Search

Urban water quality management often requires use of numerical models allowing the evaluation of the cause-effect relationship between the input(s) (i.e. rainfall, pollutant concentrations on catchment surface and in sewer system) and the resulting water quality response. The conventional approach to the system (i.e. sewer system, wastewater treatment plant and receiving water body), considering each component separately, does not enable optimisation of the whole system. However, recent gains in understanding and modelling make it possible to represent the system as a whole and optimise its overall performance. Indeed, integrated urban drainage modelling is of growing interest for tools to cope with Water Framework Directive requirements. Two different approaches can be employed for modelling the whole urban drainage system: detailed and simplified. Each has its advantages and disadvantages. Specifically, detailed approaches can offer a higher level of reliability in the model results, but can be very time consuming from the computational point of view. Simplified approaches are faster but may lead to greater model uncertainty due to an over-simplification. To gain insight into the above problem, two different modelling approaches have been compared with respect to their uncertainty. The first urban drainage integrated model approach uses the Saint-Venant equations and the 1D advection-dispersion equations, for the quantity and for the quality aspects, respectively. The second model approach consists of the simplified reservoir model. The analysis used a parsimonious bespoke model developed in previous studies. For the uncertainty analysis, the Generalised Likelihood Uncertainty Estimation (GLUE) procedure was used. Model reliability was evaluated on the basis of capacity of globally limiting the uncertainty. Both models have a good capability to fit the experimental data, suggesting that all adopted approaches are equivalent both for quantity and quality. The detailed model approach is more robust and presents less uncertainty in terms of uncertainty bands. On the other hand, the simplified river water quality model approach shows higher uncertainty and may be unsuitable for receiving water body quality assessment. [ABSTRACT FROM AUTHOR]

Numerical modelling can be a useful tool to assess a receiving water body's quality state. Indeed, the use of mathematical models in river water quality management has become a common practice to show the cause-effect relationship between emissions and water body quality and to design as well as assess the effectiveness of mitigation measures. In the present study, a hydrodynamic river water quality model is presented. The model consists of a quantity and a quality sub-model. The quantity sub-model is based on the Saint Venant equations. The solution of the Saint Venant equations is obtained by means of an explicit scheme based on space-time conservation. The method considers the unification of space and time and the enforcement of flux conservation in both space and time. On the other hand, the quality sub-model is based on the advection dispersion equation. Particularly, the principle of upstream weighting applied to finite difference methods is employed. This method enable us to reduce the numerical dispersion avoiding oscillation phenomena. The optimal weighting coefficient was calculated on the basis of the mesh Peclet number. Regarding the quality processes, the model takes into account the main physical/chemical processes; these are degradation of dissolved carbonaceous substances, ammonium oxidation, algal uptake and denitrification, dissolved oxygen balance, including depletion by degradation processes and supply by physical reaeration and photosynthetic production. To properly simulate the river water quality, four state variables were considered: DO, BOD, NH4, and NO. The model was applied to the Savena River (Italy), which is the focus of a European-financed project for which quantity and quality data were gathered. A sensitivity analysis of the model output compared to the model input or parameters was carried out. [ABSTRACT FROM AUTHOR]

Water quality modelling is of crucial importance for the assessment of physical, chemical, and biological changes in water bodies. Mathematical approaches to water modelling have become more prevalent over recent years. Different model types ranging from detailed physical models to simplified conceptual models are available. Actually, a possible middle ground between detailed and simplified models may be parsimonious models that represent the simplest approach that fits the application. The appropriate modelling approach depends on the research goal as well as on data available for correct model application. When there is inadequate data, it is mandatory to focus on a simple river water quality model rather than detailed ones. The study presents a parsimonious river water quality model to evaluate the propagation of pollutants in natural rivers. The model is made up of two sub-models: a quantity one and a quality one. The model employs a river schematisation that considers different stretches according to the geometric characteristics and to the gradient of the river bed. Each stretch is represented with a conceptual model of a series of linear channels and reservoirs. The channels determine the delay in the pollution wave and the reservoirs cause its dispersion. To assess the river water quality, the model employs four state variables: DO, BOD, NH4, and NO. The model was applied to the Savena River (Italy), which is the focus of a European-financed project in which quantity and quality data were gathered. A sensitivity analysis of the model output to the model input or parameters was done based on the Generalised Likelihood Uncertainty Estimation methodology. The results demonstrate the suitability of such a model as a tool for river water quality management. [ABSTRACT FROM AUTHOR]

