPS devices were used as scale and orientation reference. Total station targets were placed on azimuth and elevation structures of both telescopes. The target position data were obtained when the telescope rotated and tilted at multiple angles. More than 400 times of measurement were taken during a two ⁃ day field experiment. Round ⁃ fitting and sphere ⁃ fitting achieved by the trust-region method were used to process measured points, and the coordinates of the 40 m diameter radio telescope in NAOC Miyun observatory were given with a calibration error of 2.312 mm (root mean square error， RMSE) in the ITRF2014 system. Conclusions: This method provides center point location in mm or sub-mm-scale precision in complex terrain situations with simple tools and low time cost. The measurement of total station instruments towards reference objects or target objects could be the direct or centering measurement. This method can be applied to obtain positions of single or multiple antennas for observation and further calibration. Observatories can apply this method in complex terrain locations such as mountains, rocky fields, and even a meteor crater on an extra-earth planet. Subsequent observations show that this calibration has met the need. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Harbin Institute of Technology. Social Sciences Edition / Haerbin Gongye Daxue Xuebao. Shehui Kexue Ban is the property of Harbin Institute of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper introduces a method which utilizes global navigation satellite system (GNSS) based precision point positioning (PPP) for conducting long-term tilt and settlement monitoring of high-rise buildings in North China. Two-year continuous GNSS observations from two high-rise buildings near a deep foundation pit in Beijing are used for the case study. The method comprises four steps: ① Calculating the geocentric coordinates (XYZ) of the GNSS antenna with respect to a global reference frame (e.g., IGS08) with the PPP method; ② transforming the geocentric coordinates to a regional reference frame − the North China reference frame (NChina16); ③ converting the geocentric XYZ coordinates to a station-centric East -North- Up (ENU) coordinates; ④ removing seasonal ground-surface deformation from the ENU time series and restoring the true displacements (tilt and settlement) of the building. Experimental result indicates that the PPP method is able to achieve 2-3 mm horizontal accuracy(root mean square error) and 6-9 mm vertical accuracy (root mean square error)for 24 - hour continuous observations in North China. The combination of PPP, NChina16, and the North China seasonal ground deformation model can perform millimeter-accuracy, nearreal time, and long term static structural health monitoring of high-rise buildings and other large-scale infrastructure projects in North China. [ABSTRACT FROM AUTHOR]

GPT2w model is commonly used to calculate the meteorological parameters at certain location, such as temperature, weighted mean temperature, pressure and vapor pressure. It is also the public empiri- cal model for tropospheric delay with the best nominal accuracy. In this paper, meteorological sounding da- ta from 2013—2015 of 86 stations in China is used, which have participated the global meteorological ex- change. Precisions of meteorological parameters from GPT2w are examined and analyzed. It turns out that the average bias (Bias) and root mean square error (RMS) of temperature are 1.31 ℃ and 3.62 ℃ , respec- tively. For weighted mean temperature, the Bias is －1.58 K and the RMS is 4.07 K. For pressure and va- por pressure, the absolute values of Bias are smaller than 1 hPa, and the RMS are 6.98 hPa and 3.04 hPa, respectively. Using the data from 2006—2015, periodic characterization of the accuracy of different latitude models are analyzed. It turns out that the RMS of temperature, weighted mean temperature, pressure and vapor pressure shows certain periodic patterns, and differs with different latitude regions. In general, GPT2w model exhibits high precision and stability within the area of China. [ABSTRACT FROM AUTHOR]

Alfalfa plays an important role in dairy farms for economic and ecological reasons in northwest China. In order to manage the complex relations between alfalfa growth and environmental issues accurately and timely, the alfalfa simulation model has been widely studied. An alfalfa growth simulation model based on water and nitrogen factors (ALFSIM-WN) was proposed. The model was divided into 3 sub-models, including crop dynamic sub-model, water balance sub-model and nitrogen balance sub-model using modular design method. It took alfalfa in Ningxia irrigation area of Yellow River as research object and could simulate the growth dynamics of alfalfa under different water supply and variable fertilization. It also could estimate the yield of alfalfa. In order to verify the accuracy and applicability of ALFSIM-WN, experiments were carried out at grassland experiment area of Maosheng Grass Limited Company in Yinchuan (northwest China, 3855N, 10606 E). The experimental alfalfa was Medicago sativa No.7. The irrigation methods included surface irrigation and subsurface drip irrigation. A split plot was designed as 2 experimental treatments. The 1st treatment was the irrigation amount which was divided into 5 irrigation levels including the surface irrigation (1 199 mm) and the subsurface drip irrigation (525, 600, 675, 750 mm). The 2nd treatment was nitrogen application rate which included 4 nitrogen application levels (0, 60, 120, 180 kg/hm2). A total of 17 treatments were designed in experiment. Different irrigation levels were carried out in batches according to different cuts and different growth period of alfalfa. Different nitrogen application levels were carried out in different cuts. Through 2 years experiments (2016-2017), model parameters had been determined using data from 2016, and growth parameters of alfalfa (such as growth period, leaf area index, soil moisture dynamics and yield) had been predicted based on gathering meteorological date, soil data and field management data of 2017. The comparison between simulated and observed was taken in this paper. The results showed that the simulated values by the model was in agreement with the trend of the observed values under different irrigation and nitrogen treatments, such as growth period, leaf area index, soil water content and yield of the alfalfa. Alfalfa in Ningxia irrigation area of Yellow River could harvest 3 to 4 times per year, the mean relative error of the growth period of alfalfa in 4 cuts simulated by the model was between 1.9% and 5.7%, which was consistent with the local growth period for forage. In addition, through analyzing the 4 cuts data in 2017, the mean relative error of leaf area index simulated by the model was between 2.3% and 17.6%, the mean relative error of soil water content simulated by the model was between 2.3% and 17.6%, and the mean relative error of yield simulated by the model was between 1.7% and 16.2%. The root mean square error of the leaf area index was between 0.09 and 0.44, the root mean square error of soil water content is between 0.009 and 0.039 cm3/cm3, and the root mean square error of yield was between 0.3 and 2.3 t/hm2. Therefore, the ALFSIM-WN had higher simulation accuracy in simulated growth period, leaf area index, soil water content and yield, indicating that the model has good application in Ningxia irrigation area of Yellow River and can be used as an effective simulation tool for alfalfa growth in forage planting. [ABSTRACT FROM AUTHOR]

Copyright of Chinese Journal of Pesticide Science / Nongyaoxue Xuebao is the property of Chinese Journal of Pesticide Science and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Natural Resources / Ziran Ziyuan Xuebao is the property of Journal of Natural Resources and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)