Search

Lubrication is often employed in fretting contacts to reduce wear and stresses associated with high friction. Owing to the very small displacements associated with fretting, penetration of lubricating oils into the contact may not be effective. The efficacy of the penetration of the lubricant into the contact is very difficult to observe experimentally, and accordingly, this paper presents a numerical simulation of a lubricated fretting contact using a Coupled–Eulerian–Lagrangian (CEL) finite element method. Meso-scale CEL finite element models are developed to simulate the cylinder-on-flat arrangement used experimentally at the University of Nottingham in which the roughness of contact surfaces is characterized as fractal geometry by the Weierstrass-Mandelbrot (W-M) function. The fluid–solid and solid–solid contact in the lubricated fretting contact are simulated, and from these, wear and friction coefficients are determined. The effects of contact geometry on lubricated fretting contacts and lubricant on fretting wear are modelled and compared with experimental observations. Results indicate that oil lubrication reduces fretting wear and friction effectively in the less-conforming contacts but has little effect in the more-conforming contacts. • A novel approach of modeling lubricated contacts using a CEL finite element method. • The efficacy of the penetration of lubricant into the fretting contacts is simulated. • The wear and friction coefficients in a lubricated fretting contact are determined. • The effects of contact geometry on lubricated fretting contacts are simulated. [ABSTRACT FROM AUTHOR]

The textured surface is one of the hotspots in the field of tribology research on reducing friction and wear. By calculating and optimizing the micro-texture structure, researchers designed and prepared textures with excellent tribological properties on the mechanical part surfaces. In this work, the tribological performance of 42CrMo matrix composite textured surfaces (CTSs) with different textured densities under grease lubrication was studied. The CTS was composed of 42CrMo alloys and SnAgCu-MXenes-Ti 3 C 2 (SACM). The results showed that when the textured density ρ of CTS was 36%, the friction coefficient (0.090) and wear rate (5.4 × 10−9 mm3N−1m−1) of counterpart ball could be respectively reduced by 75.7% and 38.6% compared with those of counterpart ball against the untextured sample. CTS could enhance the stability of friction system. Mxenes-Ti 3 C 2 wrapped by SnAgCu could form the lubricating layer containing sub-micron rollers on the worn surface, effectively reducing the friction and wear of samples under grease conditions. [Display omitted] • The composite textured surfaces (CTSs) were designed and prepared. • MXenes wrapped by SnAgCu could form sub-micrometer rollers in wear scar. • CTS exerted tribological enhancement function under starvation. • CTS could produce excellent synergistic effect with grease. [ABSTRACT FROM AUTHOR]

Nitrile butadiene rubber (NBR) is a water-lubricated bearing material that demonstrates excellent vibrational absorption and impact resistance; however, rapid wear under abnormal conditions is still a serious problem. Graphene (Gra) and carbon nanotubes (CNTs) are two types of carbon nanomaterials with different dimensions and excellent mechanical and friction properties. In this work, Gra and CNTs were used to fill the NBR, and a multifunctional friction and wear testing machine was used to study their impacts on the friction between NBR and ZCuSn10Zn2 under water lubrication conditions. The results indicate that both Gra and CNTs can effectively reduce the adhesion and the friction coefficient of NBR during the friction process. The two-dimensional lamellar structure of Gra is more likely to precipitate from the NBR matrix to generate a surface lubrication film, which can effectively reduce the friction coefficient. Both Gra and CNTs can prevent crack initiation and propagation in NBR during the wear process, thereby effectively reducing the wear of NBR. Compared with the two-dimensional structure of Gra, the one-dimensional linear structure of carbon nanotubes can "trap" the NBR molecular chains more effectively during the friction process, thus reducing the initiation and propagation of wear cracks and further improving the wear performance of NBR. • Effect of different dimensions of carbon nanomaterials on friction behavior of NBR. • Effect mechanism of two-dimensional graphene and one-dimensional carbon nanotubes on friction behavior of NBR. • NBR wear mechanism enhanced by two-dimensional graphene and one-dimensional carbon nanotubes. [ABSTRACT FROM AUTHOR]