Over the last few years there has been a growing attention regarding the receiving water body quality state. As a matter of a fact, the Directive 91/271 of the European Union (EU) replaced the "emission standard" concept that fixes discharge limits depending on polluting emission characteristics, with the "stream standard" concept that fixes discharge limits for each polluting substance depending on self-depurative characteristics of the RWB. In this context, several WWTPs need to be upgraded in order to meet stricter effluent limits. The need of WWTP upgrading was also emphasized by the growing urbanization that have led, in most cases, to get overloaded WWTP due to an overcoming of the maximum WWTP capacity. In order to upgrade existing WWTP basically two main possibilities can be chosen: building new tanks or modify the WWTP by introducing new technologies such as the HMBBR systems. In this paper, such latter possibility was explored and as a case study an existing Italian WWTP (Acqua dei Corsari) located in Palermo (IT) was analysed. The main goal was to test the effectiveness of HMBBR systems with respect to the WWTP upgrading. The survey was carried out by means of model simulation and an HMBBR pilot plant. This latter was employed for the evaluation of the model parameters as well as kinetic coefficients for the HMBBR. The model results are encouraging towards the WWTP upgrading by means of HMBBR. As a matter of fact, the model simulation results showed that the WWTP maximum capacity can be upgraded from 480,000 up to one million PE. [ABSTRACT FROM AUTHOR]

Sewer systems convey mostly dry weather flow, coming from domestic and industrial sanitary sewage as well as infiltration flow, and stormwater due to meteoric precipitations. Traditionally, in urban drainage two types of sewer systems are adopted: separate and combined sewers. The former convey dry and wet weather flow separately into two different networks, while the latter convey dry and wet weather flow together. Which is the best solution in terms of costbenefit analysis still remains a controversial subject. The present study was aimed at comparing the pollution loads discharged to receiving bodies by Wastewater Treatment Plant (WWTP) and Combined Sewer Overflow (CSO) for different kinds of sewer systems (combined and separate). To accomplish this objective, a comparison between the two systems was carried out using results from simulations of catchments characterised by different dimensions, population densities and water supply rate. The analysis was based on a parsimonious mathematical model able to simulate the sewer system as well as the WWTP during both dry and wet weather. The rain series employed for the simulations was six years long. Several pollutants, both dissolved and particulate, were modelled. The results confirmed the uncertainties in the choice of one system versus the other, emphasising the concept that case-by-case solutions have to be undertaken. Further, the compared systems showed different responses in terms of effectiveness in reducing the discharged mass to the RWB in relation to the particular pollutant taken into account. [ABSTRACT FROM AUTHOR]

The objective of this paper is the definition of a methodology to evaluate the impact of the temporal resolution of rainfall measurements in urban drainage modelling applications. More specifically the effect of the temporal resolution on urban water quality modelling is detected analysing the uncertainty of the response of rainfall-runoff modelling. Analyses have been carried out using historical rainfall-discharge data collected for the Fossolo catchment (Bologna, Italy). According to the methodology, the historical rainfall data are taken as a reference, and resampled data have been obtained through a rescaling procedure with variable temporal windows. The shape comparison between 'true' and rescaled rainfall data has been carried out using a non-dimensional accuracy index. Monte Carlo simulations have been carried out applying a parsimonious urban water quality model, using the recorded data and the resampled events. The results of the simulations were used to derive the cumulative probabilities of quantity and quality model outputs (peak discharges, flow volume, peak concentrations and pollutant mass) conditioned on the observation according to the GLUE (Generalized Likelihood Uncertainty Estimation) methodology. The results showed that when coarser rainfall information is available, the model calibration process is still efficient even if modelling uncertainty progressively increases especially with regards to water quality aspects. [ABSTRACT FROM AUTHOR]

In the past, emission standard indicators have been adopted by environmental regulation authorities in order to preserve the quality of a receiving water body. Such indicators are based on the frequency or magnitude of a polluted discharge that may be continuous or intermittent. In order to properly maintain the quality of receiving waters, the Water Framework Directive, following the basic ideas of British Urban Pollution Manual, has been established. The Directive has overtaken the emission-standard concept, substituting it with the stream-standard concept that fixes discharge limits for each polluting substance depending on the self-depurative characteristics of receiving waters. Stream-standard assessment requires the deployment of measurement campaigns that can be very expensive; furthermore, the measurement campaigns are usually not able to provide a link between the receiving water quality and the polluting sources. Therefore, it would be very useful to find a correlation between the quality status of the natural waters and the emission-based indicators. Thus, this study is aimed to finding a possible connection between the receiving water quality indicators drawn by environmental regulation authorities and emission-based indicators while considering both continuous (i.e. from the wastewater treatment plants) and intermittent pollution discharges (mainly from combined sewer overflows). Such research has been carried out by means of long-term analysis adopting a holistic modelling approach. The different parts of the integrated urban drainage system were modelled by a parsimonious integrated model. The analysis was applied to an ephemeral river bounding Bologna (Italy). The study concluded that the correlation between receiving water quality and polluting emissions cannot be generally stated. Nevertheless, specific analyses on polluting emissions were pointed out in the study highlighting cause-effect link between polluting sources and receiving water quality. [ABSTRACT FROM AUTHOR]

In the past three decades, scientific research has focused on the preservation of water resources, and in particular, on the polluting impact of urban areas on natural water bodies. One approach to this research has involved the development of tools to describe the phenomena that take place on the urban catchment during both wet and dry periods. Research has demonstrated the importance of the integrated analysis of all the transformation phases that characterise the delivery and treatment of urban water pollutants from source to outfall. With this aim, numerous integrated urban drainage models have been developed to analyse the fate of pollution from urban catchments to the final receiving waters, simulating several physical and chemical processes. Such modelling approaches require calibration, and for this reason, researchers have tried to address two opposing needs: the need for reliable representation of complex systems, and the need to employ parsimonious approaches to cope with the usually insufficient, especially for urban sources, water quality data. The present paper discusses the application of a bespoke model to a complex integrated catchment: the Nocella basin (Italy). This system is characterised by two main urban areas served by two wastewater treatment plants, and has a small river as the receiving water body. The paper describes the monitoring approach that was used for model calibration, presents some interesting considerations about the monitoring needs for integrated modelling applications, and provides initial results useful for identifying the most relevant polluting sources. [ABSTRACT FROM AUTHOR]

In recent years, limitations linked to traditional urban drainage schemes have been pointed out and new approaches are developing introducing more natural methods for retaining and/or disposing of stormwater. These mitigation measures are generally called Best Management Practices or Sustainable Urban Drainage System and they include practices such as infiltration and storage tanks in order to reduce the peak flow and retain part of the polluting components. The introduction of such practices in urban drainage systems entails an upgrade of existing modelling frameworks in order to evaluate their efficiency in mitigating the impact of urban drainage systems on receiving water bodies. While storage tank modelling approaches are quite well documented in literature, some gaps are still present about infiltration facilities mainly dependent on the complexity of the involved physical processes. In this study, a simplified conceptual modelling approach for the simulation of the infiltration trenches is presented. The model enables to assess the performance of infiltration trenches. The main goal is to develop a model that can be employed for the assessment of the mitigation efficiency of infiltration trenches in an integrated urban drainage context. Particular care was given to the simulation of infiltration structures considering the performance reduction due to clogging phenomena. The proposed model has been compared with other simplified modelling approaches and with a physically based model adopted as benchmark. The model performed better compared to other approaches considering both unclogged facilities and the effect of clogging. On the basis of a long-term simulation of six years of rain data, the performance and the effectiveness of an infiltration trench measure are assessed. The study confirmed the important role played by the clogging phenomenon on such infiltration structures. [ABSTRACT FROM AUTHOR]

Three Sicilian wastewater treatment plants were monitored to assess the occurrence and the behaviour of radionuclides. Two sampling campaigns (screening and long-term) were carried out during which liquid and solid samples have been analysed. It was found that 131I mostly occurred in the samples analysed during the screening campaign (43% of the analysed samples contained 131I). High 131I specific activity was found in the mixed liquor, recycled sludge and dehydrated sludge samples. This finding was mainly due to the tendency of 131I to be associated with solid particles. During the long-term sampling campaign an influence of the sludge retention time (SRT) on the 131I behaviour was found. Increasing the SRT and consequently decreasing the fraction of active organic biomass inside the system, the specific activity of 131I decreases. [ABSTRACT FROM AUTHOR]

Over the last decade new technologies are emerging even more for wastewater treatment. Among the new technologies, a recent possible solution regards Moving Bed Biofilm Reactors (MBBRs) that represent an effective alternative to conventional processes. More specifically such systems consist in the introduction of plastic elements inside the aerobic reactor as carrier material for the growth of attached biomass. Recently, one of the mostly used alternatives is to couple the Moving Bed Biofilm Reactor (MBBR) process with the conventional activated sludge process, and the resulting process is usually called HMBBR (Hybrid MBBR). In the MBBR process the biofilm grows attached on small plastic elements that are kept in constant motion throughout the entire volume of the reactor. Indeed, in such a system, a competition between the two biomasses, suspended and attached, can arise for the availability of the substrates, leading, as a consequence, to a modification in the biokinetic parameters of the two biomasses, compared to that of a pure suspended or attached biomass process. This paper presents the first results of a study aimed at estimating the kinetic heterotrophic constants in a HMBBR pilot plant using respirometric techniques. The pilot plant was built at the Acqua dei Corsari (Palermo) wastewater treatment plant and consisted of two parallel lines realized in a pre-anoxic scheme, in one of which the carrier material was added to the aerobic reactor with a filling ratio of 30%. [ABSTRACT FROM AUTHOR]

The paper presents the comparison between the traditional activated sludge system (AS) and a hybrid moving bed biofilm reactor (HMBBR). In particular, an experimental campaign has been carried out at the WWTP in Palermo (Italy), on a pilot plant consisting of two pre-anoxic schemes. The aerated tank of the HMBBR line was filled with suspended carriers (AnoxKaldnes® K1), with a 30% filling ratio. The hydraulic load of the HMBBR line was increased up to two times the AS one. Further, in order to distinguish the additional contribution of the attached biomass for the HMBBR system, in the two lines the Mixed Liquor Suspended Solids (MLSS) was maintained as equal as possible. The monitoring period lasted three months during which several parameters were monitored. The obtained results showed a good treatment ability of the HMBBR system, referring to the organic matter removal as well as to the ammonium removal. In particular, in spite of the increase of the hydraulic load for the HMBBR line, the two systems showed a similar performance in terms of both organic and nitrogen removal. The results demonstrate the higher treatment capacity of the HMBBR addressing such system as an effective technology for the upgrading of overloaded wastewater treatment plants. [ABSTRACT FROM AUTHOR]

In this study, diffuse and point source pollutant loads were evaluated using an Italian case study: the Nocella catchment, which has been subject to extensive monitoring. The Nocella catchment is located in Sicily (Italy) and has an area of about 60km2. The river receives wastewater and stormwater from two urban areas drained by combined sewers. The two sewer systems, two wastewater treatment plants and a river reach were monitored during both dry and wet weather periods. Thereafter, an integrated catchment-scale model was applied to simulate point pollutant sources, i.e., pollution coming from the urban drainage system, and nonpoint pollutant sources, i.e., pollution coming from agricultural and wildlife activities. Different models were combined and long-term simulations were carried out in order to reconstruct the total pollutant loads discharged into the receiving water body and identify the roles of the different pollutant sources. This study demonstrates the complexity of water quality assessment in partially urbanised natural basins where neither point nor nonpoint sources can be neglected. Point sources are mainly responsible for acute oxygen demanding polluting impact during wet weather periods, and both point and nonpoint sources are responsible for the impact of nutrients on the receiving water body. [ABSTRACT FROM AUTHOR]